Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.0 Cr
EMD Value
₹1.0 L
Closing Date
10 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Carrying out of balance work in B-23 Quarter at Nabinagar TPP (4 X 250 MW) at risk and cost of previous agency
NBCC/SBG/etender/2024/98~EWe659ded729fe440d522f20ec
NBCC/SBG/etender/2024/98
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹1.0 L
10 Apr 2024
11 Mar 2024
10 Apr 2024
11 Mar 2024
10 Apr 2024
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over
2.6 areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal
of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly
2.6.1 All kinds of soils Cum. 25.00 151.10 3777.58
Excavating trenches of required width for pipes, cables, etc. including excavation for
sockets, and dressing of sides, ramming of bottoms depth upto 1.5 m including getting
2.1 out the excavated soil, and then returning the soil as required in layers not exceeding
20 cm in depth including consolidating each deposited layer by ramming, watering etc.
and disposing of surplus excavated soil as directed, within a lead of 50 m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia Meter 120.00 202.28 24273.62
Supplying and filling in plinth with Jamuna sand under floors, including watering,
ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level.
4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cum 15.00 2944.67 44170.00
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry
brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine
sand, including finishing the top smooth.
REINFORCED CEMENT CONCRETE WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of forms for:
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 25.00 190.77 4769.31
Centring and shuttering; Suspended floors, roofs, landings, balconies and access
5.9.4 Shelves (cast in situ) Sqm 70.00 390.04 27302.96
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 470.00 322.55 151598.91
5.9.6 Columns, pillars, piers, abutments, posts and struts. Sqm 350.00 440.25 154086.86
5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 10.00 384.22 3842.16
5.9.9 Arches, domes, vaults upto 6m span Sqm 30.00 1035.48 31064.52
Vertical and horizontal fins individually or forming box louvers band, facias and eaves
Extra for shuttering in circular work (20% of respective centering and shuttering
5.9.19 Weather shade, Chajjas, corbels etc. including edges. Sqm 15.00 478.12 7171.82
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Extra for additional height in centering, shuttering where ever required with adequate
bracing, propping etc., including cost of de-shuttering and decentering at all levels,
over a height of 3.5 m, for every additional height of 1 Meter or part thereof (Plan
area to be measured).
5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) Sqm 25.00 154.45 3861.34
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars Kilogram 10.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars Kilogram 15000.00 10.85 162707.81
Providing and laying in position machine batched and machine mixed design mix M-25
grade cement concrete for reinforced cement concrete work, using cement content as
per approved design mix, including pumping of concrete to site of laying but excluding
the cost of centering, shuttering, finishing and reinforcement, including admixtures in
recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,
improve workability without impairing strength and durability as per direction of
Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/recoverable separately).
5.33.1 All works upto plinth level Cum 5.00 3722.32 18611.62
5.33.2 All works above plinth level upto floor V level. Cum 100.00 4419.96 441996.17
Brick work with common burnt clay FPS(non modular) brick of class designation 7.5 in
foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 10.00 4089.07 40890.69
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 115.00 4816.33 553877.47
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand). Sqm 388.00 569.44 220944.01
Brick edging 7cm wide 11.4cm. deep to plinth protection with common burnt clay
F.P.S. (non modular)
bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement :
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1)
non decorative type, core of block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering with vertical grains or cross bands
and face veneers on both faces of shutters.
9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 140.00 1854.36 259610.96
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average
width of aperture
1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory
windows with hinges and necessary screws :
9.27.1 35 MM THICK SHUTTERS
9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size
9.27.1.1.1 Second class teak wood Sqm 90.00 2974.53 267707.51
Providing and fixing M.S. grills of required pattern in frames of windows etc.
9.48 with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete.
9.48.1 Fixed steel window by welding kg 3200.00 105.85 338719.68
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors,
(weighting not less than 450 gms)
Providing and fixing aluminium sliding door bolts ISI, marked anodised (anodic coating
9.96 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with nuts and screws etc. complete:
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not
less than grade AC
10 as per IS: 1868) transparent or dyed to required colour or shade with necessary
screws etc. complete
Providing and fixing aluminium pull bolt lock, ISI marked, anodized (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed of
required colour and shade, with necessary screws bolts, nut and washers etc.
