C/O Ayurvedic Helath centre at Kujabalh in Tehsil Dharampur Distt. Mandi (H.P)

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 99.53 cum (Ninety nine decimal five three) cubic metre @ Rs. 300/- (Rupees Three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Earth work in excavation for all type of structures such as retaining walls, Breasts walls,culvrts, drains, Parapets, Etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in drains and channels etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.

Providing and laying in position cement concrete of specified grade mechanically mixed cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten) graded crushed stone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor height excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast walls with 110mm (One hundred ten millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete up to all height as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated design mix M-20 (twenty) grade cement concrete for reinforced cement concrete for all work above plinth level upto all floor level,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated design mix M-20 (twenty ) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete 1:2:4 (one cement : two coarse sand : four graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) in mouldings as in cornices, windows sills etc, excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying FE-500D of Tata Tiscon, Sail, JINDAL, RINL, PANTHER & (JSPL) Shyam steel make for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto all floor evels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:4( One cement: four coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Square rubble masonry with hard stone in foundation and plinth including raking out joints uwith cement mortar (1:6) (One cement : six coarse sand) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : Twelve graded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six sand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 19mm thick ( ninteenmilimetre) made of action teasa thick terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories as per detail architectural drawing No. 195/1 to 199/1 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 35 mm thick MDF flush shutter with 1 mm thick lamination on both sides of approved shade in Marino laminates or green ply with edging in frames of 1st class deodar wood for doors including bright finished/ back enamelled iron butt hinges with neccessary screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 65x35mm. special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing XL-C alumiunum 1001 door closer, silver prime including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts anodized transparent or dyed colour shade with necessary screws to required of approved quality with necessary screws etc. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing aluminium tower bolt barrel type anodized transparent or dyed colour shade with necessary screws to required of approved quality with necessary screws etc. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

250(Two hundred twenty five millimetres)

150 (one hundred fifty millimetres)

Providing and fixing aluminium handles anodized transparent or dyed colour shade with necessary screws to required of approved quality with necessary screws etc. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

125mm (one hundred twenty five millimetres)

100 mm (one hundred millimetres)

Providing and fixing AISI-Grade stainless steel floor door stopper ISI marked (anodic coating not less than grade AC10 (ten) as per IS:1868) transparent and dyed to required colour and shade with necessary screws etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (hundred millimetre) stainless steel hard drawn hooks and eye complete with all floor level including entire carriage of materials upto all leads and lifts. The rates are inclusive of royality, GST or other taxes imposed by the Government

Providing and fixing 6 (Six) millimetres thick false fiber cement bonded ceiling board including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing railing for ramp having balluster of 25 mm dia, hollow M.S pipe (ISG-18) gauge with a clear height of 75 & 90 as per detail @ 60 cm C/C jointing in CC steps and jointed with electrical gas welding at top alogwith hand rail of hollow M.S. pipe with slip resistance 50 mm dia (ISG-18) vertical balluster welding or jointed with each other with 2 Nos. MS.S flat of 50x5 mm coplete and applying coating with red lead paint including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing MS railing for stair case having balluster of 19mm x19mm square bar with a clear height of 85cm embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint as per drawing specification including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etcetera with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain grill as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing 40x3 (Forty into three millimetres) flat iron hold fast 40(Forty) centrimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushed stone aggregate 20(twenty millimetres) nominal size including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm ( twenty five millimetre)dia and brackets of first class deodar wood (actuallenght) of rails of be measured including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying Precast terrazzo tiles hydraulic compressed 20 mm ( twenty millimetre thick )with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty five millimetre) average thickness of cement mortar 1:6 (1 cement:6 sand ) jointed with neat cement slurry mixed with pigment to match the incliding rubbing and polishing complete with tiles including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Precast terrazzo tiles hydraulic compressed 20 mm (twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm ( thirty five centimetre) in height on 10 mm (ten millimetre) thick cement plaster 1:3 (1 cement :3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 25mm (Twenty five millimetres) thick kota stone 55x55cm (Fifty five into fifty five centimetres) minimum size flooring mirror polished finshed of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying Kota stone slab 25mm (Twenty five millimetres) thick in risers of steps skirting dado and pillars laid on 12mm (Twelve millimetres) ( average ) thick in cement mortar 1:3 (One cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match of the shade of the slab including rubbing, polishing and mirror finish complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying antiskid digital vitrified spartic ceremic tiles Ist qualityof Kajaria, Nitco, Somany, Orient, RAK, Jonshan & Jonshan in flooring 300 x300x8mm. (three hundred into three hundred into eight milimeters) size in skirting base of cement 12 mm mortar 1:3 (1 cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete.ement mortar 1:3( one cement: three sand) finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying antiskid digital vitrified spartic ceremic tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan 300 x300x8mm. (three hundred into three hundred into eight milimeters) size in skirting base of cement 12 mm mortar 1:3 (1 cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete.ement mortar 1:3( one cement: three sand) finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 20mm ( Twenty milimetres ) thick white makarna marble work ( Table rubbed and polished ) in flooring 20mm ( Twenty milimetres ) thick Which shall be mirror polished in flooring tread of steps, landings mirror polished of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing white/ coloured Glazed tiles Ist quality 300mm to 400 mm ( three hundred millimetres to four hundred millimetres) thick in skirting risers of steps and dado 12 (Twelve) millimetres thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry of make KAJARIA , Nitco, Somani, Johnson including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 40( forty) millimetres thick Cement concrete flooring 1:2:4 (one cement : two sand: four graded stone aggregate 20 (Twenty) millimetres nominal size laid in one layer finished with a floating coat of neat Cement including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing as per structure design through profile coloured quoted high tensile steel zink allimimun alloy coating sttel roofing with trapezol corrugation of maxium ptich 90( ninety) millimetres centre to centre and minium depth of 30mm ( Thirty millimetres) with returned LEG and sealant groovs for proper sideoverlap single sheet to be provided up to 10 Mtrs ( Ten millimetres) from ridge to eves for avoiding ends overlaps and fixing of sheet be with self drilling and self tapping galvanised or zink alloy coated fasteners of size 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EPDM seal complete with all accesories as required as per direction of Engineer-in-Charge in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing valleys 60cm (Sixty centimetres) overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing flushing 38cm (thirty eight millimetre)overall with 0.60mm ( zero point six millimetre)thick prepainted steel sheet in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 2(two)microns over 5(five) microns primer coating Plus back coat of polyster of 5(five) microns over 5(five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted GI limpet and bitumen washers complete with all accesoriees including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing M.S. BP Sheet 1.66 mm to 2.00 mm (One point six six to two Millimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely). including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15(Fifteen) millimetres wide 45(forty five) millimetres overall semicircular plain GI sheet gutter with iron brackets 40X 3(forty into three) millimetres size bolts and nutts and washers etc including making necessary connections with rain water pipe complete as per design in 0.63 mm ( Zero point six three millilmetres thick sheet , including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592) for rain water pipes of working pressure not less than 4.00 kg/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC plain bend complete PVC Finolex/ Supreme pipe working pressure not less than 4.00 (four pointzero zero) killogramme per square centimetre confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC plain shoe complete PVC Finolex/ Supreme pipe working pressure not less than 4.00 (four pointzero zero) killogramme per square centimetre confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing high pressure PVC spigot and socket, waste and vantilating pipe 110 mm (one hundred ten) millimetres dia. of Finolex makeworking pressure not less than 4.00 (four pointzero zero) killogramme per square centimetre confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC plain bend complete PVC Finolex/ Supreme pipe working pressure not less than 4.00 (four pointzero zero) killogramme per square centimetre confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Steel work welded in built up sections, made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura). trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In trusses and trussed purlins in building complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections made of TATA ,in In grating, framed guard bars ladders, railing brackets and similar works , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing standared steel section door, window, clerestory window frame manufactured from ISMC Channel section 75X 40 (Seventy five into forty) Millimetres with MS flat 75x4 (Seventy five into four) Millimetres in combination including hinges Jamb, beed, lungs, with with split end tails to each jambs including steel butt hinges 2.5(Two point five) Millimetres thick with provision for locking arrangement and shock observer as specfied and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing windows and ventilators shuters having style of Z-section with T-section of 25x25x3mm and angle iron 25x15x3mm as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete as per approved specification/design including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Openable windows.

Fixed windows.

Providing and fixing steel wire gauge shutter in Z-section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia 0.56mm for doors, windows and clerestory windows with metal beading of approved quality and shape -section with necessary screws and applying a coat of primer with red lead paint complete as per approved design including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing M.S.fan clamp type -1 (One)of 16( Sixteen) millimetres dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter of ( ASAIN/NEROLAC/ICI-DULUX ) make pto all floor levels complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface throughly cleaning oil grease, dirt ,dust and other foreign matter and sand papering and knotting with ready mixed paint brushing primer pink of ASAIN/NEROLAC/ICI-DULUX make for enemal upto all floor levels complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, coarse sand papering and stopping with readymixed paint white ( ASAIN/NEROLAC /ICI- DULUX ) complete including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.

6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three sand) upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing glass reinforced concrete (GRC) cladding (of approved shade and texture) of unistone or its equivalent made from portland cement Alkelly Resistant glass fiber UV resistance synthetic in inorganic Pigment combined with the range of Chamical additives. The plaster in the cladding portion shall be done only when the cladding is to be provided. The Unistone 12 (Twelve ) millimetres Cladding on RCC Surface side as on faces on arch masonry wall etc. on 12(Twelve)millimetres thick cement plaster 1:3 ( one cement : three sand) and jointed with cement slurry i/c scafolding etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying one coat of Acrylic primer of ASAIN/NEROLAC/ICI-DULUX make coat on newconcrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint of ASAIN/NEROLAC/ICI-DULUX make to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc upto all floor level in all heights including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer upto all floor level in all heights including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent onundecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc upto all floor level in all heights including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Making plinth protection 50 mm (fifty millimetre) thick cement concrete 1:3:6 ( one cement : three sand : Six graded stone aggregate) 20 mm ( twenty millimetres) nominal sizeincluding entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15(fifteen) millimetres nominal bore to wall ceiling and floor galvanised mild steel tubes ( heavy grade) made of B.S.T., Jindal (Hissar), Tata Steel Tubes Ltd., Prakash Surya tube fitting and clamps including making good the wal, ceiling and floor including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying in trenches galvanised mild steel tubes 20 mm (Twenty milimeter) JINDAL(HISAR)/ TATA STEEL TUBE LTD ( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Making connection of galvanised steel distribution branch with galvanised mild steel mian 20 to 40 (Twenty to forty )millimetres bore by providing and fixing tee including cutting as threading the pipes complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 20(Twenty) millimetres nominal bore water mete stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and sto-cock to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing vitreous China wash down,water closet Orrissa Pattern squatting pan (Indian type W.C pan) size 580 (Five hundred eighty)mikllimetres PARRYWARE /CERA/ HINDWARE/ SANITARYWARE (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing vitreous China wash down,water closet Anglo indian universal (European type. W.C. pan) CERA /HINDWARE / SANITARYWARE with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 10.0/12.50/15.00 litres vitreous china low level flushing cistern made of Hindware (Slimline), Hindustan, Cerawith a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately.) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing G.I inlet connection for flush pipe with W.C Pan including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing plastic seat (Solid / Hollow type) made of Hindware, Cera and cover for wash down water closet with C.P. Brass hinges and rubber buffers including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing flat back 630mmx450mm (six hundred thirty into four hundred fifty millimetres) vitreous china wash basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings of Hindware/Parryware /CERA, Sanitary ware make including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings ORIENT/ PARRYWARE/ CERA/ HINDWARE /NEYCER/SANITARYWARE including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Extra over item No. 66 for a pair of holes for pillar taps instead of single hole including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing stainless steel kitchen sink of approved quality ( Paryag polymers/Diamond/ DIAMOND, make with drain board and CP waste with CI or MS bracket painted white including cutting holes and making good the same but excluding of fitting 600 x 450 x 250 mm (Four hundred seventy into four hundred twenty milimetre ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C.P Brass chain 32 (Thirty two) millimetres dia and 50 (Fifty)centimetres long and rubber plug of following sizes for sink or wash basin including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP brass waste for wash basin or sink of Jaquar, Jal, ESS make 32 ( Thirty two) Millimetres dia including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing M.I. Union 32(Thirty two) millimetres dia UNIK / KS /AMCO / AVR / NVR /RR / SUW for wash basin or sink including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C.P. Brass S. Trap 32(Thirty two) millimetres dia for wash basin or sink of Jal, ESS, Modi including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing sand cast iron grating for gully, floor or Nahni trap of approved quality and colour 100 mm (one hundred millimetre) nominal dia including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror Atul, Modi Guard ( Golden fish ) of superior glass mounted on plastic sheet and fixed plastic plug with C.P. brass screw and washers including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP brass towel rail No. 1581 with CP brass brackets fixed to wooden plugs with CP brass screws of Jal, ESS, Setko, Modi including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 600mm x 120 mm (six hundred into one hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing toilet paper holder No 1533 of Jaguar/ESS-Ess in C P Brass including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing chromium plated brass liquid soap glass container JAL, ESS ESS. JAQUAR with CP brass lid and brackets fixed to wooden plugs cleats with CP brass screws etcetera complete including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Drainage board vitreous china size 650mm X 450 mm JAL, ESS ESS. JAQUAR with CP brass brackets fixed to wooden cleats with CP brass screws etcetera complete including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C.P brass shower rose 150 (One hundred fifty)millimetres dia with 15(fifteen) millimetres or 20 (Twenty) millimetres inlet including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP brass bib tap 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP Brass pillar tap with capstan head 15mm (Fifteen millimetres) dia of Jaquar JAL, ESS ESS. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15(Fifteen) millimetres nominal size CP brass Stop Cock of Jaquar, Jal, ESS ESS make with flange including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP. brass angle valve of JAL JAQUAR / ESS / SEIKO make of 1515(Fifteen) millimetres without Nuts and pipe. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Mixer made of JAQUAR brand for kitchen sink with casted swinging spout at top including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing two hole basin mixing Faucet including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing PVC connections pipe with brass unions 45 (forty five) millimetres length 15 ( fifteen) millimetres nominal bore including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing brass full way valve with wheel Kingston,Gem, Parko, Techno,Jal,ESS ESS jaquar Seiko make including carriage with in all leads and lifts and as per direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15 mm nominal bore.

