REPAIR AND MAINTENANCE OF MANUAL OPERATED HANGER DOORS, SHUTTERS, DESLUDGING OF SEWAGE SUMPS AND REPAIR AND MAINTENANCE OF SEWAGE INSTALLATIONS AND SOLAR WATER HEATERS AND MISC E/M WORKS FOR IMPROVEMENT OF E/M SERVICES IN TECH AND DOMESTIC AREA

Amount

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft and loose soil complete all as specified and directed .

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in any type of soil complete all as specified and directed .

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed .

Material and labour for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supply and laying precast concrete cable cover, class LV type 1 made of M-30 using 20mm graded stone aggregate, flat of size 250mmx150mmx40mm, complete all as specified and directed.

Dismantling and taking down solar water heater system after disconnecting electric and water supply connection and opening of 200 ltrs capacity solar water heating system made up of 2 Nos 100 ltrs capacity solar collector and opening and separating each collector of 100 ltrs capacity from the existing frame by unscrewing the flange joint , dismantling and taking out top cover made out of toughened glass from the top of the solar collector for cleaning the inner copper tube with the help of electric driven mono block pump set by using de-scaling chemical solution and giving adequate pressure of water till the deposited silt is thrown out from the tubes and drying out with the help of blower and finally removing the dust particles with the help of vacuum cleaner including replacement of unserviceable nut bolts, dead flanges, gasket etc and refitting the same in original pattern and testing, complete all as directed.

Supply and fixing in replacement of heating element of capacity 3 KW with thermostat from the hot water tank by opening the outer frame of the tank, draining out the hot water and replacement of heating element of capacity 3 KW with thermostat complete all as directed.

Dismantling and refixing of hot water tank capacity 400/500 ltrs from the unit and taking out the inner tank for de-scaling and necessary welding for checking leakages including providing fresh lagging and outer aluminum sheet cover of original gauge and sill, complete all as specified and directed.

Dismantling and re-fixing of hot water tank capacity 200 ltrs from the unit and taking out the inner tank for de-scaling and necessary welding for checking leakages including providing fresh lagging and outer aluminum sheet cover of original gauge and sill, complete all as directed.

M & L for replacement of flat plate collector based on indirect transfer of heat suitable for 100 LPD capacity solar water heater ISI MARKED, complete all as directed. Make- Tata BP/ solar India Technologies Pvt Ltd or equivalent.

M & L for replacement of flat plate collector based on indirect transfer of heat suitable for 200 LPD capacity solar water heater ISI MARKED, complete all as directed. Make- Tata BP/ solar India Technologies Pvt Ltd or equivalent.

Material and labour for Sub Main Wiring with two run single core 6Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including stove enamelled steel conduit of 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface including taking down old, complete all as specified and directed. Note:- Two run of 6Sqmm (phase+ Neutral) + One run of 4Sqmm for earth wire shall be measured as one RM.

Taking up or down steel tubing 20 mm bore medium grade from solar water heater , complete all as specified and directed

Supply and fixing hot water pipe 20 mm bore medium grade duly insulated with glass wool and aluminum cladding ISI MARKED complete all as directed. Make-Tata/jindal/kalinga

S & F GI tubes medium grade 20 mm bore for solar water heater with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fix in repair Gun metal gate valves for solar water heater with iron wheel head , screwed both ends for iron pipes for 20 mm bore pipe confirming to IS 778 class 1 copper alloy screwed in bonnet inside screw non rising stem copper alloy body complete all as specified and directed.

Supply and fix in repair Bib tap cast copper alloy chromium plated fancy type of bore 15 mm , complete all as specified and as directed.

Material and labour for replacement of unserviceable solar collector glass made out of toughened glass ISI MARKED as per original pattern and size of capacity 500/200 ltrs complete all as specified and directed. Make- Tata BP/solar india Technologies Pvt Ltd or equivalent.

Material and labour for replacement of unserviceable temperature gauge on hot water tank as per existing pattern and size, complete all as directed Make- Tata BP/solar india Technologies Pvt Ltd or equivalent.

Supply and fix in replacement of rubber hose pipe of 25 mm bore, 300 mm long ISI MARKED complete all as specified and directed. Make- Tata BP/solar india Technologies Pvt Ltd or equivalent.

Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI strip 32 x 6 as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc including dismantling of old earthing, complete all as specified and directed . Note : The earth value/result must be less than 5 ohms.

