BID DOCUMENTS FOR CONSTRUCTION OF URBAN - PHC BUILDING WITH FURNITURE FOR KARAMSAD ANAND MUNICIPAL CORPORATION

// SCHEDULE - B //

Name of Work :- Construction of Urban - PHC Building With Furniture for Karamsad Anand Municipal Corporation

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

but may be Item of Work Unit According to

more or estimated quantities

less In Figure In Word

Excavation for foundation upto 1.5 mt.depth including sorting out and

Rupees One Hundred

stacking of unuseful materials and disposing off the excavated stuff

1 728.00 122.94 Twenty Two and Ninety Cmt

upto any lead. (A) Loose or soft soil

Four Paisas Only

Excavation for foundation 1.5 to 3.0 mt.depth including sorting out and Rupees One Hundred

2 314.00 stacking of unuseful materials and disposing off the excavated stuff 136.30 Thirty Six and Thirty Cmt

upto any lead. (A) Loose or soft soil Paisas Only

Filling availabale excavated earth (excluding rock) in trenches plinth,

Rupees One Hundred

sides of foundations etc. in layers not exceeding 20 cm in depth

3 577.00 136.92 Thirty Six and Ninety Cmt

consolidating each deposited layer by ramming and watering.

Two Paisas Only

Filling in plinth with sand under floors including watering ramming, Rupees Four Hundred

4 47.00 consolidating and dressing etc. complete 481.80 Eighty One and Eighty Cmt

Filling in foundation and plinth with murrum or selected soil in layers of Rupees Two Hundred

5 92.00 20cm. thickness including watering, ramming and consolidating etc. 294.38 Ninety Four and Thirty Cmt

complete. Eight Paisas Only

Providing Filling in Sunk Portion with cinder of best approved quality

Rupees Three Hundred

including watering ,ramming consolidation and dressing etc. complete

6 5.00 335.91 Thirty Five and Ninety Cmt

as directed in toilet and bath sunken area at all floor up to all lead and

One Paisas Only

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand

Rupees Two Thousand

: 8- hand broken stone aggregates 40 mm nominal size) and curing

Seven Hundred Sixty

7 190.00 complete excluding cost of formwork in (A) Foundation and Plinth 2769.69 Cmt

Nine and Sixty Nine

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand Rupees Three

: 4- graded stone aggregates 20 mm nominal size) and curing Thousand Seven

8 2.00 complete excluding cost of formwork in (A) Foundation and Plinth 3757.61 Hundred Fifty Seven Cmt

and Sixty One Paisas

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including Rupees Seventy Seven

9 54495.00 bending, binding and placing in position complete upto all floor level 77.29 and Twenty Nine Paisas Kg

Providing throating or plaster drip and moulding to R.C.C. Chhajja. Rupees Forty Three and

Five Paisas Only

Providing and laying controlled cement concrete M 250 and curing

Rupees Four Thousand

complete including the cost of formwork but excluding the cost of

Six Hundred Twenty

11 121.00 reinforcement for R.C.C work in foundation footing base. 4623.48 Cmt

Three and Forty Eight

Providing and laying controlled cement concrete M 250 and curing Rupees Seven

complete including the cost of formwork but excluding the cost of Thousand Six Hundred

reinforcement for R.C.C work in Column for all floor. Eighty One and Fifteen

Providing and laying controlled cement concrete M.250 and curing Rupees Six Thousand

complete including the cost of formwork but excluding the cost of Two Hundred Eighty

reinforcement for R.C.C work for vertical Walls from top of foundation One and Sixty Nine

level upto floor two level (upto 10 ton) Paisas Only

Providing and laying controlled cement concrete M 200 and curing

Rupees Nine Thousand

complete including the cost of formwork but excluding the cost of

14 5.00 9641.15 Six Hundred Forty One Cmt

reinforcement for R.C.C work in RCC Stair for All Floor.

and Fifteen Paisas Only

Providing and laying controlled cement concrete M 250 and curing

Rupees Five Thousand

complete including the cost of formwork but excluding the cost of

15 40.00 5999.00 Nine Hundred Ninety Cmt

reinforcement for R.C.C work in Ground Beam.

Providing and laying controlled cement concrete M 250 and curing Rupees Five Thousand

complete including the cost of formwork but excluding the cost of Seven Hundred Eighty

reinforcement for R.C.C work in RCC Copping for all floor. Four and Seven Paisas

Providing and laying controlled cement concrete M 250 and curing Rupees Six Thousand

complete including the cost of formwork but excluding the cost of Nine Hundred Eighty

reinforcement for R.C.C work in RCC Slab for all floor. Four and Fifteen Paisas

Providing and laying controlled cement concrete M 250 and curing Rupees Six Thousand

complete including the cost of formwork but excluding the cost of Two Hundred Twenty

reinforcement for R.C.C work in Slab Beam for all Floors.. Seven and Thirty Six

Providing and laying controlled cement concrete M 250 and curing Rupees Seven

complete including the cost of formwork but excluding the cost of Thousand Five Hundred

reinforcement for R.C.C work in RCC Lintel,Chhajja,Beam for all floor. Ninety Seven and Two

Brick work using common burnt clay building bricks having crushing Rupees Four Thousand

20 91.00 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement 4214.33 Two Hundred Fourteen Cmt

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional and Thirty Three Paisas

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Rupees Four Thousand

21 86.00 Mortar 1:6 (1- Cement : 6 -fine sand) in super structure above plinth 4496.05 Four Hundred Ninety Cmt

level upto floor two level (conventional ) (A) Ground Floor. Six and Five Paisas Only

Brick work using common burnt clay conventional building bricks for

Rupees Four Thousand

super structure having crushing strength not less than 35 Kg./Sq.Cm. in

Five Hundred Thirty

22 85.00 cement mortar 1:6 (1 cement : 6 fine sand) in super structure above 4537.03 Cmt

Seven and Three Paisas

plinth level upto floor two level (conventional ) (B) First Floor.

Brick work using common burnt clay conventional building bricks for

Rupees Four Thousand

super structure having crushing strength not less than 35 Kg./Sq.Cm. in

Two Hundred Fifty Five

23 11.00 cement mortar 1:6 (1 cement : 6 fine sand) in super structure above 4255.31 Cmt

and Thirty One Paisas

plinth level upto floor two level (conventional ) (B) Second Floor.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Rupees Six Hundred

24 147.00 Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional 684.26 Eighty Four and Twenty Smt

(upto 10 ton) in super structure above plinth level upto floor two level Six Paisas Only

(conventional) (A) Ground Floor

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Rupees Six Hundred

25 115.00 Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional 684.26 Eighty Four and Twenty Smt

(upto 10 ton) in super structure above plinth level upto floor two level Six Paisas Only

(conventional) (A) First Floor

Providing & fixing 35 mm thick Single shutter flush door solid core

finished with both side 1 mm thick laminationboth side like 'NOVAPAN

'or equivalent, of natural wood grain shade as approved by this office

26 70.00 having telephone blackgranite 18 mm thick frame with double stone 8406.07 Smt

Hundred Six and Seven

including fixed ventilation above lintle level as per drg and as per

theinstruction of Engineer in charge.with necessary SS hinges and

fixtures etc . complete.

Providing and fixing standared extruded of alluminium section of size

Rupees One Thousand

63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized

27 19.00 1525.00 Five Hundred Twenty Smt

alluminium frame with 5 mm thick transparent bronze colour tinted

float glass as details etc complete for Fix window.

Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

0.738 Kg/mt, horizontal Three track member size 92mm x 31.75mm x

1.30mm @ Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x

Rupees Six Thousand

1.50mm ,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

Two Hundred Eighty Six

28 19.00 size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of 6286.45 Smt

and Forty Five Paisas

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

Providing and fixing Louverd type ventilators with powder coated Rupees Ten Thousand

aluminum fittings and fixtures and Blur glass fixing to Adjustable One Hundred Ninety

louverds and black granite frame as per details and executed as per Three and Thirty Six

directed by Engineer Incharge. Paisas Only

Providing and fixing M.S. Grill of required pattern for Window grill with

Rupees One Hundred

M.S pipe/Angle/flat at required spacings and frame alround gate with

30 2035.00 112.72 Twelve and Seventy Two Kg

one coat of applying oil based priming coat and painting two coat of oil

paints on gate etc. complete.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead

Rupees Nine Thousand

paint. (A)In beams and joists, channels angles Tees, flats, with

31 3.00 9108.48 One Hundred Eight and Qntl

connecting plates or angle cleats as in main and cross beams. Hip and

Forty Eight Paisas Only

jack rafters, purlins conneted to common rafters and the like.

Providing and fixing bright finish ISI hydraulic Door closers PIU

Rupees Nine Hundred

approved brand list as approved model and make with necessary

32 6.00 986.23 Eighty Six and Twenty Each

screws and finishing etc. complete as directed by Engineer in charge.

Three Paisas Only

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

Rupees Three Hundred

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

33 71.00 369.13 Sixty Nine and Thirteen Smt

layer and finished with a floating coat of neat cement. (B) 50mm thick.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' Rupees One Thousand

in flooring treads of steps and landing laid on a bed of 12mm thick One Hundred Twenty

cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with and Thirty Six Paisas

flush pointing in white cement. Only

Providing and Laying Tectile Flooring For Desable Person of Size

Rupees Two Thousand

300mmx300mm Size as per Manufacturer of Aproved Make in All

One Hundred Eighty

35 42.00 Colour & Shade Laid on 20 mm Thick base Coat CM 1:3 as per 2188.33 Smt

Eight and Thirty Three

Requiment and instructed by engineer incharge.

Providing and laying mirror polished hand dressed Kota stone slab

flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

Rupees One Thousand

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

36 121.00 1019.39 Nineteen and Thirty Smt

laid over and jointed with grey cement slurry mixed with pigment to

Nine Paisas Only

match the shade of slab including rubbing and polishing etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

Rupees Nine Hundred

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement :

37 33.00 997.16 Ninety Seven and Smt

3-coarse sand ) finishing with flush pointing in white cement.

Sixteen Paisas Only

Providing and laying coloured glazed tiles of the size 300 mm x

Rupees One Thousand

mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

Four Hundred Eighty

38 632.00 cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white 1488.24 Smt

Eight and Twenty Four

Providing and laying mirror polished kota stone slab 25mm thick in

Rupees One Thousand

risers of steps,skirting Dedo and pillars laid on 10mm thick cement

One Hundred Eighty

39 58.00 mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement 1184.24 Smt

Four and Twenty Four

slury mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete.

Providing and laying Exterior grade pavit/paver tile pavement colour

and pattern as per architectural drawing in flooring treads of steps and Rupees One Thousand

40 8.00 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 1680.29 Six Hundred Eighty and Smt

coarse sand ) finishing with flush pointing in white cement etc. Twenty Nine Paisas Only

Providing and laying Mirror polished Machine polished Granite stone

slab 18mm (Average) thick for Door / Windows cill & Jams Clading as Rupees Three

per design incl. full moulded round front edge in rade of steps laid on Thousand Six Hundred

20 mm thick cement mortar 1 : 6 (1 cement : 6 coarse sand) jointed with Ninety Three and Fifty

grey cement slurry including ubbing and polishing etc. complete For Seven Paisas Only

Door / Windows cill & Jams Clading

Providing and laying sandwich type kitchen platform of size 60 cm x

cm and respected length with dhar polish or moulding having base 2" Rupees Nineteen

and spport & base with marble or Kota as per site requirement and top Thousand Two

with selected shed of marble or granite with gas pipe provision and sink Hundred Ninety Five

including all material nad labour also executed as per directed by and Eleven Paisas Only

engineer incharge.

Providing and fixing 25 mm thick mirror polished on both faces kota

stone slab front edge machine cut polished in shelves below platform,

Rupees One Thousand

in store or in cupboards at all floors and all levels jointed with gray

43 5.00 1109.07 One Hundred Nine and Smt

cement slurry including making chases in wall and making good by

Seven Paisas Only

filling with cement mortar 1:2(1 Cement : 2 sand) completed as directed

by the Engineer in charge.

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring Rupees Seven

44 230.00 mortar creme out upto surface using white cement including 779.70 Hundred Seventy Nine Smt

rounding off junctions and extending them upto 15 cm along the and Seventy Paisas Only

wall,clearing with water and oxalic acid etc. as directed.

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing Rupees Four Thousand

complete excluding cost of formwork and reinforcement for reinforced One Hundred Forty Two

concrete work in (B) Slabs, landing, shelves, Balconis , Lintels, Beams, and Twenty Four Paisas

Girders and Cantilever upto floor two level. Only

Providing & Fixing the Chicken wire mesh Jali 16 x24 or approved size

22 gauge applying between the RCC and masonry junction in proper Rupees Three Hundred

46 145.00 line, level and plumb with all material, labour, tools, tackles and 359.52 Fifty Nine and Fifty Two Smt

equipment including fixing the jali with nails, etc complete as directed Paisas Only

by the Engineer-in-charge.

Providing 10 mm thick Mala cement plaster on ceiling and soffits of

Rupees One Hundred

stairs upto floor two level, in cement mortar (1:3) (1 cement : 3 sand) &

47 252.00 177.72 Seventy Seven and Smt

finished even and smooth (i) Ground Floor

Seventy Two Paisas Only

Providing 10 mm thick Mala cement plaster on ceiling and soffits of Rupees Two Hundred

48 168.00 stairs upto floor two level, in cement mortar (1:3) (1 cement : 3 sand) & 228.34 Twenty Eight and Thirty Smt

finished even and smooth (i) First Floor Four Paisas Only

Providing 10 mm thick Mala cement plaster on ceiling and soffits of Rupees Two Hundred

49 46.00 stairs upto floor two level, in cement mortar (1:3) (1 cement : 3 sand) & 278.96 Seventy Eight and Smt

finished even and smooth (i) Second Floor Ninety Six Paisas Only

Providing 15mm thick cement plaster in single coat on Rough

Rupees One Hundred

(Similar)side of single or half brick walls for interior plastering upto

50 871.00 182.06 Eighty Two and Six Smt

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Ground Floor

Providing 15mm thick cement plaster in single coat on Rough

Rupees Two Hundred

(Similar)side of single or half brick walls for interior plastering upto

51 498.00 205.96 Five and Ninety Six Smt

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) First Floor

Providing 15mm thick cement plaster in single coat on Rough

Rupees Two Hundred

(Similar)side of single or half brick walls for interior plastering upto

52 72.00 229.86 Twenty Nine and Eighty Smt

floor two level and finished even and smooth in (ii) Cement mortar 1:4

Six Paisas Only

(1-cement :4-sand) Second Floor

20mm thick sand faced cement plaster (Gutaka) on walls upto height

Rupees Three Hundred

metres above ground level consisting of 12mm thick backing coat of

53 932.00 352.44 Fifty Two and Forty Four Smt

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of

12 mm thick cement plaster in cement mortar (1 Cement : 4 Rupees Two Hundred

54 54.00 coarse sand) in rough finishing and 8 mm thick top coat of cement 283.95 Eighty Three and Ninety Smt

mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including Five Paisas Only

scaffolding curing etc. complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement Rupees Twenty Four

55 57.00 mortar 1:1 including neat cement finishing, watering etc. complete. 24.28 and Twenty Eight Paisas Rmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth & Applying two Rupees One Hundred

56 1123.00 coats of Birla or Asian acrylic lappy ( putty) and two coats of primer of 123.44 Twenty Three and Forty Smt

approved brand and manufacture on new wall surface to give an even Four Paisas Only

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

Rupees One Hundred

surface (two coats) to give an required shape even shade after

57 994.00 120.26 Twenty and Twenty Six Smt

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

Painting Two coats over & including a priming coat on new steel and

Rupees One Hundred

other metal surfaces with enamel paint, brushing interior to give an

58 65.00 105.49 Five and Forty Nine Smt

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

Painting Two coats (excluding priming coat) on new steel and other

metal surfaces with enamel paint, brushing interior to give an even Rupees Ninety Two and

shade including cleaning the surface of all dirt, dust and other foreign Twenty Paisas Only

Applying general insecticide pest control treatment to floors, cupboards

etc including labour material etc. complete. Using Heptachloride 20 EC.

