Construction Work of Common Plot Development, Gutter Slab Work, Cement Concrete Patch Work, Decorative Post Top LED Street Lighting System, Obstructive D.I. Water Supply Pipe Line, RCC Storm Water Drainage Pipe Line, RCC Under Ground Drainage Pipe Line Utility Shifting in the Portion of Railway Over Bridge Work, Pumping Machinery, Mini Hydraulic Garbage Tipper and Tractor With 5000 Ltr. Tanker as per various location Chart At. Amreli, Dist. Amreli Under District Mineral Foundation Grant Year-2025-26, Grant Received from the GUDC Department, 15th Finance Commission Grant Year-2024-25 (Tide) 1st Instalment, Self Fund Or Gruda Infrastructure Development Fund, SJMMSSY (Road Resurfacing) Year-2026-27 and Jamin Mehsul Binkheti Local Fund Cess Grant, Rashtriy Parv 15th August-2026 and 15Percentage Vivekadhin Grant Year-2026-27.

NAME OF WORK: CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT, GUTTER SLAB WORK,

CEMENT CONCRETE PATCH WORK, DECORATIVE POST TOP LED STREET LIGHTING SYSTEM,

ADDITIONAL STREET LIGHTING WORKS, OBSTRUCTIVE D.I. WATER SUPPLY PIPE LINE, RCC STORM

WATER DRAINAGE PIPE LINE, RCC UNDER GROUND DRAINAGE PIPE LINE UTILITY SHIFTING IN THE

PORTION OF RAILWAY OVER BRIDGE WORK, PUMPING MACHINERY, MINI HYDRAULIC GARBAGE

TIPPER AND TRACTOR WITH 5000 Ltr. TANKER AS PER VARIOUS LOCATION CHART AT, AMRELI

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

11 Schedule - "B"- 11

12 Schedule - "B"- 12

13 Schedule - "B"- 13

14 Schedule - "B"- 14

15 Schedule - "B"- 15

16 Schedule - "B"- 16

17 Schedule - "B"- 17

18 Schedule - "B"- 18

19 Schedule - "B"- 19

20 Schedule - "B"- 20

21 Schedule - "B"- 21

22 Schedule - "B"- 22

23 Schedule - "B"- 23

24 Schedule - "B"- 24

25 Schedule - "B"- 25

26 Schedule - "B"- 26

27 Schedule - "B"- 27

28 Schedule - "B"- 28

29 Schedule - "B"- 29

30 Schedule - "B"- 30

31 Schedule - "B"- 31

32 Schedule - "B"- 32

33 Schedule - "B"- 33

34 Schedule - "B"- 34

35 Schedule - "B"- 35

36 Schedule - "B"- 36

37 Schedule - "B"- 37

38 Schedule - "B"- 38

39 Schedule - "B"- 39

40 Schedule - "B"- 40

41 Schedule - "B"- 41

42 Schedule - "B"- 42

43 Schedule - "B"- 43

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 10,82,88,868=00 Put to Tender Rs. 10,82,88,868=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : Hamirshihji Circle To Shyam Circle, At. Amreli

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and erecting Street Light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class

G.I. sleeve tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having sufficient fasteners for

fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with

vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [B]

Double Arm Bracket 2 Mtr 123.00 2975.00 No

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 123.00 3000.00 No

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 6 Sq. mm 3210.00 141.00 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for

laying of cable. below ground/ road surface for enclosing cable (A)

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 3210.00 174.00 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 1300.00 81.00 Rmt

roviding 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. 123.00 3600.00 No

POLE SHIFTING & REMOVE OLD FOUNDATION 123.00 3225.00 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 123.00 900.00 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 123.00 210.00 No

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs. 13.00 2250.00 No

Providing and erecting Street Light pole base plate & j- olt (200mm X

200mm X 12mm base plate, 4-M20 Bolts and 600mm long )with

necessary G.I. J Bolts 123.00 1500.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF LED STREET LIGHTING

LOCATION : At Sardar Circle To Baps Temple Road, At. Amreli

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mm X 200mm X 12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts. Approx Pole weight 59 kg. 27.00 14316.75 No

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms. length and suitable for

mm /80mm / required size of pole top having sufficient fasteners for

fixing the brackets and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays, reducer and with check

nuts complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A]

Double Arm decorative Bracket (POWDER COATED) 1.5 Mtr 27.00 4295.03 No

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, THD <

10%,CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85% as per approved vender list

make (fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and,

Light must have 440VAC line supply with over-voltage protection.(ii)

60 Watts dom type white, Cat-lll 54.00 3408.75 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 54.00 306.79 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 378.00 190.69 Rmt

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(B) 4 core 4 Sq. mm 412.00 126.13 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II ) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable.below ground / road surface for enclosing cable

(A) 50mm dia. 352.00 69.54 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc.hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 12635.10 No

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V + 5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V, having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III 1.00 2811.54 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 30 to

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T, BCH,T.C., Siemens, C&S make). (a) for 25 / 32 A rating 1.00 3931.43 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 352.00 545.40 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity: 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

Agency. [A] For electrical installation up to 440 V Length of Pipe

Mtr Back filling compound - 1 Nos. of Bag of 15 Kgs.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : From Rajkamal Chowk To Collage Circle, At. Amreli

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mm X 200mm X12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kg 5.00 14316.75 No

Providing and erecting DECORATIVE bracket comprising main B Class

MS pipe. complete with suitable B Class M.S. sleeve tubing of approx.

45cms. length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread

of 1.coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] SINGAL Arm Bracket 1.Mtr 2.00 1838.00 No

[B] Double Arm Bracket 1.Mtr 54.00 3539.65 No

[C] TRIPAL Arm Bracket 1.Mtr 14.00 5241.29 No

[D] FOUR Arm Bracket 1 Mtr 1.00 6942.94 No

Providing and erecting Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired up to terminal block.IP 65 (ii)32-40W. (ii) above

Watts, Cat-lll (WARM WHITE) 156.00 9026.37 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/ 1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 156.00 306.79 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 400.00 119.99 Rmt

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables (B) 4 core 6 Sq. mm 350.00 204.53 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50mm dia. 400.00 69.54 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 2.00 12271.50 No

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V+5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed 2.00 5181.30 No

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. 40AMP FP ICS=100% of ICU only Cat III 2.00 2811.54 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 30 to

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T,BCH,T.C.,Siemens, C&S make) (a) for 25/32 A rating 2.00 4022.33 No

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 400.00 545.40 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs.

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 71.00 2045.25 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 71.00 1704.38 No

supplying & erecting 2 CORE 6SQ.MM ALLUMINUM SARVICE (BLACK)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : From Sardar Circle To Thebi Dam Chital Road, At. Amreli

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mm X 200mm X12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts.

Approx Pole weight 59 kg 2.00 14316.75 No

Providing and erecting DECORATIVE bracket comprising main B Class

MS pipe. complete with suitable B Class M.S. sleeve tubing of approx.

45cms. length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread

of 1.coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] SINGAL Arm Bracket 1.Mtr 2.00 1838.00 No

[B] Double Arm Bracket 1.Mtr 44.00 3539.65 No

[C] TRIPAL Arm Bracket 1.Mtr 12.00 5241.29 No

[D] FOUR Arm Bracket 1 Mtr 1.00 6942.94 No

Providing and erecting Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired up to terminal block.IP 65 (ii)32-40W. (ii) above

Watts, Cat-lll (WARM WHITE) 130.00 9026.37 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/ 1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 130.00 306.79 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 119.99 Rmt

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables (B) 4 core 6 Sq. mm 250.00 204.53 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50mm dia. 200.00 69.54 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 12271.50 No

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V+5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed 1.00 5181.30 No

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. 40AMP FP ICS=100% of ICU only Cat III 1.00 2811.54 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 30 to

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T,BCH,T.C.,Siemens, C&S make) (a) for 25/32 A rating 1.00 4022.33 No

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 210.00 545.40 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs. 2.00 5454.00 No

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 59.00 2045.25 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 59.00 1704.38 No

supplying & erecting 2 CORE 6SQ.MM ALLUMINUM SARVICE (BLACK)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : From Center Point To Girls School, At. Amreli

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and erecting DECORATIVE bracket comprising main B Class

MS pipe. complete with suitable B Class M.S. sleeve tubing of approx.

