IMPROVEMENT TO JHAGADAJHAL D/W IN SOHELA BLOCK OF BARGARH DISTRICT UNDER IMPROVEMENT TO DW SCHEME FOR THE YEAR 2026-27.

Excavation, loading, unloading and carriage by mechanical means of all kind of soil including moorum. stoney earth, gravel etc. interspread with boulders up to 1/2 cum in size with all lifts and delifts including trimming of slopes and bed to design section and depositing the exca prials away from work site as per the specification and as directed by EIC within an initial lead of 1 km. from the place of excavation complete

Dismantling and removing R.C.C. Column,slab, staircase landing & stone masonery in lime or cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debris within 50m lead

Cement concrete M15 grade with crushed granite coarse aggregate of 20 mm down graded mixed in concrete mixture including cost of all materials ,machineries and labouer with all lead for materials upto the mixing yard and transportation of mixed concrete within initial lead of 50m and laying in dams, barrages,power house and pen stock with all lift/delift upto 1.50m height above average ground level etc. complete in all respect to proper slope & level with all cost, conveyance, royalty & other taes of all materials complete in all respect as directed by the Engineer-in-charge.

R.C.C. M20 grade with crushed granite coarse aggregate of 20 mm down graded mixed in concrete mixture including cost of all materials ,machineries and labouer with all lead for materials upto the mixing yard and transportation of mixed concrete within initial lead of 50m and laying in dams, barrages,power house and pen stock with all lift/delift upto 1.50m height above average ground level etc. complete in all respect to proper slope & level with all cost, conveyance, royalty & other taes of all materials complete in all respect as directed by the Engineer-in-charge.

Straightening, cutting, bending, binding, and tying of HYSD steel rod of approved specification laying the grills as per approved design & placing in position including cost,conveyance and other taxes complete in all respect including all leads and lifts from bending yard to placement spot with supplying of labour and T&P required binding wire 18 to 20 gauge for the work etc complete as per drawing and technical specification.(Weight of binding wire will not be considered for payment purpose.)

Rigid smooth centering and shuttering for R.C.C works in foundation of all heights with wooden & steel shuttering plates including supply of ties supports rigidly fixed and removal including making good to the damaged surface where necessary with all scaffolding gangway etc. with cost, conveyance and other taxes of all materials including all labour and T&P materials required for the item complete in all respect as directed by the Engineer-in-charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in -charge.

Filling in foundation and plinth with sand watering and ramming as directed by the Engineer-in-charge.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing

Rough stone dry packing in approns and revetments to all heights with hard stone 30 Cm and above size including spalls for filling and wedging with cost, conveyance, royalty and other taxes of all materials required for the work and finished to proper slope and level complete in all respect as directed by the Engineer-in-Charge.