Special Repair of Upgradation of SHC into HWC at Village Sardheri in Ambala District

Amount

Scraping. (HSR 8.32) (a) White Wash

Providing fixing PVC rain water pipe 6 Kg. Pressure of “Poly India” brand ISI marked in cement mortar during masonry work. (HSR 13.89(a)) (a) 100mm dia PVC pipe 6 Kg. Pressure

Providing & fixing PVC Bend ISI Mark. (HSR 13.90(a)) (a) 100mm dia PVC Bend

Providing and fixing Ist quality ceramic glazed wall tiles conforming to I.S.15662 (thickness to be specified by the manufecturer) of approved make in all colors, shades except burgundy ,bottle green, black of any size as approved by Engineer-in- Charge in skirting,risers of steps and dados over 12mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92(b)) (b) Size of ceramic Glazed tiles 300mm x 450mm

Providing and laying Baroda Green Marble Stone 17mm and above thick in risers of step, skirting, dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade ofmarble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer-in-Charge (Moulding). (HSR 14.98)

Painting two coats with synthetic enamel Paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler,consisting of white lead, linseed oil, varnish and chalk mittii including finishing Preparation of plastered surfaces for oil bound distemper including sand papering. (HSR 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint. (HSR 16.79(b) 1st quality

Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete. (HSR 17.82(c))

Providing and fixing in position 15mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge). (HSR 30.75) (a) Bib cock long body

(c) Bib cock

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge). (HSR 30.76(a)(ii)) Concealed stop cock with flange

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS. (HSR 30.110(b)(ii)) 20mm internal diameter

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). (HSR 30.119) 500 Ltr. Capacity

Providing of Tractor Trolly for dispose off the waste material i/c driver with fuel. (D.C. Rate)

Note :- In case of any difference in the unit & nomenclature of any of the HSR items of Civil items depicted in the DNIT and that given in HSR the unit and nomenclature given in HSR shall be applicable.

GORAV SINGH JOHAR