Electrification for shifting energy meter in connection with re-alignment of KSEB LT pole at CUTEC Chakkittappara

90.12.7.44 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 50 sq mm

90.12.5.44 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/HUME / STONE WARE/ GI/ DWC pipe as required.4 core 50 sq mm

90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)

1.21.5 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

9.1.36 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm)

OD143598/2025-2026 Earthing with G.I. earth pipe 2.5 metre long( Hard soil), 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal/ coke and salt) as required

90.14.3.2 Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

OD144847/2025-2026 Fabrication, supply, conveyance, installation testing and commissioning of wall mounting, dust and vermin proof, cubicle type 3 Phase Energy Meter board comprising of the following components/ devices . Fabrication of fully partitioned, dust and vermin proof enclosure for Meter Box l assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front access facility, hinged doors for switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting 3 Phase Energy meter , 3 nos Kit kat fuse and Neutral link etc. powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of Meter Board assembly. The measurements will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of 3 Phase Energy meter board using 2.00mm CRCA sheet, powder coated (excluding base frame)

2.2.14 Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel. making connections. etc. as required. 125 Amp, 36 KA

OD144905/2025-2026 Providing and fixing of following rating of 3 nos Kit Kat Fuses and Neutral link at Existing Cubicle Meter Board.