PROVN OF TRAINING AND SPORTS/ GAMES INFRASTRUCTURE AT MIC AND S UNDER GE (SOUTH) AHMEDNAGAR

Amount

SCH 'A' PART-I (A): BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 5 signifies this fact only

NOTE: Schedule ‘A’ Part I(B), II to IX items have been Prepriced by MES and the Bidders shall insert their lumpsum cost in green field under Column-6 only.

Total amount of Sch 'A' Part-I (B) (Building/ Structures)

Total amount of Sch 'A' Part-II (Internal Water Supply)

Total amount of Sch 'A' Part-III (Internal Electrification)

Total amount of Sch 'A' Part-IV (Road, Path and Culvert)

Total amount of Sch 'A' Part-V (Sewage Disposal)

Total amount of Sch 'A' Part-VI (Area Drainage)

Total amount of Sch 'A' Part-VII (External Water Supply)

Total amount of Sch 'A' Part-VIII (External Electric Supply)

Total amount of Sch 'A' Part-IX (Site Clearance, Excavation and Earthwork)

NOTE: Schedule ‘A’ Part-I (B) to Part-IX items which are not Prepriced by MES are given in Sch 'A' Part-XI, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-X (MISCELLANEOUS B/R AND E/M WORKS)

Earth work in excavation by mechanical means (Hydraulic excavator) or manual means over areas, (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sq.M on plan) depth not exceeding 1.50 m in all kinds of soils, and getting out the excavated soil including disposal of excavated soil, complete all as specified.

Earth work in excavation by mechanical means (Hydraulic excavator) or manual means in all kinds of soils in trenches (not exceeding 1.5 m in width or 10 Sqm in plan) and not exceeding 1.5 m in depth; for foundations etc. or for shafts, walls, cesspits, manholes, pier holes, laying pipes or underground cables etc., including dressing of sides and ramming of bottoms, and getting out the excavated soil, complete all as specified.

S&F Pillar taps for 15 mm dia of pipe, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. Make : Jaquar cat no ALI-CHR-39011 or techno-commercial equivalent complete all as specified and directed.

S&F 15mm dia 2 Way bib cock with wall flange complete of Make : Jaquar cat no ALI-CHR-85041 or techno-commercial equivalent make series of makes given in Appendix 'C complete all as specified and directed.

S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink, environmental friendly, Energy efficient ready to use pack, 20 Watt, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable complete with all as specified and directed. Make:HAVELLS LED PRIDE ESSENTIAL Cat No LHEXAWP7UN1W020 or techno-commercial equivalent makes given in Appendix 'C'.

S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink, environmental friendly, Energy efficient ready to use pack, 10 Watt, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable complete with all as specified and directed. Make:HAVELLS LED PRIDE PLUS NEO Cat No LHEXACP71N1W010 or techno-commercial equivalent makes given in Appendix 'C'.

S&F Surface Spot light 1 x 12 watt, 230 volt with , LED light source 4000K with uniform light output, with all accessories including connections from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE FLOURES SURFACE SPOT LIGHT Item Code LHEEAKPDIE1W012 or techno-commercial equivalent makes given in Appendix 'C'.

S&F 360 degree Ceiling-Mount PIR Motion Sensor Switch with LUX Sensor in built Energy Saving Sensor, LUX Adjustment, Time Adjustment, Automatic Sensor of 220V with quick sense of maximum range up to 7 meters etc all as specified and as directed.

S&F Factory made mini MCB modular type white capacity 25 Amps including with MCB IP 43 protection 230 Volt all as specified and directed.

S&F Dimmer state Box continuously variable voltage transformer 4 Amps capacity 1 phase closed manually out transformer input voltage 230 V AC and out put voltage 270 V AC Make- Legrand/Schneider/Hager.