45cms. length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread

of 1.coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] SINGAL Arm Bracket 1.Mtr 2.00 1838.00 No

[B] Double Arm Bracket 1.Mtr 18.00 3539.65 No

[C] TRIPAL Arm Bracket 1.Mtr 6.00 5241.29 No

[D] FOUR Arm Bracket 1 Mtr 1.00 6942.94 No

Providing and erecting Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired up to terminal block.IP 65 (ii)32-40W. (ii) above

Watts, Cat-lll (WARM WHITE) 60.00 9026.37 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/ 1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 60.00 306.79 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 119.99 Rmt

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables (B) 4 core 6 Sq. mm 250.00 204.53 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50mm dia. 200.00 69.54 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with angle iron

legs 45 cm long made from 35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V+5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed 1.00 5181.30 No

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. 40AMP FP ICS=100% of ICU only Cat III 1.00 2811.54 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 30 to

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T,BCH,T.C.,Siemens, C&S make) (a) for 25/32 A rating 1.00 4022.33 No

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 210.00 545.40 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs.

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 27.00 2045.25 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 27.00 1704.38 No

supplying & erecting 2 CORE 6SQ.MM ALLUMINUM SARVICE (BLACK)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : From Shivaji Chowk To Radheshyam Circle, At. Amreli

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mm X 200mm X12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kg 2.00 14316.75 No

Providing and erecting DECORATIVE bracket comprising main B Class

MS pipe. complete with suitable B Class M.S. sleeve tubing of approx.

45cms. length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread

of 1.coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] SINGAL Arm Bracket 1.Mtr 2.00 1838.00 No

[B] Double Arm Bracket 1.Mtr 59.00 3539.65 No

[C] TRIPAL Arm Bracket 1.Mtr 2.00 5241.29 No

[D] FOUR Arm Bracket 1 Mtr 1.00 6942.94 No

Providing and erecting Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired up to terminal block.IP 65 (ii)32-40W. (ii) above

Watts, Cat-lll (WARM WHITE) 130.00 9026.37 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/ 1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 130.00 306.79 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 250.00 119.99 Rmt

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables (B) 4 core 6 Sq. mm 250.00 204.53 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50mm dia. 200.00 69.54 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 12271.50 No

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V+5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed 1.00 5181.30 No

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. 40AMP FP ICS=100% of ICU only Cat III 1.00 2811.54 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 30 to

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T,BCH,T.C.,Siemens, C&S make) (a) for 25/32 A rating 1.00 4022.33 No

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 210.00 545.40 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs. 2.00 5454.00 No

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 64.00 2045.25 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 64.00 1704.38 No

supplying & erecting 2 CORE 6SQ.MM ALLUMINUM SARVICE (BLACK)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF DECORATIVE POST TOP LED

STREET LIGHTING SYSTEM

LOCATION : Shyam Circle To Savarkundla Bypas Chokdi, At. Amreli

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and erecting Street Light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class

G.I. sleeve tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having sufficient fasteners for

fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with

vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [B]

Double Arm Bracket 2 Mtr 137.00 2975.00 No

POLE PAINT WORK - One coat of Red oxide / primer and two coats of

Aluminium / PU paints 137.00 3000.00 No

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 6 Sq. mm 3760.00 141.00 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for

laying of cable. below ground/ road surface for enclosing cable (A)

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 3760.00 174.00 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 1300.00 81.00 Rmt

roviding 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. 137.00 3600.00 No

POLE SHIFTING & REMOVE OLD FOUNDATION 137.00 3225.00 No

supplying & erecting smc press moulded comosite FRP box.

250mm*200mm*100mm deep 137.00 900.00 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 137.00 210.00 No

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs. 13.00 2250.00 No

Providing and erecting Street Light pole base plate & j- olt (200mm X

200mm X 12mm base plate, 4-M20 Bolts and 600mm long )with

necessary G.I. J Bolts 137.00 1500.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- GRANT RECEIVED FROM THE GUDC DEPARTMENT

NAME OF WORK :- PROVIDING, SUPPLYING, LOWERING, LAYING AND JOINTING OF OBSTRUCTIVE D.I.

WATER SUPPLY PIPE LINE UTILITY SHIFTING IN THE PORTION OF RAILWAY OVER BRIDGE WORK

LOCATION : Lathi Road, Nr. Railway Crossing to Bypass and Collage Circle, At. Amreli

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and supplying D.I. K-7 pipes for following nominal bore diameter

with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. (IS

8329-2000) Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022 200mm dia D.I. K-7 Pipe

250mm dia D.I. K-7 Pipe 490.00 2466.00 Rmt

300mm dia D.I. K-7 Pipe 569.00 3110.00 Rmt

350mm dia D.I. K-7 Pipe 2019.00 3858.00 Rmt

400mm dia D.I. K-7 Pipe 569.00 4583.00 Rmt

M.S. specials flanged ends 5846.00 98.00 Kg

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot

bends, tees, reducers or any other specials as per BS-EN-545/1995

Class-A series K12 suitable for use with D.I. Pipes manufactured as per

IS:8329/1994 delivery of specials is to be made to GWSSB store or site of

works anywhere in Gujarat including all taxes, loading, unloading, carting,

stacking, insurance, inspection charges, octroi etc. complete with external

bitumen & zink coating & internal cement mortar lining. Flanged ended

350mm dia & above 6445.00 158.00 Kg

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

complete Sluice valve with ISI mark only PN-1 with hand wheel / cap

operated (PD type short body) 100mm dia 14.00 3563.00 No

Providing and supplying C. I. Air valves of approved make & quality of

following class and diameter including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. Air valves

double acting (DS2) 50mm dia 5.00 2496.00 No

Providing, supplying and delivery of CI Manhole frame and cover incl. all

taxes, loading, unloading and carting upto departmental stores etc. comp.

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and strutting if required as per required

gradient and line including safety provisions using site rails and stacking

excavated stuff including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified. Up to 1.50 mt. depth a) In all

sorts of soil and soft murrum 1271.06 102.35 Cum

b) In hard murrum, boulders incl. macadam road 3086.86 155.25 Cum

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking,

chiseling, or by chiseling / breaking only 1089.48 427.80 Cum

From 1.50 mt. to 3.00 mt. depth b) In hard murrum, boulders incl.

macadam road 2905.28 170.20 Cum

c) In soft rock and / or masonry in CM or LM or Lime Concrete 726.32 205.85 Cum

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of various classes with CI / MS specials of

following diameters in proper position, grade and alignment as directed by

Engineer-in-charge including hydraulic testing etc. comp. 200mm dia D.I.

K-7 Pipe 569.00 113.85 Rmt

250mm dia D.I. K-7 Pipe 490.00 146.05 Rmt

300mm dia D.I. K-7 Pipe 569.00 178.25 Rmt

350mm dia D.I. K-7 Pipe 2019.00 216.20 Rmt

400mm dia D.I. K-7 Pipe 569.00 258.75 Rmt

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete Sluice valves 100mm dia 14.00 504.85 No