Providing and fixing aluminium handles ISI marked anodised (anodic coating
9.1 not less than grade AC 10 as per IS:1868) transparent or dyed to required
colour or shade with necessary screws etc. complete
providing and fixing Aluminium hanging floor door stopper, ISI marked, anodised
9.101 (Anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to
required color and shade with necessary screws etc. complete
9.101.2 Twin rubber Stopper Each 120.00 81.52 9782.86
STRUCTURAL STEEL WORK
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured
from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock
jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or
base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar
guards, lock strikeplate and shock absorbers as specified and applying a coat of
approved steel primer after pre-treatment of the surface as directed by Engineerin-
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb. Meter 241.20 366.78 88468.41
10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 244.20 389.36 95082.33
Steel work welded in built up sections / framed work, including cutting, hoisting,
10.25 fixing in position and applying a priming coat of approved steel primer using structural
steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works Kg 1200.00 87.50 104995.33
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
10.26 balcony railing, staircase railing and similar works, including applying a priming coat of
approved steel primer.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
11.3 aggregate) finished with a floating coat of neat cement including cement slurry, but
excluding the cost of nosing of steps
11.3.1 40 mm thick with 20 mm nominal size stone aggregate. Sqm 125.00 219.93 27490.63
Cement plaster skirting up to 30 cm height, with cement mortar 1:3
11.6 (1cement : 3 coarse sand), finished with a floating coat of neat cement.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with
grey cement slurry mixed with pigment to match the shade of the slab, including
rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12
mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to match the shade of the slabs, including
rubbing and polishing complete.
11.31 Extra for prefinished nosing in treads of steps of kota stone/sand stone slab. Meter 60.00 73.61 4416.56
Extra for Kota stone / sand stone in treads of steps and risers using single length upto
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-in-
Charge, in skirting, risers of steps and dados, over 12
mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Providing and laying Ceramic glazed floor tiles of size 300x300mm
(thickness to be specified by the manufacturer) of 1st quality conforming to
IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red
Brown, laid on 20mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand)
including pointing the joints with white cement and matching pigment etc.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer)
with water absorptions less than 0.08% and conforming to IS:15622 of approved
make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and matching pigments
Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622,
11.46 of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete.
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm
impregnated with a coat of coarse sand at 60 cudm per 10sqm, including cleaning the
slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil
12.15.1 With residual type petroleum bitumen of grade VG - 10 Sqm 250.00 137.80 34449.77
Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
12.21 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3
(1 cement : 3 fine sand) as per standard design.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1
m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making and finishing the
outlet complete.
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming
Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for
thermal expansion (i) Single socketed pipes
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for
unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A, including
jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal
12.42.1 Coupler
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
12.42.2 Single Pushfit Coupler
12.42.4 Single tee without door
12.42.6 Shoe (Plain)
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised -
PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S.
12.43 screws of required length, including cutting brick work and fixing in cement mortar 1:4
(1 cement : 4 coarse sand) and making
good the wall etc. complete
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams.
13.1 12mm cement plaster of mix:
13.2 15 mm cement plaster on rough side of single or half brick wall of mix:
13.7 12mm cement plaster finished with a floating coat of neat cement of mix:
13.16 6 mm cement plaster of mix:
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface
13.43.1 Water thinnable Cement Primer Sqm 3600.00 34.81 125330.17
13.5 Applying priming coat
With ready mixed pink or Grey primer of approved brand and manufacture on wood
work (hard and soft wood).
Wall painting with acrylic emulsion paint of approved brand and manufacture to give
13.60.1 Two or more coats on new work Sqm 3600.00 78.17 281424.78
Painting with synthetic enamel paint of approved brand and manufacture to give an
13.61.1 Two or more coats on new work Sqm 750.00 72.25 54187.38
SANITARY INSTALLATION
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm
sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including
17.1 flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,
with all fittings and fixtures complete, including cutting
and making good the walls and floors wherever required:
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
17.2 flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls and
floors wherever required
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32
17.7 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require
White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P.
brass pillar taps
Providing and fixing stainless steel A I.S.I. 304 (18/8) kitchen sink as per IS:13983
17.1 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever required:
17.10.1 Kitchen sink with drain board
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings
17.28.2 Flexible pipe
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Each 12.00 771.00 9252.06
brass screws and washers complete
Providing and fixing 600 x 120x 5 mm glass shelf with edges round off supported on
17.33 anodised aluminium angle frame with C.P. brass brackets and guard rail complete Each 12.00 528.08 6337.01
fixed with 40 mm long screws, rawl plugs etc. complete.
