Maintenance and Operation of Subways, Storm Water Pumps, FOBs and related electrical installation, LT Panel Board, DG Set and Dewatering Pumps under PWD South East New Delhi.

Location of Lift: Krishi Vihar FOB (Towards Chirag Delhi) Speed 1 MPS Floors- G+1 Travel- upto 6 Meters (approx.) Size (WXH): Clear Opening About 900mm X 2000 mm High Stops & Opening- 2 Stops & 2 Openings (All Floor are Opening Same Side) Controller: Controller: Microprocessor based with V3F drive Automatic rescue device complete with dry maintenance free batteries as required. Operation: Full Collective Simplex Door Operation: Automatic. Face Plate Finish: Stainless Steel Power- 415 V, 3 Phase, 50 Hz, Alternating Current Type of Door: Car Entrance: Protected by SS 304 Moonrock/ Honeycomb Center Opening. (b) Landing doors: SS landing doors in moon rock, power operated, centre opening horizontal sliding (as per approved by E-in-C). Flooring: Granite with 20mm thickness (as per approved by E-in-C). The lift should be suitably equipped for disable person(handrail etc.) The bar/rail shall be circular section of 38-50 mm in dimension and complete with Braille button. Handrail of sufficient length at 900 mm above floor level to be fixed in the lift car. Braille operating buttons system as required in each car and at all levels. The button shall be placed in suitable location for access of handicapped person

Car flooring shall be done in this item also. Battery operated emergency light and alarm bell Full height infra red door screen. Fire main switch, false ceiling in car, vandal proof SS button, over load warning indicator , floor annunciator with music, pit ladder.(ceiling should be suspend laser cut with diffused light setting and pressure fan mounted on the roof (hidden). Car Fittings - LED Light & Regular Circular Fan Car side< vibration finish with mirror finish center band. Car recast panel-Vibration finish with mirror finish center band. Car return panel- Vibration finish Car door-Mirror finish. In case of power failure the battery should be able to run LED light, exhaust fan for at least 1 hr. NOTE: Dismantling of Existing lift & Credit for dismantle material include in this estimate.

Location of Lift: NSIC FOB Speed 1 MPS Floors- G+1 Travel- upto 6 Meters (approx.) Size (WXH): Clear Opening About 900mm X 2000 mm High Stops & Opening- 2 Stops & 2 Openings (Gound Floor Enrty & 1st Floor Opposite Side Opening) Controller: Microprocessor based with V3F drive Automatic rescue device complete with dry maintenance free batteries as required. Operation: Full Collective Simplex Door Operation: Automatic. Face Plate Finish: Stainless Steel Power- 415 V, 3 Phase, 50 Hz, Alternating Current Type of Door: Center Opening/ Telescopic Door Opening Car Entrance: Protected by SS 304 Moonrock/ Honeycomb Center Opening. (b) Landing doors: SS landing doors in moon rock, power operated, centre opening horizontal sliding (as per approved by E-in-C). Flooring: Granite with 20mm thickness (as per approved by E-in-C). The lift should be suitably equipped for disable person(handrail etc.) The bar/rail shall be circular section of 38-50 mm in dimension and complete with Braille button. Handrail of sufficient length at 900 mm above floor level to be fixed in the lift car. Braille operating buttons system as required in each car and at all levels. The button shall be placed in suitable location for access of handicapped person

Car flooring shall be done in this item also. Battery operated emergency light and alarm bell Full height infra red door screen. Fire main switch, false ceiling in car, vandal proof SS button, over load warning indicator , floor annunciator with music, pit ladder.(ceiling should be suspend laser cut with diffused light setting and pressure fan mounted on the roof (hidden). Car Fittings - LED Light & Regular Circular Fan Car side< vibration finish with mirror finish center band. Car recast panel-Vibration finish with mirror finish center band. Car return panel- Vibration finish Car door-Mirror finish. In case of power failure the battery should be able to run LED light, exhaust fan for at least 1 hr. NOTE: Dismantling of Existing lift & Credit for dismantle material include in this estimate.