Air valves double ball Flanged 50mm dia 5.00 435.85 No

Erection of air valve riser by installing new M.S pipe of 6mm thick and

3.2mt length with necessary fittings such as flange of appropriate size, nut

bolts and embedded the pipe in RCC M:15 with offset of 10 cm around

pipe with necessary steel etc. complete Dia of Air Valve 50mm & MS

Pipe 5.00 3112.00 No

Dia of Air Valve 80mm & MS Pipe 15.00 4350.00 No

Construction of valves chambers in brick or bela stone masonry, locally

available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3

and cement pointing outside in C. M. 1:3 and top cover of precast RCC

slab 100 mm thick (with key hole in two parts, each with handles or MS

Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert

level incl. complete civil works incl. cost of excavation and refilling, with

cast in situ RCC slab in one single piece with fixing of CI-MH Frame and

cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick

masonry wall in C.M.1:6 with single piece 10 cm with fixing M.H. cover

Size 0.90 x 0.90 x 1.00 mtr. depth 28.00 8444.45 No

Size 1.30 x 1.30 x 1.00 mtr. Depth 11.00 12302.70 No

Refilling the pipeline trenches incl. ramming, watering, consolidating

disposal of surplus stuff as directed within a radius of 3 km. Refilling as

directed 8665.12 25.30 Cum

Making job connection for old pipes in connecting the pipe line with

existing main and inserted of special incl. cost of excavation, refilling,

cutting of pipes, dewatering testing, refitting etc. complete incl. all jointing

materials etc. comp. (excl. cost of specials, pipes fittings) 42.00 6500.00 Job

Providing C.C. M:100 for encasing pipe using trap metal size 12mm to

mm inct. From work cyring consolidation etc. complete for various

location on pipe line. Using trap metal 20mm nominal size 225.00 4730.87 Cum

Drilling of Horizontal bore hole for water main pipeline under the Railway /

Road tracks in all strata with required length including fixing of M.S. (or as

specified by Railway / Road authority) casing pipe of suitable size and

Thickness. Rate includes the cost of Drilling of bore hole, Casing pipe &

welding pushing etc complete but excluding the cost of water main, valves

and other items. Entire work should be as per Approved Drawing and as

per instruction of Railway / Road authority for Following diameter of Bore

hole. for MS pipe (13.1) Horizontal Drilling-900mm & MS Casing Pipe-

800mm Thick 12mm

(13.2) Horizontal Drilling-600mm & MS Casing Pipe-500mm Thick

(13.3) Horizontal Drilling-500mm & MS Casing Pipe-400mm Thick

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- GRANT RECEIVED FROM THE GUDC DEPARTMENT

NAME OF WORK :- PROVIDING, SUPPLYING, LOWERING, LAYING AND JOINTING OF OBSTRUCTIVE RCC

STORM WATER DRAINAGE PIPE LINE UTILITY SHIFTING IN THE PORTION OF RAILWAY OVER BRIDGE

LOCATION : Lathi Road, Nr. Railway Crossing to Bypass and Collage Circle, At. Amreli

SCHEDULE - "B-9"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and supplying ISI Standard R.C.C. pipes pipes horizontal

cast (of Sulphate Resisting Cement) in standard lengths of following

class and diameter suitable for either collar joints or rubber ring joints

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. (IS - 458/1989)

Note : One collar should be supplied with each full length plain ended

RCC pipe, cost included in rates below. One rubber ring should be

supplied with each full length socketed pipe, cost included in rates

below NP-3 Class Pipe Test Pressure 0.7 kg/cm² Horizontal Cast

600mm dia RCC pipe line 480.00 1946.00 Rmt

900mm dia RCC pipe line 1138.00 3601.00 Rmt

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at

store or at site of work precast RCC M.200 Frame & cover suitable to

drainage M.H. and as per type design & Drawing including cost of

reinforcement M.S. Angles or Flate, curring mold work etc. Heavy

Duty For Manhole Type : B & C > Frame suitable for 50cm

opening of MH 74.00 1121.00 No

> Cover suitable for 50cm opening of MH 74.00 1173.00 No

Providing and constructing Sewer manholes, scraper manholes and

unit house connection chamber, as per the type design in brick

masonry in C. M. 1:5 and inside and outside 20mm thick plastering in

C. M. 1:3 necessary 100 mm coping with reinforcement in R.C.C.M.

200 fixing C. I. steps and fixing manhole frame and covers (But

excluding supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but excluding

supplying of manhole covers) over scraper manhole etc. complete,

providing and fixing safety chain wherever necessary as per the

stipulations in the type design complete as per latest CPHEEO

manual. (incl. excavation)

Manhole type 'B' - Circular type, having inside diameter of

minimum 1500mm and for depth from 1.50m. to 4.00m. (for

150mm to 600mm dia sewers) > Manhole type 'B' Upto 1.50m

depth 30.00 24283.40 No

> Extra depth beyond 1.5 M but upto 4.0 M depth for type "B"

manhole. 60.00 14159.95 Rmt

Manhole type 'C' - Circular type, having inside diameter of

minimum 1500mm and for depth beyond 4.00m. to 6.00m. (for

150mm to 1800mm dia sewers) > Manhole type 'C' as above but

upto 4.00m depth 44.00 60844.20 No

> Extra depth beyond 4.0 M and upto 6.0 M depth for type "C"

manhole. 11.00 21603.90 Rmt

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and struting if required as per required

gradient and line including safety provisions using site rails and

stacking excavated stuff including up to all required lead cleaning the

site etc. complete for all lifts and strata as specified. Upto 1.50 mtr.

depth a) In all sorts of soil and soft murrum

b) In hard murrum, boulders incl. macadam road 2769.25 155.25 Cum

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting,

breaking, chiseling, or by chiseling/breaking only 1007.00 427.80 Cum

From 1.50 mtr. to 3.00 mtr. Depth b) In hard murrum, boulders

incl. macadam road 3524.50 170.20 Cum

c) In soft rock and / or masonry in CM or LM or Lime Concrete 1510.50 205.85 Cum

From 3.00 mtr. to 4.50 mtr. Depth c) In soft rock and / or masonry

in CM or LM or Lime Concrete 4437.00 215.05 Cum

Providing bedding incl. ramming, watering, consolidating etc.

complete. As per standard and instruction of engineer incharge

Selected excavated earth available near site 405.00 69.00 Cum

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following

diameters in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance from stores to

site of work, labour, giving hydraulic testing as per ISI code. Class NP-

3 pipe 600mm dia RCC pipe line 480.00 262.20 Rmt

900mm dia RCC pipe line 1138.00 391.00 Rmt

Refilling the pipeline trenches incl. ramming, watering, consolidating

disposal of surplus stuff as directed within a radius of 3 km. Refilling as

directed 12250.00 25.30 Cum

Drilling of Horizontal bore hole for water main pipeline under the

Railway / Road tracks in all strata with required length including fixing

of M.S. (or as specified by Railway / Road authority) casing pipe of

suitable size and Thickness. Rate includes the cost of Drilling of bore

hole, Casing pipe & welding pushing etc complete but excluding the

cost of water main, valves and other items. Entire work should be as

per Approved Drawing and as per instruction of Railway / Road

authority for Following diameter of Bore hole. for MS pipe (13.0)

Horizontal Drilling-1300mm & MS Casing Pipe-1200mm Thick

(13.1) Horizontal Drilling-900mm & MS Casing Pipe-800mm Thick

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- GRANT RECEIVED FROM THE GUDC DEPARTMENT

NAME OF WORK :- PROVIDING, SUPPLYING, LOWERING, LAYING AND JOINTING OF OBSTRUCTIVE RCC

UNDER GROUND DRAINAGE PIPE LINE UTILITY SHIFTING IN THE PORTION OF RAILWAY OVER BRIDGE

LOCATION : Lathi Road, Nr. Railway Crossing to Bypass and Collage Circle, At. Amreli

SCHEDULE - "B-10"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and supplying ISI Standard R.C.C. pipes pipes horizontal cast

(of Sulphate Resisting Cement) in standard lengths of following class

and diameter suitable for either collar joints or rubber ring joints

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. (IS - 458/1989)

Note : One collar should be supplied with each full length plain ended

RCC pipe, cost included in rates below. One rubber ring should be

supplied with each full length socketed pipe, cost included in rates

below NP-3 Class Pipe Test Pressure 0.7 kg/cm² Horizontal Cast

150mm dia RCC pipe line 210.00 331.00 Rmt

200mm dia RCC pipe line 90.00 417.00 Rmt

250mm dia RCC pipe line 403.00 527.00 Rmt

600mm dia RCC pipe line 660.00 1946.00 Rmt

Providing and supplying ISI Standard Stoneware pipes in standard

lengths of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete.

(IS - 651 / 1989) Class 'AA' 100mm dia Stoneware pipe 600.00 124.00 Rmt

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at

store or at site of work precast RCC M.200 Frame & cover suitable to

drainage M.H. and as per type design & Drawing including cost of

reinforcement M.S. Angles or Flate, curring mold work etc. Heavy Duty

For Manhole Type : B > Frame suitable for 50cm opening of MH 52.00 1121.00 No

> Cover suitable for 50cm opening of MH 52.00 1173.00 No

House Connection Chamber Light Duty(Size 0.60 x 0.45 m.) >

Frame 40.00 813.00 No

> Cover 40.00 920.00 No

Providing and constructing Sewer manholes, scraper manholes and

unit house connection chamber, as per the type design in brick

masonry in C. M. 1:5 and inside and outside 20mm thick plastering in

C. M. 1:3 necessary 100 mm coping with reinforcement in R.C.C.M.

200 fixing C. I. steps and fixing manhole frame and covers (But

excluding supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but excluding

supplying of manhole covers) over scraper manhole etc. complete,

providing and fixing safety chain wherever necessary as per the

stipulations in the type design complete as per latest CPHEEO manual.