17.34 Providing and fixing toilet paper holder:
17.34.1 C.P.brass Each
17.35 Providing and fixing soil, waste and vent pipes:
17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. Meter 200.76 891.23 178922.74
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989 Meter 65.00 768.43 49948.04
Providing and fixing bend of required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete:
17.38.1.2 Sand cast iron S&S as per IS:3989. Each 12.00 374.55 4494.64
17.38.2.2 Sand cast iron S&S as per IS:3989. Each 12.00 309.30 3711.54
17.39 Providing and fixing plain bend of required degree
17.39.1.2 Sand cast iron S&S as per IS:3989. Each 24.00 326.05 7825.12
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
17.39.2.2 Sand cast iron S&S as per IS:3989. Each 12.00 241.61 2899.32
Providing and fixing single equal plain junction of required degree with access door,
insertion rubber washer 3mm thick bolts and nuts complete
17.43.1.2 Sand cast iron S&S as per IS:3989. Each 12.00 605.77 7269.27
17.43.2.2 Sand cast iron S&S as per IS:3989. Each 12.00 459.28 5511.38
17.44 Providing and fixing single equal plain junction of required degree
17.44.1.2 Sand cast iron S&S as per IS:3989. Each 36.00 559.55 20143.72
17.44.2.2 Sand cast iron S&S as per IS:3989. Each 12.00 393.88 4726.54
17.48 Providing and fixing single unequal plain junction of required degree:
17.48.1.2 Sand cast iron S&S as per IS:3989. Each 12.00 444.47 5333.67
17.56 Providing and fixing terminal guard
17.56.1.2 Sand cast iron S&S as per IS:3989. Each 12.00 421.94 5063.32
17.56.2.2 Sand cast iron S&S as per IS:3989. Each 4.00 360.04 1440.14
17.57 Providing and fixing collar
17.57.1.2 Sand cast iron S&S as per IS:3989. Each 40.00 309.15 12365.99
17.57.2.2 Sand cast iron S&S as per IS:3989. Each 52.00 213.40 11096.76
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and
fittings of diameter.
Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast
(spun) iron pipes of diameter.
Providing and fixing trap of self cleansing design with screwed down or hinged grating
17.6 with or without vent arm complete, including cost of cutting and making good the
walls and floors:
17.60.1 100 mm inlet and 100 mm outlet
17.60.1.1 Sand cast iron S&S as per IS:3989 Each 12.00 936.03 11232.40
17.60.2 100 mm inlet and 75 mm outlet
17.60.2.1 Sand cast iron S&S as per IS:3989 Each 36.00 973.28 35037.91
Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement concrete
17.61 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ),
including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including
cutting and making good the walls etc.
18.10.1 15mm dia nominal bore Meter 25.20 208.52 5254.81
18.10.2 20mm dia nominal bore Meter 102.20 241.66 24697.47
18.10.3 25mm dia nominal bore Meter 316.84 294.86 93421.89
18.10.4 32mm dia nominal bore Meter 28.60 332.74 9516.30
18.10.5 40mm dia nominal bore Meter 36.40 412.77 15024.68
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good
18.11 the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint,
cutting chases and making good the wall
18.11.1 15 mm dia nominal bore Meter 103.20 290.83 30013.14
18.11.2 20 mm dia nominal bore Meter 93.60 317.82 29748.10
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed
18.17.3 40 mm nominal bore Each 2.00 568.58 1137.16
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions:
18.21.2 45 cm length
18.22 Providing and fixing C.P. shower rose with 15 to 20 mm inlet:
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar
1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm
(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2
coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary
18.32 excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone
aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1
cement :3 coarse sand)
12mm thick, finished with a floating coat of neat cement complete as per standard
Painting GI pipes and fittings with synthetic enamel white paint with two coatsover a
ready mixed priming coat, both of approved quality for new work:
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe
and making long screws etc. complete (new work)
18.46.1 15mm nominal bore Each 6.00 160.47 962.85
18.46.3 25mm nominal bore Each 48.00 194.32 9327.22
18.46.5 40mm nominal bore Each 2.00 307.11 614.22
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
ISI:12701 marked with cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings and the base support for
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS
standards and weighing not less than 810 gms.