S&F LED high bay 200 Watt fittings with PDC aluminium housing and LED drive compartment suitable for ceiling (surface/suspended mounting) to provide great lighting experience to industrial applications lamp, complete all as specified and directed. MAKE: Bajaj Novabay 200W WH NB PC SD XE or Havells SAUCER NEXTGEN HIGHBAY - ADV SERIES Model No: SAUCERGENXADVPROHBP200WLED857 MOWBBORL or Crompton AQUILLA Model No CIP-329- 200-57-60D-HL5-LM-NGG

S&F Air circulator wall mounted fan of sweep 600mm, 1400RPM, single phase, single phase, with air delivery of capacity 250 CMM thermally protected motor, heavy duty gear box, 90 degree oscillation for wide coverage conforming to IS-2997-1964, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to AIR CIRCULATOR complete including grouting bolts nuts washers etc. all as specified and directed. Make-Havells turbo force wall model No. FHACWSTSCL24 or USHA Model No. Domiarire wall or Bajaj Model Name: Supreme Plus.

S&F Factory made powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole 25 KA, 160 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 8 way with suitable rated busbar, neutral link and MCB SP/TP as outgoings complete all as specified and directed. Note: MCCB and MCBs are not included in this item and paid separately.

S&F Factory made powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole 25 KA, 100 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 12 way with suitable rated busbar, neutral link and MCB SP/TP as outgoings complete all as specified and directed. Note: MCCB and MCBs are not included in this item and paid separately.

S&F Factory made powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole 25 KA, 63 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 8 way with suitable rated busbar, neutral link and MCB SP/TP as outgoings complete all as specified and directed. Note: MCCB and MCBs are not included in this item and paid separately.

S&F MCCB 4 Pole, 415 V, adjustable type, 160 Amps with breaking capacity 25 KA and making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, adjustable type, 100 Amps with breaking capacity 25 KA and making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCCB 4 Pole, 415 V, adjustable type, 63 Amps with breaking capacity 25 KA and making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCB SP,AC 240V, 6 to 32 Amps 10 KA capacity "C" series making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F, erect, test and commissioning of storage type water cooler with inbuilt UV purifier of storage capacity 120 Litres and cooling capacity 60 Litre with storage tank, all body material made out of stainless steel SS 304 of size 660x480x1355mm and 2 Nos of faucets one for cold water and one for normal water including 3 stages of purification (Sedimentation/Carbon/ UV filtration) with operating temperature 15°C to 45°C and working with AC,180-250 Volts supply complete to existing power sockets with 3 Core 1.5sqmm PVC multi standard copper wire complete.

Supply, installation, testing and commissioning of Split air conditioning unit 2 TR capacity (Inverter type) with HD filter, temperature display complete with cordless remote control, minimum 5 star labelled, latest energy efficient model eco friendly refrigerant gas, 6000 Kcal/Hr, 50 Hz, 240 volts, air cooled condenser with all accessories varied speed including fixing the outdoor unit on outdoor wall mounting brackets or on stand on terrace as per site requirement and fixing of room (high wall) unit on wall with necessary wall cutting/making hole (core cutting) to pass the refrigerant pipes, drain pipes, cables etc and making good to match with existing finishing complete, providing and making indoor to outdoor communication cable & copper tube connection upto a distance of 3 mtrs as provided by OEM, power cableing (Max 3.0 mtrs from enclosure) to units, first charging of refrigerant gas including cordless remote, providing drain piping of suitable size from unit upto ground level with proper clamping to wall complete all as specified. Make: Blue star,Daikin,Hitachi.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete suitable for inverter type AC all as specified and as directed. Makes : Automatic electrical (AE)/ Vinitec/APLABN Guard

M&L Construction of valve pit chamber of internal dimensions 450 mm x 450 mm x 450 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick brick wall built in cement mortar (1 :4) , 15 mm thick rendering all around the brick work in cement mortar (1 :6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 5 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L Cutting existing 80 mm dia pipe in position for inserting and including providing Tee of size 80 x 80 x 40 mm including lead joint and excavation etc complete all as specified and directed.

Supply & laying DWC HDPE Cable grade 450N duct pipe of size 63 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed.

