C/o Control Room and Transit Camp at Rajgundha (wildlife Range Uhl at Bir) District Kangra under Wild Life Division Hamirpur(HP).

Excavation in fourndation/trenches etc. in earth work, lift upto 1.50 meter stacking the excavation soil not more than 3 meter clear from the edge of the excavation, in pick work & jumper work

Stone solling properly hand packed filling anff consolidating with power road roller to the required grade and camber i/c soreading watering and rolling of binding material murum & earth etc. b) above 100mm thick

Providing and laying C:C 1:5:10 (1Cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and curing complete execluding cost of centering and shuttering in foundation and plinth

Providing form work of ordinary timber plan-king so as to give rough finish i/c centering & shuttering trutting and propping etc. height of propping ad cement below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced conc. & plain conc. work in : Beam, cantilevers, lintels, RCC Sesmic band etc. not exeeding 1 mtrs. in depth

Beams at plinth level & roof level

Flat surface such as slabs, shelves & balconies etc.

Providing & Laying cement concrete 1:2:4 (1Cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including curing complete but excluding cost of work and reinforcement concrete work in :

Suspended floor roofs etc./Beams & lintels

Providing mild steel/ tor steel reinforcement for RCC work including bending, bending and placing in position complete up to floor two level: Beam lintel 110 kg/Cum

Random rubble masnory with hard stone in foundation and plinth including leveling with cement concrete 1:6:12 (1Cement : 6 sand : 12 graded stone aggregate 20mm nominal size) cement mortar 1:6 (1Cement : 6 coarse sand )

Brick work with common brunt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1Cement : 6 coarse sand ) with Modular bricks

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fasterner shall be paid for separately). Deodar wood

Providing and fixing panelled and galvanized shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for sepereately, all complete as per direction of Engineer-in--charge. Second class deodar 40mm thick shutters

Fixing anoid sliding door bolt anodized transport or dyed to required colour and shade with bolts and nuts screws etc. complete 300x16mm or 250x16mm (small 250x16mm for Door)

Fixing of M.S. hooks and eyes.

20mm thick cement plaster in 1:5 (1 Cement : 5 sand in respective ratios) in fair/rough side of brick walls for plastering upto floor two level i/c arises, internal rounded angles, chamfers and / or rounded not exceeding 10mm in girth and finished even and smooth i/c scaffolding

6mm cement plaster of mix: 1:3 (1 Cement : 3 fine sand) control room shelf

Applying red oxide coat over new steel work and other metal surface after and i/c preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushing fine steel wool scribers & sand paper with ready mixed priming paint brushing red lead red oxide/ zinc oxide chrome. As per item No.23

Painting two coats (excluding primary coat) on new steel and other metal surface with enamel/readyy mixed/ cooaltar paint briushing to give an even shade i/c cleaning the surface of all dirt, dust & other foreign matter. As per item No.23

Applying primer coat over new wood and wood based surface after and i/c preparing the surface by throughly oil grease, dirt and otherforeign matter (ready mixed primer/enamel primer/ wood filler transparent liquid for vanish).

painting two coat (excluding priming coat) on new wood and wood based surface with enamel/ready mixed flat oil paint bruhing to give an even shade i/c cleaning the surface of all dirt dust and other foreign matter and sand papering as per item No.19

Providing corrugated g.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheet complete (uo tp any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275 gm/m2 (including extra 20% sloppy are of roofing)

channel & angle @25 kg/Sqm of roofing area

Providing ridges or hips of width 60cm overall width plain G.S. sheet fixed witf polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275 gm/Sqm

Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts nuts 8mm dia G.I. limpet and bitumen washers complete: 1.60mm thick with zinc coating not less than 350 gm/ Sqm

Wall painting two coat with oil bound interior & exterior weather proof snowcem of approved quality and shade on undecorated wall surface to give an even shade i/c thoroughly brushing the surface free from all dier, dust foreign matters and sand papering i/c scaffolding

Oil bound inner side

Snowcem outer side

P/F M.S. plain grills of required pattren in wooden frame window etc. with M.S. flats/square or ound bars with round headed bolts and nuts or by screws i/c oxide priming coat (with material) M.S. flat/bar, angle/square iron & round M.S. Pipe etc. 225 kg/Cum (6.36 Sqm)

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screw etc complete. 125x65x2.12MM

Providing and fixing ms bo sheet1.66 mm to 2mm thick in eavesboard/facia including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in colours and shades, laid on 20mm thick mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3Kg/Sqm including grouting the joints with white cement and matching pigments etc. complete (Size of tiles 500x500mm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive(water based) confirming to IS:15477, in average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately) Tile 500x500mm

Add 166.66% on HPSR 2012-13

Providing and fixing of electricity Complete @5%

Providing and fixing of water supply Complete @8%