Providing and fixing CP brass stop cock (consealed) of standard design and of
approved make conforming to IS:8931
18.52.1 15mm nominal bore Each 12.00 601.84 7222.07
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931.a) 15 mm nominal bore
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of
19.1 cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of
joints etc. complete :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
19.2 stone aggregate 40 mm nominal size) all round S.W. pipes including bed concrete as
per standard design.
19.2.1 100mm diameter S.W. pipe Meter 23.20 436.02 10115.75
19.2.2 150mm diameter S.W. pipe Meter 73.30 533.21 39084.41
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm
size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less
than 2.70 kg as per standard design :
19.4.2 150 x 100 mm size P type
19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6.00 1359.82 8158.93
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse
sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone
aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design.
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455
19.7.1 x 610mm internal dimensions, total weight of cover and frame to be not less than 38
kg (weight of cover 23 kg and weight of frame 15 kg).
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6.00 6144.70 36868.22
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Making connection of drain or sewer line with existing manhole including breaking into
and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2
19.21 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on
both sides with cement mortar 1:3 (1 cement :3 coarse sand), finished with a floating
coat of neat cement and making necessary channels for the drain etc. complete.
19.21.1 For pipes 100 to 250 mm diameter Each 2.00 313.47 626.94
WATERPROOFING WORKS
Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of (i) Ist course of applying
cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS
2645 in recommended proportions including rounding off junction of vertical and
22.3 horizontal surface (ii) IInd course of 20 mm cement plaster 1:3 (1cement: 3 coarse
sand) mixed with water proofing compound in recommended proportion including
rounding off junction of vertical and horizontal surface (iii) IIIrd course of applying
blown or residual bitumen applied
hot at 1.7 Kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should
be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.
22.14 Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
Extra items already approved
13.8 providing and applying white putty Sqm 3600.00 96.41 347068.47
13.47.1 Finishing Wall with premium Sqm 2510.00 102.11 256304.15
9.118.1 24mm THICK PVC DOOR SHUTTER Sqm 37.80 2924.06 110529.57
TOTAL OF CIVIL WORKS, (DSR ITEMS) SECTION-A A 7885398.23
NON-SCHEDULE ITEMS
Providing, hoisting and fixing precast reinforced cement concrete drain covers including
finishing and plastering the exposed surface with cement mortar 1:3 (1 cement : 3 fine sand)
5 of thickness not exceeding 6mm to give a smooth and even surface including centring and Cum 5900.38 0.29 1687.51
shuttering etc. but excluding the cost of reinforcement with 1:1½:3 (1 cement : 1½coarse
sand : 3 graded stone aggregate 20mm nominal size) including making holes and providing
lifting hooks complete as per drawing.
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Providing and fixing 25 mm thick mirror polished machine cut Kota Stones for kitchen /
pantry platforms, vanity counters, facias and similar locations of required size and approved
shade,colour & texture with bull nosing, laid over 20mm thick base cement mortar 1:4 (1
cement : 4 coarse sand) , with joints treated with white cement, mixed with matching
10 pigment, epoxy touch ups , including rubbing, curing, polishing etc. complete at all levels. Sqm 1187.14 15.00 17807.11
(Area of slabs 0.1 sqm to 2.0 sqm) The item shall also include fixing of Kota stone in facia and
drops of width upto 150mm with epoxy resin based (Araldite or equivalent) adhesive including
cleaning and providing opening of required size and shape for wash basin / kitchen sink and
similar location including necessary holes for pillar taps etc. wherever required
Providing and fixing heavy duty 25mm dia,2mm thick anodised aluminium drapery rods of
14 approved color and shade with decorative end covers, matching brackets, etc. Meter 488.17 200.00 97634.39
complete.Manufacturer and Sample to be approved by EIC.
Providing and fixing wardrobes shutters out of 18 mm thick both side commercial veneered
particle board conforming to IS: 3097, sealed from all sides with Teak wood leaping 18x18 to
shape at meeting joint and 18x6 on remaining sides with 18mm wide designer teak wood
molding as per drawing to be fixed to 50x25 second class teak wood frame with nickel plated
bright finished MS piano hinge IS 3818 marked, with necessary screws. The frame shall be
provided with 19x6mm teak wood beading from all around of inner side to obtain 6x6mm
19 grooved and 25x6mm TW beading on outside. The frame shall be fixed to wall with hold fast Sqm 2711.98 88.00 238654.35
on either side, centre to centre distance not more than 600mm, making holes and grouting the
same with PCC (1:2:4 – 1 cement : 2 coarse sand : 4 graded stone aggregate
12mm nominal size) including cutting to shape and making rebate. The work shall include all
necessary hardware, fixtures, two coats of synthetic enamel paint over required primer
including all inner wall side of opening. The work shall be done as per drawing complete to the
satisfaction of Engineer-in-Charge.
