Ceiling, flooring and allied works at Board room SCT Bhavan FACT -UC, Udyogamandal.

Providing and fixing false ceiling at all height with 12.5 mm thick tapered edge moisture resistant gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) including providing and fixing of frame work all as per detailed specification noted in Special Conditions of work Clause 2 c & d and as per the direction of the Engineer in Charge but excluding the cost of painting.

Providing , laying and grouting Anti-skid vitrified tiles of minimum 1200x600 mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer in all colours & shades in flooring, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 mm, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete as per direction of Engineer-in-charge.(Purchase price of tiles at site to be in the range of Rs. 60/Sqft to Rs. 70/Sqft.)

Laminated wooden floor with 10 years warrenty material minimum 16 mm thk. BWR grade (Merino, Green ply, Green lam, Century) marine ply and frame work with hard wood including cost of material, labour, etc…complete.

Providing and fixing wall panelling with 8mm BWR grade plywood pasted with 1mm laminate(Merino, Green or equivalent approved brand) and framed with 18mm BWR grade plywood as per design. All visible faces to be edge banded withapproved colour lipping. All laminates to be hot pressed on BWR grade ply including cost of all materials and labour.

Table inside side facade box covering 12mm thk. BWR grade (Merino, Green ply, Green lam, Century) marine ply with 0.8mm thk. Laminate and 1mm at edge. Give access door inside of round table . Rates are including cost of material, labour, hire charges, etc...complete.

Polishing the wood furniture/panelling with matt finish lacquer polish including cost of material, labour etc. complete as per detailed specification noted in Special Conditions of work Clause 2 f and as per the direction of the Engineer in Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface/ ceiling to prepare the surface even and smooth complete.

Applying one priming coats with primer of approved brand and manufacture,With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.