Aug. of various water supply scheme on the Left Bank of Kurpan Khad in Nirmand Block Distt. Kullu HP

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge. (Group C)

Wiring for twin control light point with 15 Sq mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way, 5/6 amps piano type switch and earthing the light point with 1.5 Sq.mm HRFRLS/PVC insulated single core copper conductor cable as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge. (Group C)

Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

2x1.5 Sq.mm

Wiring for power plug with 2x4 Sq mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with | No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

2x4 Sq.mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

2x1.5 Sq.mm

2x 10 Sq.mm

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing ceiling rose on the existing junction box/wooden block including connections etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing bakelite batten/angle holder including connections etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing Ding-Dong/Electronic musical bell, suitable for DC/AC single phase 230 volts complete as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate. blanking plate, cable, identification labels interconnections phosphatized and powder painted, including earthing etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Double door-16 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Single pole Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

63 Amps. Cat-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Exhaust Fan, Light duty, (Domestic) 225 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No CP connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

15 Liter capacity water heater (Cat-A)

Provinding and installation of following Type of surface mounted with slim square/round type LED Downlight in white finish with anti glar polycarbonate diffuser and seprated energy effcient constant current, non-intregal, eletronic driver. suitabe for input voltage AC220-24, 50/60 HZ complete with all assessories, connection testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

LED 24 Surface 24 watt light.

LED 36 Surface 24 watt light.

Provinding and installation of following of ultra slim decorative LED Batten with extruded alminiumheat sink with anti glar polycarbonate diffuser and energy effcient constant intregal, ele tronic driver, suitabe for input voltage AC 220-240V,50/60Hz complete with all acessories, including with mounting clips and &-looping out wire, connections and testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

LED Batten Light 20Watt 1200mm

Provinding and installation of following type of surface mounted with slim square/round type LED Downlight in white finish with anti glar polycarbonate diffuser and seprated energy effcient constant current,non-intregal, eletronic driver, suitabe for input voltage AC 220-240V,50/60Hz. complete with all accessories, connections, testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

LED 6 watt Panel

LED 12 watt Panel

Provinding and installation of LED mirrior light with decorative gray end cappolycarbonate body and riribbed opal diffuser including making connections, testing and commissiong etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Mirrior Light 5 watt

Supply and wall fancy light champagne opal glass with crome finished wall lampsuitable for E14 LED 4 SW and suitabe for input voltage AC 220-240V ,50/60Hz. complete with all accessories, connections, testing and commissioning etc as required.

Wall fancy light.

light opal glass with chrome wall lamp.

Supplier and fixing Chandelier frosted glass with crume finished ceiling light and suit able for E27 LED 4watt and suitabe for input voltage AC 220-240V, 50/60Hz complete with all accessories, connections, testing and commissioning etc as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supply and fixing Ball Indicator suitabe for input voltage AC 220-240V,50/60Hz complete with all accessories, connections, lesting and commissioning etc. as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Ball Indicator 12 Way

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

25 mm dia

Supplying and drawing co-axial TV cable, RG-6 grace, 07mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed, steel/PVC conduit as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing installation, testing and commissioning of Split Type Air-conditioners 1.5 Tonne with remote control. Hot & Cold, 250 Volt, 50 Hz AC supply Complete with stand, installation at site, making connection etc as required complete in all respects. Volt as or eq. make 1.5 Tonne)

Earthing with cooper earth plate600x600x3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but-without charcoal or coke and salt) complete as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Supplying and laying SWG Copper wire at 0.50 mtr below ground level for earth electrode conductor, including soldering etc, as required

Providing and laying of one No aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground, to be laid 1 meter below the ground level including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering complete as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Armoured cable 50 sq. mm (3.5 core)

Supply installation testing and commission of wall mounted panelol suitable dimension made from 1.6mm thick CRCA sheet complete with MCCB 100AMP TP 25KA TMR spreader links, copper bus bar 100Amp as incommer and provision for 1/2/3 phase submain as outgoing and MCB DB DB D/D of required ways in the panel including LED phase set as required complete in all respect

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 vo'ts grade direct in ground, to be laid 1 meter below the ground level including excavation and refilling the trench eic as required, but excluding sand cushioning and protective covering complete as required complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Armoured cable 10 sq. mm (twin core)

Supply, installation, commissing of LED drop down fixture made of spun alluminium body with powder LED are mounted directly on in built heat sink, A UV stablized pc/pmma Diffuser is provided for glair lighting with high visual comfort Post Top 30 Watt

Erection aluminium CLASSIC tubular pole of suitable length The pole to be mounted on a 1:2:4 cement concrete base (pedestal) of 220 mm dia and 375 mm foundation bolt depth in a hole of excavation about 300 mm dia and of suitable depth, to be filled with 1:3:6 cement concrete up to a height of 450 mm from bottom and then fitted with MS bolts/nuts of 12.5 mm dia, 375 mm length complete in all respects as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.

Nitin Krate (BID ID -513187)

NARESH KUMAR (BID ID -513178)