(incl. excavation)

Manhole type 'B' - Circular type, having inside diameter of

minimum 1500mm and for depth from 1.50m. to 4.00m. (for 150mm

to 600mm dia sewers) > Manhole type 'B' Upto 1.50m depth 52.00 24283.40 No

> Extra depth beyond 1.5 M but upto 4.0 M depth for type "B"

manhole. 100.00 14159.95 Rmt

Providing and constructing rectangular brick masonry chamber for

house connection as per type design in brick masonry in C. M. 1:3

including M-100 in foundation M-150 in benching inside plastering in C.

M. 1:3 and outside plastering in C. M. 1:3 coping in M200 and fixing

RCC precast manhole frame and covers, but Excl. supply of manhole

and cover etc. complete incl. excavation. 40.00 9110.30 No

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and struting if required as per required

gradient and line including safety provisions using site rails and

stacking excavated stuff including up to all required lead cleaning the

site etc. complete for all lifts and strata as specified. Upto 1.50 mtr.

depth a) In all sorts of soil and soft murrum 857.00 102.35 Cum

b) In hard murrum, boulders incl. macadam road 1885.40 155.25 Cum

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting,

breaking, chiseling, or by chiseling/breaking only 685.60 427.80 Cum

From 1.50 mtr. to 3.00 mtr. Depth b) In hard murrum, boulders incl.

macadam road 1834.70 170.20 Cum

c) In soft rock and / or masonry in CM or LM or Lime Concrete 786.30 205.85 Cum

From 3.00 mtr. to 4.50 mtr. Depth c) In soft rock and / or masonry

in CM or LM or Lime Concrete 915.00 215.05 Cum

Providing bedding incl. ramming, watering, consolidating etc. complete.

As per standard and instruction of engineer incharge Selected

excavated earth available near site 261.00 69.00 Cum

Lowering, laying and jointing R.C.C. pipes in C. M. 1:1 1/2 of following

diameters in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance from stores to site

of work, labour, giving hydraulic testing as per ISI code. Class NP-3

pipe 150mm dia RCC pipe line 210.00 72.45 Rmt

200mm dia RCC pipe line 90.00 101.20 Rmt

250mm dia RCC pipe line 403.00 111.55 Rmt

600mm dia RCC pipe line 660.00 262.20 Rmt

Lowering, laying and jointing Stone Ware pipes of following diameters

with cement joints in C. M. 1:1 proportion in proper position, grade and

alignment at all level as directed by Engineer-in-charge including

conveyance from stores to site of work, Jointing material etc. comp.

100mm dia Stoneware pipe 600.00 66.70 Rmt

Refilling the pipeline trenches incl. ramming, watering, consolidating

disposal of surplus stuff as directed within a radius of 3 km. Refilling as

directed 5900.00 25.30 Cum

Drilling of Horizontal bore hole for water main pipeline under the

Railway / Road tracks in all strata with required length including fixing of

M.S. (or as specified by Railway / Road authority) casing pipe of

suitable size and Thickness. Rate includes the cost of Drilling of bore

hole, Casing pipe & welding pushing etc complete but excluding the

cost of water main, valves and other items. Entire work should be as

per Approved Drawing and as per instruction of Railway / Road

authority for Following diameter of Bore hole. for MS pipe (13.0)

Horizontal Drilling-1300mm & MS Casing Pipe-1200mm Thick

(13.2) Horizontal Drilling-600mm & MS Casing Pipe-500mm Thick

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer Chief Officer President

"DESIGN POINT" Amreli Nagarpalika Amreli Nagarpalika Amreli Nagarpalika

Amreli Amreli Amreli Amreli

AMRELI NAGARPALIKA - AMRELI

SCHEME :- 15TH FINANCE COMISSION GRANT YEAR-2024-25 (TIDE) 1ST INSTALLMENT

NAME OF WORK :- PROVIDING, SUPPLYING AND INSTALLING OF PUMPING MACHINERY

LOCATION : At Pomlipat Intake Well, At. Amreli

SCHEDULE - "B-11"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing & Supplying ISI Mark Vertical Submersible Pump V8-50HP,

Staige, 3500LPM, 2900RPM, 150m. Head incl Transporting, loading

unloading 1.00 242400.00 Nos

Providing & Supplying ISI Mark Copper Cable 3 Core X 10mm Flat 80.00 559.54 Rmt

Supplying & installation Control panel board Auto Transformer Starter

suitable for local & remote pump control application consisting of Auto

Transformer (vacuum impregnated, air cooled having three (3) tappings at

50%, 65% and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination including digital MFM with RS

communication port, analogue type ammeter with selector switch, run hour

meter,required protective relays & control accessories 1.00 85850.00 No

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

complete Sluice valve with ISI mark only PN-1 with hand / wheel cap

operated (PD type short body) 150mm 1.00 5906.48 Nos

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

complete. Reflux valves PN 1.0 IS 5312 with ISI mark 150mm 1.00 8107.27 Rmt

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete 150 mm 2.00 590.85 Nos

M.S. specials flanged ends Up to 300mm dia. 590.00 98.98 Kg

Providing and supplying ISI mark G. I. pipes with Couplings of following

class and diameter including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS -1239) (Not for well/tube

well column pipe) Heavy Duty 150mm 30.00 1484.70 Rmt

Lowering, laying and jointing G. I. pipes with G. I. specials of following

diameters in proper position, grade and alignment as directed by Engineer-

in-charge including conveyance from stores to site of work, labour, giving

hydraulic testing, etc. comple 150mm 30.00 49.49 Rmt

Lowering / Lifting of 3 phase submersible pump set with UPVC column

pipe into bore well inculding checking of therads of each pipe with coupling

/ welding & jointing cable with fuse unit box / control panel board including

fitting accessories by means of mechanised derrick / chain pulley block

including satisfactory testing. B) Above 150.00 to 300.00 meter depth

Providing & Fixing Stainley Make 500A Fuse 1.00 4696.50 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- SELF FUND \ GRUDA INFRASTRUCTURE DEVELOPMENT FUND

NAME OF WORK :- CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT

LOCATION: Ward No.8, Jesingpara, Omnagar Main Road, Near Sarsvati School Common Plot-1, Amreli

SCHEDULE - "B-12"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including removing the excavated stuff and depositing on the

road side slope as directed upto all lead and all strata 201.60 109.41 Cum

Crushed stone aggregate for machine cut hard quality (I) 40mm to 63mm

size all lead and lift 100.80 734.87 Cum

Supplying of Stone Dust all lead and lift 25.20 421.17 Cum

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 100.80 262.23 Cum

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed.. 25.20 154.84 Cum

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process. (A) With power roller 672.00 15.87 Sqmt

Providing and fixing pre-cast Rubber Dye /steel Dye inter locking concrete

block 60mm thick with grade of concrete M-300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS

15658: 2006 including 35mm sand/stone dust/greet layer for levelling and

filling the joint with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete. 672.00 706.93 Sqmt

Providing cement vata (10cm.x 10cm.size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete. 472.00 24.28 Rmt

Supplying and erecting approved make GI Round single arms Pole. The

pole should be made as per IS. and shall be coated with hot dip galvanizing

as per IS 2629/2633/4759, with required base plate and integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mm X 7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable terminations as erected on suitable foundation

(included) with necessary GI nut-bolts/ J-Bolts. asper details given by

manufacturer considering site requirement. The length of poles are as

4 Mtr. Long Aluminium Casting + GI Pipe, Base 150mm & Top 90-

100mm dia round shape, 2 to 4mm thickness. 4 Ea. Mounting Hole,

standard weight. single Arms Length, Graphite Grey Colour. 23.00 10908.00 No

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat-III, 23.00 304.50 No

Supplying and erecting LED street light fittings with LEDs waltage 50 Watt.

and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with toughened

glass with company mark. LED driver efficiency> 85% as per approved

vender list make (fittings models LT-912) 50 Watt. 23.00 5000.00 Ea

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables, (A)

