Construction Work for Civic Center (1) Bhojava and (2) Hasalpur From Viramgam Nagarpalika , Viramgam(2nd Attempt)

Name of Work :- Construction Work for Civic Center (1) Bhojava and (2) Hasalpur

From Viramgam Nagarpalika , Viramgam.

Memorandum showing items works to be carried out :

Item QuantitiesE Item Of Work Tendered Unit Total Amount

Item QuantitiesE Item Of Work Tendered Unit Total Amount

No. stimated Rate according to

Qty. In Figure estimated

Bhojava Civic Center

1 60.00 Excavation for foundation upto 1.5 m depth including sorting out and 117.08 Cu.Mt

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

2 53.00 Filling available excavated earth (excluding rock) in trenches. plinth, 130.39 Cu.Mt

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

3 4.00 Providing and laying cement concrete 1:4:8(1 cement :4 Coarse sand :8 2830.46 Cu.Mt

crushed stone aggregate 40 mm. nominal size) and curing complete

including the cost of form work in (A) Foundation and Plinth

4 9.00 Filling in foundation and plinth with murrum or selected brout for out 289.06 Cu.Mt

side soil in layers of 20 cm. thickness including watering, ramming and

consolidating etc. Complete.

5 1.00 Filling in plinth with sand under floors including watering ramming, 460.19 Cu.Mt

consolidating and dressing complete

6 4.00 Providing & laying in position controlled reinforced cement concrete 4397.50 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, (A) Foundations footing base of

columns and mass concrete.

7 2.00 Providing & laying in position controlled reinforced cement concrete 6255.26 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge,., (D) Coulmns, Pillars, posts and

strut upto floor two level.

8 2 Providing & laying in position controlled reinforced cement concrete 5330.55 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, (C) Ground beam / Plinth Beam

9 2.00 Providing & laying in position controlled reinforced cement concrete 5647.02 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, Slab Beam. Up to All Floor.

10 3.00 Providing & laying in position controlled reinforced cement concrete 5330.55 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge,. Lintal Up to All Floor.

11 1.00 Providing & laying in position controlled reinforced cement concrete 5770.69 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, CHHAJJAS Up to All Floor.

12 5.00 Providing & laying in position controlled reinforced cement concrete 5138.34 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, SLABS Up to All Floor.

13 1720.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 76.21 Kg

bending, binding and placing in position complete upto floor two level

14 9.00 Brick work using common burnt clay building bricks having crushing 4021.02 Cu.Mt

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

15 20.00 Brick work using common burnt clay building bricks having crushing 4295.99 Cu.Mt

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) for brick work in

superstructure above plinth level upto floor two level (B) Conventional

16 5.00 (i) Half brick masonry in common brunt clay building bricks having 589.32 Sq.Mt

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth for brick work in

superstructure above floor two level (B) Coventional (upto 10 ton)

17 31.00 Providing 10mm thick cement plaster in single coat on brick/concrete 115.81 Sq.Mt

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

18 74.00 Providing 15mm thick cement plaster in single coat on brick/concrete 157.17 Sq.Mt

wall for interior polastering up to floor two level and finished even and

smooth with n(ii) Cementmortar1:4 (1-cement :4-sand)

19 128.00 20 mm. Thick sand faced cement plaster {GUTKA} on walls upto All 300.66 Sq.Mt

height above ground level consisting of 12 mm. Thick backing coat of

c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of c.m. 1:1

(1 cement : 1 sand) etc.

20 28.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 1397.83 Sq.Mt

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for antiskit

21 10.00 Providing and laying Single side mirror polished Black Granite stone 1993.74 Sq.Mt

slab 18 mm (Average) thick of approved quality incl. full moulded

round front edge fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete.

22 105.00 Distempering (Two coats) with oil bound washable distemper of 117.43 Sq.Mt

approved brand and manufacture and of required shade on wall /

ceiling surface to give an even shade over and including a primer coat

with with alkali resistance primer of approved brand and after

thoroughly brushing the surfaceto give an even shade after thoroughly

brushing the surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth for

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats

of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth.Completed as approved by the Architect and Engineer-in-

23 128.00 Wall painting two coats with weather proof acralic emulsion APEX 114.53 Sq.Mt

paint of approved brand & manufacture and of required shade on

exterior wall surface to give an even shade over and including a

primery coat with alkaly resistance primer of approved brand after

throughly brushing surface to remove all dirt and remains of loose

powdered materials etc comp. for all height as approved by the

Architect and Engineer-in-charge,

24 33.00 Providing and laying broken chine mosaic flooring for terrace using 12 747.29 Sq.Mt

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

25 235.00 Providing and fixing M.S. grills required pattern of window etc. with 101.17 Kg

M.S. flats at required spacing & frame alround square or round bars

with round headed bolts & nuts and welding or by screws and

including one coat of primer and two coats of oil paintng etc. complete

as approved by the Architect and Engineer-in-charge, (A) Plain grill

26 3.00 Providing and fixing window having extruded aluminum colour 1713.70 Sq.Mt

anodized section frame main outer size 63.50X38.10X1.95mm (of

Jindal section no. 2459@ Wt. 1.094 Kg/mt), horizontal three track

member size 92mm x 31.75mm x 1.30mm (of Jindal section no.

@ Wt. 1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm

(of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section No.

8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm

th transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc.Completed as approved by the

Architect and Engineer-in-charge,

27 3.00 Provoding and fixing flush door shutters, solid core construction with 2714.14 Sq.Mt

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Providing for using bright finished M.S. piano hinges of (A) Nickel

plated piano hinges. providing vision panel not exceeding 0.1 Sq.M. in

all types of flush doors. (A) Rectangular or Square.

28 2.00 Providing and fixing FRP FRAME size 100 x 50mm and 28mm thick FRP 2377.76 Sq.Mt

depress pannel shutter having extra reinforcement on sides and edges

and in gel coat finish. The core of the shutter is to be filled up with

injected fire retardent grade polyurethane foam done in situ along

with embedded wooden places for stiffening and also for tacking

hinges and fixture. The hole FRP frame and shutter is to be water

proof, water proof, termite proof and resistance to mild acid/Alkali.

Rates are to be inclusive of S.S hinges with necessary screws and

Alluminium fixture and fastening.Product should have 3 years

prefomance guarantee and company have ISO 9001-2000 certificate.

29 18.00 Providing and laying white glazed tiles 6mm thick in skrting risers of 1054.67 Sqmt

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

30 2.00 Providing and fixing PVC Cowl vent of following dia etc complete 521.55 Nos

as directed (A) 110 mm Dia

31 1.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm 571.08 Nos

diameter with jali of the following nominal diameter of self cleansing

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

32 1.00 Constructing brick masonary chamber for under ground C.I. Inspection 2932.93 Nos

chamber and bends with bricks having crushing strength not less than

35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X

mm. Internal dimensions, total weight of cover with frame to be not

less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C.

top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc. complete. (I) inside

dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line.

33 1.00 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and 3372.19 Nos

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in C.M.

1:3 with finishing curing etc. complete as directed. (upto 10 ton)

34 1.00 Providing and fixing wsh down water closet (European type, W.C. Pan) 1303.71 Each

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in

35 5.00 Providing and fixing screw down bib taps of following size.(B) Brass 186.83 Each

chromium plated screws down Bib Tap. (i) 15mm dia.

36 20.00 Providing laying and jointing in true line and level following dia. 72.65 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 15 mm.

37 15.00 Providing laying and jointing in true line and level following dia. 91.84 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 25 mm.

38 10.00 Providing laying and jointing in true line and level following dia. 195.67 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 50 mm.

39 1.00 Providing and fixing S.W. gully trap with grating brick masonry 1292.19 Nos

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

40 1000.00 Providing erecting and fixing double coated ISI water tank of required 3.95 Lit

capacity each with all necessary fittings and connection etc. complete

41 1.00 Providing and fixing washbasin with single hole for pillar tap with C.I. 1414.18 Each

or M.S. brackets painted white including sutting holes and making

good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white colour

42 1.00 WATER COOLERS :- Providing and erecting water cooler having storage 54515.76 Each

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a

hour, The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with necessary inlet

& outlet connection. The body of water cooler will be made from

Stainless Steel. and ISI Certified

43 28.00 Pro. And fixing single layer water proof gypsum board 12.5mm thick 606.95 Sq.Mt

sections using water proof board of size 1220mm x 1830mm x 8.0mm

Suspended by GI suspender channel of size 25mm x 3mm with inter

mediate channel of size18mm x 40mm x 0.8mm at 1220mm center to

center ceiling section of size 40mm x 35mm x 0.55mm at 457mm c/c

and perimeter channel A of size 20mm x 27mm x 30mm x 0.5mm at

edges & drops incl. paper tap sand sofit cleat, anchor fastener, scoch

bolt connecting cleat, joining compound top coat on ceiling

incl.making necy. opening for light fitting, diffuseretc. comp.

asperdetail drawingas directed

44 4.00 HIGH BACK CHAIR 18685.00 Each

Providing and supplying Revolving High Back Chair (Featherlite

Model.No - ERGON) with head rest .Ergonomic design. Knee tilt

synchro mechanism with multi position locking arrangement and

aluminium die cast arm rest with polished veneer finishing on top of

arm rest. Specially designed anti topple aluminium die cast base, class-

3 gas lift for seat hight adjustment & glass filed nylon castors for

smooth movement,45 DC mouled cusion in seat and back for better

comfort. The chair include pneumatic seat height adjustments. The

sheet and back should be covered with approved genuine leather and

PU leather finish. The quoting price should be inclusive of all types of

taxes & duties ,packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and make.