As Per 6113_pests Consentration Weight 0.50 percent is recommended

Rupees Ninety One and

60 230.00 one litre chemical emulsion dillute with 39 liter of water will give. Total 91.63 Smt

Sixty Three Paisas Only

dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the following outside Dia. Low densidy, Rupees One Hundred

61 20.00 complete with special falnge compression type fittings, wall clipsetc. 131.96 Thirty One and Ninety Rmt

including making good the wall ceiling and floor.(D) 40mm Six Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy, Rupees Two Hundred

62 33.00 complete with special falnge compression type fittings, wall clipsetc. 280.54 Eighty and Fifty Four Rmt

including making good the wall ceiling and floor.(F) 75mm Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the following outside Dia. Low densidy, Rupees Three Hundred

63 60.00 complete with special falnge compression type fittings, wall clipsetc. 339.05 Thirty Nine and Five Rmt

including making good the wall ceiling and floor.(G)110 mm Paisas Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

Rupees Five Hundred

diameter with jali of the following nominal diameter of self cleansing

64 14.00 574.58 Seventy Four and Fifty Each

design with C.I scread down or hinged grating including the cost of

Eight Paisas Only

cutting and making good the walls.

Providing and fixing white or coloured glazed china vitreous Orissa type

Water closet as per PIU Approved brand list of size 580 mm x 440 mm

Rupees One Thousand

including providing and fixing vitreous china 100 mm size 'P' or 'S' trap

65 2.00 1945.60 Nine Hundred Forty Five Each

including jointing the trap with pan and soil pipe in CM (1:1) (1 cement

and Sixty Paisas Only

:1 fine sand) etc complete as directed by Engineer in charge.

Providing and fixing flat back wash basin 550 mm x 400 mm size of

first grade, white in colour with single hole for pillar trap with CI or MS

brackets painted with including cutting holes and making good the

same including providng and fixing CP brass waste coupline 32mm dia Rupees Two Thousand

66 6.00 & waste pipe , including providng and fixing 15mm dia pillar tap 2109.11 One Hundred Nine and Each

capsten head screw down high pressure with screws, shanks and back Eleven Paisas Only

nuts,including providing and fixing waste pipe 15mm x 600 mm pvc

inlet connection 15mm brass screw down stop tap with necessary

fititngs etc. complete

Providing and fixing corner type wash basin 350mm x 350mm mm size

of first grade, white in colour with single hole for pillar trap with CI or

MS brackets painted with including cutting holes and making good the

Rupees One Thousand

same including providng and fixing CP brass waste coupline 32mm dia

Seven Hundred Thirty

67 4.00 & waste pipe , including providng and fixing 15mm dia pillar tap 1738.45 Each

Eight and Forty Five

capsten head screw down high pressure with screws, shanks and back

nuts,including providing and fixing waste pipe 15mm x 600 mm pvc

inlet connection 15mm brass screw down stop tap with necessary

fititngs etc. complete

Providing and fixing vitreous china laboratory sink 600 mm X 450 mm x

150 mm sized PIU approved quality with CI or MS brackets painted Rupees Two Thousand

white including cutting holes and making good the same including Four Hundred Eighty

providing and fixing 32 mm dia CP waste coupling rails providing fixing Seven and Forty Nine

PVC waste pipe etc. comp as approved by the Engineer in charge. Paisas Only

Providing and fixing white vitreous china extended wall mounted water

closet (European type) of size CALIBRE 660 x 360 x 760 mm with Top

Rupees Ten Thousand

Toilet Seat cover with Cistern & Jet Spray as per PIU Approved brand

Five Hundred Thirty Five

69 9.00 list including providing and fixing vitreous china 100 mm size 'P' or 'S' 10535.27 Each

and Twenty Seven

trap including all jointing the trap with pan and soil pipe in CM (1:1) (1

cement :1 fine sand) etc complete as directed by Engineer in charge.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior

Rupees Eight Hundred

glass with mounted on 6mm thick A.C sheet or plywood sheet and fixed

70 10.00 859.41 Fifty Nine and Forty Each

to wooden plugs with C.P brass screws and washers.

One Paisas Only

Providing & fixing C.P. Brass towel rails complete with C.P. brass Rupees Six Hundred

71 10.00 brackets fixed to wooden plugs with C.P. brass screws (B) 600 mm x 20 616.42 Sixteen and Forty Two Each

mm size Paisas Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

Rupees Seventy Two

In Charge. Pipe shall be fixed on the wall with the help of clamp at

72 90.00 72.65 and Sixty Five Paisas Rmt

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at Rupees Ninety One and

every two Rmt C/C or shall be concelled as directed including necessary Eighty Four Paisas Only

fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

Rupees One Hundred

In Charge. Pipe shall be fixed on the wall with the help of clamp at

74 65.00 148.12 Forty Eight and Twelve Rmt

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Rupees One Hundred

75 20.00 potable water of following dia. nominal bore tube fittings and clamps 170.36 Seventy and Thirty Six Rmt

including making good the wall, ceiling and floor etc. complete.[A] 15 Paisas Only

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet. Rupees Two Hundred

76 2.00 (A) 100mm dia. Each 282.16 Eighty Two and Sixteen Each

Providing and fixing screw down bib taps of following size.(B) Brass Rupees One Hundred

77 16.00 chromium plated screws down Bib Tap. (i) 15mm dia. 186.83 Eighty Six and Eighty Each

Three Paisas Only

Providing and fixing 25mm size UPVC Ball Valve as per PIU Approved Rupees Five Hundred

78 10.00 brand list with necessary Adhesive and fittings as directed by engineer 549.68 Forty Nine and Sixty Each

incharge. Eight Paisas Only

Providing and fixing 40 mm size UPVC Ball Valve as per PIU Approved

Rupees One Thousand

brand list with necessary Adhesive and fittings as directed by Engineer

Three Hundred Forty

79 4.00 incharge. 1345.71 Each

Five and Seventy One

Providing and fixing chromium plated brass half turn flush cock of

Rupees Two Hundred

approved quality including fixing in pipe line etc. complete (ii) 25 mm

80 15.00 263.77 Sixty Three and Seventy Each

Seven Paisas Only

Providing and fixing brass cromium plated surgical handle cock of size

Rupees One Thousand

of 15mm dia as per PIU Approved brand list etc. complete as directed

81 3.00 1088.21 Eighty Eight and Twenty Each

by Engineer in charge.

One Paisas Only

Making connection of galvanised Mild steel distribution branch with

Rupees Nine Hundred

galvanised mild steel main 50mm to 80mm nominal bore by providing

82 1.00 932.02 Thirty Two and Two Each

and fixing tee including cutting and threading the pipes complete.