Providing and fixing shelves in wardrobes and showcases with necessary supporting
arrangement out of 18 mm thick veneered partial board grade 1 conforming to IS: 3097, with
21 commercial veneering on both sides and exposed edges shall be sealed with 18x6mm thick sqm 1255.21 80.00 100416.40
leaping and shall be fixed on
25x50mm hardwood batons on three sides including applying minimum two or more coats of
white synthetic enamel paint over wood primer to give even shade
26 Extra for providing built in multi purpose six levers drawer lock of approved quality. No 366.48 36.00 13193.40
Providing & fixing 20mm dia 2.0mm thick anodised aluminium hanger rod with coupling to cup
Providing and fixing flash butt welded factory made steel glazed window and ventilators of
standard rolled steel sections as per IS:1038, steel of ST-32-0 grade, conforming to IS:1977.
joints mitred and flash butt welded with 15x3mm lugs 10cm. Long with steel lugs embedded
36 in concrete blocks
15x10x10cm. of 1:2:4 (1cement : 2 coarse sand : 4 stone aggregate of 20 nominal size) or
rawl plugs or fixing clips or with bolts or nut as required complete as per drawing
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Windows/Ventilators- side/top hung: to have double frame flush butt welded together with
45x3mm. M.S. flat and double shutter. The outer shutter shall be glazed with glass panes
4mm. thick with snap type M.S. beading of approved shape and section, concealed, fixed with
zinc plated M.S. screws. The inner shutter shall be fixed with wire mesh of IS guage
a designation 140G with wire of dia. 0.71mm. with Sqm 7421.29 102.60 761424.55
15mmx3mm M.S. flats. Each shutter leaf shall have priming coat of approved steel primer
including the cost of metal beading, hinges, pivot, handles 100mm, tower bolts 100x10mm
etc. as required. Friction hinges for glazed shutter and heavy duty box type hinges for wire
mesh shutters shall be provided.
Windows fixed type – with glass panes 4mm. thick fixed with snap type M.S. beading of
approved shape and section, with concealed zinc plated M.S. screws to the outer rebate of the
frame formed by flash but welding including applying priming coat of approved steel primer,
including cost of metal beading etc.
Providing and fixing 50 mm diameter and GI rain water spout 50 cm long in cement mortar
1:4 (1 Cement : 4 Coarse sand)
Providing and fixing 24 gauge 8 mm size galvanised chicken wire mesh of approved width at
67 junctions of concrete and brick work and other locations called for including necessary laps Sqm 179.31 80.00 14345.09
and U shape galvanised wire nails complete.
SANITARY FITTINGS
Providing and fixing stainless steel jali grating with or without hole for waste pipe for
floor/nahani trap in place of C.I. grating.- 100 mm dia.
Providing and fixing C.P. brass towel rail with two C.P. brass brackets of 600 x 20 mm
size,fixed to wooden cleats with C.P. brass screws complete.
Providing and Fixing C.P. brass 150 mm dia towel ring fixed to wall/door with wooden cleats
85 and C.P. brass screws including cutting and making good the wall wherever required. Each 366.48 12.00 4397.80
Constructing brick masonry open surface drain with bricks of class designation 75 in cement
mortar 1:4 (1 cement : 4 fine sand) including earth excavation 10 cm thick bed concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and 25 mm
105 thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm
nominal size) for filling haunches including 12 mm cement plaster 1:4 ( 1 cement : 4 coarse
sand) with a floating coat of neat cement inside the drain, its top and exposed side including
disposal of surplus earth complete as per standard design.
b 15 cm drain 20 cm average depth-With FPS bricks Meter 628.25 112.42 70628.22
TOTAL VALUE OF (NDSR ITEMS): Civil Works B 1357401.39
SCHEDULE-II:INTERNAL ELECTRIFICATION SECTION-A: NON DSR ITEMS
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Wiring for primary* Light point / Ceiling fan point / Bracket Fan / Exhaust fan point
with 1.5 sq. mm. PVC insulated copper conductor wire in recessed medium class PVC
conduit, including supply and erection of conduit, wires, accessories, modular switch
board & modular switch, earthing with
1.0sq.mm, PVC insulated copper wire, complete as required. (The switchboard will be
individual depending upon layout / requirement).
