Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC PREM SAROVAR HOTEL NAINITAL 263 001 UTTARAKHAND | NAINITAL | UTTARAKHAND | 263001 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹7.3 L+₹73,866.50 (11.3%)Rejected-Finance | L2 | Rejected-Finance Not being L1 |
Tender Value
₹6.5 L
EMD Value
₹13,100
Closing Date
10 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I)(AF) BHOWALI
BHOWALI, NAINITAL
PROVISION OF CERTAIN MINOR WORKS AT AF STATION BHOWALI.
2022_MES_562597_1
8043/E8
Open Tender
Civil Works
Item Rate
180 days
BHOWALI
REF TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
AGE(I)(AF) BHOWALI
₹13,100
6 Apr 2023
11 Nov 2022
13 Dec 2022
11 Nov 2022
10 Dec 2022
27 Nov 2022
11 Nov 2022 - 26 Nov 2022
Amount
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil and etc complete all as specified and as directed
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. orfor shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick etc complete all as specified and as directed
M&L Hard core of gauge not exceeding 63 mm, deposited, spread and levelled in a layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors/pathway/hardstanding finished even and fair to receive top finish complete all as specified and directed by Engr-in-charge.
M&L cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate as in bed of the drain pipes including packing under and hunching against side of pipes after they are laid and tested complete all as specified and directed for 150mm dia pipes. (pipe will be measured separately)
M&L Salt glazed stone ware drain pipes 150mm dia graded 'A' laid in trenches, jointed and tested complete all as specified (Excavation earth work and bedding shall be measured separately) complete all as specified and directed
Returning, filling in (soil), including spreading, leveling, watering & well ramming in layers not exceeding 25 cm, complete all as specified.
Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
M&L brick work with sub class B old sized bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L rendering 15mm thick in cement plaster 1:4 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed
M&L rendering 15mm thick in cement plaster 1:6 on fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed
M&L precast cement concrete (1:2:4) type B-1 (using 20mm crushed stone aggregate as in Manholes cover slab all as directed (reinforcement shall be measured and paid separately) Set in Cm (1:4) complete all as specified and directed
M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
Supply and fixing Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including connection to drain or out going pipe and to flushing pipe including Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed.
S&F PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets , PVC 32 mm 'L' bend complete all as specified.
S&F tubular steel trusses including special shape washers etc. including for columns complete using ERW or induction butt welded tubes confirming to IS -1239 -1997 GRADE ST-240 complete all as specified and directed by Engineer in charge
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engr in charge.
M & L for preparation of new steel surface over 10 cm in width or girth and applying two coast of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed
Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron) complete all as specified and directed
Supply and fixing Anodised aluminium powder coated of Approved colour,door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (Thickness or powder coating not less than 50 micron) complete all as specified and directed.
Supply and fixing Anodised aluminium powder coated of Approved colour, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Thickness or powder coating not less than 50 micron) complete all as specified and directed
Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
Supply and fixing Figured glass, pin head type and glazing for window/ventilators in squares n exc 0.5 sq. m in each pane complete all as specified and directed
S&F aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 700mm in width and of weightnot more than 35kg and fixed complete all as specified and directed
S&F Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm including complete accessories complete all as specified.
S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)
M & L for providing 75 mm thick cement concrete type-C-2 1:3:6 (using 40 mm grade crushed stone aggregate) as in plinth protection or similar wk complete all as specified and directed.
S &F for 3 mm thick and 38 mm wide glass dividing strips fixed as in floor etc complete all as specified & directed.
S&F 15mm bore CP Bib taps, fancy type, cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified.
S&F 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified.
S&F 15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
S & F vitreous china Urinal in white colour, half stall type with complete accessories Set, CP Waste Coupling, PVC waste pipe, urinal sprader etc. complete all as specified.
Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge
Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
S&F Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.
S & F PVC (SWR) Nahani trap 75 mm dia with grating including jointing with solvent cement
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge
Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge
Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer complete all as specified and asdirected by Engr-in-charge.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 all as specified and directed
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match complete all as specified and directed.
M&L for Plain cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregates) cast in situ in lintels upto 1.5 m span, cills and other similar bands, plinth course, parapets, coping, bed plates and the like including weathering slightly, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and as directed.
S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
Surface dressing n. exc 15 cm deep in soft/loose soil complete all as specified and directed.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Rough finished flat complete all as specified and directed.
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
Formwork to soffits of suspended slabs such as landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L Formwork to sides and soffits of floor or roof beams, Landing beams etc complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors and roofs n exc 20cm wide and similar work etc.complete all as specified and directed
Formwork to chajja incl edges complete all as specified and directed.
M&L for TMT bars 06 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L RCC M-25 (Design Mix) in foundations, filling and mass concrete ,Plinth beam and finished surface concrete flat complete all as specified and directed.
M&L RCC M-25 (Design Mix) in Columns, pillars, piers, posts and struts and finished conctrete surface flat complete all as specified and directed.
