SPECIAL REPAIR TO CERTAIN FENCING, ROADS, OTM BUILDINGS AT SK RANGE AND REPAIR/ REPLACEMENT AND RELAYING OF CERTAIN SEWAGE LINES AT VARIOUS LOCATIONS AT AF STATION HALWARA UNDER GE (AF) HALWARA

Amount

Demolition of Brickwork or PCC block built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe 150mm dia pipes complete all as specified and directed by Engr-in-Charge.

Material and labour for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius in half brick thick built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of Vitrous china bowl urinal flat back, size of 465 x 355 x 265mm half stall white (minimum) with grating and union for discharge pipe (excluding flushing sistern, flush pipe and waste pipe) complete all as specified and directed by Engr-in-Charge.

Supply and fixing of PVC (SWR) pipes single socketed, in any length with rubber ring joints, step clamps, including all fittings (Any type of "T"/tee, bend, Y, Branch piece single/double, couplers, reducers, vent coil, access door, junction single/double, equal/unequal, any type of trap etc), 110 mm dia, fixed to walls/floor/trenches etc and height of buildings upto G+1, including taking down and excavation in trenches for pipes, complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing to drain pipe and haunching against sides of pipe for 110mm dia pipes complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed by Engr-in-Charge.

Material and labour for Precast cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for mild steel bars 10mm dia and over TMT bars cut to length bent to shape reqd including cranking, bending spirally for hooping for columns hooking bends and binding with including mild steel wire (annealed) not-less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engr-in-Charge.

Dismantling floor, path, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, including removing the debris out side the MOD land complete all as specified and directed by Engr-in-Charge.

Material and labour for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 using (12.5mm graded stone aggregate) in floor finishes even to receive floor tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for Non skid jointless cerermic coloured tiles 7 to 8 mm thick of (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed by Engr-in-Charge.

Material and labour for coloured Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

Material and labour Glazed ceramic coloured tiles 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Supply only integral water poofing compound complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description, thickness including dado, raking out joints hacking for key scrubbing down with water etc fcomplete all as specified and directed by Engr-in-Charge.

Material and labour for 15mm thick plaster in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished surfaces fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick putty coating complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old plaster surfaces of wall and applying two coats of exterior acrylic emulsion paint in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new plastered or unplastered surface of wall and applying three coat of white wash complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of old decorated plastered and unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots applying three coats of white wash of wall complete all as specified and directed by Engr-in-Charge.

Material and labour for prepration of plastered or unplastered old surfaces and applying two coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of chromium plated brass Stop valves/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,15mm dia complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

Supply and fixing of PVC door frame of size 50mm x 47 mm made our of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification 7 drawing complete all as specified and directed by Engr-in-Charge.

Supply and fixing of factory made solid panel PVC door shutter 30mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fritted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at sitee as per specification complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Aluminium handles cast type anodised 150mm long complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 150mm size extruded section aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed by Engr-in-Charge.

Supply and fixing of stainless steel grating 100mm dia over floor trap complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of 15mm bore stop cock fancy type chromium plated with long shank and cup concealed type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of 15 mm bore Bib taps cast copper alloy fancy type, chromium plated CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of 15 mm Pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of Orrisa pattern WC in ground floor vitreous china white of size 580mm x 440mm fixed in repair including provision of lime concrete bedding including breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of wash down water closet (Pedastal pattern) including seat cover and stainless steel water jet including connection to drain pipe (Outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of swivel shower with shower arm CP fancy type 15mm size of any colour complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of brass chromium plated tubular towel rail 20mm dia (D) type 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of vitreous china wash basin, counter sunk white flat back size 550mm x 400mm excluding taps, waste chain, waste pipe and plug and procelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand, fancy type piillar taps cast copper alloy chromium plated of 15 mm bor, waste coupling and waste pipe, (including corner type, if required) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipes with 1.25 mtr long flexible tube and ABS wall hook incl making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of PVC valve less syphonic action type flushing Cistern 10 Ltrs capaciy low level white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for granite (black) slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situation complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Taking up or down 32mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 32mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing of rotational moulded polyethylene water storage tank, including dismantling of water storage tank (cylindrical /vertical) with closed top hosited and fixed in position all as specified in SSR Part-I of 1000 Ltrs Capacity, including suitable brass float valves high pressure of with polythene float and fly nut complete screwed of iron pipe or PVC ferrule and fixed of size 20/25mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 500 Ltrs capacity Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing tank complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame of any description but exc 1.5 Sqm and not exc 4 Sqm complete all as specified and directed by Engr-in-Charge. Note :- The rates quoted are deemed to be included for cutting hold fasts for removal of chowkhats/ frames.

Supply and fixing of 1.25mm thick Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by Engr-in-Charge. Note :- Butt hinges shall be measured seperately as "Supply only" under respective items of this BOQ.

Supply and fixing of 40 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

Supply and fixing of factory made solid PVC moulded door shutter with partical board core, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm moulded PVC sheet on the front face and 2mm plain colour plain PVC sheet on back face and fixing in frame as per specifications and drawings complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or in partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including neccessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screw etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/ fixed type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, tower bolt 150mm long 1 No. hinge type B-21, 100 mm long 2 Nos, suitable handle 1 No complete all as specified and directed by Engr-in-Charge.

Supply and fixing of anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum abodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to existing window frame with C.P brass/ stainless steel screw @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handeles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces in vertical surfaces as dado/skirting etc complete all as specified and directed by Engr-in-Charge.

Material and labour for 10mm thick Vitrified ceramic tiles light shade matt finish (Square/Rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for 10mm thick Vitrified ceramic tiles light shade matt finish (Square/Rectangular) polished area of each tiles n. exc 0.36 Sqm as in skirting, dados/Vertical surfaces etcset and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for 20mm thick screed bed or bedding layer of mortar for laying floor finished in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Material and labour for 20 mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding edges etc and polishing complete all as specified and directed by Engr-in-Charge.

Material and labour for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey ceement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

Material and labour for 75mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) as in sub base finished even and fair surface without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for sand filling under floors or in foundation complete all as specified and directed by Engr-in-Charge.

Material and labour for 80mm thick Machine pressed precast concrete interlocking paver block (M-40 Grade) any shape and size confirming to IS 15658-2006 laid over sand cushioning complete all as specified and directed by Engr-in-Charge. Note :- Sand cushioning shall be measured and paid seperately.

Material and labour for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors including taking up or down of old GI/ steel tubing and connections including cleaning for re fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Material and labour for 20mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors including taking up or down of old GI/ steel tubing and connections including cleaning for re fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 20mm bore nipple suitable for HDPE water tank (Minimum weight 15mm/38gm, 20mm/45gm, 25mm/65gm) complete all as specified and directed by Engr-in-Charge.

Material and labour in replacement of 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Material and labour in replacement PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 75mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 110mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 100mm dia PVC (SWR) P or S traps complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of wash down water closet (Pedestal pattern) including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing of plastic water closet seat,black/ white, closed patttern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of stainless steel towel rail, 20mm dia, D type, 60cm long fixed with and including chromium plated brass screw and wooden /plastic cleat etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of Vitreous china urinal flat back, size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screwes pointing around urinal back including waste coupling and discharge pipe complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated or profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws ccomplete all as specified and directed by Engr-in-Charge.

Welding in repairs of exc 2.5 cm but n exc 5cm in length and the thickness of metal to be welded exc 6 mm but n exc 9 mm patch work of defected angle, tee, channel, flat iron section as in existing arrangement on traverse of blast pens for holding IR net including fixing, tighting of GI wire and making it fully serviceable for operation complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of steel rolling shutters with ball bearing, guide channel as specified including top covers anchoring rod, hasp and staple and one shop coat of primer erect in position as indicated complete push or pull or manual type having thickness of laths 1.00 mm including taking down/ dismantling of unserviceable rolling shutter complete all as specified and directed by Engr-in-Charge.

Material and labour for repairing gear operated, manual operated, rolling shutter and iron door after welding, straighting, easing, adjusting, greasing and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

Supply and fixing of hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, balusters noising to steps including embeeding in concrete and screwing arc wind ties for roof including securing bolts posts and struts in fencing including cutting top to shape as directed, drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc ) including all necessary drilling,bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wih 2mm dia barbs at 75mm spacing and stranining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or pins etc. (each line wire to be measured) complete all as specified and directed by Engr-in-Charge.

Restraining and securing including making good staples etc. Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wih 2mm dia barbs at 75mm spacing and stranining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. (each line wire to be measured) complete all as specified and directed by Engr-in-Charge.

Repairs to pot holes of any depth, area not exc 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth and making good by applying a tack coat with VG-10 bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (VG-10 bitumen) 9.80 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with compressor to remove all loose dirt etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for applying evenly a priming/ tack coat of paving bitumen (VG-10) on existing bituminious surfaces at the rate 5 Kg per 10 Sqm complete all as specified and directed by Engr-in-Charge.

Material and labour for Premix bituminous macadam laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using Paving bitumen (VG-30), binder content @ 4.0% by weight of total mix (Preparation of surface and priming/ tack coat shall be measured and paid separately) and compacted with 8 to 12 ton power roller and compacted required camber and gradient complete all as specified and directed by Engr-in-Charge.

Material and labour for laying Bituminous premix Semi dense asphaltic concrete 30mm thick consolidated thickness with paving bitumen (VG-30), binder content @ 5.5% by weight of total mix, including supply and mixing of filler (OPC Cement) as per design mix spread using mechanical senser paver rolled and compacted with 8 to 12 ton power roller and compacted required camber and gradient shall be made on plus side complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes ,arrow etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting for soft/loose soil complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete 1:3:6, type C-2 (40mm graded stone aggregate) as in concrete bed for 150 mm drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engr-in-Charge.

Supply and fixing of 150mm dia reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:4:8, type D-2, using (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work built in cement mortar (1:6) with old size sub class ‘B’ bricks straight or curved on plan exc 6m mean radius complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 15mm thick on external surfaces of brick or concrete wall surfaces in cement motar 1:4 mixed with water proofing compound at the rate of 3% by weight of cement and surfaces finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- WPC shall be mesarued and paid under relevant items.

Material and labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping including use of form work and finishing complete all as specified and directed by Engr-in-Charge.

Returning filling including spreading levelling watering and well ramming not exc. 25 cm thick soil and getting out complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil), n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point all as directed by the Engineer-in-Charge.

Material and labour for cutting holes in brick walls in mud mortar for inserting MH pipe and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required exc one brick but not exc two bricks complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete type B-2, 1:2:4 (40 mm graded aggregaet) in surface channel and drains complete all as specified and directed by Engr-in-Charge.

BEHL AND COMPANY (BID ID -3270078)

BRIJ MOHAN LAL AND CO. (BID ID -3270061)

M/s Balvinder Singh Engineer and Contractors (BID ID -3271225)

M/s Kataria Construction Company (BID ID -3271122)