Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.7 L+₹1.9 L (5.43%)Rejected-Finance 32 GOLA MAHAL P O BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹38.5 L+₹2.8 L (7.79%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹38.8 L+₹3.0 L (8.40%)Rejected-Finance 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹41.0 L+₹5.2 L (14.6%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
| Sl No | Description | Qty | Unit | SENCO L2 | M/S H.P Singha L4 | MAZUMDER AND CO L3 | ABHISHEK CONSTRUCTION CO L5 | BANERJEE ENTERPRISE L8 | B.ROY AND COMPANY L7 | N S CONSTRUCTION L1 | SHARMA CONSTRUCTION L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlars facing dressed stonework & precast concrete articles complete all as specified and directed. | 29 | CUM | 800 ₹23,200 | 880 ₹25,520 | 850 ₹24,650 | 850 ₹24,650 | 890 ₹25,810 | 860 ₹24,940 | 720 ₹20,880 Lowest | 870 ₹25,230 |
| 2.00 | M&L for brick work with sub class 'B' bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. | 25 | CUM | 8,000 ₹2,00,000 | 8,250 ₹2,06,250 | 8,200 ₹2,05,000 | 8,150 ₹2,03,750 | 8,250 ₹2,06,250 | 8,300 ₹2,07,500 | 7,500 ₹1,87,500 Lowest | 8,200 ₹2,05,000 |
| 3.00 | M&L for brickwork with subclass 'B' bricks locally available best quality , straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. | 40 | SQM | 960 ₹38,400 | 950 ₹38,000 | 980 ₹39,200 | 940 ₹37,600 | 965 ₹38,600 | 945 ₹37,800 | 900 ₹36,000 Lowest | 950 ₹38,000 |
| 4.00 | Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 1,150 | SQM | 90 ₹1,03,500 | 80 ₹92,000 Lowest | 98 ₹1,12,700 | 86 ₹98,900 | 90 ₹1,03,500 | 95 ₹1,09,250 | 80 ₹92,000 Lowest | 90 ₹1,03,500 |
| 5.00 | M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. | 1,000 | SQM | 303 ₹3,03,000 | 310 ₹3,10,000 | 320 ₹3,20,000 | 318 ₹3,18,000 | 340 ₹3,40,000 | 330 ₹3,30,000 | 295 ₹2,95,000 Lowest | 320 ₹3,20,000 |
| 6.00 | M&L for rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. | 400 | SQM | 310 ₹1,24,000 | 320 ₹1,28,000 | 325 ₹1,30,000 | 325 ₹1,30,000 | 345 ₹1,38,000 | 335 ₹1,34,000 | 295 ₹1,18,000 Lowest | 330 ₹1,32,000 |
| 7.00 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 61.25 | CUM | 1,000 ₹61,250 | 900 ₹55,125 | 1,200 ₹73,500 | 1,100 ₹67,375 | 1,200 ₹73,500 | 1,150 ₹70,437.5 | 750 ₹45,937.5 Lowest | 1,120 ₹68,600 |
| 8.00 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed. | 18 | CUM | 7,000 ₹1,26,000 Lowest | 7,500 ₹1,35,000 | 7,200 ₹1,29,600 | 7,150 ₹1,28,700 | 7,350 ₹1,32,300 | 7,250 ₹1,30,500 | 7,000 ₹1,26,000 Lowest | 7,200 ₹1,29,600 |
| 9.00 | M&L for 100 mm thick cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in floor, finished even and smooth without using extra cement complete all as specified and directed. | 150 | SQM | 810 ₹1,21,500 | 700 ₹1,05,000 Lowest | 820 ₹1,23,000 | 810 ₹1,21,500 | 820 ₹1,23,000 | 815 ₹1,22,250 | 800 ₹1,20,000 | 825 ₹1,23,750 |
| 10.00 | M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, kerbs or mud stops, top of chajjas, basement for water tank etc rounded or chamfered on edges including necessary form work finishing the surface even and fair with using extra cement complete all as specified and directed. | 2 | CUM | 8,600 ₹17,200 | 9,000 ₹18,000 | 8,500 ₹17,000 Lowest | 9,200 ₹18,400 | 9,400 ₹18,800 | 9,300 ₹18,600 | 8,500 ₹17,000 Lowest | 9,200 ₹18,400 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
15 Jul 2025, 6:00 pmClosed
GE BARRACKPORE
Office of the GE BARRACKPORE, KOLKATA - 700120
MISC REPAIR TO FENCING, BOUNDARY WALL, DRAIN, HARD STANDING, COMPOUND WALL, PCC PATH ETC AT ZONE B AT BARRACKPORE CANTT UNDER GE BARRACKPORE
2025_MES_716559_1
8138/E8
Open Tender
Civil Works
Item Rate
180 days
Barrackpore
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹500
GE BARRACKPORE
₹66,000
Yes
12 Sept 2025
24 Jun 2025
17 Jul 2025
24 Jun 2025
15 Jul 2025
8 Jul 2025
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlars facing dressed stonework & precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks locally available best quality , straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed.
