TOKEN NO. GE/K-44/2024-25 - REPAIR/REPLACEMENT OF FLOORING, PLUMBING, SANITARY FITTING AND ALLIED WORKS AT DRAS UNDER GE KARGIL

Amount

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises., complete all as specified and directed by Engr-in-Charge.

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick, plain cement concrete, type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick plain cement concrete type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor complete all as specified and directed.

M & L for Joint free Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:4, complete all as specified.

M&L Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M & L for endura tiles, heavy duty type of size 300x300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade completed all as specified and as per direction of manufacturer instuctions / Engr in charge.

M & L for Coloured Glazed ceramic tiles of size 300x450x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed.

M & L for chequered cement concrete tiles 30x30x25mm thick with grey cement and pigment and set jointed and pointed in neat cement slurry as in floor over 20 mm thick sreed bed or bedding layer in CM 1:4 complete all as specified and directed.

Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed . (Note- Sand cushion measured and paid seperately).

M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr in charge.

M & L for granite work (table rubbed, polished and moulded) 18-20 mm thick as in steps,jambs, pillars, plateforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding and polishing over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed

Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed

Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed

M&L for 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M&L for 25mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete.

M&L for precast cement concrete type C1 1:3:6 (using 20mm graded aggregate) block masonry with soild block, exc 10cm width and setting in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge.

M & L rendering 15 mm thick in CM 1:6 on other fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of Oil bound emulsion paint over a coat of primer complete all as specified and as directed

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

S&F in repair 10 ltr PVC valveless,syphonic action type , flushing cistern , low level,white , with inlet , ball valve , float and handle incl brackets complete all as specified.

S&F in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete.

S&F in repair 15mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed complete.

S&F in repair CP health faucet with 1 meter flexible hose and stand all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore Pillar taps cast copper ally, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete.

S&F in repair 15 mm CP wall mixture with telephonic shower mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15 mm CP centre hole basin mixture, mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-in-Charge

S&F in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified.

Dismantling water storage tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed.

Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and as directed

Supply and fixing puf tank of capacity 500 ltrs capacity and including 75 mm thick puf insulation complete all as specified.

Supply and fixing puf tank of capacity 1000 ltrs capacity and including 75 mm thick puf insulation complete all as specified.

S&F in repair Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to pors trap with integral foot rest but excluding flushing cistern and flush pipe including placing in position complete all as specified

S&F in repair vitreous china wash hand basin white counter type 570x450mm fixed on granite slab incl waste pipe, cutting for erecting granite slab, complete all as specified.

S&F in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified by Engr-in-charge

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and incliding white plastic water closet seat cover with mild steel CP or aluminisied hinging device complete all as specified and as directed by Engr-in-Charge

Note : Deduction for amount of Rs 14,555.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S TRADE LINK (BID ID -3199460)

M/S BHAT ENGINEERS (BID ID -3198888)

M/S Ghulam Mustafa (BID ID -3204550)

M/S DUTTA ENGINEERING WORKS (BID ID -3198309)