4 core 4 Sq. mm 254.00 156.80 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground/ road surface for enclosing cable (A) 50mm dia. 254.00 76.80 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate erection

to work uniform until erected with cement concrete foundation and 45 cm

high bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35x35x5mm MS Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick MS angle. 1.00 13606.80 No

Supplying & erecting approved make time switch with single pole air break

contacts suitable for 230V. 15/16A. complete with self starting motor driven

clock ‘ON’&’OFF’ automatic arrangement at any predetermined time during

each 24 hours, With nickel cadmium rechargeable battery backup erected

as directed.(b) 40 Amp. Cat III 1.00 3168.37 No

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load

(Bcurve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity 1.00 1667.50 No

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 92.00 217.50 Kg

Supplying & erecting power contactor, AC 3 duty for time switch complete

erected as per direction Cat III. (c) 4 pole 440V 16 Amp. 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire. 23.00 420.50 No

For using salt and charcoal / coke as required for pipe type earthing. 23.00 310.50 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the

surface as normal ground. 254.00 300.00 Rmt

Supplying & erecting earth pit of minimum bore dia. 150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS3043-

1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic values urrounded by highly conductive compound with high charge

dissipation suitable for following type of application swith chamber and

heavy duty cover. (A) (approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed

by agency and officer In charge has to ensure the value of earthing

resistane mentioned intest Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound) -Resistivity: -0.2 ohm/ meter

testing asper IEC 62561-2017, Voltage drop :-<1 volt at no load & dry

form, Sulphar content :-<2% 1.00 4591.46 No

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 115.00 115.99 Rmt

Providing And Supplying Krishna Cast Iron Powder Coating Bench 10.00 8080.00 No

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 23.30 157.15 Cum

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

machine cut stone aggregates 40 mm nominal size) and curing complete

including cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns

and Mass concrete 4.30 4118.64 Cum

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (B) COLUMNS: (ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 1.20 12577.32 Cum

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 7.40 9485.95 Cum

Filling available excavated earth(excluding rock in trenches plinth, sides of

foundation etc,) in layor not exceeding 20cm. In depth consolidating each

depo sited layer by ramming and watering. 6.20 136.91 Cum

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 1171.00 77.28 Kg

20mm thick sand faced cement plaster on walls up to height 10 mtrs. above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement :

3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) etc.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc

complete 61.40 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round square

or round bars with round headed bolts and nuts or by screws. (A) Plain

grill 210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead. 6.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter. 6.00 92.20 Sqmt

Providing and fixing on RCC beam an **MS frame of size 3.00 m ×

m** fabricated from **40 × 40 × 5 mm MS angle**, with **50 × 50 mm

galvanised wire mesh (GI Weld Mesh/Chain Link Mesh, as per approved

drawing)** fixed within the frame. The frame shall be supported on both

sides by **50 × 50 × 3 mm MS square pipe posts**, securely fixed to the

RCC beam by welding and/or anchor bolts, including all necessary cutting,

welding, grinding, drilling, nuts, bolts, clamps, anchor fasteners, and all

required hardware to complete the work in a sound and workmanlike

manner. The exposed MS surfaces shall be cleaned and finished with

**one coat of anti-corrosive metal primer** followed by **two coats of

approved synthetic enamel paint** of approved shade. The rate shall

include the cost of all materials, labour, tools and plants (T&P),

transportation, scaffolding (if required), loading, unloading, and all incidental

charges, complete as directed by the Engineer-in-Charge. 28.00 7524.50 No

Providing and supplying heavy-duty commercial-grade Gym Cycle

(Stationary Exercise Bike) suitable for indoor fitness use, having a sturdy

MS frame with powder-coated finish, adjustable seat height and handlebar,

belt/chain drive system, smooth and noiseless operation, adjustable

resistance mechanism, anti-skid pedals with foot straps, ergonomic design,

non-slip rubber base, maximum user capacity of not less than 120 kg, and

fitted with digital display indicating time, speed, distance, calories and pulse

(where applicable). The item shall be complete with all standard

accessories, manufacturer's warranty, transportation, loading, unloading

and installation at site, complete in all respects as directed by the Engineer-

in-Charge. 2.00 32825.00 No

Providing and supplying Air Walker (Pipe- structure made of MS. Pipe

(IS1239-2004) OF 4" inch 42 OD AND 32 OD OF 3 to 3.5mm thickness

Arm-structure made of MS pipe 42 OD 3 mm thickness .Bearing-Ball

bearing (SKF)Foot Rest-structure made of M.S. SHEET OF 2 mm

Thickness.Bearing Caps Made up of HDPE Material.Seats-structure made

of M.S. SHEET OF 3 TO3.5 mm Thickness.Pole Caps - Made up of HDPE

Material.Paint-Powder Coated (Thickness 90 micron) 1.00 42925.00 No

Providing and supplying Outdoor Open Gym – Double Shoulder Wheel

manufactured from heavy-duty M.S. pipe conforming to IS 1239:2004,

having main support structure of 4" (42 OD) and 32 OD M.S. pipe with

mm to 3.5 mm wall thickness. The rotating arm shall be fabricated from

OD M.S. pipe with 3.0 mm thickness. The equipment shall be fitted with

SKF ball bearings for smooth, maintenance-free operation. Bearing caps

and pole caps shall be made of HDPE material. The complete equipment

shall be treated with anti-rust process and finished with minimum 90-micron

polyester powder coating suitable for outdoor weather conditions. The item

shall include all standard accessories, foundation bolts, transportation,

loading, unloading, installation, testing and commissioning, complete in all

respects as directed by the Engineer-in-Charge. 1.00 30098.00 No

Fabrication, supply, and installation of a heavy-duty outdoor garden swing

using prime quality Mild Steel (MS) sections. The main support structure

shall be constructed using robust MS hollow square or rectangular pipes

formed into an 'A-frame' shape, connected by a heavy-gauge MS round

pipe top beam. The swing seat assembly shall feature an inner frame of

MS L-angles or square pipes, with horizontally welded MS flat bars or strips

to form a durable seat and backrest, complete with curved side armrests.

The overhead roof structure shall consist of a curved MS truss frame

covered with a corrugated Galvanized Iron (GI) or polycarbonate sheet for

weather protection. The seat suspension mechanism must include heavy-

duty MS chains or rods attached to high-quality ball bearings or heavy

hooks for smooth, noiseless swinging. All joints must be thoroughly welded,

ground smooth, and finished with a coat of anti-rust epoxy primer followed

by two coats of weather-resistant PU paint in charcoal grey or black color. 2.00 25755.00 No

Supply of healthy, premium-quality Palm Trees (specify height/type, e.g., 8-

10 feet) and plantation at the designated site. The scope of work includes

excavation of pits, supplying and filling with nutrient-rich Black Cotton Soil,

applying necessary organic manure/fertilizers, properly planting the trees,

compacting, and initial watering. 10.00 3535.00 No

Supplying of crushed stone aggregates, chippings etc. of machine cut

stone of following nominal size free ofdisintegrated pieces deletarious and

oraganic mater (for Bitumen surface dressing etc.) and grading as per

I.R.C. Code.(vii) 6mm 230.40 550.45 Cum

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 13.80 4245.09 Cum

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 60.00 195.42 Sqmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- SELF FUND \ GRUDA INFRASTRUCTURE DEVELOPMENT FUND

NAME OF WORK :- CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT

LOCATION : Ward No.8, Jesingpara, Omnagar Main Road, Near Sarsvati School Common Plot-2, Amreli

SCHEDULE - "B-13"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and depositing

on the road side slope as directed upto all lead and all strata 201.60 109.41 Cum

Crushed stone aggregate for machine cut hard quality (I) 40mm to 63mm

size all lead and lift 100.80 734.87 Cum

Supplying of Stone Dust all lead and lift 25.20 421.17 Cum

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 100.80 262.23 Cum

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. 25.20 154.84 Cum

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials) including filling in depressions which occur

during the process.(A) With power roller 672.00 15.87 Sqmt

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete. 672.00 706.93 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete. 472.00 24.28 Rmt

Supplying and erecting approved make GI Round single arms Pole. The

pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, with required base plate and

