(8997/E8)

Amount

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as directed by Engr-in-charge.

Taking down and refixing after repair U/S tube light fitting any type and make from the location all as directed by Engr-in charge

Taking Down existing DBs/MCB/Isolators, complete all as specified

Taking Down Old UnServeciable Sub Main wiring of any size /Make, complete all as specified

Point wiring for modular fittings complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked , class V ( Make: Havell's, RR kable,ANCHOR ) in concealed PVC conduit (ISI Marked) not less than 20/25 mm dia heavy duty with accessories in surface of wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall, including modular cover plates and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly material and labour for (Note- rates of chasing/cutting & making goods shall be included in the unit rate), complete all as specified . (a)One light point or one fan point or bell point controlled by one switch

All as per Item No.5 above but One three pin 5 Amp socket on same board with other switches.

All as per Item No.5 above but One three pin 5 Amp socket on independent board.

All as per Item No.5 above but One light point controlled by two -two way switch.

All as per item No. 5 above but with 2.5 Sq.mm. (nominal area) cable for one 3 Pin 15 amp socket on independent board including one 1.5 sqmm copper conductor multi stranded green colour PVC insulated unsheathed cable 1100 volts grade as earth wire upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

All as per item No 5 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 16 Amp socket outlet below the board, complete all as specified and as directed

All as per item No. 5 above but with 4.00 Sq.mm. (nominal area) cable for one 3 Pin 15 amp socket on independent board including one 1.5 sqmm copper conductor multi stranded green colour PVC insulated unsheathed cable 1100 volts grade as earth wire upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F Modular switch flush type single pole one way 6 Amp ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular switch flush type single pole one way 16 Amp ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular socket outlet 2 in 1,5 pin 6 Amp flush type ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular socket outlet 2 in 1, 6 pin, 6 /16 Amp flush type ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular switch FT, SP, two way 6 Amp ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular bell push, flush type,6 Amp ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Socket stepped type Modular electonic fan regulator flush type ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular metal flush box 4/5 moduleI ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

S&F Modular metal flush box 6/7 moduleI ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider/ABB

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( Make: ( Make: Havell'sRR kable,ANCHOR ) ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling withexisting/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed (a) One light point controlled by one, one way switch

All as per item No.21 above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No.21 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No.21 above but One bell point controlled by one bell push.

All as per item No.21 above but One light point controlled by two, two-way switches

All as per item No 18 above but with using 2.5 Sq mm single core multistanded copper conductor cable including 2.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 15 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch piano flush, button type 5 Amp SP complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F switch piano flush button type 15 Amps SP complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F socket outlet 2-in-1, 3 Pin 5 Amps complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F switch piano flush type 5 Amps SP two way complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F Step type,electronic fan regulator fixing on the existing phenolic laminated sheet complete all as specified and as directed. Make:Legrand/L&T/Schneider

S&F calling bell DING DONG AC 230 Volt complete all as specified.Make ANCHOR/CONA/Vinay

S&F bell push,flush type 5 Amps. complete all as specified.Make Make:Legrand/L&T/Schneider

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed.

S&F Dome angle lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings complete all as specified and as directedwith LED Lamp 7 Watt. Make:Legrand/L&T/Schneider

Taking down fan, sealing cable end, dismantling blades and removing fan & blades, painting (white) with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, marking same MES No. with permanent Marker etc and hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in charge.

S & F in repair Capacitor 2.5 Mfd 220 volts complete all as specified and as directed by Engineer-in charge complete all as specified and directed by Engineer-in charge.

S&F in replacement switch piano flush, button type 5 Amp SP complete all as specified including taking down old one. Make :ANCHOR/Goldmedal/Havell's/Leader/ABB

S&F in replacement switch piano flush button type 15 Amps SP complete all as specified including taking down old one. Make:Legrand/L&T/Schneider/ABB

S&F in replacement socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps complete all as specified and as directed including taking down old one. Make:Legrand/L&T/Schneider/ABB

S&F in replacement socket outlet two in one three pin 5 Amp and 15 Amp flush type complete all as specified including taking down old one . Make:Legrand/L&T/Schneider/ABB

S&F in raplacement ceiling rose surface bakelite 3 terminals of size 65x25 mm. complete all as specified. Make:Legrand/L&T/Schneider

S&F in replacement electronic fan regulator 2 module (swicth type) on the existing phenolic laminated sheet complete all as specified Make:Legrand/L&T/Schneider

Fixing only replacement light fitting 22/20/18/10/9 watt tube light fittings with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size.(issued in Sch B), complete all as specified and as directed.

S&F mirror light fitting of any type and make with energy efficient light fitting LED type 8/9 watt duly prewired and complete with all acessories etc complete all as specified and as directed. Make : Philips/CG/Wipro/BAJAJ/Havells

S&F LED Type tube light fitting 8 watt , complete with LED Tube rod 8 watt , not less than 800 lumens complete with all acessories duly prewired and making connection to ceiling rose with flexible copper conductor cable twin core of size- 1.00 sq mm MAKE : CG/PHILIPS/ Wipro/ BAJAJ/ Havells

S&F Decorative wall mounting SS finish fixture with opal glass diffusure suitable and including 7 Watt LED Lamp (Thrid type ), complete all as specified and as directed. Make Havells Cat No.LHJE01106499 OR LHJC02108499

Supply and Fixing Pressure die cast LED refractor High bay 36 watt control gear housing IP 54 protection for light engine module & control gear box IP65 eye bolt provided for mounting purpose cat ref LWV 11-36-CDL/REF, complete all as specified and as directed. Make- Crompton

S & F LED strip for indoor & outdoor with driver 5mtr in lenght complete all as specified & directed. Cat Ref no- LST65RGB Make -Crompton.

S&F sheet metal enclosure with socket plug and MCB single pole and earth plug with a two pin complete with single pole MCB of 20 Amps capacity, complete all as specified and as directed.

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site, complete all as specified and as directed.

S&F distribution board manufacturer prewired , IP 42 in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 4 way , cat no.- SD 3809, complete all as specified and as directed. Make: LEGRAND/Havells

S&F distribution board manufacturer prewired , IP 42 in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 8 way cat no.- SD 3706, complete all as specified and as directed. Make: LEGRAND

S&F prewired 16 SWG distribution board IP-42 in sheet metal encl made out of 16 SWG when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 12 way, complete all as specified and as directed. cat no SD 3706 of Make LEGRAND/BCH/ABB

S&F distribution board in sheet metal enclosure Double door type , DBs , IP 43, to be used with 200 Amps rated confirming to relevant IS TPN 4 way, complete all as specified and as directed. Cat no.- 6077 50 Make : LEGRAND or , in Havells /STANDARD

S&F double door MCCB distribution board with provision for DPX MCCB and ELM as incomer and SP/TP MCB as out going TPN 4 way, complete all as specified and as directed. Make LEGRAND cat No. 6079 13

S&F MCB single pole 5 to 30 Amps, 'C Curve ISI marked , 10 KA, complete all as specified and as directed. Make-Legrand/Havells

S&F MCB SPN 16 to 40 amps,'C Curve ISI marked , 10 KA, complete all as specified and as directed. Make-Legrand/Havells

S&F MCB 4 pole, 415 volt, 63 Ampr 'C Curve ISI marked , 10 KA, complete all as specified and as directed. Make-Legrand/Havells

S&F MCB,10 Ka, TPN 63 amps C Series , complete all as specified and as directed. Make Legrand/Havells/ABB

S&F in repair in existing DB MCB,10 Ka, 4 Pole 100 amps C Series, complete all as specified and as directed. Make Legrand/ABB/Havells

S&F in repair in existing DB, MCB,10 Ka, 4Pole , 125 amps C Series, complete all as specified and as directed. Make Legrand/ABB/Havells

S&F MCCB 4 Pole DPX 160 , 16 ka 160 Amps, complete all as specified and as directed. Make Legrand/HAVELLS/Standard

S&F MCCB 4 Pole DPX 250 , 250 Amps 25 KA, complete all as specified and as directed. Make Legrand/Havells/ABB

Supply and Replace including taking down unserviceable MCB Single pole C series 5-30 Amp, complete all as specified and as directed. Make-Legrand/Havells/ABB

Supply and Replace including taking down unserviceable TPN 4 Pole of Capacity 63 Amprs, complete all as specified and as directed. Make-Legrand /Havells/ABB, 10 KA.

