REPAIR/REWINDING OF CEILING FANS, EXHAUST FANS AND GEYSERS/SOLAR GEYSERS AT AF STN CHANDIGARH

Amount

Attending the complaints of non functional ceiling /exhaust fan of any sweep and testing and repairing the ceiling /exhaust fan without taking down by checking/replacing of fan condenser ,fan regulators hanging accessaries and connection of wires etc.,and making fan serviceable complete all as directed. ( Note.(a) items such as fan Capacitor, fan regulator ,flexible cable multi stranded 1.5 Sqmm 3 core wire shall be measured and paid separately (b) Repairing up to two fans at a time in one quarter will be CONSIDERED AS ONE COMPLAINT and more than two fans at a time , two complaints/visit shall be considered for same quarter.

Supply only capacitor 2.5 mfd for ceiling fans of any make/model/sweep,complete all as specified and directed by the Engr-in- Charge. Make:EPOS/NICCO/USHA/UNISTAR.

Supply only capacitor 3.15 mfd for ceiling fans of any make/model/sweep, complete all as specified and directed by the Engr-in-charge. Make: EPCOS/NICCO/USHA/UNISTAR.

Disconnecting and taking down the complete ceiling fan 1200/1400mm sweep with down rod from ceiling hook at any locations and carrying out rewinding with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing/oiling of bush and the bearings, replacement of missing / worn out nuts, bolts & washers etc. and testing after reassembling and refixing back on the same location and connecting complete all as specified and directed by Engr- in -Charge. Make of Wire: Devi Dayal / HTP Ltd Bombay / Victor Varnish, MODI /CHINAR/ LOTUS

Disconnecting and taking down the complete exhaust fan of 300 mm sweep from the existing location and open the same and carry out rewinding by dismantling from frame with and including super enameled copper wire of suitable gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing, lubricating, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing, including reassembly and refixing back on the same location complete all as specified and directed by Engineer – in - Charge for the following size: Make : Wire : Devi Dayal / HTP Ltd Bombay / Victor Varnish: MODI/CHINAR/ LOTUS

Disconnecting and taking down the complete exhaust fan of 450 mm sweep from the existing location and open the same and carry out rewinding by dismantling from frame with and including super enameled copper wire of suitable gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing, lubricating, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing, including reassembling and refixing back on the same location complete all as specified and directed by Engineer – in - Charge for the following size: Make : Wire : Devi Dayal / HTP Ltd Bombay / Victor Varnish: MODI/CHINAR/ LOTUS

Supply only fan blade of size 1200mm for replacing of old u/s fan blades all as specified and directed by Engr-in Charge.

Supply and replacement of ball bearing No 6202/6203 suitable for 1200/1400mm sweep ceiling fan of any model complete all as specified and directed by Engr-in- charge.

Supply and replacement of gun metal bush for any sweep /size/model of ceiling fan complete all as specified and directed by Engr-in-charge.

Supply and replacement of down rod for any sweep /size/model of ceiling fan complete upto 2 feet all as specified and directed by Engr-in- charge.

Supply and replacement of canopy for any sweep/size/model of ceiling fan complete all as specified and directed by Engr-in charge.

Supply and fix in replacement of louvers suitable for exhaust fan of size 450 mm sweep complete all as speicfied and directed by Engr-in-charge.

S&F in replacement of Ceiling fan brackets with safety pin all as specified and directed by Engr-in-charge.

Disconnecting and taking down the complete flame proof single/ 3 phase exhaust fan of 300 /450 mm sweep from the existing location and open the same and carry out rewinding by dismantling from frame with and including super enameled copper wire of suitable gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing, lubricating, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing, including reassembly and refixing back on the same location complete all as specified and directed by Engineer – in - Charge Make of Wire: Devi Dayal / HTP Ltd Bombay / Victor Varnish, MODI /CHINAR/ LOTUS

Supply and fix in replacement of ceiling fan rubber reel of size 25mmx20mm all as specified and directed by Engr-in-charge.

Supply and fixing of PVC insulated sheathed flexible cable, served with copper conductor of working voltage 1100 Volt grade, cross sectional area 0.75 Sq. mm x 3 core, fixed to ceiling rose to fan any stype of size with saddles including making connections as in repairs, complete all as directed

S&F safety locking pin for celling fans, compleate all as specified and directed by Engineer-in-Charge.

Attending the complaints of non functional geysers of capacity 25/50 ltrs and repairing it without taking down by checking/replacing heating elements, thermostats, PVC connections, indicating lamps, safety valves, MCBs and connection of wires etc.,and making geyser serviceable all as directed. ( Note.(i) items such as heating elements, thermostats,PVC connections, indicating lamps, safety valves, MCBs top and bottom plates and copper cable 2.5 Sqmm 3 core etc shall be measured and paid separately as 'supply only' )

Supply only PVC water connection heavy duty 450 mm long suitable for 15mm bore, ISI marked with flare nut and washers for inlet (cold water) connection

Supply only Heating element of capacity 2.00 kW (triangle type), ISI marked, suitable for geyser of capacity 25/ 50Ltr complete Make:- Ditz / Universal /TTE

Supply only Thermostat, ISI marked, suitable for geyser of capacity 25/ 50Ltr of any type / make complete all as directed by Engineer-in-charge. Make:- Ditz / Universal /TTE/RANCO/INDFOSS/DANFOSS

Suppy only Safety Valve suitable for Geyser of capacity 25 ltrs/50 ltrs

Supply only PVC insulated sheathed flexible cable, served with copper conductor of working voltage 1100 Volt grade, cross sectional area 2.5 Sq. mm x 3 core, fixed to wall / roof with saddles including making connections as in repairs, complete all as directed

Supply only plug top 3 pin 15 Amp, 240 Volts, complete all as directed and specified. MAKE: ANCHOR / SSK / CONA.

Supply only Top cover of geysers suitable for 25 litres/50 Ltrs capacity, complete with screw washers etc, fixed in repairs, complete all as specified and directed by Engineer-in-Charge

Supply only bottom cover of geysers suitable for 25 litres/50 Ltrs capacity, complete with screw washers etc, fixed in repairs, complete all as specified and directed by Engineer-in-Charge

Supply only Indicator lamp for with different colour lamps, red, yellow, green suitable for geyser of capacity 25/ 50 Ltr of any type / make complete all as directed by Engineer-in-charge Make : Siemens / L & T / AE

Taking down the Geyser of capacity 25 / 50 Ltr including disconnecting of electric / water supply connections from buildings for repair / replacement of defective components such as base assembly, inner shell etc and overhauling/painting of geyser including refixing the same after repair all as directed.

Supply and fix in replacement of inner shell of water heater with new copper inner shell of capacity 25 litre as per existing model, complete all as directed by Enginner-in Charge.

Supply and fix in replacement of inner shell of water heater with new copper inner shell of capacity 50 litre as per existing model, complete all as directed by Enginner-in Charge.

Supply and fix in replacement Base assembly/siphon assembly copper chromium plated suitable for geyser of 25 Ltr capacity of any make and type, complete with jointing materials like rubber sheet, nut & bolts, complete all as per revelent IS specification and directed by Engineer -in-Charge

Supply and fix in replacement Base assembly/siphon assembly copper chromium plated suitable for geyser of 50 Ltr capacity of any make and type, complete with jointing materials like rubber sheet, nut & bolts, complete all as per revelent IS specification and directed by Engineer -in-Charge

Supply and fix in replacement Chromium plated Gun metal NRV of size 15mm bore, ISI marked, complete all as specified and directed by Engineer-in-Charge. Make : Leader/Kirloskar/Sant

Supply and fix in replacement MS Wall fastener, 100mm long, 8mm dia ISI marked for exhaust fan Geyser fixing with washers, nuts, bolts complete all as specified and directed by Engineer-in-Charge.

Note:- Amount of credit of Rs. 63535.00 for retrieved materials is mentioned in Schedule of Credit Page No 108 of tender documents in pdf form which will be deducted offline while acceptance of tender.

PARTAP ENGINEERING WORKS

sscontractor engineers

GS Engineers

B N FRIENDS AND CO