Karur District - Thogamalai Block- NABARD - RIDF XXX - 2024-2025 - TN-07-38

Amount

Strengthening the road from Melamedu to Muthalaipatty Seed farm Km 0/0 - 1/255 (R4)

Clearing the light jungle including all labour charges for burring and burning etc., complete

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for cutting sidedrain etc.,complete a per SS20B

Providing and laying Gravel soling to compacted thick including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by powerr roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., cp,[;ete

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it.

Providing and laying Tack coat over WMM surface(treated with primer) using 2.5Kg of bitumen emulsion RS-1 for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,

Providing and laying Bituminious concrete to 40 mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5

Km Stone(1110x350x250) in mm

HM Stone(650x150x100) in mm

Provision for Road Marking with Hot applied Thermoplastic compound 2.50mm thick including reflectorising glass beads @250 gms per Sq.m Area. Thickness of 2.50mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORTH & H Specification No.803 with Reflectorising Glass beads on Bituminous Surface

Provision for 60 cm Equilateral triangle cautionary Sign board

Provision for Road stud with lens Reflector

Provision for Name Board

Maintenance after completion of work the road sufrace and shoulder to be maintained in proper condition to make them free from excessive edge drop offs, roughness, scouring and pot holes and cleaning of surface drain including culverts for frre flow of water. Relettering name boards and K.M & H.M stone and other maintenance operation required to keep the road traffic worthly at all the time for the maintenance period for the following years.

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

Strengthening the road from Sundalipalam to Sepalapatti Vadakkumedu (Moongil Kothu) Km 0/0 - 1/170 (R 253 )

Clearing the light jungle including all labour charges for burring and burning etc., complete

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for cutting sidedrain etc.,complete a per SS20B

Providing and laying Gravel soling to compacted thick including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by powerr roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., cp,[;ete

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it.

Providing and laying Tack coat over WMM surface(treated with primer) using 2.5Kg of bitumen emulsion RS-1 for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,

Providing and laying Bituminious concrete to 40 mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5

Km Stone(1110x350x250) in mm

HM Stone(650x150x100) in mm

Provision for Road Marking with Hot applied Thermoplastic compound 2.50mm thick including reflectorising glass beads @250 gms per Sq.m Area. Thickness of 2.50mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORTH & H Specification No.803 with Reflectorising Glass beads on Bituminous Surface

Providing and Erecting of Retro - Reflectorised coutionary, Mansatory and informatary signs (with Definition Board) made out of high intensity prismatic grade aheeting confirming to Type - IV standads of IRC - 67:2012 and ASTM D 4956 -09, specification and fixed over 2mm thick aluminim sheet fixed over a back supporting frame of 25mmx25mmx3mm mild steel angle and supported on a miled steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.6m below ground level. the sign post shuld be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 Grade Cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts loading charges neccessary for satisfactory completion of the work as directed by the Engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro - Reflection as per Table 6.6 of IRC 67-23012 the Retro - Reflective sheeting shall be covered under 7 years warranty issued for filed performace and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (as per MORTH & H specification No.801)

Provision for 60 cm Equilateral triangle cautionary Sign board

Provision for Road stud with lens Reflector

Provision for Name Board

Maintenance after completion of work the road sufrace and shoulder to be maintained in proper condition to make them free from excessive edge drop offs, roughness, scouring and pot holes and cleaning of surface drain including culverts for frre flow of water. Relettering name boards and K.M & H.M stone and other maintenance operation required to keep the road traffic worthly at all the time for the maintenance period for the following years.

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Sri Navaladiyar And Co (BID ID -1229605)