PROVN OF TOILET BLOCK AT DOGRAI TRG AREA, 01 TOILET BLOCK FOR MEN AND 01 FOR LADIES AT JAT STADIUM, 01 TOILET BLOCK FOR MEN AND ONE FOR LADIES AT BAKSHI PARADE GROUND IN JRC AND PROVN OF CERTAIN MINOR WORKS UNDER AGE BR-II OF GE (WEST) BAREILLY.

Amount

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laying over 15 mm thick cement mortar 1:6 for floor finishes complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tile over 10 mm thick plaster in CM 1:4 complete all as specified and directed

Demolition of concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc complete all as specified and directed

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed

M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete for sunken slab complete all as specified and directed

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

S&F in repair 15 mm dia fancy type stop cock/concealed cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified.

S&F in repair PVC (SWR) floor trap with CP grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to Floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections including cleaning for refixing or remvoval complete all as specified and directed by Engr-in-Charge

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or remvoval complete all as specified and directed by Engr-in-Charge

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded aggregate) cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4. complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4. complete all as specified and directed.

M & L for providing Plain cement concrete, Type B1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for chamfered edge, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L providing RCC (nominal mix) type 1:2:4, type B1 using 20mm graded aggregate as in platfoams, slabs, wash basin slab etc for water point and the like including necessary fomwork (straight or curved) complete all as specified and directed.

S&F Mild steel bars (TMT bars) 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips in reinforcement for concrete complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering doors, etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hangiong door fittings (Monkey caging for water tank) and hanging; also fastening and fixing complete Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub-base / sub floors complete all as specified and directed.

M&L 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in flooring and finished even and smooth without using extra cement complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment of approved design and patterm laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed.

M&L for rendering 15 mm th in CM 1:4 on fair faces of brickwork or concrete surfaces mixed with water proofing compound on top layer as per manufacturer instruction complete all as specified and directed.

Supply only Integral Water proofing Compound complete all as specified and directed.

M & L Preparation of new steel surfaces of any description, over 10cm in width of girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for three coat of white wash on wall including preparation of old treated plastered wall surface complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated surplus material (soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs incl complete fittings and fixtures complete all as specified in SSR Part I and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) complete all as specified and directed.

S&F of 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed.

M&L for glazed (coloured) ceramic tiles wall 300 x 600 x7mm thick on vertical faces of walls including 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Excavation in Post holes (or similar holes ) in any type of soil, each not exe 0.5 cum , getting out , returning filling and ramming carts not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete all as specified and directed.

M & L for Steel work in tubular hollow rectangular/Square trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.

M & L Cement concrete type C2 (1:3:6 40 mm graded stone agg) in foundations, filling post hole and mass concrete completed all as specefied and completed

S&F Pre-coated galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavation in over area not exceeding not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

M & L for RCC M-25 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L for RCC M-25 (20 mm graded aggregate) Columns, pillars, piers, posts and struts and the like

M & L for RCC M-25 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concreteand the like

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed

M&L providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of Engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of Engineer-in-charge, manufacturers specification and drawing

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm complete all as specified and directed.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F of vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed.

S&F Vitreous china wash basin white flat back 550mm x 400mm including pillar tap but, waste pipe, chain, plug, brackets of iron angle complete all as specified and directed.

S&F 32 MM CP waste coupling, complete fitting for wash basin complete all as specified and directed.

S&F PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed

S&F PVC (SWR) floor trap with CP grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper with airless electric Sprayer over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L 5 mm thick rendering on Ceiling concrete surfaces in cement mortar 1:3 with water proofing compound, incl finish even and fair without using extra complete all as specified and directed.

M&L Preparation of newly plastered surfaces and applying Two coat of white wash on ceilings complete all as specified and directed.

M &L for 100mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 laying over concrete bed for 100mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F Vitreous China Urinals Bowl type flat back, white 465x355x265mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specified and directed.

S&F CP spreader for urinals complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil Complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in beams, cantilevers, bressumm?ers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

M & L for Form work to soffits of suspended slabs flat surface of concrete and chajjas finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

Mild steel TMT bars 6 to 8 mm dia as in stirrups and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or TMT bars complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L broken stone or boulder hard core of gauge n exc63 mm deposited spread and levelled in layers n,exc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M&L Damp proof course 40mm thick of PCC type B0 1:2:4 using 12.5mm graded stone aggregate complete all as specified and directed.

M & L for rendering 12 mm thick of fair faces of brick work or concrete surfaces cement plaster 1:6 finished even and fair without using extra cement complete all as specified and directed.

M&L for three coats of white washing on wall surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed.

M&L Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, complete all as specified and directed.

M&L for three coats of white washing on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, door/ window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finishes, floors etc complete all as specifeid and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. complete all as specified and directed.

S&F for 35 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed.

S&F of extruded aluminium handles fabricated type anodised 200 mm long complete all as specified & directed.

S&F of 300mm long aluminium anodised sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S& F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed.

S&F Figured glass, pin head type 3mm thick and glazing with aluminium glazing clips in square n.exc 0.5 sqm in each pane. complete all as specified & directed.

M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified & directed.

S&F PVC (SWR) bends any radius 75mm bore with access doors complete all as specified & directed.

S&F PVC (SWR) Ventcowls of bore 110mm complete all as specified & directed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

S & F 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.

S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 90 gms) complete all as specified & directed.

S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 190 gms) complete all as specified & directed.

S&F Vitreous china counter sunk wash basin, white, oval shape excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified & directed.

S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures as complete all as specified & directed.

S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified & directed.

S & F of vitreous china wash down water closet (pedestal pattern) white compete, including connectiong drain pipe and to flush pipe anti syphonage pipe etc complete all as specified and directed.

S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S & F for PVC waste pipe of 32 mm dia for WHB etc complete all as specifed and sirected.

S&F of 100mmx100mm stainless steel grating complete all as specifed and sirected.

S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specifed and sirected.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment of approved design and patterm laid over a layer of 25 mm thick sand cushion including filling the joint with sand over 75 mm thick PCC 1:4:8, Type D2 (using 40 mm graded aggreagte) as in sub base incl nccessary earth work and PCC for kerb of tiles complete all as specifed and sirected.

M & L for laying of 150 mm dia reinforced concrete pipe, class NP2 pipe laid in trenched and jointed with collers sealed with cement including PCC bebbing, packing under and completely surrounding the pipes after they are laid and tested complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and exc 1.5m depth but not exc 3.00 mtr for foundation etc or walls cess pits manholes n.exc 10 Sqm on plan and getting out in Hard and dense soil complete all as specifed and sirected.

M & L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortor in 1:6 complete all as specfied and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint using airless spray technology of operating single spray gun and paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying weather proof paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for two coats of plastic emulsion over coat of primer over a coat of putty on wall surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed.

M&L for Vitrified double charged coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar complete all as specified and directed.

All as per serial item No 127 as above but as in vertical surfaces of tiles i.e skirting, dado up to height of 3 m etc and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed.

M&L for 20 mm thick Granite (Z- black colour only) machine cut and machine, polished,and moulding, window/door cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados, wall cladding/ gate pillers caldding like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as spd and directed.

S&F for 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall with necessary fittingcomplete all as specified and directed.

S&F for 20mm bore CPVC tubing of SDR 11 with all fittings' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

S&F for 15 mm bore CPVC tubing of SDR 11 with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

S&F in repairs Vitreous China table/counter top rectangular shape wash basin of suitable size (600 x400 x 120mm ) including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling complete all as specified and as directed. Model : Cera Cat Part No S2020141, Kerovit Cat part No :- KB2243 or Jaquar : KVS WHT 35935

S & F in repairs vetreous china wash down urinal closet water less key valve with key adopter of min size 375 mm x 390 mm x 590 mm incl waste pipe, waste coupling, fancy type concealed push cock, concealed bottle trap and connection to water line to including necessary fixing and fitting complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77CM / 65x35x76 complete, including connection to drain pipe etc complete all as specified and directed. Make:- Kerovit Cat Part No: INSIGNIS KS710, Hindware Cat part No.- 92573, CERA CAMPBELL Cat No S1013203

Internal E/M

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof) including pressed steel terminal sunken boxes and covered with 3 mm thick plastic laminated sheet cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.

S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

S&F LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

S&F MCB SPN 16 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .

Supply, installing, testing and commissioning exhaust fans PVC body 250 mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.

Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

External E/M

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 2 core. complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dence soil for laying of LT UG cables/base for Pole etc complete all as specified and directed.

M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed.

M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed.

S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

M/S SATISH KUMAR JAIN (BID ID -3184631)

M/S Harshri Nath Enterprises (BID ID -3184502)

Harsha Consultant and Builders (BID ID -3183793)

UTTRAKHAND BUILDERS (BID ID -3184176)

RIYASAT ALI KHAN (BID ID -3184515)

JAI SRI RAM ASSOCIATE (BID ID -3184881)

Bidder Name

SANJEEV ENTERPRISES