REPAIR AND MAINT OF E M INSTALLATION STAND BY DG SETS PUMP MOTOR FENCING AND OTHER CONNECTED WORKS AT PALAMPUR MIL STN

Amount

Servicing of Diesel Engine Generating sets of different rating as is to be carried out as per schedule given as under). :- B-Check :- (i) Change lubricating oil (ii) Change lubricating oil filters (iii) Change fuel filters (iv) Change coolent (v) Check engine wiring for damage (vi) Drain fuel supply tank (vii) Change by pass lubricant filters (viii) Change air filters (ix) (x) Check oil pressure (xi) Change fuel water separator C- Check :- (i) Adjust valves (ii) Steam clean engine (iii) Replace hoses as reqd (iv) Check turbo charger mounting nuts (v) Check engine oil heater (vi) Clean radiator (vii) Inspect following parts & replace as required (Alternator, starter etc) (viii) Clean fuel tank from inside (ix) Change Engine oil Note : (i) Maintenance of Diesel Engine Generating Set as per maintenance schedule chart . (ii) Schedule of service, Diesel Gen set M/C No wise is attached in PS. (III) Servicing of DG set will be done by Authorised dealer of Kirloskar/Cummins only. (iv) B-Check and C-Check spare parts will be measured and paid separately under supply only and fixing charges included with the servicing of DG set items i.e Item No 1 (1.1 to 1.08).

Description all as per item No. 1 here-in-above but for DG set 7.5 KVA

Description all as per item No. 1 here-in-above but for DG set 40 KVA

Description all as per item No. 1 here-in-above but for DG set 62.5 KVA

Description all as per item No. 1 here-in-above but for DG set 75 KVA

Description all as per item No. 1 here-in-above but for DG set 82.5 KVA

Description all as per item No. 1 here-in-above but for DG set 160 KVA

Description all as per item No. 1 here-in-above but for DG set 140 KVA

Description all as per item No. 1 here-in-above but for DG set 250 KVA

Supply only new Fuel oil filter elements with 'O' ring for 7.5 KVA DG Set complete all as specified and as directed. Make: Kirloskar/Fleetguard/Cummins

Description all as per item No. 2 here-in-above but for DG set 40 KVA

Description all as per item No. 2 here-in-above but for DG set 62.5 KVA

Description all as per item No. 2 here-in-above but for DG set 75 KVA

Description all as per item No. 2 here-in-above but for DG set 82.5 KVA

Description all as per item No. 2 here-in-above but for DG set 160 KVA

Description all as per item No. 2 here-in-above but for DG set 140 KVA

Description all as per item No. 2 here-in-above but for DG set 250 KVA

Supply only new Lubricant oil filter cartridge element with 'O' ring for 7.5KVA DG Set complete all as specified and as directed. Make : Kirloskar/Cummins/Fleetguard/Asoka /Mahindra

Description all as per item No. 3 here-in-above but for DG set 40 KVA

Description all as per item No. 3 here-in-above but for DG set 62.5 KVA

Description all as per item No. 3 here-in-above but for DG set 75 KVA

Description all as per item No. 3 here-in-above but for DG set 82.5 KVA

Description all as per item No. 3 here-in-above but for DG set 160 KVA

Description all as per item No. 3 here-in-above but for DG set 140 KVA

Description all as per item No. 3 here-in-above but for DG set 250 KVA

Supply only new By pass Lubricant Oil filter cartridge element with 'O' ring for 7.5 KVA DG Set complete all as specified and as directed. Make : Cummins/Fleetguard

Description all as per item No. 4 here-in-above but for DG set 40 KVA

Description all as per item No. 4 here-in-above but for DG set 62.5 KVA

Description all as per item No. 4 here-in-above but for DG set 75 KVA

Description all as per item No. 4 here-in-above but for DG set 82.5 KVA

Description all as per item No. 4 here-in-above but for DG set 160 KVA

Description all as per item No. 4 here-in-above but for DG set 140 KVA

Description all as per item No. 4 here-in-above but for DG set 250 KVA

Supply only new air filter (both outer & inner) element with 'O' ring for7.5 KVA DG Set complete all as specified and as directed. Make : Kirloskar/Cummins/Fleetguard

Description all as per item No. 5 here-in-above but for DG set 40 KVA

Description all as per item No. 5 here-in-above but for DG set 62.5 KVA

Description all as per item No. 5 here-in-above but for DG set 75 KVA

Description all as per item No. 5 here-in-above but for DG set 82.5 KVA

Description all as per item No. 5 here-in-above but for DG set 160 KVA

Description all as per item No. 5 here-in-above but for DG set 140 KVA

Description all as per item No. 5 here-in-above but for DG set 250 KVA

Supply only of fuel water separator filter complete with benjo bolt and washer for 7.5 KVA capacity DG Sets complete all as specified and as directed. Make : Cummins/Fleetguard

Description all as per item No. 6 here-in-above but for DG set 40 KVA

Description all as per item No. 6 here-in-above but for DG set 62.5 KVA

Description all as per item No. 6 here-in-above but for DG set 75 KVA

Description all as per item No. 6 here-in-above but for DG set 82.5 KVA

Description all as per item No. 6 here-in-above but for DG set 160 KVA

Description all as per item No. 6 here-in-above but for DG set 140 KVA

Description all as per item No. 6 here-in-above but for DG set 250 KVA

Supply only of Engine oil 15W40 grade in DG Set complete all as specified and as directed. Make : K OIL SUPER BY KIRLOSKAR/ Castrol/Servo.

Supply only of Coolent of DG Set complete all as specified and as directed. Make-K COOL BY KIRLOSKAR/Castrol/BOSCH

Supply only V-Belt off sizes, complete all as per site requirement complete all as specified and as directed.

Supply only of Oil pressure gauge ISI mark complete all as specified and as directed.

Supply only of oil temperature gauge ISI mark complete all as specified and as directed.

Supply only of Fuel gauge meter ISI mark operated on 24V DC complete all as specified and as directed.

Supply only of high temprature diesel Hose pipe of 1000 PSI of size 12.5mm dia for connecting from diesel tank outlet to Engine complete with banjo bolt & washer.

Supply only of high temprature diesel Hose pipe of 1250 PSI of size 10.3mm dia for connecting from engine to diesel tank complete with banjo bolt & washer.

Supply only of distilled water for battery complete all as directed.

Dismantling /taking down complete radiator assy from DG set form diffrent capacity and transport to workshop for cleaning of the same with suitable cleaning reagent to remove rust & scaling , plugging of any water leakage by brazing and refixing including replacement of rubber hose pipe complete with jupiter clamps for any capacity of DG Sets, complete all as specified and as directed.

M&L dismantling of Exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust pipe and refixing including replacement of worn out rubber gasket packing and nut,bolts including replacement of asbestos rope 20mm complete all as specified and as directed.

Dismantling defective dynamo from engine, supplying and fixing new dynamo 24 Volt DC. Make- TVS Lucas,inclding replacement of worn out nuts bolts mounting clamp etc. complete all as specified and as directed.

Dismantling of self starter 24V DC by disconnecting battery connection , taking out to civil workshop for carrying out following repair work and refixing including testing complete:- (i) Rewinding of armature & Field coil.(ii) Replacement of Carbon brush and solenoid switch (iii) Replacement of gear assembly .

Supplying and replacement of Digital meter square type 96x96mm suitable for measuring 3-ph combined voltage, ammpere & frequency simultaneously in three independent windows with ultra LED display complete. Make Neptune/AE

Supply and fixing 440Volt DC 24 V relay suitable for 140KVA/250 KVA DG Set complete all as specified.

Supply and fixing 220Volt AC 24 V relay suitable for 62.5 KVA/100 KVA DG Set complete all as specified.

Supplying and replacement self starter 12 Volts DC suitable for DG Set 63/82.5/100 KVA Make -LUCAS/BOSCH

Supplying and replacement self starter 24 Volts DC suitable for DG Set 160/200/250 KVA Make -LUCAS/BOSCH

M&L for spray painting to Panels, Enclosure of DG sets, fire stand post duct plates etc at DG installations with two coats of synthetic enamel paint of approved colour after making the suface free from oil/grease/rust and applying a coat of red oxide primer complete all as specified and as directed.

Supply and fixing Battery 12V, 180 AH with 25 Nos Electro plates including battery lead positive & negative battery terminal complete duly charged complete all as specified and directed. Make Exide (Brand : Exide Express) or equivalent in Amron/Prestolite make.

Supply and fixing Battery 12V, 150 AH with 25 Nos Electro plates including battery lead positive & negative battery terminal complete duly charged complete all as specified and directed. Make Exide (Brand : Exide Express) or equivalent in Amron/Prestolite make.

M & L door joint and handle locks arrangement for any size/capacity DG set complete all as specified and directed.

Opening the coupling of DG set of capacity 160KVA /250 KVA the outer cover and taking out the fly wheel ring and shifting to workshop for repair in and including replacement of fly wheel ring by prressing machine and reinstalled the same after repair to make it fully functional complete all as specified. Make - Kirloskar

Opening the coupling of DG set of capacity 82.5KVA /62.5 KVA the outer cover and taking out the fly wheel ring and shifting to workshop for repair in and including replacement of fly wheel ring by prressing machine and reinstalled the same after repair to make it fully functional complete all as specified. Make - Kirloskar

Supply and replacement of compact type panel mounted battery charger suitale for charging 02 Bty, 12 V 180 AH Each complete all as speified and directed with 2m copper leads -02 Nos & brass clamps.

Supply and replacement of compact type battery charger unit suitale for charging 01 Bty ,12 V 180 AH complete all as speified and directed with 2m copper leads -02 Nos & brass clamps.

Taking out FIP from DG set , of cap 63 /250KVA transportation to authorised service centre for repair /maintenance and refixing to DG set including replacement of necessary spare parts such as Plunzers, governer kit with pin , Nozzels , Head ball guide kit, Head sheet , Rock rod, Rollar bearing , oil seal, piston & rings pin, jain kit and sleeves complete all as directed and specified.

M&L cleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.

Supply of Battery Terminal Copper (Positive & Negitive) complete all as specified and directed.

S&F in repairs battery lead (Red colour), PVC insulated multistranded , copper conductor 70sqmm, each 1.25 mtr long, duly fixed with brass clamps, copper lugs complete all as specified

S&F in repairs battery lead (Black colour), PVC insulated multistranded , copper conductor 70sqmm, each 1.25 mtr long, duly fixed with brass clamps, copper lugs complete all as specified.

M&L for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to GI strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of galvanized iron or steel after welding of GI strip to earth electrode to the full lenght of earth plate, 40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering pipe med grade with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge.

Taking out unserviceable asbestos rope from the exhaust pipe cleaning the exhaust pipe supply and wraping new asbestos rope of suitable size and wrapping with wire mesh and plasterig withplaster of paris /white cement for smooth finishing including replacement of gasket and tightening of all nut and bolts all as directed by the Engineer-in -Charge

S&F HDPE dwc pipe for DG Set cable of 50 to 95 Sqmm for protection all as specified and directed

Supply & Fixing in replacement water pump assembly complete all as specified and directed.

Supply & Fixing in replacement Lubrication oil pump assembly complete all as specified and directed.

Supply & Fixing in replacement Lubrication oil pipe complete all as specified and directed.

S&F in replacement lever for stopping of engine as per site requirement for DG set complete all as specified and directed.

Supply and fixing in repairs automatic voltage regulator up to 82.5 KVA as per sample complete all as specified and directed.

S&F in repairs automatic voltage regulator suitable for 100 KVA to 250 KVA as per sample complete all as specified and directed.

S&F in repairs automatic voltage regulator suitable for 250 KVA as per sample complete all as specified and directed.

S&F in replacement MCCB 125 Amp 16 KA, 3 pole, adjustable type all as specified and directed.

S&F in replacement MCCB 160 Amp 36KA,3 pole, adjustable type all as specified and directed.

S&F in replacement MCCB 200 Amp 36KA, 3 pole, adjustable type all as specified and directed.

