SUPPLY, INSTALLATION,TESTING and COMMISSIONING OF 15 PASSENGERS ELEVATOR IN BUS STAND SHOPPING COMPLEX UNDER MATTANUR MUNICIPALITY

Amount

Typeof lift -15passenger lift

No oflift required- 1no

Load/persons-1020Kg/15persons

Rated speed-1 M/Sec

Travel-12mtr(approx)

No of floor and entrance served-Basement,Ground,First and second(4 opening 4)

No. of floor served-4 floors

Method of control-With/without attend Micro processorcontroller

Position of machine room-Above lift well

Size of lift well-2600mmx2100mm

Position of counter weight-Anyone side of the entrance

Size of car platform-As per ISS

Drive - Variable voltage variable frequency

Construction of design and furnishing of car body work-Stainless steel car with stainless steel door false ceiling,CFL spot lightingvendal proof car panels with fan,mirror,granitrflooring

Landing entrance -Automatic 2 speed side opening stainless steel vendal proof finish door as per ISS withprovision formechanical opening key for emergency

Bell indication and position-Up/down direction indication atalllanding

Electric supply -1)Light 230/50C/s single phase 2wire system 2)415V 50C/s 3 Phase 4 wire system

Machine-Energyefficient

Infra red door opening system-To be provide for entire length of the door

Automatic Rescue Device-Provide automatic rescue devisewith an electronic controller powered by 4 nos.12V 24AH dryfreemaintenance batteries.The rescue operations within 10seconds if power failure

Voltage stabilizer-Provider servo controll voltage stabilizer suitable for controll and motors

Indication in the car-Car position,call indicator,Door close/open push button,emergency stopbutton,flushmounted switch for the fan and light,non stopbutton,Battery operated emergency lamp with rechargeble batteries,battery operated alarm bell,intercom wiring with one master unit with 2 slaves

Winding handle -Manual windinghandle for use in emergency

Safeties -overspeed governer,operated safety gear,buffers,motor over load protection,phase reversal protection,other safeties as per ISS,Single phase preventer,Final limit switch

Levelling - Automatic levelling at all landing

Guarantee-Company shall carry out free maintenance during warranty period of 3 months and also includes a)cleaning lift equipment b)lubrication of all moving partsc)replacing of lubricating oil when required d)checking and adjusting contacts e) replacing fusible item ,alarm etc f)recharging batteries in case of drain/renewing batteries g)replacing/rewinding motors

Controll pannel-Controll pannel wil be dust and vermin proof of sheet metal enclosure

Announcement system-To provide lift announcement system

Tests-At site test as per IS to be carried out and approval from

Scope of work - a) Supply of lifting materials b) Minor civil works c)Scaffolding d) Door frame e) Supporting steel f) Temporary electric supply for installation of lift electric supply for testing & commissioning of lift is to be arranged by the firm on theire own account g) Intercom facilities h) Battery operator alaram i) Obtaining scheme approval as well energization certificate from the electric inspectorate including j) Supply of tool kite and booklet with complete details of maintanance schedule and controll diagram k) Giving training to department staff for attending trouble shooting l) Free servicing for 36 months after handing over

Supply,,installation,testing and commisioning of 20persons bed cum passengers lift with theabovespecifications

Part II Supply and wiring points according to IS 732/1989 using rigid PVC ivory conduit ofminimum size 20mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS3419-1988,fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1sqmm PVC insulated standard single core FR copper conductor cable 650V grade,including providing switch board main and contineous earthingwith 14swb bare copperearth conductor,required quantity of copper earth socket,brass bolt andnut crimping etc upto and including 6A modular type ROHS complaint SP switchesand making making good the surface of wall color washing etc complete.All the terminations in the switch board and DB's shall be tinned and the wires shall be drawn and fixed along the periphery ofthe box using suitable ties,tie mountsetcasrequired

Single control light point with 6A 3 plate ceilingrose

Single control light point without ceilingrose

Combined plug point with 6A, 5pin plug socket controlled by 6A switch in the same switch board as that of light points

Supply and fixingcast aluminium square shaped bulk head fittingwith front clearglass andmesh guard with 15W LED to wall/ceiling including giving connections with required lengthof 16/0.20mm PVC insulated and PVC sheathed 3 coreround copper conductorflex wire conforingto relevant ISS or extendingtheoriginalwiring and makung goodthe surface as reqyired

Supply,conveyance,installation,testing and commisioning 16W LED light fittingsmade from CRCA sheet 0.5mm thick with all accessories and lamps directly on wall byusing 2nos c/u clampand giving connections with 16/0.20mm 3 core PVC insulated and sheathed round copper conductor flex wire oe extending the original wiring and giving connctions as required

Supplyand fixing angle /straight brass lined skirt type,bakelite batten holder with 10W LED bulb and giving connection etc as required