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/ J-Bolts. asper details

given by manufacturer considering site requirement. The length of poles

4 Mtr. Long Aluminium Casting + GI Pipe, Base 150mm & Top 90-

100mm dia round shape, 2 to 4mm thickness. 4 Ea. Mounting Hole,

standard weight. single Arms Length, Graphite Grey Colour. 23.00 10908.00 No

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat-III, 23.00 304.50 No

Supplying and erecting LED street light fittings with LEDs waltage

Watt. and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with

toughened glass with company mark. LED driver efficiency> 85% as per

approved vender list make (fittings models LT-912) 50 Watt. 23.00 5000.00 Ea

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables,

(A) 4 core 4 Sq. mm 254.00 156.80 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for

laying of cable. below ground/ road surface for enclosing cable (A) 50mm

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35x35x5mm MS Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 13606.80 No

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’&’OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed.(b) 40 Amp.Cat III 1.00 3168.37 No

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load

(Bcurve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity 1.00 1667.50 No

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting power contactor, AC 3 duty for time switch complete

erected as per direction Cat III. (c) 4 pole 440V 16 Amp. 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type earthing. 23.00 310.50 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 254.00 300.00 Rmt

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge has

to ensure the value of earthing resistane mentioned intest Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound) -

Resistivity: -0.2 ohm/ meter testing asper IEC 62561-2017, Voltage

drop :-<1 volt at no load & dry form, Sulphar content :-<2% 1.00 4591.46 No

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole) 23.00 809.01 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed 115.00 115.99 Rmt

Providing And Supplying Krishna Cast Iron Powder Coating Bench 10.00 8080.00 No

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 13.50 157.15 Cum

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 3.00 3095.24 Cum

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS (ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 1.90 9485.95 Cum

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 4.90 481.80 Cum

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs

having more than 10 cm and upto 13 cm. thickness 1.30 7454.03 Cum

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of reinforcement. 0.70 8518.14 Cum

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 439.40 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 31.60 4245.09 Cum

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional 7.70 629.83 Sqmt

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 111.60 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to

64 for finishing with a floating coat of neat cement slurry. 12.20 196.27 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete with interior plastering above floor two level for every

additional storey hight (2) Two coat plaster 45.50 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja &

Elevation Wall 7.50 43.04 Rmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) o and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble slab

25mm thick 9.90 2231.50 Sqmt

Providing and laying colour digital glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement. 18.70 868.55 Sqmt

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm. size

including anodized alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting etc, complete. (ii)

Fully Panelled. 7.40 5533.67 Sqmt

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)

with colour anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation 1.30 1175.56 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 111.60 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 45.50 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank

of required capacity each with all necessary fittings and connection etc.

complete on terrace. 1000.00 3.95 Lit

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials. 20.00 834.38 Rmt

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials. 70.00 876.90 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 5.00 72.65 Rmt

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 5.00 91.84 Rmt

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 5.00 148.11 Rmt

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (ii) 25mm dia. 2.00 263.77 No

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 4.00 186.83 No

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia. 2.00 314.72 No

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia. 2.00 308.72 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 2.00 101.90 No

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.

Cat. III 2.00 561.56 Pt

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A)

100mm dia. Each 2.00 282.16 Each

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and

filling brickbats with dry masonry work at top for 45cm. height including

covering the top with stone including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed. 1.00 3457.27 No

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line. 1.00 2932.92 Each

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia. 2.00 636.38 Each

Providing and fixing water closet squatting Pan (Indian type W.C. Pan)

size 580mm (Earthwork, bed concrete, foot reste and trap to be

measured and paid for separately) (A) Vitreous China.(I) Long pattern =

colour 2.00 983.80 Each

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover 2.00 291.33 Each

Providing and fixing 100mm size P or S trap for water closet squatting

pan including jointing the trap with the pan and soil pipe in cement Mortar

1:1 (1-Cement : 1-Fine sand) (A) Vitreous China. 2.00 332.39 Each

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In colour. 2.00 1484.89 Each

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps.(A) 100mm x

100mm size P type. 2.00 1292.19 Each

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead And stretta 23.30 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1-Cement: 3-coarse sand: 6-

machine cut stone aggregates 40mm nominal size) and curing complete

including cost of formwork in (A) Foundation and Plinth 5.00 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete 4.30 4118.64 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 1.20 12577.32 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 7.40 9485.95 Cumt

Filling available excavated earth(excluding rock in trenches plinth, sides

of foundation etc,) in layor not exceeding 20cm. In depth consolidating

each depo sited layer by ramming and watering. 6.20 136.91 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 1171.00 77.28 Kg

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. 61.40 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 61.40 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 6.00 92.20 Sqmt

Providing and fixing on RCC beam an **MS frame of size 3.00 m ×

m** fabricated from **40 × 40 × 5 mm MS angle**, with **50 × 50 mm

galvanised wire mesh (GI Weld Mesh/Chain Link Mesh, as per approved

drawing)** fixed within the frame. The frame shall be supported on both

sides by **50 × 50 × 3 mm MS square pipe posts**, securely fixed to the

RCC beam by welding and/or anchor bolts, including all necessary

cutting, welding, grinding, drilling, nuts, bolts, clamps, anchor fasteners,

and all required hardware to complete the work in a sound and

workmanlike manner. The exposed MS surfaces shall be cleaned and

finished with **one coat of anti-corrosive metal primer** followed by **two

coats of approved synthetic enamel paint** of approved shade. The rate

shall include the cost of all materials, labour, tools and plants (T&P),

transportation, scaffolding (if required), loading, unloading, and all

incidental charges, complete as directed by the Engineer-in-Charge. 28.00 7524.50 No

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges 2 SEATER U TYPE SWING (08 X 04 X 08 FT) (Drawing is

attached herewith in separate sheet) 2.00 36865.00 No

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges Wave Slide l15 x W02 X H5/6/7 (Drawing is attached herewith

in separate sheet) 1.00 37875.00 No

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges Duck Mary Go Round (5FT Dia H3) (Drawing is attached

herewith in separate sheet) 1.00 48985.00 No

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges 43 4 SEATER SEE SAW (06 X 03 X 03 FT) (Drawing is

attached herewith in separate sheet)

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges Curved Slide L15X W02XH5/6 (Drawing is attached herewith

in separate sheet) 1.00 38885.00 No

Providing & Erecting varous type of following GI Fabrication made kids

rides as per standard manufacture and as per direction by municipalityt

Incl. cost of required size foundation with cement concrete 1:2:4 (1:

cement: 2 coarse sand : 4-20mm nominal size crushed stone aggregate)

with curing etc. complete as per directed by Engineer-in-charges. The

work included all type of labour, Installation Charges, Material charges,

Transportation Charges & also including all types taxes & Government

charges Multicolour Mary Go Round (5FT Dia H3) 1.00 42925.00 No

Fabrication, supply, and installation of a heavy-duty outdoor garden swing

using prime quality Mild Steel (MS) sections. The main support structure

shall be constructed using robust MS hollow square or rectangular pipes

formed into an 'A-frame' shape, connected by a heavy-gauge MS round

pipe top beam. The swing seat assembly shall feature an inner frame of

MS L-angles or square pipes, with horizontally welded MS flat bars or

strips to form a durable seat and backrest, complete with curved side

armrests. The overhead roof structure shall consist of a curved MS truss

frame covered with a corrugated Galvanized Iron (GI) or polycarbonate

sheet for weather protection. The seat suspension mechanism must

include heavy-duty MS chains or rods attached to high-quality ball

bearings or heavy hooks for smooth, noiseless swinging. All joints must

be thoroughly welded, ground smooth, and finished with a coat of anti-rust

epoxy primer followed by two coats of weather-resistant PU paint in

charcoal grey or black color. 2.00 25755.00 No

Supply of healthy, premium-quality Palm Trees (specify height/type, e.g.,

8-10 feet) and plantation at the designated site. The scope of work

includes excavation of pits, supplying and filling with nutrient-rich Black

Cotton Soil, applying necessary organic manure/fertilizers, properly

planting the trees, compacting, and initial watering. 10.00 3535.00 Rmt

Supplying of crushed stone aggregates, chippings etc. of machine cut

stone of following nominal size free ofdisintegrated pieces deletarious and

oraganic mater (for Bitumen surface dressing etc.) and grading as per

I.R.C. Code. (vii) 6mm all lead and lift 230.40 550.45 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- SELF FUND \ GRUDA INFRASTRUCTURE DEVELOPMENT FUND