The Rate shall also include wiring for each circuit of Lighting Panel to respective switch
boards with 2.5 sq. mm PVC insulated copper wire in recessed medium class PVC
conduit and earthing with 1.0 sq.mm PVC insulated copper wire of all switch
Wiring for secondary* light point with 1.5 sq.mm. PVC insulated copper conductor
wires in recessed medium class PVC conduit, including supply and erection of conduit,
wires, accessories, switch board and switch, earthing with 1.0 sq.mm, PVC insulated
copper wire, complete as required.
Wiring for 5 pin 5/6 A, plug point with 1.5 sq.mm. PVC insulated copper conductor
wires including providing 5 pin 5/6A modular socket outlet with modular switch
including switch board, earthing the 5th pin with 1.0sq.mm,PVC insulated copper wire
etc. complete as required. (on Separate switch board)
Wiring for 5 pin 5/6 A, plug point with 1.5 sq.mm. PVC insulated copper conductor
wires including providing 5 pin 5/6A modular socket outlet with modular switch on
4 existing switch board, earthing the Points 271.91 72.00 19577.38
5th pin with 1.0sq.mm,PVC insulated copper wire etc. complete as required. (on same
Wiring for primary 5/15 A power plug point with 4 sq. mm. PVC insulated, copper
5 conductor, wires in recessed PVC conduit along with 1 No. 1.5 sq.mm PVC insulated Points 1478.01 84.00 124153.19
copper wire for loop earthing as required including conduit wire and accessories.
Wiring for secondary circuit 5/15A power plug point for flats, with 2.5 sq. mm PVC
insulated copper conductor single core wires in recessed PVC conduit along with 1 No.
1.5 sq.mm PVC insulated copper wire for loop earthing as required, including conduit,
wire and accessories.
Supply & Erection of metal boxes in recess with suitable size with modular plate and
7 covered in front including providing and fixing of 6 pins 5/15A modular socket Nos 599.17 108.00 64710.22
outlet and 15A modular switch, connections painting etc. as required
Wiring for primary 20 A power plug point with 4 sq. mm. PVC insulated, copper
8 conductor, wires in recessed PVC conduit along with 1 No. 1.5 sq.mm PVC insulated Points 1438.20 24.00 34516.78
copper wire for loop earthing as required including conduit wire and accessories.
Supply, installation, testing and commissioning of 20A, 240 volts SPN industrial type
socket outlet with
2 pole and earth metal enclosed plug top along with 20A SP MCB "C" curve in sheet
steel enclosure in recessed with chain metal cover for socket outlet as required.
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Wiring for two-way light points with 1.5 sq.mm PVC insulated copper conductor in
recessed PVC conduit complete including supply and erection of conduit, wires,
10 accessories, modular switch boards & modular switchs, earthing with 1.5sq.mm, PVC Points 1249.81 12.00 14997.67
insulated copper conductor, complete as required. (The switchboard will be common /
individual depending upon layout/requirement
Wiring for call bell with bell push button, point with 1.5 sq.mm PVC insulated copper
11 conductor wires in recessed PVC conduit, including earthing with 1.5 sq.mm PVC Points 840.00 12.00 10080.02
insulated copper conductor wire with modular switch as required.
Wiring for sub-main with 4x6 sq.mm PVC insulated copper conductor cable in recessed
14 PVC conduit complete as required including earthing with 2 Nos. of 2.24 mm dia Mtrs 454.47 200.00 90894.96
copper wire including conduit wire and accessories.
METER BOARD:- (Supply, Erection, Testing & Commissioning) TPN meter board
complete as required with following:
1 No. of 100 A / 440 Volts TPN SFU
Meter cubicles (without meters)** - 07 Nos. With space for meter & CT. OUTGOING:
32 Amp TPN MCB - 07 Nos.
3 Nos. indication lamps.
LIGHTING PANELS: Supply, Erection, Testing & Commissioning of following:MCB type
TPN, lighting panels suitable for installation in recess comprising the following:
Incomer:1) 32 Amp. 415 Volts TPN, MCB Isolators including Residual current circuit
19(h) breaker (RCCB) with current sensitivity of 30mA -01 No. no 14856.86 13.00 193139.17
Aluminium Busbars: 32A, 415V, TPN -1set
Outgoings:1) 25 Amp. SP MCB - 01 Nos. 2)16Amp. SP MCB - 06 Nos.
