Tender ID

Karnataka

AOC

Works

Buildings

Construction of CT & PT Lab in ground floor of circle office building complex, Tumkur.

Bangalore Electricity Supply Company Limited

BESCOM Chitradurga Area Zone(CTAZ) Office Chitradurga | Chitradurga, Karnataka

Amount: ₹9.3 LCloses: 22 Sept 2026Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published9 Sept 2026
Closed22 Sept 2026
Awarded—

Bids

1 Bid22 Sept 2026

#	Company	Amount	Status
1	UMESH R ₹8.3 Laccepted-aoc	₹8.3 L	accepted-aoc

Tender Value

₹9.3 L

EMD Value

₹23,280

Closing Date

22 Sept 2026, 5:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Bangalore Electricity Supply Company Limited

Contact Person

EE CIVIL

Mobile Number

Work Description

Construction of CT & PT Lab in ground floor of circle office building complex, Tumkur.

Tender Information

Tender ID

BESCOM/2026-27/BD/WORK_INDENT1178

Reference Number

BESCOM/2026-27/BD/WORK_INDENT1178

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

BESCOM Chitradurga Area Zone(CTAZ) Office Chitradurga

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAnnual Turnover Certificate issued by CA

RequiredGST Registration Certificate

RequiredPWD license

RequiredBankers Certificate

RequiredBalance sheets and PL statements issued by CA

RequiredTender capacity in letter head with sign and date

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The rates quoted shall include provision for payment of EPF, ESI and Employees welfare cess as per prevailing GOK Act.

The Contractor should quote the item wise rates excluding GST.

The contractor shall quote item wise rates in the tender and the same shall holds good till the works are completed. The rates should include provision for payment of all Taxes, Royalty or any other such taxes due to the Corporation/Government notified by the Government time to time.

The rates quoted should be inclusive of all leads and lifts for materials etc. The Bidder should visit the work spot at his own cost before quoting his rates.

The contractor shall obtain the necessary licence, permission and approved plan on construction of building from the concerned competent authority and local authority if required. Any such charges should be paid by the successful bidder and the same amount will be reimbursed by the BESCOM at later stage.

Bidders shall produce the original documents uploaded in the KPPP Portal without fail on demand from the BESCOM, the original documents not matching with the uploaded documents shall be liable to rejection.

No materials will be supplied departmentally. The Bidder has to make his own arrangement for procurement of required materials, arranging Electricity, Water supply etc. to complete the work.

The rates/prices quoted by the Bidder shall be firm and no price variation will be admitted.

Quantities given in the notification and schedule are approximate and are liable to vary.

The Bids shall remain valid for a period of 90 days from the date of opening of Bid.

Conditional Bid is liable for rejection without assigning any reasons.

The successful Bidder shall bind himself to abide by the rules and specifications in force and shall execute the necessary agreement on stamp paper within seven days from the date of intimation of acceptance of his Bid, failing which, his Bid will be cancelled unconditionally and his EMD will be forfeited. In addition they would also be responsible for making good the extra expenditure that would be incurred in inviting fresh Bids for the work.

The EMD of the successful bidder will be discharged when the bidder has signed the Agreement and furnished the required Performance Security.

Within 20 days of the receipt of the letter of Intent, the successful bidder shall deliver to the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga a security deposit for an amount equivalent to 5% of the contract price in the form of BG/FDR in favour of the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga payable at Chitradurga)

Within 20 days of the receipt of the letter of Intent, the bidder shall deliver to the Chief Engineer (Ele.), O&M Zone, BESCOM, Chitradurga an additional security for unbalanced tenders (If the bidder quoted his lesser rates compared to the amount put to tender) in accordance with Clause 25.5 of ITT & Clause 44 of the conditions of contract for all works in the form of BG/FDR in favour of the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga payable at Chitradurga).

The work should not be sub-let.

The E.M.D. furnished by the unsuccessful bidders will be refunded within 30 days of the end of the tender validity period.

If the work is not completed and handed over within the agreement period, a penalty of 1 percent or such smaller amount as the Chief Engineer(Ele.)or the other competent authorities (whose decision in writing shall be final) may decide for every day that the work remains un-commenced or unfinished after the agreement period, provided always that the total amount of penalty to be paid under the provision of this clause shall not exceed 7.5% of the total cost of the work as shown in the tender.

The Bidder has to pay compensation to the disabled or deceased workmen under him for any injury or death caused during the execution of works, failing which the necessary amount will be deducted from the bills and paid to the injured or deceased.

The Bidder shall submit a PERT CHART indicating date wise programme chalked out to commence all the construction activities against time schedule given and it should be got approved by the Competent authority before commencement of work. It is required for periodical review of progress of work.

Time is the essence of contract and the extension to the stipulated period of completion will not be accorded except under unavoidable circumstances. The Bidder has to arrange sufficient men, machinery and materials so that the work can be completed within the stipulated time.

BESCOM reserves the right to reject or accept any of the tenders without assigning any reasons.

For more details, refer attached NIT.

Technical Criteria

General

Department Registration Details

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Financial Status

The annual turnover of the bidder shall not be less than the amount put to tender i.e., Rs.9.31 lakhs per year in any TWO of the previous 5 financial years (i.e., 2021-22 to 2025-26).Turnover certificate issued by Chartered accountant shall be uploaded

Audited CA Certificate of Annual Turnover

In support of this, the balance sheets and profit loss statements issued by a Chartered Accountant for the any TWO of the previous 5 financial years shall be scanned and uploaded. (i.e. 2021-22 to 2025-26) (Registered Chartered Accountant PIN must be mentioned) For the certificates, UDIN is mandatory.

Others -- Balance sheets and PL statements

Others

The bidder shall be a Registered KPWD Civil contractor of Class-III and above. The valid License in original shall be scanned and uploaded.

PWD Registration Certificate (Class I/II/III/IV)

The bidder shall possess valid GST registration number. The original GST Certificate shall be scanned and uploaded.

GST Registration

The credit facility certificate after this notification date (Bankers certificate as per uploaded format) issued by any Nationalized Bank/Scheduled Indian Bank addressed to the Chief Engineer(Ele), CTAZ, BESCOM, Opp. RTO Office, Turuvanur Road, Chitradurga 577 501 shall be scanned and uploaded in original

Line of Credit

Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder shall upload his tender capacity calculation in his letter head along with date and signature with Seal.

Others -- bid capacity calculation sheet with date and sign in letter head

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹23,280

Important Dates

Last Activity

22 Sept 2026

Published

9 Sept 2026

Bid Opening

24 Sept 2026

Download Ends

21 Sept 2026

BOQ Preview

•

Construction of CT & PT Lab in ground floor of circle office building complex, Tumkur.

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

•

Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

•

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...

•

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

•

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Powder coated minimum thickness 50 m...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

do 6A Three Way socket

•

do Stepped Fan Regulator Two Module

•

do 6/16A Universal Socket

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63 A

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...

•

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bea...

•

Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

•

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

•

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries

•

Supply, installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR duct able split Air- Conditioner.

•

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

•

Supplying of .feet PVC Batten with integrated LED tube rs & 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any m...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

Providing and fixing Naming board for office with ACP back drop of (3mm thickness), with acrylic letters of 3mm thick, M S frame work for back drop, including LED lighting with warrantty of 1years, ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

BC.docx

Others - Bankers certificate • 0.01 MB

NIT 26-27.docx

Tender Submission Guidelines • 0.06 MB

kw-1 CT PT lab tender document.docx

Tender Document • 0.21 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

UMESH R

₹8.3 Laccepted-aoc