CONSTRUCTION OF GODOWN CUM FARMERS TRAINING HALL, DHO, WEST JAINTIA HILLS DISTRICT

Amount

CIVIL WORKS BUILDING

Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches etc.

Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with Cement mortar 1 :6 (1 cement: 6 coarse sand)

65 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1 :2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 15 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centering, shuttering, finishing and reinforcement- All work up to plinth level: M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Centerlng and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Foundations, footings, bases of columns, etc. for mass concrete (using steel).

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Slabs, roofs, landings, balconies and access platform, shelves (using steel).

Centering and shuttering lncludlng strutting, propplng etc. and removal of form for all heights complete and as directed by Engineer in charge: Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Columns, Pillars, Piers, Abutments, Posts and struts (using steel).

Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level: Cement mortar 1 :4 (1 cement: 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought trained and fixed in position with hold fast lugs or with dash fasteners of required diameter & length: With 1st class Local wood (Champa/ Diengrai)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge: With lst class Local wood (Champa/ Diengrai) (i) 35mm thick shutters

Providing and fixing ISI marked, lS:1341, M.S. heavy weight butt hinges with necessary screws etc. complete: (b) 100 x 75 x 3.50 mm

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. (a) Openable

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: (a) 4.0 mm thick glass panes

15 mm cement plaster on the rough side of single or half brick wall of mix: (a) 1:4 (1 Cement: 4 Fine Sand)

Distempering with oil boilnd washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer

Painting with synthctic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats over an under coat of suitable shade with ordinary paint Of approved brand and manufacture)

Finishing walls with Acrylic smooth exterior paint of required shade, including scaffolding: New work (Two or more coat applied @ 1.67 ltr/10 sqm over sqm 151.00 and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supplying and fixing romng shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed togcther at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements tor inside and outside locking with push and pull operation complete, including the cost Of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire Of adequate strength conforming to ls:4454 - part 1 and M.S. top cover Of required thickness tor rolling shiitters: 80 x 1.20 mm M.S laths with 1.20 mm thick top cover

Providing and laying vitrified floor tiles in different sizes (thickness to be specif led by the manufacturer) with water absorption less than O.08°/o and conforming to lS:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. (b) Size of Tiles 600x600 mm

Providing ceramic Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed. (a) Normal Range

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch Of corrugation as approved by Engineer-in-charge) 0.50 mm (+O.05 a/o) total coated thickness with zinc coating 120 grams per sqm as per ls:277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns. Sheet should have protective guard film Of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 mcter or as desired by Engineer-incharge. The sheet shall be fixed using selfrdrilling/ selftapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontav vertical or ciirved surfaces, excluding the cost of purlins. rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns using self-drilling/ selftapping screws complete: (a) Ridges plain (500-600 mm)

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers, etc., including making necessary connections with rain water pipes complete. 0.80mm thick with zince coating not less than 275 gm/sqm

Providing fixing thermal insulation Of ceiling (under deck insulation) with F]esin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/Gum, 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) (c) Thermo-Mechanically Treated bars

INTERNAL WATER SUPPLY & SANITARY FITTINGS Providing and fixing chlorinated polyvjnyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall.

50 mm nominal outer diameter pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall.

20mm nominal outer diameter pipes.

32mm nominal outer diameter pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a) 15 mm nominal bore.

Providing and fixing brass stop cock of approved quality: a) 15 mm nominal bore.

Providing and fixing PTMT, push cock of approved quality and colour. a) 15 mm nominal bore, 98-80 mm long, weighing not less than 75 gms.

Providing and fixing PTMT pillar cock of approved quality and colour. a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. including painting of fittings and brackcts, cutting and making good the walls wherever require: g) White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia. C.P/ S.S Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer-in-charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. a ) 450 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. b ) Rectangular shape (453x357)mm

Providing and fixing toilet paper holder: C.P brass

CONSTRUCTION OF UNDERGROUND R.C.C. RAIN WATER HARVESTING TANK

Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. a) All kinds of soil (ordinary soil/ hard soil/ dense soil)

Providing soling with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (b) Stone soling (i) 100mm

Plain cement concrete works in foundation bed for footing, steps, walls, brick works etc. below plinth level as specified including dewatering if necessary, and curing complete (shuttering where necessary shall be paid seperately). (b) In proportion 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurements for the same is required). (b) High Yield Strength Deformed bars or TOR Bars.

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (using steel).

Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Slabs, roofs, landings, balconies and acess platform, shelves (using steel).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: (b) M20 or Prop. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size).

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (b) 20 mm cement plaster.