Approved Make :- Featherlite / HOF / GODREJ .As per choice of users

department and concern officers in charge & as directed by the EIC.

45 8.00 VISITOR CHAIR (Executive) 4646.00 Each

CHAIRS WITHOUT REVOLVING (VISITOR'S) Providing and supplying

low back chair (without revolving) featherlite Model No. ASTRO Visitor

entire frame structure made out with 25 MM Dia CRC tube with

Microns Power coated, with 4 pronged fix base as per sample with

density U-Foam seat and back covered with good upholstered seat

fabric. {The basic rate of fabric not less then Rs. 600 per Rmt. } etc.

Unless specified sample. The quoting price should be inclusive of all

types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical specifications and

make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice

of users department and concern officers in charge & as directed by

46 1.00 STORE WELL 15080.25 Each

Supplying and Placing in Position Godrej make store well. This shall

have an overall size of 916 mm(W) x 486 mm(D) x 1980 mm(H) with

construction. It should have the shelf thickness of 0.7 mm, Back

thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and

all other components shall have a thickness of 0.9mm. These

components shall be made of CRCA ‘D’ grade high yield strength as per

IS:513. The Store well should have a Mazak handle and Three way

locking mechanism with Shooting Bolts. It should have a height wise

adjustable shelf mounting which shall have a Uniformly Distributed

Load Capacity of max 40 Kg. It should also have a M10 Screw type

Leveller with Hex plastic base. The finishing shall include Epoxy powder

coated to the thickness of 50 microns (+/- 10). The quoting price

should be inclusive of all types of taxes & duties ,packing, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. {Godrej} As per choice of users department

and concern officers in charge & as directed by the EIC.

47 1.00 PUBLIC SEATING (3-SEATER MS BENCH) 9872.75 Each

Providing, supplying & placing of featherlite make 3 seater public

lounge chair, Model.No SJ-708 L , With 2 armrest , cross beam it

should be make of poweder coated rectangular tube having size

80MM x 40MM x 2MM. Leg and armrest - these are crome plated

made of cold rolled steel SS 202 grade with 2MM thickness armrest

and leg is assambled to the cross beam with 2 NOS. M10x100MM

bolts. Seat Back Shell is 1.6MM thick preforated sheet SS 202 Grade.

The side bar is made of chrome plated solid steel 30 x 12 MM with

fluting and plastic inserts. the Shell is assambled on the cross beam.

Over all Size 1800MM x 680MM x 410 MM. Height 780 MM x

adjustability at foot individual seat with 540MM, Seat height 410 MM,

Seat back angle 105* . The quoting price should be inclusive of all

types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical specifications and

make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice

of users department and concern officers in charge & as directed by

48 4.00 STORAGE RACK 2555.30 Each

Providing & Supplying Files Storage Racks made out by M.S. slotted

angle of 40 x 40mm (2.5Kg/pcs.) having size of 2000 X 1200 X 400 mm

Depth , with M.S. sheet (3Kg/pcs.) for partitions/shelves - 06 shelves

including Labour, material etc. The quoting price should be inclusive of

all types of taxes & duties ,packing, transportation, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. As per choice of users department and

concern officers in charge & as directed by the EIC.

49 1.00 NOTICE BOARD WITH GLASS DOOR 4734.38 Each

Providing & Supplying Notice Board with Glass door for display

purpose with locking mechanism, having size of 1600 (L) X 1200 (W) X

100 (D) mm, made up of powder coated steel structure with glass in

door with locking facility, etc. The quoting price should be inclusive of

all types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. (Make :- Title Display / Scholar) As per choice of users

department and concern officers in charge & as directed by the EIC.

50 4.00 PRINCIPAL TABLE 18656.72 Each

Providing & Supplying wooden table having size 1450mm X 600mm X

750mm (H). The entire structure should be made with 38/25/18 mm IS

710 ply wherever required as per drawings. Finished with 4mm thk

veneer finish & with matching wooden beading. Applying lamination

polishing on the top of the table, and modestry panel with smooth

duco paint. All internal closed surfaces to be covered with 4.0 mm thk

veneer finish. All wooden surface to be finished in monocoat polish.

Rates to include all necessary hardware and accessories. The quoting

price should be inclusive of all types of taxes & duties, packing,

forwarding, loading, unloading, installaion. As per detail drawing &

choice of users department and Concern officers in charge as directed

51 4.00 Helping Borad 2.0x2.0 FT acrylic sheet in Word Decide By Nagarpalika 1515.00 Nos

Authority Person And Labour Work ETC.

