RM 2042 25 RC 2 PH 2Cluster II One year RC PALA Kottayam RM2024 25 ZoneVI RM 2024 25 Cluster IIOne year RC PALAKottayam RM2024 25 Zone VI One year PWD Roads under Road Section Pala in Kottayam district 10 road stretches length of 26 109 km.

Amount

APPENDIX- I : TYPE A (REACTIVE MAINTENANCE)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.b:Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

OD12571/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing :- Case I, Type - A By manual means - Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.

8.4.12:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 50cmx 60 cm rectangular (Single chevron etc.)

OD12572/2024-2025:Filling up of potholes with Bituminous Ready mix compound (25 kg bag) and compacting by ramming to get a compact surface including of cost of materials laying charges transportation to site. etc complete rate is arrived for a bag of 25 kg.

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm

8.4.1:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 90 cm equilateral triangle

OD12573/2024-2025:Providing and fixing of DLP board for running contract work with Non-retro-reflectorized Vinyl sign with 1 years warranty manufactured Vinyl printed sheeting fixed over aluminum sheeting 2 mm thick/aluminum composite material sheeting 4 mm thick with area not exceeding 0.90 sqm, with suitable back supporting frame of MS angle 40 x 40 x 6 and supported on GI Pipe pole 50 mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

APPENDIX- II : TYPE B (PRE MONSOON WORKS)

OD12562/2024-2025:Engaging Mazdoor for Cutting branches of trees leaned to wards the road threatening to pedestrians and traffic and removal of fallen trees or branches on the road and clearing traffic blockage, stacking the wood at a suitable place as directed by the Engineer in charge

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

OD12563/2024-2025:Lifting the precast RCC covering slab from drain for removal of silt and placing the same slab in position after

OD12564/2024-2025:Engaging Mazdoor for Sweeping and cleaning right of way, dismantling unauthorized advertisement boards, collecting plastic and other solid debris and disposing the collected waste materials at a suitable place and in a suitable manner decided by the contractor and at the risk of contractor.

OD12565/2024-2025:Engaging Tipper 5.5 tonnes capacity for urgent loading and unloading of Slip, Debris and other land slide materials to make the road trafficable.

OD12567/2024-2025:Hydraulic Excavator 0.9 cum for urgent Slip removal, Debris flow, Land slide affected area, Clearing chalked up drain for the road trafficable.

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD12569/2024-2025:Wood cutter for cutting branches of trees in dangerous to public

APPENDIX III -TYPE C (PROACTIVE/PREVENTIVE MAINTENANACE)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.b:Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

OD12560/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing :- Case I, Type - A By manual means - Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.

OD12561/2024-2025:Engaging labour with passenger car not less than 1000 cc for conducting and reporting routine inspection up to 20 km per day for the entire length of project road at frequency of 7 days throughout the arrangement period of Running Contract as directed by the Department officers.

APPENDIX IV: TYPE D( EMERGENCY WORKS)

OD12574/2024-2025:Engaging Tipper 5.5 tonnes capacity for urgent loading and unloading of Slip, Debris and other land slide materials to make the road trafficable.

OD12575/2024-2025:Engaging Mazdoor for Cutting branches of trees and for Sweeping and cleaning right of way, dismantling unauthorized advertisement boards, collecting plastic and other solid debris and disposing the collected waste materials at a suitable place and in a suitable manner decided by the contractor and at the risk of contractor.

OD12577/2024-2025:Wood cutter for cutting branches of trees in dangerous to public

OD12578/2024-2025:Hire charges of JCB for clearing water stagnation, deposited sols from road portion etc

JEEVA SUNIL (BID ID -1984405)

BIBIN BABY (BID ID -1984346)

DAWN MATHEW (BID ID -1982400)

Bidder Name

BIBIN BABY

P.M KABEER

DAWN MATHEW

JEEVA SUNIL