Special Repair to EI in Old Session Court Complex at Ambala City District Ambala.

Amount

Wire 1.5 Sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable. EL003

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp HSR No. 23.22.1.9

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings. MCCB up to 125 A FP HSR No. 23.22.2.1

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR No. 23.22.4.5

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR No. 23.22.5.1

6 amp. to 32 amp MCB's TRIPLE POLE HSR No. 23.22.5.5

6 amp. to 32 amp MCB's FOUR POLE HSR No. 23.22.5.7

EARTHING AND LIGHTENING ARRESTOR Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR No. 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR No. 24.1.2

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR No. 24.1.11

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR No. 24.1.13

Laying of underground cable in pipe /existing open/closed tench tc as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core HSR No. 24.2.4.1

16 Sq mm to 35 sqmm 2 to 4 Core HSR No. 24.2.4.2

Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core HSR No. 24.2.7.2

Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 4.5 metres but upto the height of 7 metres. HSR No. 24.4.4.2

Supply of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture 7 Mtr Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR No. 24.4.8.5

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR No. 24.5.2.4

RCC FOUNDATIONS FOR OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 70 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7m high pole HSR No. 24.8.5

S/Eof under ground cable ,loose in existing pipe or trenches complete with necessary connections . Supply & Erection of 10 Sq. mm 4 Core Cable Armoured under ground cable ,loose in existing pipe or trenches, complete with necessary connections complete in all respect including all material required to complete the job in all respect & up to the entire satisfaction of the Engineer in charge of the work. Make as per approved list. NS-1

Supply of 16 Sq. mm 4 Core Cable Armoured under ground cable ,loose in existing pipe or trenches, complete with necessary connections complete in all respect including all material required to complete the job in all respect & up to the entire satisfaction of the Engineer in charge of the work. Make as per approved list. NS-2

S/E of 40 mm diameter 1.5 mtr Long Singla GI bracket (B - Class) with GI collar0.50 mtr. long of suitable size to fit on octagonal pole with top dia 70 mm including necessary nut and bolt etc. required for fixing of bracket on top of 7 Mtr. long octagonal GI pole duly painted with aluminium paint as per detail drawing attached making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Single Bracket NS-3

Supply and erection of 72 watts LED street light Warm White with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work (Make Bajaj/ Havells/Crompton/Wipro). NS-4

GLOBAL POWER TECH

M/S GARG ELECTRICAL