Providing erecting and fixing double coated ISI water tank of required

Rupees Three and

83 5000.00 capacity each with all necessary fittings and connection etc. complete 3.95 Liter

Ninety Five Paisas Only

Constructing Brick masonry road gully chamber 500mm x 450mm x

Rupees Two Thousand

600mm including 500mm x 450mm C.I. horizontal grating wih frame

84 10.00 2017.19 Seventeen and Nineteen Each

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using Rupees Eight Hundred

85 65.00 of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm 876.90 Seventy Six and Ninety Rmt

heigh at every 2000 mm center to center or shall be concealed in walls Paisas Only

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using Rupees Eight Hundred

86 80.00 of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm 834.48 Thirty Four and Forty Rmt

heigh at every 2000 mm center to center or shall be concealed in walls Eight Paisas Only

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

Rupees Two Thousand

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

Nine Hundred Thirty

87 10.00 slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 2932.93 Each

Two and Ninety Three

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Extra over items 24.44(73) for every additional depth of 0.1M. of part Rupees Two Hundred

88 6.00 thereof beyond 450mm depth for Brick masonry chamber.(i) for 242.39 Forty Two and Thirty Each

455mm x 610mm size. Nine Paisas Only

Construction of Septic Tank as per given drawing including inside clear

dimension 2.46 x 1.36 x 1.00 m including excavation, C.C. 1:5:10, brick

work in C:M. 1:6, Half brick work in C:M 1:3, plaster in C:M. 1:3 & Rupees Twenty Seven

finishing with floating coat of neat cement slurry I.P.S. 50 mm thick Thousand One

R.C.C. slab 10 cm. thick, H.Y.S.D. bar reinforcement, three C.I. pipe 75 Hundred Fifty and Forty

mm dia. with cowel vent including trench filling by three C.I. Manhole Nine Paisas Only

cover, sand, spreading excavated earth, C.I. step, including all cost of

materials and labour.

Construction Of Sock pit having internal diameter 1.50 Mtr. And

Mtr. Depth, with surrounding 3.00 Mtr. height honey comb mesonry

rest above 1.50 Mtr height brick masonry in C:M. 1:6 including

Rupees Twenty Four

providing R.C.C. slab 10cm thick with R.C.C. beam and providing C.I.

90 2.00 manhole cover 60 x 45 cm and C.I. pipe 75mm dia. 1.8M long with cowl 24318.75 Each

Hundred Eighteen and

vent also providing 15mm thick cement plaster in C:M. 1:3 and finishing

Seventy Five Paisas Only

with a floating coat in neat cement slurry and filling on outer

surrounding and spreading excavented earth as per drawing given.

Providing and fixing 3 mm thick 45 cm x 15 cm in size approved

coloured Acrylic sheets as signage and display of health

Rupees Two Hundred

signs/information of required size having retro reflective letters/design

91 30.00 247.79 Forty Seven and Seventy Each

as per requirement with all material, labour, tools, tackles and

Nine Paisas Only

equipment including fixing with nails, etc complete as directed by the

Engineer-in-charge.

Fabricating, supplying and fixing in position SS 304 grade railing 0.90m

height for staircase, balconies, ramp etc. with bright finish 40 mm dia

top SS pipe and 25 mm pipe Balusters @ spacing 1.00 m C/C & 15 mm Rupees Seven

92 273.00 Horizontal 0.23 m C/C as per approved design including cutting, 780.12 Hundred Eighty and Kg

bending, welding, fixing etc. comp at any height, floor and level Twelve Paisas Only

including polishing etc as per direction of Engineer in charge. (Only

linear Centre Length will be paid for payment)

Providing and fixing bright finish One mm thick Stainless steel (Grade

Rupees One Thousand

304) letters size 30 cm height in Gujarati language fixed in wall with

Two Hundred Twenty

93 25.00 screws and nails and any height including scaffolding etc complete as 1226.54 Each

Six and Fifty Four Paisas

per instruction of Engineer-in-charge.

Clearing and grubbing road land including uprooting rank vegetation,

Rupees One Thousand

grass bushes, shrubs, saplings and trees girth up to 300 mm removal of

Two Hundred Twenty

94 0.10 stumps of tress cut earlier and disposal of unserviceable materials.(A) By 1226.54 Hector

Six and Fifty Four Paisas

Manual means in area of light jungle.

Providing and fixing 3mm thick( 10 gauge ) high finish with 25 mm X

25mm maximum spacing MS Jali as per approved pattern including Rupees Nine Hundred

95 28.00 cutting, bending, welding, fixing with Steel work and etc. complete as 901.09 One and Nine Paisas smt

directed by Engineer in charge.(Cost of Steel work shall be paid in basic Only

fire Extinguishers

Providing & fixing of ABC Type Fire Extinguisher Cap. 6 kg Filled with

Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored

Pressure Type, UGTS Pressure Gauge, Gross Weight 8.9 Kg, Empty

Weight 2.9 Kg, Can Height 530 mm, Diameter 150 ± 10mm, Discharge

Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Rupees Two Thousand

96 5.00 Average Discharge is 90%, applicable on Class A,B & C and electrically 2018.59 Eighteen and Fifty Nine Nos

started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Paisas Only

Mig welded, EPDM Rubber Hose with both end Aluminum clamped,

Internal Coating - Epoxy Powder coating, External Coating - Pure

Polyester Powder coating (UV Resistant), Brass forged valves with safety

Pin is of SS material, Sheet metal thickness : 1.8 mm, ISI Approved IS

Providing and fixing, of 4.5 kg CO2 High Pressure Portable Fire

Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4,

empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter

Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Rupees Five Thousand

Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Four Hundred

Internal coating is not applicable & External coating is of enamel spray Seventeen and Seventy

painting, Powder Coated Handle, Squeeze Grip type Valve Confirm to IS Seven Paisas Only

3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless

pipes & bearing ISI mark, Body confirms to IS 7285 and PESO

APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Dismentalling doors, windows, ventilators etc (wood of steel) shutters

Rupees One Hundred

including chowkhats, architraves, holdfasts and other attachment etc,

98 26.00 192.09 Ninety Two and Nine Nos

complete and stacking them within all lead and lift. (i) Not exceeding

Demolition of Brick work and stone masonry including stacking of Rupees Five Hundred

99 162.00 serviceable materilas and disposal of unserviceable materials with all 562.89 Sixty Two and Eighty Cmt

lead and lift.(ii) In Cement Mortar. Nine Paisas Only

Demolition including stacking of serviceable materilas and disposal of

Rupees One Thousand

unserviceable materials with all lead and lift. (i) R.C.C. work

100 68.00 1082.35 Eighty Two and Thirty Cmt

Five Paisas Only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

101 1080.00 706.93 Hundred Six and Ninety Smt

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

Three Paisas Only

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade Rupees Three Hundred

102 200.00 concret as per approved design and including excavation for fixing in 374.92 Seventy Four and Rmt

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) Ninety Two Paisas Only

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of following type, Rupees Four Hundred

103 100.00 erected on PVC / Metallic box, single mounting base frame covered 485.81 Eighty Five and Eighty Pt.

with textured/metallic front plate modules erected on / in wall / ceiling One Paisas Only

as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. cat III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

Rupees Six Hundred

104 35.00 regulator with separately mounted and accessories with earth Pt.

674.68 Seventy Four and Sixty

continuity of following type erected on PVC / Metallic box, single

Eight Paisas Only

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. cat III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

Rupees Five Hundred

erected on PVC / Metallic box covered with appropriate front plate

105 15.00 510.05 Ten and Five Paisas Pt.

modules erected on / in wall / ceiling as per pipe erected with following

type of accessories (a) with medium class Rigid PVC pipe and

accessories cat III[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III.

[ii] 16 A plug with 2-2.5 sq.mm cu. Wire(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat-III.

106 20.00 745.38 Hundred Forty Five and Pt.