3) 6Amp. SP MCB - 09 Nos.
TELEPHONE & T.V. ANTENNA: Supply and fixing of PVC conduit of following sizes
20(a) alongwith accessories, pull boxes etc. in recess complete as required including cutting
the wall and making good the same :
b 32 mm dia Mtrs 70.89
Supply and erection of MS box of suitable size for Telephone and TV Antenna points,
recess mounted with modular type as required. i.e. 75 mm x 75 mm.
Supply and erection of MS sheet steel 1.6 mm thick, painted metal box in recess with
3 mm thick white bakelite laminated sheet cover complete as required for Telephone
and TV Antenna points and all other fixing accessories required.200 x 150 x 100 mm
Supply and erection of jack type RJ11 socket for telephone points including connection
etc. on existing metal box as required.
24 Supply and erection of T.V. Antenna socket on existing metal box as required. NO 111.68 24.00 2680.24
EARTHING & LIGHTING PROTECTION:
Supply, Installation, testing and commissioning of call bell / buzzer on wall, including
58 connections, complete as required, including providing all accessories required for NO 200.05 12.00 2400.56
Digitally signed by PRIYA
Balanced Rate at which
Item No. in Unit of Estimated Cost
Quantity to be original tender
the DSR- Description of Item Measurem put to tender
executed at Risk was awarded
2014 ent (ECPT)
Supply and fixing of Ceiling fan with 1200mm sweep, double ball bearing motor,
capacitor, three MS blades die cast Al housing in stove enameled white with electronic
stepped type regulator, suspension rod & hook / hexagonal fan box and all accessories
and of reputed make including connections as required.
Supply and fixing of 200/225 mm sweep Exhaust fan suitable for single phase, 230V,
AC supply complete with motor, capacitor louvers, mounting brackets, all accessories
and of reputed make. Installation in the existing opening including making the hole
to suit the size of the above fan connections as required.
Supply and fixing of 300 mm sweep Exhaust fan suitable for single phase, 230V, AC
supply complete with motor, capacitor louvers, mounting brackets, all accessories and
of reputed make. Installation in the existing opening including making the hole to suit
the size of the above fan connections as required.
NOTE: * In case of more than one light point controlled by the same switch, the wiring
terminal block of the first light point including the switch shall be considered as a
primary point, loop wiring from light to light shall be considered as secondary point.
Extra/Substituted Item in Electrical
SI/37 Supply and fixing of 20 watt 4 feet long light fixture make: bajaj: BCLSB 20 WH, Phillips
slimline 20 watt, Crompton-LDL-20-CDL watt or approved make including connections as NO 66.00
SI/42 Supply and fixing of 18 watt circular led surface light fixture make: bajaj: BGSLO Sleek
Surface 18W WH RD, Phillips Astra Surface 18 watt, Crompton-LCDSPLN-R-18-CDL or NO 48.00
approved make, including connections as required.
SI/47 Supply and fixing of 9-10 watt 2 feet long LED Light fixture, Make BAJAJ: BCLSB 10 WH,
Phillips-Astra Line 9 watt, Crompton-LDL-10-CDL or approved make, including connections as NO 36.00
SI/53 Supply and fixing 9-10 watt Bulkhead LED light fixture Make Bajaj: BIBWP 10W LED, Phillips-
Endura LED Bulkhead, Crompton-LBHE-10-CDL or approved make, including connections as NO 16.00
Digitally signed by PRIYA
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
1 NIT.pdf
Tender Document
3 SCC.pdf
Tender Document
4 Contractor GCC-2013.pdf
Tender Document
5 TENDER DRAWINGS.pdf
Tender Document
6 PART A_SCOPE AND SPECIAL TECHNICAL REQUIREMENT.pdf
Tender Document
7 PART B_GENERAL TECHNICAL SPECIFICATION.pdf
Tender Document
8 PART C SAMPLING TESTING QUALITY ASSURANCE.pdf
Tender Document
9 LIST OF APPROVED MAKE.pdf
Tender Document
10 Milestone.pdf
Tender Document
2 BOQ.pdf
Tender Document
addendum-c89488c25c91-Corri 2 98.pdf
pdf • 0.12 MB
corrigendum-2419-Corri 2 98.pdf
pdf • 0.12 MB
corrigendum-2367-Corri-1 98.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .