PROVN OF SOAK WELLS FOR WATCH TOWERS, SPECIAL REPAIR TO P-5, ADDITION ALTERATION TO BUILDING NO. P-70 AND P-106 AND WIDENING OF ROUND ABOUT AT PORBANDAR UNDER GE NAVY PORBANDAR

Amount

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

PCC 1:2:4 type B-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded in any mortar complete all as specified.

M&L 20mm thick Granite of Ist quality, table rubbed and polished as in floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 20mm thick Granite of Ist quality, table rubbed and polished as in vertical surfaces like on pillars or wall and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including rendering 10 mm thick in cement mortar 1:3 complete all as specified and as directed.

M&L for PCC 1:4:8 type D2(using 40mm graded stone aggregate) in foundation filling mass concrete or in sub base 75mm thick complete all as specified and directed by Engr-in-charge.

M&L for sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block (coloured) any shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade complete (with grey cement and pigment) complete all as specified and directed.

M&L Non skid Ceramic coloured tiles of 8mm thick (area of each tile exceeding 0.06 Sqm but n.exc. 0.11 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layer of cement mortar (1:6) complete all as specified.

M&L Coloured glazed ceramic tiles 7mm thick of area of each tiles not exceeding 0.16 sqm, fixed on vertical surface such as risers of steps, skirting, dado , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition complete all as specified and directed.

M&L for reinforced cement concrete RCC (Design Mix) M- 30 (20mm graded crushed stone aggregate) as in slabs supported on walls, beams, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified. and the like complete all as specified and directed.

Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.

S&F Mild steel CRS bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.,complete all as specified and directed.

S&F Mild steel CRS bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed complete all as specified and directed.

Taking down cement plaster on brick or stone masonry surfaces of walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compound all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M & L for preparation of new plastered/concrete surfaces of walls, and applying two coats of oil bound distemper of approved shade/tint over one coat of primer over a coat of wall care putty to achieve smooth surfaces complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall chajjas, projections by washing, rubbing down scraping, rubbing down and stopping of painted surfaces, filling the imperfection surfaces such as holes, fine cracks are to be filled with cement and fine sand ratio (1:3) (wherever as directed by Engr-in-charge) and applying one coat of first quality weather proof acrylic paint exterior grade on external surfaces complete all as specified and directed by Engr-in-charge.

Material and labour for preparation of new plastered surfaces and applying two coat of first quality weather proof acrylic paint exterior grade on external surfaces complete all as specified and as directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars , but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge.

Cutting openings through walls for door, window and other openings or enlarging existing openings, , or cutting out defective masonry for under pinning including providing fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

M&L Powder coated aluminium anodised frame and shutter for doors, windows (Fixed/ sliding) and partitions with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing, handle, stoppage, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) or hinges type B-21 100 mm long (2 nos.), suitable handle or Star lock, (1 no.) gasket to door / window , Fixing arrangement for Stainless Steel Mesh or Plain glass section, locking arrangements complete with powder coating of approved colour minimum thickness 50 micron, including taking down old frame and shutter, complete all as specified and directed. Note: Wire mesh, glass and grill will be measured and Paid separately.

S&F aluminium anodized Deco grills 7.50 mm of Design No DG 104 with suitable size F & H sections as required to aluminium/wooden windows complete all as specified and directed.

S&F in Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 5.0mm thick Sheet glass, ordinary quality and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L 18-19mm thick pre laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging, fixed in repair, complete all as specified and as directed.

S&F continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed.

S&F150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed complete all as specified and as directed.

S&F 125 mm size Aluminium handles, cast type, anodised and fixed complete all as specified and as directed.

S&F 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Taking up or down existing Steel/ PPR water tubing, 15mm / 20mm / 25mm bore /od alongwith fittings fixed/laid in any position complete all as specified and as directed.

M&L 15mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

M&L 20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

M&L 25mm bore (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

Dismantling U/s CI Pipe/PVC along with fitting of 50/75/100/150 mm dia bore, below or above ground level ,jointed in cement mortar or solvent and taking out complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes of pressure rating 4 kgf / cm2, single socketed in any length with rubber ring laid in floors fixed to wall / ceiling with clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes of pressure rating 4 kgf / cm2, single socketed in any length with rubber ring laid in floors fixed to wall / ceiling with clamps complete all as specified and directed.

S & F 75mm(outlet) PVC (SWR) floor trap, plain including jointing with solvent cement and white cement complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation ) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing on wall on PVC frame as per specifications all as specified and directed

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat epoxy paint over a coat of primer complete all as directed & all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick, Light shade coloured (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer 20mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for 50 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

S & F 3 mm thick and 38 mm wide glass dividing strips fixed as in floor to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall by washing, scraping, rubbing down and stopping of painted surfaces and then applying one coats of oil bound distemper complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavation over areas, n. exc 1.5 m in deep and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation over areas, exc 1.5 m but not exc 3 m in deep and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft disintegrated rock complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft disintegrated rock complete all as specified and as directed.

Removing excavated materials soil/rock exc 250m and deposited at a level n.exc 500m and depositing where directed complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) in Flat complete all as specified and as directed.

M&L for precast reinforced cement concrete Design mix M-30 (20mm graded crushed stone aggregate) as in cover slab for Man hole, set in CM (1:4) incl necessary formwork complete all as specified.

M&L for concrete bed to drain pipes including packing and haunching against the sides of pipe after they are laid and tested in cement concrete PCC 1:3:6 Type C2, using 40mm graded stone aggregate, complete for 150 mm bore pipes complete all as specified and as directed.

M&L for PCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in coping of manholes, bed blocks for vent pipes, benching of manhole including necessary formwork complete all as specified and as directed.

M&L for looses filling with broken bricks of gauge 80 to 150 in soakage pits, soakage wells complete all as specified and directed.

S&F PVC(SWR) cowls 75 mm bore complete all as specified and directed.

S & F reinforced concrete pipes 150mm bore of pipe, class NP2, laid in trenches and jointed complete with collars complete all as specified and directed.

M&L 20 to 25 mm thick Kota stone slab of Ist quality, Machine cut, table rubbed and polished as in flooring laid over and including 20mm thick screed bed in cement mortar (1:4), set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing complete all as specified and directed.

M&L stone walling superior quality dressed Porbandar type block masonary in CM (1:6), brought upto courses using same size Porbandar stone complete all as specified and directed.

Rendering 10mm thick on fair faces of Porbandar stone masonary surface in CM 1:4 complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard Dense Soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil including removing of soil complete all as specified and directed.

M&L for hard core (broken stone or boulders) of gauge n. exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified & directed by Engr-in-charge.

M&L for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed by Engr-in-charge.

S&F Mild steel pipes/ rolled sections Fe 410 -W (Gde- E- 250) quality- A as in framing for cladding, rafters; purlins fixed with angle cleats or other connecting plates all as specified & directed by Engr-in-charge.

Excavation over areas n.exc 1.5 m deep and getting out in soft / disintegrated rocks complete all as specified and as directed.

Removing excavated material (soft / disintegrated rock) exc 250 m but n exc 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller Exc 8 tonne & n exc 12 tonne and forming required gradient and camber super elevation including necessary watering complete all as specified and as directed.

M&L for Soling (or sub base) 150mm thick (spread thickness) in one layer with broken boulder or quarried stone of gauge 63 to 90mm, interstices filled, surface formed & rolled with power roller 8 to 12 tonne to form a true surface and consolidated to required gradient and camber complete all as specified and as directed.

M&L for 150mm thick in two layers of 75mm mm thick each (compacted thickness) water bound macadam with coarse aggregate/ trap/ basalt of grade 63 to 40 mm rolled with 8 to 12 tonnes power roller and consolidated to required gradient, camber and super elevation as required complete all as specified and as directed.

M&L Preparing surfaces of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt mud and applying evenly a priming tack coat with bituminous primer @ 10 KG/ 10 Sq m of surface area using paving bitumen of grade VG 30 complete all as specified and as directed by Eng-in-charge.

M&L Premix bituminous macadam not exceeding 50mm consolidated thickness using hot mix plant and mechanical paver with min 4% binder (paving bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed.

M&L Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% (as per design mix) binder content by weight of total mix laid using mechanical paver, rolled and compacted to required camber and gradient complete using paving bitumen VG 30 grade and rolled with 8 to 12 tonne capacity Tendam Vibratory Roller used in static mode complete all as specified and as directed by Engineer in Charge. Note :- (1) Design mix shall also clearly specify filler (%), total quantity & Bitumen & Rolling required for 40 mm thick semi dense asphaltic concrete and BM. (2) Contractor shall be aware of local material and design mix prevailing in area. If Binder % worked out (in design mix) more then the % specified, same shall be provided without any extra cost.

M&L cleaning the road surface of all dirt, seals, oil, grease , foreign material and providing and applying 2.0 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, 20% glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, complete all as specified and as directed.

M&L for preparing the old pot holes / black top surfaces in patches by brushing with wire brushes for removing caked mud sweeping with brooms and finally fanning he cleaned surface with gunny bags to remove all loose dirt complete and applying evenly a priming / tack coat with bituminous paving bitumen @ 5 Kg per 10 Sqm all as specified and directed by Engineer-in-Charge.

M&L for Bituminous premixed carpet, 20 mm consolidated thickness as in patches with 0.27 Cum of stone chippings mixed with 14.6 kg of binder, rolled ,compacted to required camber and gradient and sealing with premixed sand seal coat as in patches with 0.06 Cum of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed by Engineer-in-charge.

S&F Convex Mirror of size 1000mm dia Mirror including custom made post and grouting the same in PCC 1:3:6 type C2 complete all as specified and as directed.

S&F Solar Delineators 1000 x 47 mm made of Polycarbonate and toughened aluminium alloy body of height 145 mm, diameter 80mm, comprising of 04 super bright LEDs which gives 360 degree viewing with solar panel - 2.5V, 120mm (approx.) 1.25V rechargeable battery, IP 65 all as specified approved & as directed.

S & F glow sign board of size 900x900x200mm (box type) made of GI 2mm thick sheet with frame (MS angle 25x25x3 mm) and marking with retro reflective high intensity sheet 400 micron thick of blue/green/white colour and pasted with heating process on 3 mm acrylic sheet , the letters shall be 100mm to 250 mm high of white colour cut to shape with special plotter and in proper manner and board shall be fixed with 75mm dia MS Pipe (Heavy duty) including painting (White/black) and embedded in ground with PCC 1:2:4 cement concrete type B-2 including excavation and earthwork complete all as specified and directed by engineer-in-charge.

Supply and fixing solar cat eye aluminium alloy shell (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystalline silicon solar panel 2.4V / 0.3 watt one NI-cad rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions complete all as specified and as directed.

S&F Framed work such as grills, gratings , with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Bharat Enterprise

Vastushilp Building Designer

SHREE CHAMUNDA ENTERPRISE

M/S Unicon Engineering co