M&L for RCC M-25 (Design Mix) as in slab supported on walls, beams and column in floors, roofs, landings, balconies shelves etc and finished conctrete surface flat complete all as specified and directed.
M&L for cement concrete M-25 (Design Mix) in roof beams ,floor beam etc and finished conctrete surface flat complete all as specified and directed.
M&L for RCC M-25 (Design Mix) in Chajja and finished conctrete surface flat complete all as specified and directed
M&L for 40mm thick PCC cement concrete ,1 :2:4 with 12.5mm graded aggregate mixed with WPC as per manufacturers instruction as in DPC work complete all as specified and directed.
M&L for one coat of blown bituminous of grade 85/25 @ 1.50kg/Sqm over DPC complete all as specified and directed.
M&L for polythene film,50 micron laid on PCC surface in DPC complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 as in ceilings and finished even and fair without using extra cement complete all as specified
Supply only WPC
M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of primer after and one coat putty complete as specified
Three coats of white wash on ceiling after preparation of new surfaces complete all as specified and directed.
Treating the top surfaces of filled earth at the rate of 5 litres of emulsion/sqm as in floor/plinth protection complete all as specified and directed.
Treatment the back fill in contact with foundation at the rate of 7.5 litres emulsion on vertical surface 9 area of sub structure contact) complete all as specified and directed.
Treating the soil along with external perimeter of building at the rate of 2.25 litres/metre complete all as specified and directed.
Treatment the soil along under plinth protection complete all as specified and directed.
15mm thick cement plaster (1:3) with using WPC as in screed bed of roof slab (WPC shall be measured seperately) complete all as specified and directed.
Applying one coat of hot blown bituminous primer @0.40 kg per sqm on plastered surfaces complete as directed
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified and directed.
M&L for APP based polymeric membrane, 3mm thick(min), weighing 3.5 kg/sqm reinforced with polyster non wooven fabric matt weighing not less than 160 gms/sqm) laid on primed surface complete all as specified and directed.
M&L flooring with 100mm thk PCC (1:4:8 type D-2 using 40mm graded aggregate as in sub base and finished rough and fair complete all as specified and directed.
M&L flooring with 40mm thk PCC (1:2:4) type B-1 using 20mm graded aggregate and finished with extra cement complete all as specified and directed.
M&L for ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.
Ditto all as per item No.48 here in before but as in skirting/dado including 10mm screed bed in CM(1:3) com plete all as specified
S&F Aluminium section power coated of colour as approved openable sliding type three track window/ventilators with sliding shutter and frame with aluminium section of size including 5 mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed (i) Frame section 76.20 X 44.46 X 2mm (ii) Shutter top bottom and side rails 83.50 X 14.45 X 2mm (iii) Glass 5 mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc. complete (iv) Aluminium grill 7.5 mm dia design no. DG - 102 make DEDO grill or design no AL - 103 make fixed to aluminium section 50X20X1.5 mm in existing opening. (v) stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tacks or galvanized wire staples complete .
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M & L for Rubber moulding Machine presed precast interlocking paver block of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 GRADE with grewy cement and pigment set over sand cushioning as directed and specified by Engineer in charge
Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L PCC type C-2 1:3:6 (40 mm graded aggregate) cement concrete in foundation,filling and mass concrete complete all as specified and directed.
M&L 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces of wall and finished even and fair without using extra cement complete all as specified and directed.
M&L for prepration of new surfaces of plastered or unplastered surfaces and applying two coats of cement base paint over a coat of alkali cement primer as on walls complete all as specified and directed.
M&L 19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. complete all as specified and directed.
S&F of external teak wood lipping 6mm thick fixed with nails for 18/19mm block board or veneered particle board complete all as specified and directed.
M&L 2nd class hard wood plain fillets, square, rectangular or tringular in section, clean sawn secured with nails or brads, sectional area exc 3 & n exc 6 sq cm complete all as specified and directed.
5.Providing pre-cast cement concrete Type B1,1:2:4 with using 20mm graded stone aggregate as in shelves including chamfers,weathering etc and similar work and set in cxement mortar 1:6 complete all as specified and directed.
M&L 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed.
S & F of aluminium anodised powder coated of approved colour, sliding type two track window or ventilator with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame made of section size 92 X 31.75 X 1.30 mm as suitable for bottom, top and sides of window. (ii) Shutter for top, bottom and side rails 40 X 18 X 1.29 mm. (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips of suitable size, 4 Nos. aluminium hold fasts with each window and necessary handles, tower bolt etc. as directed.
M&L for power coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ,ventilators and partions (Fixed portion) with extruded built up standard tubular section /appropriate Z section and other sections of approved make conforming to IS 733 and IS : 1285,fixing with dash fasteners of required dia and size, incl necessary filling up the gaps at junction,i.e. at Top,bottom and sides with required EFDM rubber/neoprene gasket etc.Aliminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever required including cleat angle.aluminium snap beading for glazing/paneling,CP brass/stainless steel screw allcomplete all as specified and directed.
S&F of 4.80 mm thick sheet glass ,ordinary quality and size exc 0.50 Sqm and fixed to aluminium door shutter and partition wall by means of glazing clips rubber strips etc complete all as specified and directed.
M&L for aluminium composite panel sheet 5mm thick as in door complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of OBD over one coat of 3mm thick wall care putty and a coat of primer complete all as specified and directed.
M & L for point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FR-LSH cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in concealed PVC rigid non metalic conduit, including replacement of mild steel/pressed steel sunken box and outer sheet and provn of fixed concealed sunken box with inner & outer cover incl all screw,cup washer used to brass etc including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FR-LSH cable as earth continiuty conductor to common earth and connecting to earth dolly complete for light/Ceiling fan/Ex-fan point controlled by one 5/6 amps one way switch complete all as specified and directed. (Note: modular and normal Switch /socket and fan regulator deem to be measured and paid seperatly in respective items).
All as per item No 2.00 here-in-before but for socket point, 5 Amp 230 Volt on same board. Make- Finolex/Havells/Polycab/RPG
All as per item No 2.00 here-in-before but for one socket point outlet 3 Pin, 5 Amp 230 Volt on independent board. Make- Finolex/Havells/Polycab/RPG.
All as per srl item No. 2.00 here-in-before but for 3 pin 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge. Make- Finolex/Havells/Polycab/RPG.
S& F switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.
S&F Socket outlet 5 Pin 6 Amp 230 volts AC (ISI Marked) etc complete all as specified. Note:- Switch and socket shall be of same make.
S&F Socket outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC ncluding decorative frame cover etc complete all as specified. Note:- Switch and socket shall be of same make.
S& F switch piano flush type, 15 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.
S&F Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed by Engineer-in-Charge.
S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed by Engineer-in-Charge.
S&F batten holder of PVC / Polycarbonate type surface including 9W LED bulb etc complete all as specified and directed by Engineer-in-Charge.
S & F in replacement of sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm including cutting chasing and grouting PVC pipe concealed including Tee, Elbow, Bend etc and including 6.0 sqmm copper conductor single core wire connected by common earth all as specified. Including 20 mm dia PVC conduit, medium grade, ISI marked complete all as specified and directed.
S & F in replacement of sheet metal enclosure double door 8 way SPN DB (cAT PART No 607711 of Legrand or Cat part No A9HSND08 OF SCHNEIDER or C & S, 230 V with neutral and earth link and 200 rated bus bar complete made out of CRCA steel sheet factory made complete all as specified and directed. Make cat Pt No 854DD of SSK or equivalent Havells/ABB/Legrand.
S & F in replacement of sheet metal enclosure double door 4 way SPN DB (cAT PART No 607710 of Legrand or Cat part No A9HSND04 OF SCHNEIDER or C & S, 230 V with neutral and earth link and 200 rated bus bar complete made out of CRCA steel sheet factory made complete all as specified and directed. Make cat Pt No 854DD of SSK or equivalent Havells/ABB/Legrand.
S & F in replacement of MCB SPN 63 Amp, 230 Volt C curved, multi-breaking capacity not less than 10 KA with over load and short circuit protection, complete all as specified and as directed by Engr-in-Charge. MAKE- LEGRAND/L&T/SCHNEIDER OR C & S
S & F in replacement of MCB SP 5-32 Amp 240 V, 'C' Series, multi-breaking capacity of 10 KA with over load and short circuit protection, 1 module complete all as specified and as directed by Engr-in-Charge. MAKE-LEGRAND/L&T/SCHNEIDER OR C & S
S & F in replacement of sheet metal enclosure with two pin and earth plug and Socket with metal top 230 V with one single pole MCB of 20 Amp complete all as specified and directed. Make - SSK or equivalent Havells/ABB/Legrand.
S/F in replacement of LED batten fitting T-8 Retro LED 1 x 20 Watt, 6000K, 4' complete with decorative ultra ceiling square profile linear LED lighting fixture with extruded polycarbonate environment friendly,energy efficient complete with all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed by Engineer-in-charge. Make - Cat pt No LHEXARP7SN1W020 of Havells or equivalent to Bajaj/Crompton
S & F of LED bulk head fitting energy saving new generation 10W LED enclosed with poly corbonate cover 6000K with IP 65 protection, the system wattage of fitting should not be more than 5 watt ± 10%, surge protection of minimum 2KV power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 900 lumens, total input voltage range 140-280V AC, colour rendering Index should not be less than 80 complete incl electrical connection all as specified and directed. Make- Havells/Philips/C&S
S&F of water heater storage type, electrically operated capacity 03 Ltr BEE 5 star rated made with copper tank completed of water connection all as specified.
BHUWAN SINGH ADHIKARI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .