PROVN OF MODULAR KITCHEN IN TYPE V MARRIED ACCN AT CGDHQ-01 PORBANDAR, RIGID GUARD RAIL WITH NETS ON BOTH SIDES AT CG JETTY PBR AND REPLACEMENT OF CONVENTIONAL LIGHT TO LED LIGHT IN MD ACCN AT CGDHQ-15 OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Providing and fixing of kitchen cabinet in building no P-98 as per drawing with platform (h-32” w 24” l length 132") big size drawers and door below platform and above platform ((h-84” w 12” l length84")cabinets plywood - water proof green or equivilent with both side 1mm thick laminate in side white laminate and outside as per user requirment

Providing and fixing of kitchen cabinet in building no P-47 as per drawing with platform (h-32” w 24” l length 132") big size drawers and door below platform and above platform ((h-84” w 12” l length 84") cabinets plywood - water proof green or equivilant with both side 1mm thick laminate in side white laminate and outside as per user requirment

Providing and fixing of kitchen cabinet in building no P-48 as per drawing with platform (h-32” w 24” l length 132") big size drawers and door below platform and above platform ((h-84” w 12” l length 84") cabinets plywood - water proof green or eqvilant with both side 1mm thick laminate in side white laminate and outside as per user requirment

Providing and fixing of kitchen cabinet in building no P-49 as per drawing with platform (h-32” w 24” l length 132") big size drawers and door below platform and above platform ((h-84” w 12” l length 84") cabinets plywood - water proof green or eqvilant with both side 1mm thick laminate in side white laminate and outside as per user requirment

Providing and fixing of kitchen cabinet in building no P-50 as per drawing with platform (h-32” w 24” l length 132") big size drawers and door below platform and above platform ((h-84” w 12” l length 84") cabinets plywood - water proof green or eqvilant with both side 1mm thick laminate in side white laminate and outside as per user requirment

M&L for 100mm thick broken stone or boulders Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L Moorum / Red bajri filling in floors or pavings laid in layers n.exc 15cm thick, spread, levelled and rammed including watering all as directed by Engr-in-Charge.

M&L PCC,, 1:2:4, type B0(using 12.5 mm graded stone aggregates) as in coping, bed blocks for hold fasts and similar works complete all as specified and directed.

M&L Pre-cast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in cover slabs set in cement Mortar 1:4 and finished all exposed surfaces of concrete even and fair without using extra cement incuding neceesary form work. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in Columns,pillars,piers, posts and struts Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L Porbandar stone masonary, block in course, well bonded and bedded, built in CM 1:6 all as specified and as directed by engineer-in-charge.

Form Work to sides of pillars/ columns square or rectangular ,for rough finished surfaces of flat concrete.

M&L PVC coated 4mm dia galvanised steel wire mesh of aperture 100 x 100mm made up into mattresses or cages, lapped, wired and laid in position, incl closing after filling complete all as specified and as directed by Engr-in-Charge.

M&L Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

M&L Mild steel CRS TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

S & F 1.25mm thick Galvanised rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; eerected in position as indicated, complete; but gear operated type with chain wheel and hand chain etc competed al as specified and directed by Engineer in Charge.

S & F 0.63mm thik Plain, galvanised, mild steel sheeting, in duct cover complete all as specified and directed by Engr-in-Charge

M&L for 50mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base of floors all as specified

M & L 15mm thick Rendering on brick ,concrete surfaces in cement mortar 1:4 finishing even and smooth without using extra cement and similar likes etc complete all as specified & directed by Eng-in-Charge.

M&L Preparing of newly plastered surfaces and applying two coats of cement based paint (of approved tint) over a coat of primer complete all as specified

Demolition of stone masonry built in cement mortar of any description all as specified and as directed by EIC.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Dismantling of mild steel work as in angle iron frames/grills mild steel bars etc complete all as specified and as directed..

M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of epoxy paint over a coat of red oxide primer complete all as specified and as directed.

S&F Galvanised angle Iron steel work as in posts/struts in fencing including cutting, tops to shape as directed, drilling holes notching for wire etc, including nut bolting, anchore fastener and necessary fittings and fixtures complete complete all as specified.

S&F Galvanised Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices,angle brackets, cleats and other connections complete complete all as specified.

Suppiy and fix in replacement surface mounted LED batten fiting 20 Watt. Sleek and seamless profiled extruded aluminium batten with an effcient diffuser with driver and clamp of suitable size with SS Screw complete all as specified and directed including connecting cable from ceilling rose to terminal block of luminaire all as specified Make : Wipro (LL20-281-xxx-65AL1) / Philips (BN021C LED20S PUS CW GR S2) or equivalent in GE

supply and fix in replacement LED High Bay light fittings surface mounted 135W to 150W, 20000lm, CCT 5700/6500K, fixed output Wide beam innovative thermal sink design, flat with slight inclination and thermal fins in the middle with hook mounting arrangement with suitable SS nut and washer complete and Suitable for 10 to 30 meter height all as specified . Make : Wipro (LH21-222-060-57-xx) /Philips(BY515P LED200-5700 NB PSU GR) or equivalent in GE

Suppiy and fix in repair surface mounted slim round downlighter fiting 10 Watt, with driver complete all as specified and directed including connecting cable from ceilling rose to terminal block of luminaire all as specified. Make : Wipro (LL20-111-xxx-65NE3) / Philips (BN 021 LED 10s-6500 PUS GR S1) or equivalent in GE

vijay infraprojects pvt ltd

KRISHNA ENGINEERING

shivshakticonstruction

Gatral Construction Co.

SHREE CHAMUNDA ENTERPRISE

Nitesh Enterprise

roxy enterprise