NAME OF WORK :- CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT

LOCATION : Ward No.8, Jesingpara, Dhari Road, Akshardham Society, Common Plot, Amreli

SCHEDULE - "B-14"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and depositing

on the road side slope as directed upto all lead and all strata 210.00 109.41 Cum

Crushed stone aggregate for machine cut hard quality (I) 40mm to 63mm

size all lead and lift 105.00 734.87 Cum

Supplying of Stone Dust all lead and lift 26.30 421.17 Cum

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 105.00 262.23 Cum

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. 26.30 154.84 Cum

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials) including filling in depressions which occur

during the process. (A) With power roller 700.00 15.87 Sqmt

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed /vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete. 700.00 706.93 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in

cement mortar 1:1 including neat cement finishing, watering etc.

complete. 110.00 24.28 Rmt

Supplying and erecting approved make GI Round single arms Pole. The

pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, with required base plate and

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/ J-Bolts. asper details

given by manufacturer considering site requirement. The length of poles

4 Mtr. Long Aluminium Casting + GI Pipe, Base 150mm & Top 90-

100mm dia round shape, 2 to 4mm thickness. 4 Ea. Mounting Hole,

standard weight. single Arms Length, Graphite Grey Colour. 10.00 10908.00 No

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat-III, 10.00 304.50 No

Supplying and erecting LED street light fittings with LEDs waltage

Watt. and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with

toughened glass with company mark. LED driver efficiency> 85% as per

approved vender list make (fittings models LT-912) 50 Watt. 10.00 5000.00 Ea

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables,(A)

4 core 4 Sq. mm 140.00 156.80 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for

laying of cable. below ground/ road surface for enclosing cable (A) 50mm

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35x35x5mm MS Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 13606.80 No

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’&’OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed.(b) 40 Amp.Cat III 1.00 3168.37 No

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load

(Bcurve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity 1.00 1667.50 No

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting power contactor, AC 3 duty for time switch complete

erected as per direction Cat III. (c) 4 pole 440V 16 Amp. 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type earthing. 10.00 310.50 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 140.00 300.00 Rmt

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per

IS3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of

25mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge has

to ensure the value of earthing resistane mentioned intest Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound) -

Resistivity: -0.2 ohm/ meter testing asper IEC 62561-2017, Voltage

drop :-<1 volt at no load & dry form, Sulphar content :-<2%

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole) 10.00 809.01 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed 50.00 115.99 Rmt

Providing And Supplying Krishna Cast Iron Powder Coating Bench 7.00 8080.00 No

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 24.70 157.15 Cum

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 3.50 3095.24 Cum

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete 4.30 4118.64 Cum

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Filling available excavated earth(excluding rock in trenches plinth, sides

of foundation etc,) in layor not exceeding 20cm. In depth consolidating

each depo sited layer by ramming and watering. 12.90 136.91 Cum

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 801.00 77.28 Kg

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. 31.10 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 31.10 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 6.00 92.20 Sqmt

Providing and fixing on RCC beam an **MS frame of size 3.00 m ×

m** fabricated from **40 × 40 × 5 mm MS angle**, with **50 × 50 mm

galvanised wire mesh (GI Weld Mesh/Chain Link Mesh, as per approved

drawing)** fixed within the frame. The frame shall be supported on both

sides by **50 × 50 × 3 mm MS square pipe posts**, securely fixed to the

RCC beam by welding and/or anchor bolts, including all necessary

cutting, welding, grinding, drilling, nuts, bolts, clamps, anchor fasteners,

and all required hardware to complete the work in a sound and

workmanlike manner. The exposed MS surfaces shall be cleaned and

finished with **one coat of anti-corrosive metal primer** followed by **two

coats of approved synthetic enamel paint** of approved shade. The rate

shall include the cost of all materials, labour, tools and plants (T&P),

transportation, scaffolding (if required), loading, unloading, and all

incidental charges, complete as directed by the Engineer-in-Charge.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- SELF FUND \ GRUDA INFRASTRUCTURE DEVELOPMENT FUND

NAME OF WORK :- CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT

LOCATION : Ward No.8, Jesingpara, Dhari Road, Rokadnagar, Common Plot-1, Amreli

SCHEDULE - "B-15"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a base

for road work including removing the excavated stuff and depositing on the

road side slope as directed upto all lead and all strata 157.20 109.41 Cum

Crushed stone aggregate for machine cut hard quality (I) 40mm to 63mm

size all lead and lift 78.60 734.87 Cum

Supplying of Stone Dust all lead and lift 19.70 421.17 Cum

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 78.60 262.23 Cum

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed.. 19.70 154.84 Cum

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process.(A) With power roller 523.80 15.87 Sqmt

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS

: 2006 including 35 mm sand/stone dust/greet layer for levelling and filling

the joint with sand in proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete. 523.80 706.93 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete. 449.00 24.28 Rmt

Supplying and erecting approved make GI Round single arms Pole. The pole

should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, with required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mm X

7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for

cable terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/ J-Bolts. asper details given by manufacturer

considering site requirement. The length of poles are as below.

4 Mtr. Long Aluminium Casting + GI Pipe, Base 150mm & Top 90-

100mm dia round shape, 2 to 4mm thickness. 4 Ea. Mounting Hole,

standard weight. single Arms Length, Graphite Grey Colour. 23.00 10908.00 No

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat-III, 23.00 304.50 No

Supplying and erecting LED street light fittings with LEDs waltage 50 Watt.

and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with toughened

glass with company mark. LED driver efficiency> 85% as per approved

vender list make (fittings models LT-912) 50 Watt. 23.00 5000.00 Ea

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand/

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench/ pipe of following size of cables,(A) 4 core 4 Sq.

Providing & laying approved make double walled corrugated pipes (DWC) of

polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground/ road surface for enclosing cable (A) 50mm dia. 245.00 76.80 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erection to

work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally supported

on both side, with internal and outside looking arrangement with look and

keys in duplicate 35x35x5mm MS Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint. section pillar roof

should be without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs 45 cm long made from

X 35 X 5 mm thick MS angle. 1.00 13606.80 No

Supplying & erecting approved make time switch with single pole air break

contacts suitable for 230V. 15/16A. complete with self starting motor driven

clock ‘ON’&’OFF’ automatic arrangement at any predetermined time during

each 24 hours, With nickel cadmium rechargeable battery backup erected

as directed.(b) 40 Amp. Cat III 1.00 3168.37 No

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load (Bcurve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity 1.00 1667.50 No

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 92.00 217.50 Kg

Supplying & erecting power contactor, AC 3 duty for time switch complete

erected as per direction Cat III. (c) 4 pole 440V 16 Amp. 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 23.00 420.50 No

For using salt and charcoal / coke as required for pipe type earthing. 23.00 310.50 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the

surface as normal ground. 245.00 300.00 Rmt

Supplying & erecting earth pit of minimum bore dia. 150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS3043-

1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic values urrounded by highly conductive compound with high charge

dissipation suitable for following type of application swith chamber and heavy

duty cover. (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by agency

and officer In charge has to ensure the value of earthing resistane

mentioned intest Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound) -Resistivity: -0.2 ohm/ meter testing asper

IEC 62561-2017, Voltage drop :-<1 volt at no load & dry form, Sulphar

content :-<2% 1.00 4591.46 No

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for

& 6 mtr pole) 23.00 809.01 No

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed 115.00 115.99 Rmt

Providing And Supplying Krishna Cast Iron Powder Coating Bench 10.00 8080.00 No

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 24.70 157.15 Cum

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 3.50 3095.24 Cum

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and

Mass concrete 4.30 4118.64 Cum

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 1.20 12577.32 Cum

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional

area more than 0.08Sq.M and upto 0.12 Sq.M 3.70 9485.95 Cum

Filling available excavated earth(excluding rock in trenches plinth, sides of

foundation etc,) in layor not exceeding 20cm. In depth consolidating each

depo sited layer by ramming and watering. 12.90 136.91 Cum

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 801.00 77.28 Kg

20mm thick sand faced cement plaster on walls up to height 10 mtrs. above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement :

sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) etc. 31.10 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

complete 31.10 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round square

or round bars with round headed bolts and nuts or by screws. (A) Plain grill 210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead. 6.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter. 6.00 92.20 Sqmt