Thirty Eight Paisas Only

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Rupees Two Hundred

socket erected on PVC / Metallic box, single mounting base frame

107 35.00 257.55 Fifty Seven and Fifty Pt.

covered with textured / metallic front plate modules erected on / in

Five Paisas Only

wall / ceiling with following type accessories cat III

(7) Blank Plate Single Rupees Twenty Five

108 15.00 25.25 and Twenty Five Paisas Ea.

Providing following type of Modular Type Accessories mounted on PVC

Rupees One Hundred

/ Metallic box covered with appropriate front plate modules erected

109 5.00 160.59 Sixty and Fifty Nine Nos.

with necessary connection. As desire by Engineerincharge. (3) Two

Pin/RJ-11 Telephone Socket.[A] For One Gang Cat-III

(8) Modem Jack for Computer Open RJ-45 Rupees One Hundred

110 5.00 160.59 Sixty and Fifty Nine Nos.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with Rupees Twenty Four

111 130.00 necessary PVC fittings & Junction boxes fixed with adhesive solution & 24.24 and Twenty Four Paisas Mtr.

Clamps with following diameter of pipes, in approved manner as Only

directed(a) 20 mm

Providing & erecting PVC Corrugated Flexible Conduit with required Rupees Twenty One

112 15.00 nos. of coupling, PVC bushes, Check-nuts etc. complete of following 21.21 and Twenty One Paisas Mtr.

sizes.(2) 25 mm Only

(A) Supplying and laying UPVC cable trunking system comprising

Rupees Two Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & flame

113 10.00 277.75 Seventy Seven and mtr

proof confirming BS .All necessary accessories and measuring of

Seventy Five Paisas Only

following sizes.(1) 75 mm x 50 mm trunking

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor Rupees Sixty Two and

FRLS PVC insulated stranded wire of green color for earth continuity of Sixty Two Paisas Only

following size (a) with medium class Rigid PVC pipe and accessories(a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor Rupees Eighty Two and

FRLS PVC insulated stranded wire of green color for earth continuity of Eighty Two Paisas Only

following size. (a) with medium class Rigid PVC pipe and accessories (b)

2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

Rupees One Hundred

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

116 150.00 112.11 Twelve and Eleven Mtr.

stranded wire of green color for earth continuity of following size. (a)

with medium class Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm

h) 4 wire 6 sq. mm. Rupees Two Hundred

117 110.00 260.58 Sixty and Fifty Eight Mtr.

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm )

Rupees Four Hundred

118 30.00 425.21 Twenty Five and Twenty Mtr.

One Paisas Only

Supplying & erecting Delton or approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two pairs, &

wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Rupees Twenty and

119 135.00 Jacket suitable for telephone wiring & confirming to C-DOT erected in 20.20 Mtr.

Twenty Paisas Only

existing pipe. of following size of conductors & nos.of pairs. With

necessary connections. [A] Conductor Size 0.5 mm. (a) Unarmoured (2)

Supplying & erecting approved make LAN cable of following size in Rupees Forty Seven

120 145.00 existing pipe as per direction[C] CAT - 6 47.47 and Forty Seven Paisas Mtr.

Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC / Metal Rupees One Thousand

board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as One Hundred Thirty

directed. [B] For Modular Type Accessories. CAT.III 1 no. 6A/16A Three and Twenty Two

universal plug-switch combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug Paisas Only

Bakelite adopter for Holder to be erected Rupees Nine and Nine

Decorative call bell Ting-tong box type 250 volts complete erected Rupees Seventy One

123 3.00 71.71 and Seventy One Paisas Ea.

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, Rupees Three Hundred

124 70.00 CCT 3000 K to 6500K, 373.70 Seventy Three and Ea.

Luminaire efficacy> 85 lumens/watt ,LED Seventy Paisas Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Tube Light with integral driver(iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet.Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

Rupees One Hundred

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

125 15.00 112.11 Twelve and Eleven Ea.

E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

(ii) 5 to 8 watts Cat-III

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD Rupees Three

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire Thousand Three

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings Hundred Forty Five and

required LM-79 & LM-80 certificates)(NOTE: Below description have Twelve Paisas Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (i) above 36 to

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged Rupees Four Hundred

127 9.00 doors as per requirement having locking arrangements with mounting 476.72 Seventy Six and Seventy Ea.

clamp with nuts, bolts & washers suitable for erection on pole with Two Paisas Only

cable clamps& earth bolt of following size of box.( c)150mm x 125mm x

Supplying and erecting B class Galvanized iron pipe having smooth

Rupees Two Hundred

finished bore of the pipe on both ends erected nuts and bolts along

128 9.00 215.13 Fifteen and Thirteen Mtr.

the pole / wall shaping the pipe as per site requirement. Pipe dia as

following.(b) 32 mm dia

B' class galvanised iron pipe 32 mm outside dia 45 cms long duly

Rupees Three Hundred

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on

129 9.00 343.40 Forty Three and Forty Ea.

wall or corner for mounting street light luminaire with necessary

hardware materials duly painted.

Making trench in soft soil of suitable width of 90 cms deep for laying

Rupees Fifty Five and

130 110.00 cable or locating the fault all over the run and backfilling the same and 55.55 mtr

Fifty Five Paisas Only

making the surface as normal ground.

Providing & erecting High Voltage Danger Notice Board sticker of

Rupees Thirty Five and

131 2.00 standard size 35.35 Ea.

Thirty Five Paisas Only

Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G. Rupees Seven

Hundred Ninety Four

and Eighty Seven Paisas

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty Rupees Four Thousand

cover.(approved make OEM has to submit test certificate) & having Five Hundred Ninety

back filling compound of (B) Inner chemical (CCM Compound)- One and Forty Six Paisas

Resistivity:- 0.2 meter testing as per IEC 62561-2017, Voltage drop:- Only

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted. .

(a) For Electrical Installation up to 440V in normal soil

ugh Neckrest connector Neckrest assembly has height adjustment of4.2

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

Rupees One Hundred

134 30.00 1.1 KV grade to be erected as directed of following size. (A) 2 core 2.5 101.00 Ea.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

Rupees One Hundred

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

135 180.00 126.25 Twenty Six and Twenty mtr

necessary clamps or in existing trench / pipe of following size of cables

Five Paisas Only

(b) 4 core 6 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & Rupees Six and Six

connected to switchgear terminals with brass/cadmium plated nut bolts Paisas Only

in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite Rupees Ten Thousand

control fuses/MCB for measuring instruments, earth bus & earth bolts, Four Hundred Sixty

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, Eight and Sixty Five

handles with locking arrangement and rubber gasket,heavy duty end Paisas Only

terminal connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder cugh

Neckrest connector Neckrest assembly has height adjustment of4.2 ±

0.5 cm and rotation adjustment of overall76°+ 2°. The complete

neckrest assembly is retro fit to the main chair.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.justment.• 4-position locking

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current / cross

Rupees Six Hundred

section area) duly wrapped with colour insulating tape for phase

138 4.00 660.54 Sixty and Fifty Four Rn.Mtr

sequence of following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each busbar,erected

in existing cubical panel with necessary connections.(A) Suitable for

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating Rupees Six Thousand

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to One Hundred Seventy

work on A.C. supply 50 c/s. with all internal connections & complete Three and Twelve Paisas

erected in existing 16 G.M.S. housing. ICS=100% ICU only CAT III Only

Supplying & erecting approved make Four Pole 415V change over Rupees Seven

switch interior for panel mounting with operating mechanism A.C.23 Thousand Seven

duty confirming to IS for (C)100-125ACat-lll Hundred Ninety and

Thirteen Paisas Only

Providing and fixing 4 mm thick ground glass (Frosted or obscured on

one side) & (PIU approved brand list) fix in aluminium door, window,

ventilator shutters and partitions any size, any shape etc. P & F with Rupees One Thousand

EPDM/ PVC rubber gasket etc all complete at all floors/all levels/all Seven Hundred Thirty

heights as per the architectural drawings and the directions of Engineer- Eight and Twenty One

in-Charge. Actual laying installed glass shall be measured (Cost of Paisas Only

aluminium snap beading shall be paid in basic item)

Supplying and erecting 19/20 mm normal bore Medium Calss M. S. Rupees One Hundred

142 32.00 Pipe down rod erected duly painted for fan complete with necessary 108.07 Eight and Seven Paisas Ea.