M&L for 100 mm thick cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in floor, finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, kerbs or mud stops, top of chajjas, basement for water tank etc rounded or chamfered on edges including necessary form work finishing the surface even and fair with using extra cement complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in floor, hard standing, sub base floor etc complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, paving, floor, hard standing, sub base floor etc including finishing the cement concrete surface even and fair without using extra cement complete all as specified and directed.
M&L for broken bricks hardcore of gauge exceeding 63mm but not exceeding 100mm deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specially provided for complete all as specified and directed.
M&L for precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slab in drain/mainhole set in cement mortar (1:6) complete all as specified and directed. (NOTE: Cost of form work is deemed to be inclusive of unit rate quoted by the contractor & reinforcement shall be measured & paid separately.)
M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F of TMT bars 6mm to 8mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred, sopped ends etc complete all as specified and directed.
Add or deduct for each 25 mm girth or part there of over or under 30 cm complete all as specified and directed. (Note: For adjustment purpose only)
M&L for broken glass coping on top of wall in CM (1:3) including taking down old broken glass coping all as specified and directed. (Note: Broken glass shall be used not less than 2.00Kg/Sqm)
M&L for pre-polished coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick cement screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2008 (M-35 grade) laying over and including 50mm thick sand filling complete all as specified and directed.
S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or forged into spikes; framed guard bars; barred iron doors; ladders, railings, framed brackets, walk ways, frame work of water tank and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed.
M&L for applying two coats of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER using smart technique including preparation/levelling of new surface of wall using manual sand papers(where reqd) of approved grade complete all as specified and as directed.
M&L for complete removal of existing wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint using air less paint sprayer having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 sqm over and including minimum 1.5mm thick wall putty using smart technique over old surfaces complete all as specified and directed.
De-silting/cleaning of area drainage of excavation of liquid mud/soil and removing of excavation liquid mud/soil exc 50 mtr but n.exc 100m complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.
S&F for continuous brick edging with burnt clay bricks of subclass 'B' brick (locally available best quality) with width equal to the length of the brick laid dry on edge vertically complete all as specified and directed.
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade B all as specified and directed.
Dismantling structural steel work including doors, gate but excluding framed truss etc. Complete all as specified and directed.
Dismantling wrought iron or mild steel of any description and in any position complete all as specified and directed.
Dismantling posts or struts (R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete, brick work, masonry etc complete all as specified and directed.
M&L for 18-20mm thick Mirror polished, high gloss finish Granite (absolute Jet Black) work as in wall, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary cutting as required over 10mm thick screed bed or bedding layer of cement mortar (1:4) for laying and finishes complete all as specified and directed.
Dismantling of expanded metal any thickness or mesh, n.exc 4 Kg fixed with steel or wood fillets if any complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
S&F of angle iron posts and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc including MS flat iron fillets and MS Nut and bolts, (for securing wire meh etc) including all necessary drilling, bolting, welding or riveting etc and similar work conforming fo Fe-290-Gde-E-165 complete all as spcrified and directed.
Supply only galvanised iron chain link fencing of any mesh size and type (minimum 3.8 mm dia wire mesh) complete all as specified and directed.
Fixing only chain link MS galvanised fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. (Note: Meterials to be used in item No.37.00 here-in-before)
Supply only MS round bars 10mm dia for securing chain link fencing fixed to RCC fencing posts as per Fe-410-W (Gde- E-250) quality 'A' or Fe-290 (Gde E-165) complete all as specified and directed. (Note: Meterials to be used in item No.37.00 here-in-before)
S&F for mild steel screw bolts (machine made) 11 to 15mm with hexagonal or square head at one end and screwed the other end, each screw end to be fitted with two washers and one hexagonal or square nut, length of bolts not exceeding 50mm long complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new steel surfaces of any description not exceeding 10cm width or girth complete all as specified and directed.
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. including taking down old unserviceable barbed wire complete all as specified and directed. (Note: Each line of wire to be measured).
Dismantling of asbestos cement (corrugated, semi-corrugated etc.) sheets in roof coverings complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws / 'L' or 'J' type or cranked hooks bolts complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of alkali resistant primer over on old decorated plastered surface of wall after and including complete removal of existing treatment and preparation of surfaces complete all as specified and directed.
M&L for heavy duty floor tiles of size 300mm x 300mm, 10-13mm thick set, jointed and pointed in neat cement slurry and pigment or eazy grout of tiles over and including 15 mm thick cement screed bed in cement mortar (1:4) complete all as specified and directed.
SENCO (BID ID -3357095)
MAZUMDER AND CO (BID ID -3357506)
M/S H.P Singha (BID ID -3357126)
ABHISHEK CONSTRUCTION CO (BID ID -3357612)
SHARMA CONSTRUCTION (BID ID -3358288)
B.ROY AND COMPANY (BID ID -3358904)
BANERJEE ENTERPRISE (BID ID -3358657)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .