Conestruction Under Ground Gutter Work At Villege Charan Tungi Ta. Lalpur Dist. Jamnagar

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead in (B) Hard Soil. (SOR2024-25/PG-71/04B001B)

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead in(C) Hard Murrum (SOR2024-25/PG-71/ 04B001C)

Construction Brick Masonary chamber with Brickwork using common burt clay building bricks having crashing strength not less than 35 kg/sq.cm in foundation and plinth in cement mortar 1:6(1-cement 6-sand ) (B) Conventional with 15mm thick cement plaster in singal coat on brick walls for interior plastering up to floor two level and finished even and smooth in Cement mortar 1:4 (1-cement 4-sand ) with providing and laying 7cm thick cement mortar 1:3:6 (1-cement 3-coarse sand 6-crushed stone aggregates 20 mm nominal size ) and curing complete at the bottom of chamber (Inside Size 400mm x 400mm and 0.60m deep) (Rate Analysis)

RCC Precast M.H. Frame & Cover Manufacture Supply & Delivery at store or at site of work precast R.C.C. M.200 Frame & Cover suitable to drainage M.H. and as per type design and drawing including cost of reinforcement M.S. Angles or Flat, curing mold work etc. Heavy Duty Frame suitable for 50cm opening of MH (GWSSB SOR PG 17/10.4.A)

Providing laying (to level or slopes)and jointing light duty non-pressure pipes with collars for culverts including setting and joining the pipes in cm 1:2 watering and laying (to level or slope) of IS clause NP2 of following internal diameters. (i) 300 mm Dia. (SOR 2024-25/PG-171/24007DA)

Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundation etc. in layers not exceeding 20 C.M. in depth consolid-ating each deposited layer by ramming and watering (SOR 2024-25/PG-69/04006)

Providing and fixing Marble stone Number plate Set in cement Mortar 1:4 including finishing and engraving letters etc.complete. (SOR 2024-25/PG-186/26087)