Supply & laying DWC HDPE Cable grade 450N duct pipe of size 110 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed.

M&L for disconnection of HT/ LT connections from transformer of 315 KVA capacity from Old ORs quarters, 63 KVA transformer from MT Garrage and shifting of transformers at required site and connecting to HT 11000 volt incoming from existing two pole structure and LT cable to LT panel for both transformers including testing complete as directed by Engineer-in-Charge.

S&F Translucent conical Glass Fiber reinforced with a polymer matrix (GFRP) Helipole of length 7 m long standard of ANSI 136.20,85 EN 40-2-2004, top outer dia 105 mm, bottom outer dia 215 mm, thickness of pole is 6 mm induding LED Strip Inside the pole of approved colors complete all as specified and directed . Catalog No: RE-EN SOURCE HELIPOLE TRF-7-105-A 1-SF or techno-commercial equivalent as approved by GE.

S&F Double cross arm 1000mm long suitable for Helipoles complete with fittings all as specified and directed by Engr-in-Charge.

S&F PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 No of MCB SP 6 Amps & 4 way industrial connector including clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated, PVC sheathed wire 2.5 Sqmm copper & PVC conduit 20 mm dia. Make of Box- Spels Berg/Rittal/Hensel CAT NOK8350

Supply, install, testing and commissioning factory made and tested (including CPRI type test certified) L T panel board out door type, floor mounted, compartmantalised and IP-65 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed, having bus bar chamber with insulated Aluminium bus bars 1000 amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 50x50x6mm angle iron, totally powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement. The rate quoted shall include earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1 :4:8), D-2 filling in foundation, the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board ) and shall also comprising of the following accessories complete all as specified:-

Incoming

(a) MCCB 630 amps, 4 pole. 36 KA. 415 volts grade, with thermal magnetic- 01 No

(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 650 Amp, mounted on insulators for incoming supply - 01 No.

(c) Volt meter and Amp meter 415 volts, 50 Hz AC supply -01 set.

(d) Neon indicating lamps (R. Y & B) -01 Set.

Outgoing

(a) MCCB 400 amps, 3 pole, 36 KA, 415 volts grade with thermal magnetic- 01 No

(b) MCCB 200 amps, 3 pole, 36 KA, 415 volts grade with thermal magnetic- 01 No

(c) MCCB 100 amps, 3 pole, 25 KA, 415 volts grade with thermal magnetic- 01 No

Supply, install, testing and commissioning factory made and tested (including CPRI type test certified) L T panel board out door type, floor mounted, compartmantalised and IP-65 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed, having bus bar chamber with insulated Aluminium bus bars 600 amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 50x50x6mm angle iron, totally powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement. The rate quoted shall include earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1 :4:8), D-2 filling in foundation, the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board ) and shall also comprising of the following accessories complete all as specified:-

Incoming

(a) MCCB 400 amps, 4 pole. 36 KA. 415 volts grade, with thermal magnetic- 01 No

(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 650 Amp, mounted on insulators for incoming supply - 01 No. (c) Volt meter and Amp meter 415 volts, 50 Hz AC supply -01 set. (d) Neon indicating lamps (R. Y & B) -01 Set.

Outgoing (a) MCCB 63 amps, 3 pole, 25 KA, 415 volts grade with thermal magnetic- 01 No. (b) MCCB 100 amps, 3 pole, 25 KA, 415 volts grade with thermal magnetic- 01 No. (c) MCCB 160 amps, 3 pole, 25 KA, 415 volts grade with thermal magnetic- 01 No. (d) MCB 32 amps, 2 pole, 10 KA, 230 volts- 01 No. (e) MCB 10 amps, 2 pole, 10 KA, 230 volts- 01 No (f) Automatic street tight ON I OFF timer of capacity not less than 10 A, Three phase, 3 Pole with suitable capacity of contactor, relays , control wiring and all accessories all as specified.- 01 No

S&F cable route indicator made of round Cl disc embossed LT Cable, of size 16 cm dia 6 mm thick duly revitted with angle of size 50x50x4mm and 60 cm long including PCC 1:2:4 type B-1 using 20mm grades stone aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified.