Supply and fixing in repair one bakelite/hylem sheet 10"X8" not less then 3mm thick after removing all connection including cutting/chassing to accommedate existing fitment and making connection including cadmium plated screws with cup washer, complete all as specified and as directed.

Supply and fixing in repair one bakelite/hylem sheet 7"X5" not less then 3mm thick after removing all connection including cutting/chassing to accommedate existing fitment and making connection including cadmium plated screws with cup washer, complete all as specified and as directed.

Supply and fixing in repair one bakelite/hylem sheet 5"X5" not less then 3mm thick after removing all connection including cutting/chassing to accommedate existing fitment and making connection including cadmium plated screws with cup washer, complete all as specified and as directed.

Disconnecting and taking down old U/S tube light fittings,any type and wattage & S & F LED batten fittings for LED tube (single side connection) including LED tube 1x10/1x12 watt-01 Nos connected with twisted flexible copper conductor from ceiling rose to connector complete all as specified & directed. Make :Crompton Fitting Cat No-LDCL-12-CDL or equivalent in Havells Cat No LHEXBHP7PN1W010/LHEWEBP7IN1W010 /philips Cat part No-BN150W LED13S and Bajaj cat part No 1211500 (BLTRU) complete all as specified.

Disconnecting and taking down old u/s surface mounted CFL fittings any type and wattage including S&F surface mounted LED downlighter with durable housing with removal driver complete all as specified and directed Make :Crompton or equivalent in Havells Cat No LHEAAGP6IA2W012 /philips Cat part No-DN170SLED10S and Bajaj cat part No 111645 (BGSLO).

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm. bore and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated Al conductor with an inner sheathing PVC tape ,armoured galvanised steel strip or wire armoured, electric cable of size 16 sq mm 2 core, complete all as specified and as directed.

M&L for circuit point with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including 20 mm. dia medium duty PVC conduit and conduit accessories and fittings fixed on wall surface Including one single core green colour PVC. Insulated unsheathed cable aluminium conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

M/L in repairs sub main wiring with 4 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC conduit of size 20 mm ISI marked (MMS) fixed on surface of wall/ceiling and making good the distrurbed surface of wall incl 2.5 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 4 Sqmm and One run of 2.5 Sqmm shall be measured as unit length, complete all as specified and as directed.

M&L for power point for AC/Security light with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.5 Sq.mm. (nominal area) drawing in and including 20 mm. dia medium duty PVC conduit and conduit accessories and fittings fixed on wall surface Including one single core green colour PVC. Insulated unsheathed cable aluminium conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

M&L sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 25/32 mm. dia PVC cassing-N- capping and fittings. Including one single core green colour PVC. Insulated unsheathed cable aluminium conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified and as directedincluding taking down old one.

M&L in repairs sub main wiring with 6 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through Concealed PVC conduit of size 20 mm ISI Marked (MMS)on wall/roof and making good the distrurbed surface of wall incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length, complete all as specified and as directed.

Supply and replace in repair switch 4 module cat no-633073 air Remote control including taking doune U/S condenser, complete all as specified and as directed.

Refixing of hanging surface wiring of any type (PVC Casing capping/PVC Conduit), complete all as specified and as directed.

Repair/replacement of single cable/wire for u/s circuit wiring with FRLS PVC insulated multistranded unsethead copper conductor, in existing pvc conduit/cassing N capping whenever, complete all as specified and as directed. (a) 1x1.5sqmm+1x1.5 sqmm earth wire

All as per Item No.82 above but 1x2.5sqmm+1x2.5 sqmm earth wire

All as per Item No.82 above but 1x4.0sqmm+1x4.0 sqmm earth wire

Supply and laying GI pipe 40 mm bore medium grade ISI marked with new GI fitting laid in trenches all as specified and directed. (Note : Rates inclusive of all fittings such as Tee, Bends,Socket, Reducers, Flanges etc required at site)

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

M/s Ankit Enterprises

Nvimal Engineers and Contractor