24/0.2 flat 3 Core flexible wire with earthing. Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

Rupees One Hundred

to the RCC bars up to 50mm length each side and pierced through a

143 32.00 108.07 Eight and Seven Paisas Ea.

16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed

in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Rupees Eighteen and

Fan box. Eighteen Paisas Only

Supplying & erecting approved make low noise decorative exhaust fan

Rupees One Thousand

having size 200mm with 1350 RPM with square frame ABS body with

Seven Hundred Three

145 9.00 inbuilt lowers & square frame. 1703.87 Ea.

and Eighty Seven Paisas

Providing recess in wall or window frame suitable for erection of

Rupees One Hundred

Exhuast fan complete with plastering and color washing to match the

146 9.00 189.88 Eighty Nine and Eighty Ea.

color of the wall or window complete with expanded metal in order to

Eight Paisas Only

render the fitting in accessible and the room water-proof.

Mains with ISI marked, 1.5 KV grade electrolyte stranded, annealed

copper conductor with 105 C heat resistant PVC insulated conforms to

IS 694, IEC-227 erected in existing pipe of following size (Specifically for Rupees Fifty Six and

control panel, relays, power switchgears, motor starters & control Fifty Six Paisas Only

wiring) with required size of copper lugs, nuts and bolts if required.e)

One wire 6.00 sq. mm

f) One wire 10.00 sq. mm

Rupees Ninety One and

Ninety One Paisas Only

Supplying and erecting approved make Digital multi Fuction paramater

Rupees Five Thousand

for measures and display, V, A, Hz, Kw, PF, kva, kwh, Run HRS with Rs-

149 1.00 5454.00 Four Hundred Fifty Four Ea.

485 with all connection wiring etc. with manufactures calibration

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The

outlet temp. of the water should drop by 150C within a hour, The water Rupees Fifty Five

cooler should be comprising of hermetically sealed compressor, fan Thousand Eight

motor, condensing unit, water tank surrounded by evaporating, coil, Hundred Ninety Three

thermostats, relay etc.complete with necessary inlet & outlet and Forty Paisas Only

connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump Rupees Fifteen

capacity 80 psi, mention with 40 psi inline type post carbon filter auto Thousand Six Hundred

low & high pressure switches with following size of storage tank & LPH Twenty and Sixty Six

capacity & erected as directed with one year comprehensive Paisas Only

maintenance guarantee.[B] 25 Ltr / Hr with 30 Ltr.

Supplying and erecting horizontal / vertical mounting type storage

water heater with copper container housed in M.S./S.S. body insulated Rupees Eight

with glass wool / puff complete with heating elements,adjustable Thousand Three

152 1.00 thermostats 300 c to 850 C, indicating lamp, safety valve, fusible plug, 8373.91 Hundred Seventy Three Ea

etc.complete erected with coach bolts, nuts. washers & cementation (A) and Ninety One Paisas

10 Ltr. with 3 KW. heating element Cat.III Only

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

Rupees Two Thousand

MCB to house appropriate nos. of MCBs.(The DBs should be used of

Nine Hundred Thirteen

153 3.00 same company of MCB to be used) suitable for (B) three phase 2913.85 Ea.

and Eighty Five Paisas

incoming and single phase horizontal type outgoing Per phase

isolation type (PPI)(L) Three phase 6 way SS Double door for single

phase outgoing horizontal box (b) sheet steel double door(ii)6 way

Providing & erecting 240 V MCB double pole switch for motor &

Rupees Two Hundred

inductive load (C Curve) having 10 KA breaking capacity & confirms to

154 3.00 299.97 Ninety Nine and Ninety Ea

IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.Cat-

Seven Paisas Only

providing and erecting Miniature circuit breaker single pole 6A to 25A

Rupees One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity

155 40.00 112.11 Twelve and Eleven nos

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load Rupees Seven

156 3.00 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in 737.30 Hundred Thirty Seven nos

existing box having following capacity©63 Amp.Cat.III and Thirty Paisas Only

Plastic enclosure fitted with DIN rail suitable for incorporating One / Rupees Fifty Two and

Two nos. MCB Fifty Two Paisas Only

Approved make ELCBs / RCCBs conforming to IS:12640 and having

sensititvity of 30 m A and Short Circuit with stand capacity of 6KA and Rupees Two Thousand

suitable for operation on single phase 240 V having charectorstic of Two Hundred Thirty Five

quick action & tripping with all advance feature & do not incorporate and Thirteen Paisas

any electronic component for following Max. rating.(II) 40 Amps. DP Only

Providing & erecting open well type horizontal mono block pump set

Rupees Nine Thousand

with stainless steel body having following specification (C) 1 H.P. single

Six Hundred Thirteen

159 2.00 phase open well motor pump set suitable for 185 LPM discharge @ 25 9613.18 nos

and Eighteen Paisas

mtr. head, suitable for 32 mm dia. Delivery pipe with control panel. CAT

Lowering of submersible motor pump set complete with required. Nos.

and size of casing pipes erected by means of proper chain pulley block

& pipe wrenches after checking of threads of each pipe with coupling Rupees Eight Hundred

160 1.00 to take the load of the pump set and pipe assembly filled up with 856.48 Fifty Six and Forty Eight job

water.(d) for open well Horizontal submersible pump set for sump well Paisas Only

Providing and erecting ISI marked PVC insulated PVC Shethed Flat Rupees One Hundred

161 55.00 flexible Submersible copper cable approved make of following size.(b) 104.03 Four and Three Paisas mtr

3 Core x 2.5 Sq. mm. Only

Providing and Supplying of round stool should have of round stool.

Overall dimension should be Diagonal Leg Dia 538 mm H470 min-

655max. Top plate made of SS 304 made sheet with spin section of

thickness 1mm and non corrosive. It has a diameter of 305mm, seat

base made of MS ring and rectangular tube. EN8 Screw having dia of

22 mm is used for height adjustment of the seat base. The round hub

made of MS ERW tube having dia of 38mm and thickness 2 mm. The

Hub is welded with the legs and it accommodate and cover the lead Rupees One Thousand

162 4.00 screw mechanism. The under-structure consist of 4 legs made up of 1565.50 Five Hundred Sixty Five Nos

MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed and Fifty Paisas Only

pipe leg give a round and clean look. All the legs is Provided with

nos of Nylon-6 bush. All metal components are pre treated with zinc

phosphating in 7 tank process and then powder coated with epoxy

polyester powder coating . Safe working load is 135kg .The rate shall

include all materials, hardware, and labour etc. complete as per

instructionugh Neckrest connector

supplying and fixing s.s 304 laboratory stool for hospital used PSP-

1037-SS Stool 14" Square stainless steel 18 gauge contoured seat Rupees Nine Hundred

163 4.00 Stainless steel base with heel rest for added comfort Tubular legs 929.20 Twenty Nine and Nos

fitted with rubber shoes pretreated and power coated. As directed by Twenty Paisas Only

Engineer in charge etc

Providing and Supplying of Storwel with Greenguard, Indoor

Advantage Gold, GreenPro etc. and should be mandatorily submitted

along with Bid.Storwel plain shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded construction. It should

have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door

thickness of 0.8mm (high yield strength) and all other components shall Rupees Fourteen

164 6.00 have a thickness of 0.9mm. These components shall be made of CRCA 14544.00 Thousand Five Hundred Nos

‘D’ grade high yield strength as per IS:513. The Storwel Plain should Forty Four Only

have a Mazak handle and Three way locking mechanism with Shooting

Bolts. It should have a height wise adjustable shelf mounting which shall

have a Uniformly Distributed Load Capacity of max 40 Kg. It should also

have a M10 Screw type Leveller with Hex plastic base.