S&F MCCB 4 Pole, 415 V, adjustable type, 100 Amps with breaking capacity 25 KA and making connection with suitable size of copper lugs etc complete all as specified and as directed

S&F MCCB 4 Pole, 415 V, adjustable type, 63 Amps with breaking capacity 16 KA and making connection with suitable size of copper lugs etc. complete all as specified and as directed.

S & F Copper tubes including nitrile rubber insulation suitable for inverter 2.0 Ton Split AC including necessary fittings/clamps for fixing on wall and connection to outdoor/indoor units complete leak test as per OEM and all as directed. Note: Suction and discharge pipe lines including nitrile rubber insulation shall be measured as one unit.

Providing and laying complete air-cushion type maple wood sports flooring system over an existing levelled and moisture-free concrete base for indoor multi-sports hall use, including all necessary materials, accessories, labour, tools, testing, and finishing as per the following specifications: (i) Top Surface: Supplying and installing 20–21 mm thick MFMA-approved kiln-dried, factory-seasoned hard maple wood flooring (North American origin), with IJ tongue-and-groove joints, random lengths from 600 mm to 1800 mm, width 68 mm to 100 mm, with one coat of polyurethane sealer on the underside before installation. (ii) Understructure: Providing and laying treated softwood sleepers (Pine) of size 63 mm to 70 mm wide and 38 mm to 45 mm thick ,treated with anti-termite and anti-fungal chemical,fixed at 305 mm c/c, perpendicular to the main flooring boards,laid floating (non fixed) on shock-absorbing layer. The IPS sub Floor, towelled and finished smooth, levelled to a tolerance of 3mm is to be provided for installation of the flooring system (iii) Shock Absorption Layer: High-resilience rubber pads, 19 mm thick, fixed at 305 mm c/c below each sleeper to meet EN 14904 or DIN 18032 standards. (iv) Vapour Barrier: 150-micron polyethylene sheet laid beneath the system with 150 mm lap joints.

(v) Surface Finishing: Entire surface to be machine sanded and finished with one coat of polyurethane wood primer and two coats of clear polyurethane lacquer, including game line marking for Badminton, Basketball, and Volleyball courts (01 court each) using polyurethane-based paint, conforming to EN 14904:2006. (Make for maple wood mills: Connor sports, Action floor Systems, Robbins, Horner flooring, Aacer sports flooring, Bona, Junckers, Chimiver or techno-commercial equivalent for surface finishing products). (vi) The work shall be got carried out through specialist firm Nupin Sports Flooring, CIDCO Chh Sambhajinagar, Aeroflex Sports Flooring MIDC Chh Sambhajinagar, ARS Wooden Flooring Powai Mumbai, PR sports flooring Jaipur. However, the contractor can carry out work by other agency with similar specification with prior approval of the GE.

M&L for erection and fixing of UV-stabilized HDPE anti bird net (24-ply,25x25mm mesh,min.twine strength 30kg/sqm),including perimeter anchorage with wire rope,SS eye bolts,clamps tensioners,cable ties and selvedge rope complete with all as specified and directed. Note: Necessary scaffolding,staging,ladder,safety platforms with personal protective equipments and working space arrangement upto 12.0mtr height shall be provided by the contractorat his own cost. The rate quoted for the respective items shall be inclusive of the same

D R CONSTRUCTION (BID ID -3445752)

M/S RAWANI CONSTRUICTION (BID ID -3441293)

SHREE KRISHNA INFRASTRUCTURE (BID ID -3445753)

SHRIPATI INFRASTRUCTURES PVT LTD (BID ID -3444890)

Sharda Infratech (BID ID -3445599)

SOOD ASSOCIATES PVT LTD (BID ID -3451585)

MUKESH CONSTRUCTION CO (BID ID -3451701)

M/s S. R. Constructions (BID ID -3445899)