Construction of Theater cum Tribal themed near Chingus Fort

Acoustical Wall waneline (N.S) Wooden acoustical wall paneling (G.I Framing) Providing and fixing GI frame work for wall paneling as per design drawing consisting of floor channel of size 50x32x32x0.5mm thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw. Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The framework to be filled with 50mm 1000GSM non-woven thermal bonded polyester wadding (CEILOTECH/Armstrong/Hunter Douglas.) held in position with 18 mm GI chicken mesh of 24SWG with drywall screws and oversize washers. Finally fixing over it horizontally 80x26x51x0.5 mm thick G.I. ceiling section placed @600mm C/C or wherever required as per design drawings with drywall screws and angle cleats 27x37x25x1.6 mm as required. The frame to be fixed to the walls by means of angle holdfasts or cleats of required size complete with expandable anchor fasteners of 65x10mm dia fixed on each vertical member @1000mm C/C etc. as required all complete as per the directions of Engineer-in-Charge. WOODEN ACOUSTICAL PANELING Tongue & Groove Wooden Acoustical Panels of size -192 X 2440 X 16 mm Linear perforation (NRC 0.7). The Wooden Panel made of a High Density Fiber Board (HDHMR) Substrate with Pre-Laminated/HPL facing as per the approved Shade/species and finish and a Melamine balancing layer over the reverse side. The density of HDHMR board should be more than 800kg/m3. The HDHMR board should be passed through vertically flammability test (UL94) & should be tested as for AntiFungal) with the help of special design Z clip as per Drawing and Design would be fixed on Aluminum Channel of size 15x25x19x7.70mmx3000mm.[Leaping & Beading for corner and other finishing will be paid extra] Make: CEILOTECH / Armstrong / Hunter Douglas.

WOODEN FALSE CEILING (0.80 NRC) Providing and fixing wooden false ceiling tiles of size 595x595x18mm made of 6mm perforated HDMR Board backing 12mm thick sound insulation on lay in grid exposed ceiling @1.75kg.tile enhance the noise reduction coefficient to 75 NRC. T-grid should be width 24mm wide T sections i.e., the Main runner 3000mm in web height of 32mm, 1200mm & 600mm cross tee in web height of 25mm.WOODEN FALSE CEILING (0.80 NRC) Providing and fixing wooden false ceiling tiles of size 595x595x18mm made of 6mm perforated HDMR Board backing 12mm thick sound insulation on lay in grid exposed ceiling @1.75kg.tile enhance the noise reduction coefficient to 75 NRC. T-grid should be width 24mm wide T sections i.e., the Main runner 3000mm in web height of 32mm, 1200mm & 600mm cross tee in web height of 25mm.INSTALLATION — To comprise main runner spaced at 1200mm centers. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module. Cut cross tee longer than 600mm require independent support. 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x24x24mm, secured to walls at 450mm maximum centres and as per the drawing and the work complete in all respects to the satisfaction of Engineer-in-charge.

Providing & Fixing of Flocked textile floor of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be make with 100% Nylon and completely water proof resilient backing. The flooring should be thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. It should achieve the Eurofins Comfort Gold Certifications. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr. The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, with resilient waterproof backing, anti allergic. The carpet should have permanent static contro. The work should be carried out by the authorized installer of the Company in India. Carpet should be laid on zero leveled surface. Carpet should be stick with SR 998 on the floor etc. all complete as directed by Engineer-in-charge. ISO Certificates: 14001:2015, 9001:2015, 45001:2018 Handwritten note: 400 ft²

Taking out door shutters including chowkhat

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (two or more coats) on new steel work.

Providing and fixing of Air Conditioner of approved quality as directed by incharge Engineer Complete Job

Providing and fixing of 75 Inch LCD like Sony ,Samsung etc Complete Job

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick