SPECIAL REPAIR TO BOUNDARY WALL AND FOOTPATH AT TYPE IV V QUARTERS IN SAGAR RESIDENTIAL AREA AT NPOL KOCHI

Amount

Demolition of cement concrete (un reinforced) in ground floors not exceeding 15 cm below or above ground level complete all as specified and directed.

Demolition of brick work built in cement mortar of any description incl quions arches but excluding ashlars facing complete all as specified and directed.

M&L for PCC (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in as in Foundation base etc complete all as specified.

M&L Precast cement concrete block masonry with solid blocks in 1:2:4 exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M & L for PCC (1:2:4) Type B-0 using 12.5mm graded stone aggregate as in benching, kerbs and levelling course over boundary wall etc complete all as specified and as directed

Taking down plaster on brick or concrete surfaces including raking out joints for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces finished fair and even in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed. (Note: Water proofing compound shall be measured and paid separately)

Supply on integral water proofing compound complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into apikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work or water tanks and similar work conforming to Fe 290 grade E 165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed

M&L for preparation of new plastered surface and applying Two coat of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed all as specified & directed by Engineer-in-charge.

M&L for complete removal of existing treatment from walls and applying Two coat of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed all as specified & directed by Engineer-in-charge.

Surface dressing n.exc 15cm deep in soft/loose soil complete all as specified and directed.

M&L cement concrete Type D-2 1:4:8 (40mm graded aggregate) as in floors and pavings of 100 thick all as specified and as directed

Supply and laying fine aggregate 50mm thick spreading and levelling in layers n exc 25cm thick incl consolidation complete all as specified and directed. Note: punned thickness shall be measured for payment

M&L Machine presses precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

M&L for cement concrete 1:2:4 Type B 1 (using 20 mm graded aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, hold fast including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of stone slabs laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Granite (of any type) work (table rubbed and polished) in cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite, 25 mm thick complete all as specified and directed by Engineer-in-charge.

M&L for Rounding to edges of stone slabs one edges, such as in steps, platform, and other similar situations complete all as specified and directed by Engineer-in-charge.

ZOOM ENTERPRISES