Providing and fixing on RCC beam an **MS frame of size 3.00 m × 2.10 m**

fabricated from **40 × 40 × 5 mm MS angle**, with **50 × 50 mm galvanised

wire mesh (GI Weld Mesh/Chain Link Mesh, as per approved drawing)**

fixed within the frame. The frame shall be supported on both sides by **50 ×

50 × 3 mm MS square pipe posts**, securely fixed to the RCC beam by

welding and/or anchor bolts, including all necessary cutting, welding,

grinding, drilling, nuts, bolts, clamps, anchor fasteners, and all required

hardware to complete the work in a sound and workmanlike manner. The

exposed MS surfaces shall be cleaned and finished with **one coat of anti-

corrosive metal primer** followed by **two coats of approved synthetic

enamel paint** of approved shade. The rate shall include the cost of all

materials, labour, tools and plants (T&P), transportation, scaffolding (if

required), loading, unloading, and all incidental charges, complete as

directed by the Engineer-in-Charge. 14.00 7524.50 No

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges 2 SEATER U TYPE

SWING (08 X 04 X 08 FT) (Drawing is attached herewith in separate

sheet) 2.00 36865.00 No

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges Wave Slide l15 x W02

X H5/6/7 (Drawing is attached herewith in separate sheet)

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges Duck Mary Go Round

(5FT Dia H3) (Drawing is attached herewith in separate sheet)

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges 4 SEATER SEE SAW

(06 X 03 X 03 FT) (Drawing is attached herewith in separate sheet)

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges Curved Slide L15X

W02XH5/6 (Drawing is attached herewith in separate sheet)

Providing & Erecting varous type of following GI Fabrication made kids rides

as per standard manufacture and as per direction by municipalityt Incl. cost

of required size foundation with cement concrete 1:2:4 (1: cement: 2 coarse

sand : 4-20mm nominal size crushed stone aggregate) with curing etc.

complete as per directed by Engineer-in-charges. The work included all type

of labour, Installation Charges, Material charges, Transportation Charges &

also including all types taxes & Government charges Multicolour Mary Go

Round (5FT Dia H3) 1.00 42925.00 No

Supply of healthy, premium-quality Palm Trees (specify height/type, e.g., 8-

10 feet) and plantation at the designated site. The scope of work includes

excavation of pits, supplying and filling with nutrient-rich Black Cotton Soil,

applying necessary organic manure/fertilizers, properly planting the trees,

compacting, and initial watering. 10.00 3535.00 No

Supplying of crushed stone aggregates, chippings etc. of machine cut stone

of following nominal size free ofdisintegrated pieces deletarious and oraganic

mater (for Bitumen surface dressing etc.) and grading as per I.R.C. Code.

(vii) 6mm all lead and lift 130.50 550.45 Cum

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional 13.80 4245.09 Cum

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Amreli Nagarpalika

Chief Officer President

Amreli Nagarpalika Amreli Nagarpalika

AMRELI NAGARPALIKA - AMRELI

SCHEME :- SELF FUND \ GRUDA INFRASTRUCTURE DEVELOPMENT FUND

NAME OF WORK :- CONSTRUCTION WORK OF COMMON PLOT DEVELOPMENT

LOCATION : Ward No.8, Jesingpara, Dhari Road, Rokadnagar, Common Plot-2, Amreli

SCHEDULE - "B-16"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all lead

and lift. 675.00 49.11 Sqmt

Labour work For Refitting of Paving Block and Completing work with

finishing and proper base of paving block, levelling the road.etc 540.00 452.48 Sqmt

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and depositing

on the road side slope as directed upto all lead and all strata

Crushed stone aggregate for machine cut hard quality (I) 40mm to 63mm

size all lead and lift 233.30 734.87 Cumt

Supplying of Stone Dust all lead and lift 58.30 421.17 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 233.30 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed.. 58.30 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials) including filling in depressions which occur

during the process.(A) With power roller 1555.00 15.87 Sqmt

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete. 1015.00 706.93 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

Supplying and erecting approved make GI Round single arms Pole. The

pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, with required base plate and

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm X 7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/ J-Bolts. asper details

given by manufacturer considering site requirement. The length of poles

4 Mtr. Long Aluminium Casting + GI Pipe, Base 150mm & Top 90-

100mm dia round shape, 2 to 4mm thickness. 4 Ea. Mounting Hole,

standard weight. single Arms Length, Graphite Grey Colour. 15.00 10908.00 No

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Cat-III, 15.00 304.50 No

Supplying and erecting LED street light fittings with LEDs waltage

Watt. and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with

toughened glass with company mark. LED driver efficiency> 85% as per

approved vender list make (fittings models LT-912) 50 Watt. 15.00 5000.00 Ea

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables,

(A) 4 core 4 Sq. mm 210.00 156.80 Rmt

Providing & laying approved make double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for

laying of cable. below ground/ road surface for enclosing cable (A) 50mm

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35x35x5mm MS Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 13606.80 No

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’&’OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed.(b) 40 Amp., Cat III 1.00 3168.37 No

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load

(Bcurve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity 1.00 1667.50 No

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting power contactor, AC 3 duty for time switch complete

erected as per direction Cat III. (c) 4 pole 440V 16 Amp. 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type earthing. 15.00 310.50 No

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and making

the surface as normal ground. 210.00 300.00 Rmt

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge has

to ensure the value of earthing resistane mentioned intest Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound) -

Resistivity: -0.2 ohm/ meter testing asper IEC 62561-2017, Voltage

drop :-<1 volt at no load & dry form, Sulphar content :-<2%

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole) 15.00 809.01 No

Supplying and erecting Flexible PVC insulated multi strand multi core

kv grade ISI marked copper wires of following size to be erected as

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed 75.00 115.99 Rmt

Providing And Supplying Krishna Cast Iron Powder Coating Bench 5.00 8080.00 No

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 29.10 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 5.00 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete 4.30 4118.64 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 1.20 12577.32 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Filling available excavated earth(excluding rock in trenches plinth, sides

of foundation etc,) in layor not exceeding 20cm. In depth consolidating

each depo sited layer by ramming and watering. 12.00 136.91 C

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto floor

two level 1171.00 77.28 Kg

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. 61.40 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 61.40 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 6.00 92.20 Sqmt

Providing and fixing on RCC beam an **MS frame of size 3.00 m ×

m** fabricated from **40 × 40 × 5 mm MS angle**, with **50 × 50 mm

galvanised wire mesh (GI Weld Mesh/Chain Link Mesh, as per approved

drawing)** fixed within the frame. The frame shall be supported on both

sides by **50 × 50 × 3 mm MS square pipe posts**, securely fixed to the

RCC beam by welding and/or anchor bolts, including all necessary

cutting, welding, grinding, drilling, nuts, bolts, clamps, anchor fasteners,

and all required hardware to complete the work in a sound and

workmanlike manner. The exposed MS surfaces shall be cleaned and

finished with **one coat of anti-corrosive metal primer** followed by **two

coats of approved synthetic enamel paint** of approved shade. The rate

shall include the cost of all materials, labour, tools and plants (T&P),

transportation, scaffolding (if required), loading, unloading, and all

incidental charges, complete as directed by the Engineer-in-Charge.

Excavation for foundation up to 1.5 M Depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata 13.50 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 3.00 3095.24 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS (ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 4.90 481.80 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs

having more than 10 cm and upto 13 cm. thickness 1.30 7454.03 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of reinforcement. 0.70 8518.14 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 17.80 4245.09 Cumt

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 51.60 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to

64 for finishing with a floating coat of neat cement slurry. 12.20 196.27 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete with interior plastering above floor two level for every

additional storey hight (2) Two coat plaster 45.50 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja &

Elevation Wall 7.50 43.04 Rmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble slab

25mm thick 9.90 2231.50 Sqmt

Providing and laying colour digital glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm. size

including anodized alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting etc, complete. (ii)

Fully Panelled. 7.40 5533.67 Sqmt

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)