20mm polished aluminium shade

Charges forcutting holes suitable foraccomodating exhaust fanof sizes exceeding 305mm sweepup to 450mmincluding plastering, color washing etc asrequired

Supply ,coveyance, installation,testing and commissioning of 305mm ,single phase,heavy duty,1400rpm exhaust fan.in metal frame of exhaust fans in the existing opening ,fixing necessory boltsand nuts,makinggoodthe damages etc asrequired including giving connections withrequired lengthof 24/0.20mm PVC insulated and PVCsheathed 3 core round copper conductor flex wire conforming to relevant ISS

Supply and fixing 20mm dia light gauge of PVC conduit conforming to IS 9537/1983 Part III along withall required accessories on surface including making good the damages etc asrequired

Supply and drawingG 650/1100V grade PVC insulated standared single core copper conductorcables conforming to IS 694 part I 1990 in the existing surface/recess cnduit as required including and giving necessiry connections of 21.50sqmm two run

Sullpy and fixing 3 moulded boxes in recess suitablefor modular accessories in surface /recess including maing good the damages ,color washing etc as required(ROHS)group B

3mould white /off white frontplate ROHS group B

16A SP1 way switch

6/16A socket

Supply and instalation of sheet steel,phosphatised and painted dust and vermin proof singlephase double cover 8 way enclosureof MCB DB IP 42,43 including copper/brass bus bar,neutral link,earth bus andDIN rail suitable for fixing MCB/isolator etc fixed on wall using suitable anchor bolts of fixed in recess including cutting hole on the wall,making good the damages,color washing etc asrequired

Supply and fixing the 40A,230V two pole isolators in the existing enclosure

25A,2pole ,30mA RCCB

Supply and fixing of 6A to 32A,10KA,SP MCB(C curve)and giving connections

Fabrication of fully partitioned ,dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 using 1.60mm CRCA sheet as per approved design and requirement,withfront and rear access facility,bus bar chambers,hingeddoors for all switch gear compartments,earthing the doors using 4sq mm braided copper conductor,providing necessory cut-outs for mounting meters,relays ,indication lamps ,bus bar interconnection etc ,detachable covers for bus bar chamber and cable alley ,painting the assembly with 2 coats synthetic enamel paint over a coat of zink chromate primer etcasrequired CRCA sheet alone be used for the fabrication. angles/flats /slotted angles etc shallnot be used forthe fabrication of panel assembly.The measurements should be taken the area of the complete sheetsuse for panel board including partitions,folding ,shrouding including controll wiring

Supply and providing the following sizeof SMC shhets in the panel as barriers and shrouding using required boltsand nuts including cuttingto shapes etc as required 2mm thick

Supply and fixing the following types of beading along the periphery of doors /other detachable cmpartments tomake the panel assembly dust and vermin proof including sticking with glue a)U section rubber beading suitable for 1.60/2.00mm sheet

Fabrication,supply,conveyance and installation of angleiron frame workfor wallmounting panel board using suitable size angle iron cut and welded toshape including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer,bolting theframe tothepanel using required bolt and nuts fixing the whole tothe wall making good the damages etc as required

Fabrication,Supply and fixing earth bus system with copper strip/conductor andconnecting all accessories as per rule including g tinning the points of contacts etc as required

S&F switch disconnector fud=se unit complete with handle assemble,door interlock and pad locking arrangement of 63A ,AC 23 A,TPN SDF for DIN fuse in the existing cubicalpanel

25/40A,DIN type fuse link of size 000

63A,4pole,100mA RCCB

40A,10kA,4pole MCB(C CURVE)

40A,10kA,SP MCB(D CURVE)

LED indicators for all voltage ranges-blue color

LED indicators for all voltage ranges-red,green,black,yellow or orange color

Aluminium anodised dangernotice board of size 200x150mm with inscriptions(both in english and malayalam)and convensional Skull and bone in red color

10.00sqmm 1run for controllwiring between switches and ELCB

Supplying layingand jointingof 40/32mm ornearest sizes ofdouble wall corrugated (DWC)pipes made out ofHDPE confirming to IS 14930 Part II for mechanicalprotection to underground power cables with all required accessories in ground

Supply and drawing bare earthing conductors of the following sizes alongwwith wiring /cables and giving connections as required 2.00mm Cu conductors(14 SWG)

3.15mm Cu conductor(10SWG)

Supply of superior qualityCu earth socket for the following sizes of the earth conductor including crimping etc as required 3.15mm(10SWG)

3.15mm(10SWG)

Supply and providingthe following sizes ofbolts and nut with the washers on the existing Msbox/earthbus etc asrequired including drilling necessory holes as required 25x3mm brass bolts and nuts

25x6mm brass bolts and nuts

Kamai Elevators private Limited