The finishing shall include Epoxy powder coated to the thickness of

microns (+/- 10). Plenty of colour options and shelving options shall be

available.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Providing and Supplying office table of the following specifications Its

size shall be 1500 Width x 750 Depth x 740 Height . The top shall be

made from 25 mm thick pre- laminated board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated paticle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm

on the top and bottom side .The side panels have 2 glide screws each

for levelling of the desk. Modesty panel shall be made from 18 mm Rupees Seven

thick pre- laminated particle board . All the edges are sealed with 0.8 Thousand Eight

mm thick PVC edge band all around. Freestanding Pedestal shall be Hundred Seventy Eight

made from 18 mm pre- laminated particle board with a combination of Only

2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per

requirement . The drawers are provided with suitable slides for smooth

operation . All the pedestal drawers are centrally locked with a single

key .Drawer slides are of Hettich.The rate shall incugh Neckrest

connector Neckrest assembly has height adjustment of4.2 ± 0.5 cm and

Providing and Supplying office table of the following specifications. Its

size shall be 1200 Width x 600 Depth x 740 Height . The top shall be

made from 25 mm thick pre- laminated board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated paticle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm

on the top and bottom side .The side panels have 2 glide screws each

for levelling of the desk. Modesty panel shall be made from 18 mm Rupees Seven

thick pre- laminated particle board . All the edges are sealed with 0.8 Thousand One

mm thick PVC edge band all around. Freestanding Pedestal shall be Hundred Thirty and

made from 18 mm pre- laminated particle board with a combination of Sixty Paisas Only

2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per

requirement . The drawers are provided with suitable slides for smooth

operation . All the pedestal drawers are centrally locked with a single

key .Drawer slides are of Hettich.The rate shall inugh Neckrest

connector Neckrest assembly has height adjustment of4.2 ± 0.5 cm and

rotation adjust

Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X

61OmmH .) Providing and Supplying a Ward Care Bed Frame work of

specially designed CRC rectangular heavy tube. machine pressed CRC

Rupees Four Thousand

sheet top with proper support. SS head and foot bows with laminated

167 11.00 4545.00 Five Hundred Forty Five Smt

panels. Four side saline arrangement location L.eg fitted with shoes.

Pretreated and Powder coated. Selection as per Engineer-In-Charge

etc. completed. ( As per Photo attached)

Single Step stool is to be made of ERW square tube.Textured and

Rubber mat is to be provided, of 20mm X 20mm size. Tube 1.2 mm

thick and mat 3.0 mm thick Size:485(L) x 335 (W) X 210 (H) Step stool is

to be made of MS square tubes, is to be strong and firm. Top is to be

made of textured rubber offering firm grip for climbing Frame:It should

be made up of MS 19mmX19mm section of thickness 1.2 mm. Stool

top:stool top should be made up of MS of thickness1.2mm. Rubber

mat:steps should be provided with rubber Mat which is made of Rupees Two Thousand

168 3.00 natural rubber of thickness 3.2mm. Maximum weight:maximum safe 2525.00 Five Hundred Twenty Nos

work load should be 135 kg. welding:To ensure qood quality welding " Five Only

Co2 Argon" process should be adhered to. powder coating:

All metal components should be pre treated with zinc phosphating in

tank process and then powder coated with anti microbial epoxy

polyester powder coating .packing:goods should be supplied in

knocked down construction to reduce carbon emission. In house test

report proof:loading test , cycle tests , impact test. Certifications:

Providing & Supplying cafe chair with desklet.The Seat and Back should

be made up of injection moulded indoor grade PolyPropylene

compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm.

(W) x 40.5 cm. (H).The powder coated ( DFT 50±10 microns ) welded

tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ±

cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube.

The shoes should be made of indoor grade PolyPropylene compound

and snap fitted with tubular frame. The Armrest should be made of

indoor grade PolyPropylene compound and assembled over the tubular Rupees Four Thousand

169 15.00 frame. The "L" shaped desklet should be made of 1.8+-0.05cm thick 4090.50 Ninety and Fifty Paisas Nos

prelaminated particle board with 0.2+-0.05cm thick injection moulded Only

poly proplylene all around. Desklet should have back and front

adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm

thick MS rod which is spot welded to form a mesh like structure.Overall

Dimensions of Chair-Seat Height - 45.0 cm. Height - 84.5cm.Width-57.5

cm and Depth-67.ugh Neckrest connector Neckrest assembly has

height adjustment of4.2 ± 0.5 cm and rotation adjustment of

Providing and Fixing 3 Seater Pero Cross Beam made of black powder

coated regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x

0.2 +/- 0.014 cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made

Thousand Five Hundred

170 7.00 from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 11589.75 Nos

Eighty Nine and Seventy

0.013 cm thickness. The side Bar is made of chrome Plate solid steel

Five Paisas Only

cm +/- 0.03cm x 1.2 cm +/- 0.03 cm with fluting and plastic inserts. The

Shell to be assembled on the cross beam with help of M8 Bolts.

Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow

cover ,with 12mm thick prelam mdf back‐ 900x1950x100mm ‐ goldline

plus pu form 40 density 300 gsm cottan satin quilt cover.Mattress back Rupees Nine Thousand

putti made of 12mm thick prelam mdf bothside white finish.Kurlon dew Six Hundred Fifty Three

pillow 600x400 Fill: Polyester Fibre Quality of shell fabric: 110 GSM and Fifty Eight Paisas

cotton satin patti Outer Shell Layer: Cotton Fill Weight (in gms): Only

650.Bedsheet with pillow 100 Percent cotton of bombay dyeing or eq.

Supplying and Stacking of Tubular section of Stainless steel storage Rupees Nine Thousand

Rack of size 1200mm(width) X 600mm (Depth) and 1800mm height Two Hundred Twenty

frame of 304 grade steel.etc. One and Thirty Paisas

Providing and Supplying hospital locker. The bedside locker has

single drawer and cabinet with lock and with plastic molded handle.

There is space between plastic top and the cabinet to keep the general

items for the frequent use. Cabinet is Provisionided with lock to keep

the valuable items for the safety. overall dimensions should be

490mmW x 410mm D x 941mm H.Corner tube made of ERW round

tube with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of

CRCA sheet of 0.8 mm thick Provided with lock.( 470 mm x 410 mm x

382 mm).Top made of ABS of 2.2 mm thick. Top has recessed and

contoured shape for better aesthetic and usability.Plastic molded knob

is Provisionided with Matt finish and dome shaped for better Rupees Twelve

173 6.00 grip.Plastic molded castors with 50 mm dia placed in diagonal locking 12020.01 Thousand Twenty and Nos

arrangement.RAL white, plastic parts in Grey.5 kg UDL on both the tops One Paisas Only

and 10 kg in the cabinet.All metal components are pre treated with

zinc phosphating in 7 tank process and then powder coated with anti

microbial epoxy pough Neckrest connector Neckrest assembly has

height adjustment of4.2 ± 0.5 cm and rotation adjustment of

overall76°+ 2°. The complete neckrest assembly is retro fit to the main

chair.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.justment.• 4-position

locking with anti-shock feature.• Seat/back tilt

Providing and Supplying STRETCHER ON TROLLEY should have

Strecher on trolley with Overall dimension should be 2005 mm (L) x

mm (W) x 827 mm (H). It should be removable stretcher on trolley

mointed on castors.. The trolley should be made of 31.75 mm and

mm dia 1.2 mm thick and 1.6 mm thick ERW tube. The casters should

be 200 mm dia diagonal lockable castors. stretcher understructure Rupees Thirty Two

should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top Thousand One

should be made of 1.2 mm thick CRCA sheet. The stretcher should have Hundred Fifty Two and

provision to mount IV pole at four corners. The product should be pre Thirty Four Paisas Only

treated and powder coated with Epoxy polyster powder coating.The

maximum load bearing capacity should be 135 kg.The rate shall include

all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Providing and Supplying of IV pole of saline stand. Overall dimension

should be 250 mm PCD with height adjustable from 743 mm to

mm. it is fully SS made used on bed with telescopic rod for height

Rupees Four Thousand

adjustment. The bottom adapted is 12 mm dia, fixed tube is 15.9 mm

Four Hundred Seventy

175 6.00 dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 mm dia ERW tube. 4479.35 Nos

Nine and Thirty Five

there are 2 nos 6 mm dia hooks to hand saline bags. Maximum load

bearing capacity is 2kg per hook.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in

Providing and Supplying Foldable wheel chair should have Foldable

wheel chair with Over all dimension should be (L) 790 x (W) 600 x (H)

870mm Foldable frame structure should be made of section 22x1.2mm

A3 carbon steel with chrome finish. Cross bar should be made of A3

carbon steel with section 25.4 x 1.2mm.The Rear wheel should be made

176 1.00 of 24 inch Solid mag wheels with alloy in the rim .Integrated handrim 16452.90 Nos

Hundred Fifty Two and

shoud be provided to drive the wheel chair of section 16x1.2mm A3

Ninety Paisas Only

carbon steel with chrome finish. The front wheel should be of 8 inch

HUB made of PA polymer and outer with solid rubber. PU molded arm

rest and base should be made of ABS for better arm support .

There should be Leatherite strap for calf rest and leatherite cushion for

seat. The foot rest should be Adjustable alluminimum die cast foot rest

with updown and swivel type mechanism and Push Handles should be

made of moulded rubber grip to push the wheelchair. Hand brakes

should be provided to lock the wheelchair at desired location. The finsih

of chair should be antirust chrome .The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in

Providing and Supplying of Examination couch with full storage of

Examination couch with full storage- Overall dimension 1975 mm (L) x

560 mm ( W) x 805 mm (H). Examination couch with three drawers with

three cabinets, inbuilt step stool and BP tray holder.the base frame

should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets

should made of 1 mm thick CRCA sheet with recessed plastic handles

and with lock and plastic door latch. the hindges of the cabinet should

be made of sheet metal and pin arrangement. The internal dimension of

the two sidecabinets should be 422 mm (W) x 455 mm (D) x 540 mm

(H). the internal dimension of the centarl cabinet should be 422 mm (W)

x 455 mm (D) x 358 mm (H). The storage cabinet unit should be mount

tubular base frame. The head rest should be adjustable on gas spring

which should be actuated with C shaped handle lever . The drawers Rupees Forty Two

177 3.00 should made of 1 mm thick CRCA sheet with recessed plastic handles 42319.00 Thousand Three Nos

and work on double extension ball slides for smooth glide. the Hundred Nineteen Only

internaugh Neckrest connector Neckrest assembly has height

adjustment of4.2 ± 0.5 cm and rotation adjustment of overall76°+ 2°.

The complete neckrest assembly is retro fit to the main chair.The rate

shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.justment.• 4-position locking with anti-

shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT

ADJUSTMENT. The pneumatic height adjustment has an adjustment

stroke oi 10.0 ± 0.3 cn°.Pedestal Assembly : the pedestal is injection

moulded in black 30 Percent glass filled nylon and fitted with 5 nos.

twin wheel castors. The pedestal pi

There should be 1 mm thick CRCA made BP aparatus holder which

should be adjustable in height on a SS made height adjustable rod.

Total load bearing capacity should be 135 kg. The examination couch

should be provided with six numbers levelers made of metal and

plastic for adjustment on the uneven floor. All the metal parts should be

pre treated and powder coated with epoxy polyester powder

coating.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Providing and Supplying of Examination couch with full storage of

Examination couch with full storage- O overall dimension of L 2065 X

W 850 X H 850 mm. The backrest has ratchet mechanism for tilting the

backrest. Leg frames and intermediate frames should be made of ERW

tubes having section of 30 x 30 square tubes with thickness of 1.6mm.

Nylon 6 leg shoes is given to avoid wear and tear. MS sheet metal

lying surface of thickness 1.2mm is used. Top sheet metal panel base

frame of 25 x 25 ERW square tubes of thickness 1.6mm is used. Ratchet Rupees Twenty Six

178 1.00 is made of MS Strip with section 40 x 4 to Provision the backrest tilt. 26866.00 Thousand Eight Nos

The table is Provided with Leathrite calf rest which is adjusted on ss304 Hundred Sixty Six Only

made lithotomy rod. The Rod and the calf rest is ht adjustable and

swivel to achieve desired position. The table is Provided with SS bowl

stand to collect fluids and discharge during procedure. Table is pre-

treated and powder coated with epoxy powder coating. Safe working

load is 135kg. The rate shall include all materugh Neckrest connector

Neckrest assembly has height adjustment of4.2 ± 0.5 cm and

Providing and Supplying High Back Chair. SEAT/BACK A SSEMBLY: The

seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The

Back is made up of injection mou1ded glass filled nylon and

upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE :

47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane Rupees Twelve

seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 Thousand Two

179 4.00 kgf as per IS:7888 for 25 Percent compression.ARMRESTS : The 12292.71 Hundred Ninety Two Nos

adjustable armrest is designed with the following features :• Up-Down and Seventy One Paisas

adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest Only

structure which is Powder Coated and fitted with an armrest top. •

Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT

ASSEMBLY: The Lumbar support consists of polypropylene pad with

moulded polyurethane foam and covered with polyester fabric.

The Height of Lumbar pad can be adjusted through two projecting

knobs provided on the rear side of the pa6. Lumbar pad has an

adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO

MECHANISM: The adjustable tilting mechanism is designed with the

following features.• 360° revolving type.• Single point control.• Front-

pivot for tilt with feet resting on ground ensuring more comfort.• Tilt

tension adjustment.• 4-position locking with anti-shock feature.•

Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT ADJUSTMENT. The

pneumatic height adjustment has an adjustment stroke oi 10.0 ±

cn°.Pedestal Assembly : the pedestal is injection moulded in black

Percent glass filled nylon and fitted with 5 nos. twin wheel castors. The

pedestal pitch center dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The

twin wheel castors are injection moulded in black Nylon. NECKREST :

The Neckrest assembly consist of polypropylene pad with moulded

polyurethane foam and covered with polyester fabric Neckrest is fixed

to Back Assembly through Neckrest connector Neckrest assembly has

height adjustment of4.2 ± 0.5 cm and rotation adjustment of

overall76°+ 2°. The complete neckrest assembly is retro fit to the main

chair.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Total Amount Without GST

Total Amount Without GST

I/We am/ are willing to carry out the work @ _____________ % Above /Below ____________ Percentage (Should be written in Figures and Words) of the

Estimated rates mentioned above amount of my/ our Tender work out as under.

Estimated Amount Estimated Amount

Tender Rs. 1,68,08,350.00 Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In Words (In Words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

4 Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Stamp with signature of contractor City Engineer

Karamsad Anand Municipal Corporation