20 mm nominal bore.

Providing and fixing 15 mm (fifteen) millimetres dia G.I. M.I. Union of unik, KS, AMCO, AVR,NVR,RR,SUW make including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15 mm (fifteen) millimetres dia

20 mm (fifteen) millimetres dia

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

1216 (16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))

1620(20 mm O.D. pipe)(One thousand six hundred twenty(twenty millimetres outer dia pipe))

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. (Equal tees).

1216(One thousand two hundred sixteen)

1620(One thousand six hundred twenty)

Reducing tee.

1620 (One thousand six hundred twenty) to all branches

Female branch Tee.

1216x1216x15 (One thousand two hundred sixteen into One thousand two hundred sixteen into fifteen) millimetres thread

1620x1620x20 (One thousand six hundred twenty into One thousand six hundred twenty into twenty) millimetres thread

Female elbows

1216x15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Male thread connector

1216xx15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Female thread connector

1216xx15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Couplers

1216 (One thousand two hundred sixteen) millimetres

1620 (One thousand six hundred twenty)millimetres

Reducers

1620x1216 (One thousand two hundred sixteen into One thousand six hundred twenty)

Providing and fixing PVC water storage tank 1000 made of sintex brand (one thousand) litre net capacity tank of Sintex three ayer make (I.S.I. 12701 marked tripple layer) G.I. inlet or out let connection15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. (Equal tees).

1216(One thousand two hundred sixteen)

1620(One thousand six hundred twenty)

Reducing tee.

1620 (One thousand six hundred twenty) to all branches

Female branch Tee.

1216x1216x15 (One thousand two hundred sixteen into One thousand two hundred sixteen into fifteen) millimetres thread

1620x1620x20 (One thousand six hundred twenty into One thousand six hundred twenty into twenty) millimetres thread

Female elbows

1216x15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Male thread connector

1216xx15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Female thread connector

1216xx15 (One thousand two hundred sixteen into fifteen) millimetres thread

1620x20(One thousand six hundred twenty into fifteen)millimetres thread

Couplers

1216 (One thousand two hundred sixteen) millimetres

1620 (One thousand six hundred twenty)millimetres

Reducers

1620x1216 (One thousand two hundred sixteen into One thousand six hundred twenty)

Providing and fixing 110 mm x 90 mm (one hundred ten milimeters into ninety millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. marked of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and vantilating pipe 110 mm (one hundred ten) millimetres dia. of Finolex make including fixing with aproved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm dia (one hundred ten milimeters) PVC door bend with oval access door made of Finolex insertion rubber washer 3 (three) millimetres thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing made of PVC Finolex collers ISI marked including fixing with approved adhesive etc. Complete including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PVC Finolex clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.110 (one hundred ten ) millimetres dia including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PVC cowl 110 (one hundred ten ) millimetres made of Finolex including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing anf fixing 32mm nominal bore PTMT urinal waste made of Jindal coupling of approved quality and colour including carriage of material through all modes of transportions with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing grab bar C.P 40 mm (forty millimetre) diametre steel pipe at 78 cm height with M.S plate complete a including carriage of material through all modes of transportions with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing stoneware gully trap grade 'A' 150mmx100mm size Por R type complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C.I cover with frame of 300mm x300 mm size (iside) the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72 kg. including carriage of material through all modes of transportions with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing 1.5 (one point five) meter tube PTMT jet spray made of Prayag of approved quality and colour complete including carriage of material through all modes of transportions with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Supplying cast iron cover without frame for manholes for frames of internal dimension 455 to 610 ( Four hundred fifty five into six hundred ten) millimetres rectangular C.I.cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg(twenty three Kilogramme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

HANS RAJ CONSTRUCTION COMPANY

AJAY KUMAR