S&F in replacement MCCB 250 Amp 36 KA, 4 pole, adjustable type all as specified and directed.

S&F in replacement MCCB 400 Amp 36KA, 4 pole, adjustable type all as specified and directe

S&F of On-load type Changeover switch 250 Amp, 4-pole, 415 volt, open execution type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of On-load type Changeover switch 200 Amp, 4-pole, 415 volt, open execution type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of Off-load type Changeover switch 63Amp, 4-pole, 415 volt, with enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of Off-load type Changeover switch 100 Amp, 4-pole, 415 volt, with enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of Off-load type Changeover switch 125 Amp, 4-pole, 415 volt, with enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of Off-load type Changeover switch 200 Amp, 4-pole, 415 volt, with enclosure complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

S&F of Off-load type Changeover switch 250 Amp, 4-pole, 415 volt, with enclosure complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider

Excavation in trenches in any type of soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables, erection of poles,struts, stays etc and getting out all as specified and as directed by Engr-In-Charge.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts hane been erected and tested complete all as specified.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

M&L sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed by Engr-in-Charge.

M&L for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

Supply & laying of UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 95 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.

All as per item No. 66 above but of cross section area 70 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 66 above but of cross section area 50 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 66 above but of cross section area 35 Sqmm 3.5 core complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L for Machine pressed precasted concrete paver block 80mm thick M40 grade concrete with grey cement and pigment over sand cushioning all as per specified and directed by Engr-in-charge.

M&L PCC 1:4:8 type D2 as in lean concrete in mass concrete, paving, base etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:4, complete all as specified and directed.

M&L rendering 15mm thick PCC on fair faces of brick or concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete for encasing of fencing posts complete all as specified and directeq

S&F 3.15 mm dia chain link fencing including line wires , size of mesh 50x50 mm to any type of standards , rails straining bolts , etc including provision of binding wire complete as specified and directed.

S&F rolled section joist , chaneel angle or tee sections, fixed independently without connection plated etc ( cut of ordinary lengths i.e within 20 mm of the length indicated conforming to FE 410 Gde E-250 quality A complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagaonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long dia of shank diameter of neck in 5 to 10mm complete all as specified and directed.

S&F mild steel round bars 10mm dia and over cut to length , bent to shape required including cranking, bending spirally for hooping for coloumns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips conforming to FE 410 Gde E-250 quality A complete all as specified and directed.

S&F power contactor 3-pole, 150Amp, 440V rating MCX41 type all as per Cat Part No LC1D150M7. Make : Schneider or equivalent in L& T ,C&S/Havells make.

S&F coil suitable for MCX41 power contactor complete all as specified and directed. Make : L&T or equivalent in C&S/Havells make.

Supply and spread graded stone aggregate of 40mm to 63 mm nominal size around outdoor transformer and two/four pole structure /panel complete all as specified and directed.

M & L GI Pipe medium grade 100mm bore for cable protection in floor/road crossing/along pole complete all as specified and as directed.

M & L GI Pipe medium grade 80mm bore for cable protection in floor/road crossing/along pole complete all as specified and as directed.

M&L removal green vegetation and dressing around the plinth/PCC hardstanding up to 1.5 mtr of sub stations and 2/4 pole structure etc including disposal of vegitation /material up to 50 mtr distance from the site and levelling/surfacing the ground all as specified and as directed.

Supply and fix MS Chequred plate 6.0 mm thick sheet having with Hook, and painting it with one coat of black paint suitable for cable duct cover in pump house and sub stn complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 70 to 95 sq mm complete all as specified and as directed. Make : Denson/M-seal

S&F MCCB enclosure for frame 1 optium 3 pole MCCB complete all as specified and directed.

S&F bus bar chamber TPN suitable for 63A TPN Copper bus bar with four outgoining ways complete allas spoecified and directed.

S&F bus bar chamber TPN suitable for 100A TPN Copper bus bar with four outgoining ways complete allas spoecified and directed.

S&F DG Set control panel display suitable for 40 to 63.5 KVA DG set complete all as specified and directed.

M/s Sheetal Associates (BID ID -3163634)