M&L for arresting of leakages from fire fighting semi underground sump by means of pumping out complete water from tank of cap 100000 ltrs scraping of alleges from tank walls and bottom surface . Cleaning of walls completely and marking the spot of leakages/seepage inside the pump house. Repair to the partition wall of pump house and sump by cutting/chasing making v grooves and filling /repairing with PCC 1:1.5:3 mixed with water proofing compound including rendering in cement mortar 1:4 using water proofing compound as per manufacturer instruction complete all as directed.

Material and labour for pumping out water from fire fighting pump house and drying pump room completely and construction of a pit of size 2'x2'x1' deep in RCC/PCC flooring and finishing with plaster in cement mortar 1:4 in slope at side of the pump room below floor level to collect the water for pumping out side complete all as directed.

Supply , installation and testing Submersible pump set heavy duty in replacement of for pumping of thick mud water , single phase 240 volts 50 HZ of cap 1 HP complete all as directed. MAKE:Kirloskar /KSB/Jyoti/crompton

Supply and installation in replacement of ECO FIRE ABC powder type (Stored pressure )Fire Extinguisher 4 Kgs conforming to IS code -15683 operating temperature 0⁰ tto + 55 ⁰ and fire rating 2A &21B type of fire filled with MAP Powder complete in all respect and 'A, B,C class fire inflammable liquids (Petrol, Kerosene, Paints, Diesel ) gaseous fire ,LPG and acetylene and electrical fire , paper, cloth wood complete all as directed. Make ALFA FIRE/ECO FIRE INDUSTRIES/ATTASI/FIRONIL

Supply and fixing in replacement of fire bucket made of galvanized iron sheet of thickness 18 SWG capacity 09 ltrs . treated with anticorrosive treatment Design as per IS : 2546 painted with two coats of synthetic enamel paint over a coat of red oxide primer one and writing FIRE on the outer side of the buckets complete all as directed..

Supply and fixing in replacement of fire bucket stand designed as per IS : 2546 suitable for four buckets complete all as directed

Supply only fire beater complete with solid hard wood handle specification all as per IS : 8096 of 1992 complete all as directed

Taking down existing copper/aluminium conductor point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, bell/buzzers, regulators, sockets etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, ceiling, etc, complete all as specified and directed.

M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm and one single core earth continuity multi-stranded conductor size 1.5 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and including PVC casing caping with accessories on walls/ Ceiling / floor etc., including MS box 1.6 mm thick with 3mm hylem sheet cover for fixing of switches/sockets/fan regulators etc, complete all as specified for One light point controlled by one switch 5 Amp SP one -way complete all as specified and directed.

All as per item No 30 above but One fan point controlled by one switch 5 Amp SP complete all as specified and directed.

All as per item No 30 above but One 3 pin socket outlet point 5 Amp on same board complete all as specified and directed.

All as per item No 30 above but One 3 pin socket outlet point 5 Amp on independent board complete all as specified and directed.

All as per item No 30 above but but wiring with 2.5 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with 2.5 Sqmm copper conductor for earthing (green colour) complete all as specified and directed..

All as per item No 33 above but but wiring with 4.0 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with 4 Sqmm copper conductor for earthing (green colour) complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified and directed.

S & F one way switch piano flush type 230 Volt, single pole, 5 Amps, complete all as specified and directed.

S & F socket 2 pin 5 Amps, 3 pin 5 Amps flush type, 230 volt single pole, (ISI marked), complete all as specified.

S&F switch Pino flush type 15 Amps 230 volt, complete all as specified and directed.

S & F multi socket 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps 230 volt, complete all as specified and directed.

S & F fan regulator flush electronic step type complete all as specified and directed.

S&F in replacement of tube light fitting Box type made of CRCA sheet 18 to 20 Watt, including 1 x 18 To 20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified and directed.

S&F in replacement of batten holder bakelite complete with LED lamp 10 watts (Cool light) complete all as specified and directed.

S&F in replacement of LED light fitting 1x10 watt bulk head luminaries with opel diffuser 10 watt LED IP 65 ,230V 50 Hz complete all as specified and directed. .

S &F in replacement of energy saving LED Flood light 150 to 160 watt luminaries with high power LEDs lens of beam angle of 120 degree, luminaries made of pressure die cast aluminium body with built in heat sinks, enclosed with toughened glass including separate compartment for cable and incl sealed /compact driver for easy access during maintenance, suitable for operating on voltage 120 - 270 volt,AC,50 HZ, covered with inbuilt surge protection device having maximum discharge surge current( Imax) -10kA (8/20 µs) ,Nominal discharge surge current ( In)-5kA (8/20 µs) and protection level (Up) upto 10 kv , output Luminous efficacy not less then120 Lumen/Watt , CRI more then 70, conforming to IP 66, protection class 1 complete all as per Manufacturer's specifications and including necessary fixing arrangement, complete all as directed.

S&F in repair epoxy powder coated or polystyrene insulated material sheet metal enclosure factory made (double door) 4 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

S&F in repair epoxy powder coated or polystyrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

S&F in replacement of MCB Single pole 6-32 Amp, 240V, 10KA, 'C' curve complete all as specified & directed .

S&F in replacement of MCB Single pole and neutral 40-60 Amp, 240V, 10KA, 'C' curve complete all as specified & directed .

S&F in replacement of MCB triple pole and neutral 40-63 Amp, 415V, 10KA, 'C' curve complete all as specified & directed .

Material and labour for two coats of water based epoxy membrane (such as WPM 300) over a coat of primer of epoxy base (such as WPM 200) on internal wall surface of fire fighting tank after complete removal of dirt, dust, oil, grease etc including prepration of surface, complete all as directed. Make:- ENDURA/Dr. Fixit/Pedelite

Supply and fix Steel rolling shutters 1.25mm thickness gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type including demolition of unserviceable rolling shutter complete all as directed.

Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters complete all as directed.

Material and labour for applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface , complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old steel surfaces over 10cm width or girth, including preparation of steel surface , complete all as specified and directed.

Supply and fixing in repair 15mm bore tube medium grade steel water tubing with and including all GI fittings laid in trenches or fixed to wall/ceiling complete all as specified and directed.

Supply and fixing in repair 20mm bore tube medium grade steel water tubing with and including all GI fittings laid in trenches or fixed to wall/ceiling complete all as specified and directed.

Supply and fixing in repair ball brass valves , high pressure, with polythene float and fly nut for 20 mm dia bore of pipe complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore iron pipe or for union and fixed complete all as specified and directed.

M&L for Cleaning the installation area of water supply , sewage, fire fighting and pneumatic air installations by cutting and removing jungle struts, roots, bushes plants small trees and cutting of grass etc throughout the currency of contract and deposited to n.exc 50 mtr to 100 mtr out side installations complete all as specified and directed

S&F in repair rolled mild steel duct cover made out 7 mm thick of plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, handle with riveted, bolted or welded attachment conforming to Fe 410-W(Gde-E-250) quality-A complete all as specified and directed

Supplying, laying, testing, connecting and commissioning under ground LT cable size 400Sqmm, 3.5core, 1100 Volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor complete laid in trenches/fixed to pole/drawn through pipe with suitable size cable glands, crimping type cable lugs etc including taking down existing unserviceable cable, complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately.

All as per ser item No 63 above but of size 300Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 240Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 150Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 120Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 70Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 50Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 35Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 25Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 63 above but of size 10Sqmm 2 core complete all as specified and directed.

All as per ser item No 63 above but of size 16Sqmm 4 core complete all as specified and directed.

S & F in repair heat shrinkable straight through joint kit for 1100 volt grade XLPE cable of size 70 Sqmm to 150 Sqmm, 3.5 core complete all as specified and directed.

S & F in repair heat shrinkable straight through joint kit for 1100 volt grade XLPE cable of size 185 Sqmm to 300 Sqmm, 3.5 core complete all as specified and directed.

S & F in repair heat shrinkable straight through joint kit for 1100 volt grade XLPE cable of size 25 Sqmm to 50 Sqmm, 3.5 core complete all as specified and directed.

Taking down old unserviceable any type of sign board from any position and supply and fixing Informatory Glow sign board size 2.00mtr x1.50mtrx 25cm made out of 1mm thick aluminium sheet frame box type fixed on M.S angle iron frame of size 50x50x6mm thick with back support triangle type with same size of angle fixed to roof/wall with nut and bolts etc including 1mm thick acrylic sheet diffused type fixed on one side of frame and letter writing (50 to 75 words),logo/drawing etc. made with computerized added of fully retro reflective high intensity prismatic sheet pasted on board and 4Nos LED tube light fitting 20 watt complete with necessary accessories and pre-wired complete all as specified and directed. Note : (i) The letter size of Main heading shall be minimum150mmx15mm and sub heading letter size shall be minimum 100mmx10mm. (ii) The drawing and colour of writing work shall be got approved by GE.

Supply and fixing informatory sign board of size 1000mm x600mm made out of 2mm thick aluminium sheet fixed on Chromium plated Stainless steel Pipe frame of 50mm Dia, 2.25mtr long vertical member and 40mm dia 1.30mtr horizontal member ,including letter writing (100 to 150 words) , logo/drawing made with computerized printing of fully retro reflective with high intensity prismatic tape pasted on sheet with single side writing including frame embedded in 0.30x0.30x0.45mtr in PCC (1:3:6 ) type C-1 using 20mm graded stone aggregate including diamantling old, complete all as directed Note : (i)The cost of Excavation post hole, earth work , PCC for foundation etc shall be deemed to be included in the unit rate of this item. Nothing extra shall be admissible on this account. (ii) The letter size of Main heading shall be minimum100mmx10mm and sub heading letter size shall be minimum 50mmx5mm. (iii) The drawing and colour of writing work shall be got approved by GE.

S&F in repair decorative type LED 30watt Post top lantern luminaries with diffuser and painted aluminium deflector including connecting up with suitable size of copper flexible cable complete all as specified and directed.

Supply, fixing connecting and testing in replacement of Motor protection unit(MPU) three phase 415 volt , 50 HZ ,automatic phase sequence corrector automatically correct input reverse phase, single phase protection, LV, HV, LIV, Auto of loft, timer, Dry running under & over current, unbalancing ,float switch with built in CTs (Automatic-RTM ) complete all as directed

Disconnecting and taking down carefully old non functional aviation light fitting of any pattern any description and in any position complete and supply, installation, commissioning and testing on over head reservoir new LED aviation obstruction lights, comprising of die cast aluminium alloy housing, finished in aviation yellow colour, polycarbonate enclosures in red colour , with and including 302 Nos LED and accessories complete all as specified and directed. Make: Bajaj part No BGAV 302 LED/Havells/Crompton Note : Rate for any preparatory works, T&P and other resources required for dismantling /repair/ fixing of aviation obstruction light, air termination rod etc on the top of over head reservoir at the height of 20 to 25 m from Ground level is deemed to be included in the scope of above item.

Supply only heavy duty ,temper proof , industrial type pad , corrosion resistant, 10 livers padlock having double locking security rating 5 with 03 Nos keys 100 mm dia complete all as directed. Make : harrison/Godrej/Link

Supply and fixing in repair MCCB, TPN, 400 Amp, 415 volt , adjustable type thermal magnetic release breaking capacity 36 KA complete all as specified and directed

Supply and fixing in repair MCCB, TPN, 250 Amp, 415 volt , adjustable type thermal magnetic release breaking capacity 25 KA complete all as specified and directed

Supply and fixing in repair MCCB, TPN, 200 Amp, 415 volt , adjustable type thermal magnetic release breaking capacity 25 KA complete all as specified and directed

Supply and fixing in repair MCCB, TPN, 160 Amp, 415 volt , adjustable type thermal magnetic release breaking capacity 25 KA complete all as specified and directed

Supply and fixing in repair MCCB, TPN, 100 Amp, 415 volt , adjustable type thermal magnetic release breaking capacity 16 KA complete all as specified and directed

M&L for overhauling and re-alignment of unserviceable manually operated Hanger doors of size/height (width not less than 5m and height upto 12m) including replacement of defective bearing and grinding of wheels for smooth movement of doors and realignment of top and bottom rail, replacement of clamps, bolts etc including cleaning ,oiling and greasing of moveable parts and welding work for smooth functioning of hanger door, complete all as specified and directed.

Taking out unserviceable manually operated Hanger door wheel with pin and supply, fixing and testing Hanger door wheel with pin in existing size suitable for hanger door and model , complete all as specified and directed.

M&L for overhauling and realignment of unserviceable door shutters of area not exe 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc. including cleaning ,oiling and greasing of moveable parts and welding work, complete all as specified and directed.

Supply and fixing in replacement of MS framed work as in doors, Hangers, gates of angle or other section with gusset plates, rails, braces , etc, complete, drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hocks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging , also tightening and fixing complete all as specified and directed.

S&F in repair Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick, corrugated sheet having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in hanger door sheet /cladding to wall fixed with self tapping screws, complete all as specified and as directed.

Taking out Hanger Door wheel transport to civil workshop for re-facing, regrinding and re-fixing of the Hanger Door Wheel as per existing pattern complete all as directed.

Taking out unserviceable steel wire rope of any size from Hangar door and Supply fixing testing & commissioning steel wire rope multi stranded 6/19 center fiber core, 6 to 8 mm dia complete all as directed. Make :- Usha Martin/MAHADEV or equivalent

Taking out unserviceable steel wire rope of any size from Hangar door and Supply fixing testing & commissioning steel wire rope multi stranded 6/19 center fiber core, 10 to 12 mm dia complete all as directed. Make :- Usha Martin/MAHADEV or equivalent

Taking out old unserviceable ball bearing of any size and supply and fixing of Ball bearing (Hanger Door) 6308 ZZ/as per existing complete all as directed .

Construction of brick masonry valve pit 120cm X 120cm X 120cm having 230mm thick brick wall in cement mortar 1:6 and plastered with 15mm thick in cement mortar 1:6 all around including external surfaces of walls and internal walls with bottom of chamber pit duly cement based paint on all exposed surfaces of the following size with mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6 mm duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle ( including Excavation/earth work) including dismantling complete all as specified and as directed.

Supply, laying and testing in replacement of 3 core PVC Submersible cable of size 25 sq mm copper conductor of multi stranded type , complete all as specified and directed

Supplying, laying and testing in replacement of PVC insulated & PVC sheathed industrial 3 core 16 sqmm unarmored copper cable with bare bunched copper conductor for sewage pump & motor with voltage grade 1100 volts generally conforming IS : 7098 Part 1 - 1988 with up to date amendments complete with incoming and outgoing connection including 16 sqmm copper lugs complete all as specified and directed.

Supplying, laying and testing in replacement of PVC insulated & PVC sheathed industrial 4 core 6 sqmm unarmored copper cable with bare bunched copper conductor for sewage pump & motor with voltage grade 1100 volts generally conforming IS : 7098 Part 1 - 1988 with up to date amendments complete with incoming and outgoing connection including 6 sqmm copper lugs complete all as specified and directed.

Supplying, laying, Jointing and testing in trenches ductile iron pipe conforming to IS-839-2000, class K-7 in any length laid in trenches including all fitting such as run lead joint /tyton push or rubber gasket joint with spigot and socketed ends of following sizes including taking down old unserviceable complete all as specified and directed. Note:- Excavation/earth work will be measured and paid separately

150 mm Bore

100 mm Bore

80mm bore

M&L for CI/DI fitting i.e. bends any type radius/angles tapers and type straight bends increasing, decreasing or double socket etc. Tee pieces Collars Taps push on type rubber joint/lead joint/flange joint as per site requirement and plug s etc. ISI Marked not exceeding 200 mm bore complete all as specified and directed. Note : Cost of rubber joint/lead joint/ flange joint including gasket, nut bolt and washers is deemed to be included in the quoted rates.

S&F in repair CI sluice valve of 150mm bore size with stainless steel spindle and brass check nut with operative iron wheel with flanged ends class PN 1.6 conforming to IS-14846/2000, ISI marked including all jointing materials such as rubber gasket, nuts, bolts and washers etc complete all as specified and directed

S&F in repair CI sluice valve of 100mm bore size with stainless steel spindle and brass check nut with operative iron wheel with flanged ends class PN 1.6 conforming to IS-14846/2000, ISI marked including all jointing materials such as rubber gasket, nuts, bolts and washers etc complete all as specified and directed

S&F in repair CI sluice valve of 80mm bore size with stainless steel spindle and brass check nut with operative iron wheel with flanged ends class PN 1.6 conforming to IS-14846/2000, ISI marked including all jointing materials such as rubber gasket, nuts, bolts and washers etc complete all as specified and directed

S&F in repair CI Non return valve of 150mm bore size with flanged ends ISI marked including all jointing materials such as rubber gasket, nuts, bolts and washers etc complete all as specified and irected.

Supply & fixing in repair of pressure gauge 4 inch dial 0-21Kgs rating complete all as directed.

Material and labour for cutting CI/DI pipes upto 150mm bore in position and insertion of new tee before laying complete all as directed.

Supply and fixing in repair of steel water tubing galvanized iron medium grade laid in trenches including all fittings such as bends. Elbow, tees, short piece, connections , back nuts, diminishing pieces, caps plugs and unions etc for the following sizes, complete all as specified and directed . Note:- Excavation and earth work shall be measured and paid separately.

