Patchwork, Painting and providing newhoisting mechanism for offtake shutter of enadimangalam distributary at ch-36890m of RBMC

Amount

Dismantling old shutter, and its hoisting mechanism- Supply Fabrication erection of new embedded parts and allied civil work etc.

OD21997/2022-2023:Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges.

OD19991/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the sameand stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by thedepartmental officer at the site.(weight of the unserviceable shutters and embedded parts may be calculatedas 60% and unserviceable hoisting units as 80 % )

OD22729/2022-2023:Scaffolding with first quality bamboo ( 1 score =20 number), tied with heavy duty coir for easy access to demolishing concrete,As per the directions of Departmental officers at site

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD21992/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD21991/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21990/2022-2023:Supply of MS round bar including cost of conveyance charges

OD19984/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply, Fabrication , Painting & erection of Hoisting units, Patchwork and painting in existing shutter

OD21994/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD21993/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21998/2022-2023:Supply of MS round bar including cost of conveyance charges

OD20095/2022-2023:Patchwork of mechanical structures and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD19986/2022-2023:Fabrication of Structural steel canal shutters ( Up to 2 tonne weight )/ Hoisting bridge/ Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD19988/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance chargers complete as per approved specification or drawing.

OD19989/2022-2023:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of MS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD19990/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform< including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supply and fixing of Nut hoisting mechanism including bend checking and correctness of Screw rod and conducting trail run etc.

OD19980/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of all materials labor etc complete

OD20096/2022-2023:Bend checking and correctness of existing EN-8 screw rod and accessories as per approved specifications, and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD19982/2022-2023:supply the M.S bolt and nut

OD19983/2022-2023:Trial run the gate with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction of departmental officers in charge.

Greasing and oiling in existing hoisting mechanism,reduction gear box and screw rod etc . of Poothankara Cross shutter Ch-39296m of RBMC

OD21988/2022-2023:Overhauling and Greasing of the hoisting mechanism , reduction gear box, screw rod, Plummer block etc. and ensuring safe working safe working ,Providing new handle, Dismantling and erecting hoisting mechanism after overhauling including conveyance of materials, tools etc. and conducting trail run.

GEO THOMAS

Bidder Name

GEO THOMAS

Excellent