Cement concrete floor topping 1:1:2 (1 cement: 1 coarse sand: 2 stone aggregate) finished with a tloating coat of neat cement, including cement slurry, complete. (b) 20mm thick

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A ,including jointing with seal ring conforming to IS:5382 ,leaving 10mm gap for thermal expansion (i) Single socketed pipes b) 110 mm diameter.

Providing and fixing M.S. holder batclamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4 nos, 6 mm dia. expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ PICC surface and the cost of bolts etc, The pipes shall be fixed to the already fixed brackets with the help of 30x16 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. a. Total bracket length 580 mm of approved shape and design (for single 100 mm dia. pipe)

INTERNAL ELECTRIFICATION & FITTINGS Wiring in looping system with copper PVC cable 250/440 volt grade of size 1.5 sqmm of approved quality using PVC casing capping incluiding 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point.

(a) Long point wiring upto 10mts (i) with copper conductor

(b) Medium Point upto 6mts (i) with copper conductor

Wiring as in item No.1 to a Wall Light point

(a) Long point wiring upto 10mts (i) with copper conductor

(b) Medium Point upto 6mts (i) with copper conductor

Wiring as in item No.1 to complete to a light plug point when fixed elsewhere with continuous earth wire complete.

(a) Long point wiring upto 10mts (i) with copper conductor

(b) Medium Point upto 6mts (i) with copper conductor

Drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade in PVC casing capping complete with all accessories.

(a) With 2x2.5 Sq.mm Copper Conductor

(b) With 2x6 Sq.mm Copper Conductor

Providing , laying connection testing & commissioning of the following sizes of 1100V PCV/XLPE armoured cable with Aluminium canductor as per ISI code in bracket,trenches, M.S.cable rods and including the cost of digging of trenches, sand cushioning with laying etc and refilling the same in layers or by supporting them in walls and all other accessories as required. (c) With 3.5 core 50 sq.mm

Supplying fitting and fixing of Distribution Board ETPN DB's for MCB, Isolator, RCCB and RCBO C. IP 43 - #1k 09 with Acrylic door

(e) 18 Way + 18 Module

(f) 20 Way + 20 Module

Supplying fitting and fixing of DX3 Isolators for AC applications upto 125 A. A. Double Pole 240 V c) 63 Amp

Supplying & fixing of Load kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A A. Single Pole 240/410 V

Supplying fitting and fixing of Moulded case circuit breaker (MCCBs) of the following Capacity B. With breaking Capacity of 16 kA (iii) Four Pole (b) 80-100 Amp

Wiring to a power plug as in item No.1 above with continous earth wire complete. a) Long point wiring upto 10 mts

Supplying, fitting and fixing of LED RETROFIT LAMPS sdurface or wall mounted with all necessary accessories. (a) Regal batten for LED tube (universal batten for T5 and T8 lamps) (i) 8 upto 1X22 W

Supplying fitting and fixing of flood light surface or wall mounted with all necessary accessories b) Flood light suitable for highlighting architectural features or area lighting, also suitable to rough services/ installations. (ii) 30W

Supplying, fitting and fixing earthing with Copper earth plate 600mmx600mmx6mm thick including all acessories & providing masonry enclosure with cover plate having locking arrangement& watering pipe etc complete with charcoal salt coke as required. (a) G.I. earth plate electrode

Supplying, fixing connection testing of 8-SWG wire along the wall, columns etc with necessary clampin as required (b) With Aluminium Wire

Wiring as in item No.1 above to Ceiling/Exhaust Fan point

(a) Long point wiring upto 10mts(i) with copper conductor

(b) Medium Point upto 6mts(i) with copper conductor

Supplying, fitting & fixing of Wall/table fan with all neccesary attachments and accessories as required. (a) 400 mm Wall Fan

Suplying fitting& fixing complete 240/415V Al. Bus Chamber. A. Economy Sheet Steel 50 Hz 240/415 V (ii) TPN 4 ways b) 63 Amp Amp 415V Capacity

Supplying and fixing wall/ floor mounted metal board of welded construction and fabrication with minimum (50X5) mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/ flat iron covered with 1mm MS sheet for mounting of switch gear including painting as required. c) Iron frame board (1000X1000X200) mm

Suppling fitting and fixing complete Switch fuse unit (SFU) Sheet Steel Rewirable Main Switch with Pre-Fitted Fuse Wire 50 HZ 240/415 V B. 3 Pole with Neutral (TPN) c) 63 Amp 415 V Capacity

Supplying fitting and fixing of 3 Phase Energy Meter, 550 volt 3 x 5-10, 3 x 10-20, 3 x 20-40 Capacity (b) 3 Phase energy meter of 3 x 50, 3 x 100 Amp Capacity

Hilarious Ymbon (BID ID -4509)