25 mm bore pipe.

40 mm bore pipe.

50 mm bore pipe.

80 mm bore pipe.

100 mm bore pipe.

Supply and fixing in replacement of gun metal globe or gate valve (class-1) with iron wheel head screwed both ends for iron pipes or unions conforming to IS-778 complete for the following sizes including necessary excavation, returning filling and removal complete all as specified and directed.

25 mm bore pipe.

40 mm bore pipe.

50 mm bore pipe.

80 mm bore pipe.

100 mm bore pipe.

Supply and fixing in repair 30W LED type solar street light fitting with following features/specification:- 1. Luminaries:- Aluminium housing LEDs for light source optics with high efficiency driver & MPPT charge controller, Excellent heat dissipation IP 65 protection, High brightness and high efficiency of more than 120 lm/W new age LEDs, individual peanut optical lenses for uniform light distribution system output: 2200 Lm. 2. Solar Panel:- Polycrystalline solar cells. 3. Battery:- Inbuilt (LiFePO4) 12.8 Volts 40 AH Lithium battery , weather proof, long back-up ideal for cloudy conditions. 4. Pole:- Galvanised pole, Rigid and safe, corrosion free length 6 mtr with optimum thermal management and heat sink design and microprocessor based charge controller and led driver maximizes the performance of panel & battery Make :Bajaj /Crompton/Halonix/Philips/Wipro/C&S

Supply and fix in repair non clogging submersible pump set of power rating single phase 7.5 KW/10HP 50 HZ with discharge not less than 20 LPS, suction lift 7 mtr , head-20 mtr suction and discharge 100 mm complete all as directed

Material and labour for desludging of sewage sump at various location by providing necessary arrangement to dispose off the sludge waste manually with rope , buckets, chain pulley and ladder/mechanical equipment /vehicle etc and buried the waste material at distance approximate 500 meter away (underground) in a pit . Cleaning of complete sump and sump room and applying two coats of white lime wash complete all as specified and as directed Note :-1. Tenderer may visit the site before quoting the rates . .2. All necessary T&P required shall be arranged by contractor. 3. Net volume of sludge removed shall be measured . 4. Contractor shall arrange necessary first aid for the worker so employed for the job to avoid any miss happening due to effluent. 5. Cost of pit for burring of sludge is deemed to be included in the quoted rates

S&F in repair power contactor 3 pole ML- 2 of L& T with DC coil of AC-3 rating 60 Amps suitable for motor including connection with suitable size copper cable and removing unserviceable cable and connection with new copper lugs, nut bolts complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole ML 4 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole ML 6 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole MNX 50 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole MNX 70 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole MNX 80 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole MNX 95 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole MNX 140 ( model as per site requirement) complete all as specified and directed.

All as per Item No 115 above but capacity 3 pole ML 1.5 ( model as per site requirement) complete all as specified and directed.

Supply and fix in replacement of over load relay for motor starter of motor 62 HP cap ( model as per site requirement) complete all as specified and directed.

Supply and fix in replacement of over load relay for motor starter of motor 15 HP cap ( model as per site requirement) complete all as specified and directed.

Taking out unserviceable DOL Starter from compressor house of any capacity & Supply, installation, testing and commissioning of 3 PH ,415 VOLT ,Relay rating 18-25 Amp ,25/18 ,HP/KW,SS enclosure grouting in wall making all in coming and outgoing connection and testing in full load complete all as specified and directed.

Supply, filling and connecting with fire hydrant ISI marked any size of AFFF (Aqueous Film Forming Foam) fire fighting chemical solution capacity 3% to 6%, packing size 200 litrs, complete all as directed. Make:- ISI marked.

M&L for boring holes under road/pavement/hard standing by trenchless technology using ultra sound technique and necessary machine for inserting CI/GI/DI pipe upto 150m bore hole, complete all as specified and directed. Note:- CI/GI pipe shall be measured and paid separately.

S & F in repair 100 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in boring hole, complete all as directed .

S & F in repair 50 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in boring hole, complete all as directed .

S & F in repair 40 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in boring hole, complete all as directed .

Note:- (i) Amount of credit of Rs. 302295.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. (ii) Contractor is advice to visit the site such as hanger door, motor, solar system etc before quoting their rates.

Electromech Engineers

KUMAR AND COMPANY

HARISH SALES CORPORATION

R D Bansal