Tender for External Painting Work of A, B, D and E blocks (including Civil Repair Works in B, D and E blocks) at Staff Quarters, NABARD Gardens, Poojappura Thiruvananthapuram, 695012.

Providing and errecting strong, self supporting and safe two leggeded scaffolding using MS Pipes with clamp fixing type , staircase and walkway to facilate working/ inspection at all level. The double scaffolding with a minimum spacing of 600 mm c/c between parallaed rows and vertical memebrs at maximum spacing of 1200 mm c/c and horizontal bracing at maximum spacing of 900 mm c/c with properly supported platforms of aluminium planks to work at various levels. The scaffolding shall not be supported on the building/ structure. The scaffolding shall be reatained till the completion and of the work including curing, painting, inspection, insertion of caplets, drilling holes etc. The MS poles and clamps to be painted and kept in condition.

Providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of M/s Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as appproved by Engineer In charge

Surface treatment with 20 mm thick plastering to existing masonry walls with waterproofing chemicals in lime modified mortar 1:4 (1 cement : 4 sand), including scaffolding, rounding of all corners wherever required, smooth rendering, curing, etc. complete at all heights and as per the instruction of the Engineer-in charge. The rate shall include dismantling old plaster or skirting raking out joints, making V cutting in plastered surface, and cleaning the surface for plaster, cleaning the existing wall surface with air and water jet. including disposal of rubbish to the dumping ground within 50 metres lead (measurements for patches for more than 0.1 sq.m only)

Surface treatment with Cement mortar polymer plaster 20 mm thickness in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in- charge. Measurement and payment: The pre- measurement of thickness shall be done just after the surface preparation as directed at by Engineer at site etc complete. (measurements for patches for more than 0.1 sq.m only)

Finishing walls with Acrylic Smooth exterior emulsion paint ofapproved make or brand of premium quality of required shade two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm of all extrnal surfaces after removing and cleaning old cement paint, dirt, algae, fungus, shrubs, etc. completely, by scrapping with wire brush and washing with water and applying one coat of Exterior Wall Primer for Apex exterior emulsion as per manufacturer's instructions including scaffolding, cost of all materials, labour charges etc. complete as directed.

Synthetic Enamel Paint for Wood and Metal Surfaces: Removing by scrapping blistered paint completely and preparing the old painted surfaces suitably as directed and providing and applying one or more coats of first quality synthetic enamel paint of approved manufacturer and shade to teak wood / commercial board surfaces in doors, windows and ventillators as per specification and finishing smoothly including applying one coat of primer to the new or old surfaces as required at site, including scaffolding, all materials, labour charges etc. complete as directed

BLOSSOM CREATORS (BID ID -3117453)

DUROLAC (BID ID -3118478)

pavilius buildtech (BID ID -3117664)

Phoenix Facility Management Service (BID ID -3117188)