Repairs to traverse wall and gantry of bldg. no. 356, 357 and 361 and repairs to shed of bldg. no. 352, 353 and 354 at F4 section at AFK.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).

Taking down shutter of any descriprition up to 2 sqm each & removing to store as directed

Excavating over areas, n exc 1.5m deep and getting out hard/ dense soil

Only labour for Hard core of gauge exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders (except stone).

M&L for Moorum /red bajari filling in floor or pavings, laid in layers n exc 15cm thick,spread, levelled and rammed including watering

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25cm. Soft/ loose soil/hard/dense soil.

M&L for providing cement concrete type B 1:2:4 mix (20mm graded aggregate) in foundations, filling and mass concrete fair finished with necessary centering.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate in Foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete etc complete.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors/ RCC or as directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter rough finished surface of concrete flat.

M&L for providing formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc. vertical or to batter rough finished surfaces of concrete flat.

M&L for deformed or twisted bars 10mm Dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for deformed or twisted bars 6mm to 8mm Dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Finishing greeen cement concrete surface even and smooth with using extra cement.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’, thickness of concrete slab 100mm.

M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:6, complete

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing even and smooth without using extra cement.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, hard/ dense soil

S&F rolled mild steel Fe 410-W(Gde-E-250) quality-A for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F rolled mild steel Fe 410-W(Gde-E-250) quality-A for MS Plates/ sheets (plain or chequered) channels, square cut or notched with riveted, bolted or welded attachment

S&F plain, solid, straight chowkats and frames wronght framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints using 2nd class hard wood.

S&F 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats using 2nd class hardwood.

S&F for cast brass, bright polished Parliament hinges, heavy weight, width of recess between flanges (when in open) Size of hinges 100mm.

S&F extruded brass handles, fabricated type polished, size of handle = 150mm

S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts,length of bolt 300mm.

S&F Brass sliding door bolts, with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rolled or drawn brass bolts, length of bolt= 300mm & more length.

M&L 6mm thick asbestos cement , corrugated or semi corrugated sheet in roof fixed with J-type /L-type hook bolts as per site requirement.

S&F 2mm thick Fiber glass reinforced translucent corrugated sheet with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in liew of screw as directed by EIC.

M&L for preparing plastered or unplastered new/old surfaces and applying two coats of cement paint on walls.

M&L for preparation of new or previously untreated wood and wood based surfaces or any description, not otherwise mentioned over 10cm width or girth and applying two coats of fire resisting paint with necessary primer

M&L for preparation of new or previously untreated steel or iron surfaces of any description , not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer

Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed. Soil ,rock, P.C.C.

Credit Item-Old unserviceable stone/ brick bats obtained from dismantling

M/S TIRUPATI GOROBA SHENDGE (BID ID -857270)