52 4.00 hp Intel Core i3-1 2100T All in One 50494.95 Each

53 2.00 brother A4 and Legal Monochrome (Black)Laser C omputer Printer 21634.20 Each

brother R (HL L5000D with 2 Years Warranty)

54 200.00 POLYCAB Single mode OS2 HDPE Fibre Cable For Networking 95.95 Rmt

55 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 582.77 Pt.

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

56 6.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 809.01 Pt.

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A

Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

57 10.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 780.73 Pt.

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby (h) with oval conduit /PVC casing capping double lock

type erected concealed in wall/ceiling completeswitchboard/mcb db

58 6.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 970.61 Pt.

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.(h) with oval conduit /PVC casing capping

double lock type erected concealed in wall/ceiling completeCATIII

59 6.00 Point wiring for on board Looped Plug with 6A Modular type switch & 309.06 Pt.

5 pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

60 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (C) With oval conduit /PVC casing

capping double lock type

150.00 (a) 2 wire 1.5 sq. mm 71.71 Mtr

80.00 (b) 2 wire 2.5 sq. mm 104.03 Mtr

61 6.00 Providing & Erecting following Shockproof tissino type accessories 219.17 Each

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/ ceiling.(14) Electronic Hum free

EME Socket Type Steps Fan Regulator

62 6.00 Providing & erecting Switch board for Computer or electric apparatus 1133.22 Each

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with

necessary connections as directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type

Accessories CATII

63 6.00 FLUORESCENT TUBES Approved make fluorescent tube 120cms. 18/20 51.51 Each

watt erected, if required.CATIII

64 2.00 Providing & erecting 240 V MCB double pole switch for motor & 329.26 Each

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity (A) 6 to

65 6.00 Providing and erecting Approved make Ceiling fan with double ball 1596.81 Each

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

66 2.00 providing and erecting Miniature circuit breaker single pole 6A to 25A 123.22 Each

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

67 2.00 Providing and erecting Sheet Steel powder coated MCB distribution 702.96 Each

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing(a) single door (IP-30)

68 1.00 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 823.15 Each

'B' grade G.I. pipe with necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG erected & connected as

directed (For panel)

69 4.00 Providing and erecting out door type halogen fitting made from cast 1472.58 Each

alloys with electro- chemically polished Aluminium reflector complete

with tuffend glass, silicon gasket with Halogen tube of following size

(B) With 1000 watt Halogen Tube Cat.III

70 1.00 upply, installation, testing, and commissioning of 42" (106 cm) Smart 32825.00 Each

Full HD LED Television with A+ Grade panel, minimum 1920x1080

resolution, built-in Wi-Fi, Ethernet (RJ45), minimum 2x HDMI, 1x USB

ports, minimum 20W Dolby Audio output, Android/Google TV OS,

screen mirroring; complete with OEM remote, batteries, power cord,

heavy-duty wall-mount bracket, and standard base stand; including on-

site delivery, physical wall mounting, and a minimum 1-year

comprehensive OEM warranty.

71 1.00 Meter Fixing Charge 8997.58 Each

Hasanlpur Civic Center

1 60.00 Excavation for foundation upto 1.5 m depth including sorting out and 117.08 Cu.Mt

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

2 53.00 Filling available excavated earth (excluding rock) in trenches. plinth, 130.39 Cu.Mt

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

3 4.00 Providing and laying cement concrete 1:4:8(1 cement :4 Coarse sand :8 2830.46 Cu.Mt

crushed stone aggregate 40 mm. nominal size) and curing complete

including the cost of form work in (A) Foundation and Plinth

4 9.00 Filling in foundation and plinth with murrum or selected brout for out 289.06 Cu.Mt

side soil in layers of 20 cm. thickness including watering, ramming and

consolidating etc. Complete.

5 1.00 Filling in plinth with sand under floors including watering ramming, 460.19 Cu.Mt

consolidating and dressing complete

6 4.00 Providing & laying in position controlled reinforced cement concrete 4397.50 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, (A) Foundations footing base of

columns and mass concrete.

7 2.00 Providing & laying in position controlled reinforced cement concrete 6255.26 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge,., (D) Coulmns, Pillars, posts and

strut upto floor two level.

8 2 Providing & laying in position controlled reinforced cement concrete 5330.55 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, (C) Ground beam / Plinth Beam

9 2.00 Providing & laying in position controlled reinforced cement concrete 5647.02 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, Slab Beam. Up to All Floor.

10 3.00 Providing & laying in position controlled reinforced cement concrete 5330.55 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge,. Lintal Up to All Floor.

11 1.00 Providing & laying in position controlled reinforced cement concrete 5770.69 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, CHHAJJAS Up to All Floor.

12 5.00 Providing & laying in position controlled reinforced cement concrete 5138.34 Cu.Mt

M- 200 and curing complete including cost of form work and excluding

cost of reinforcement in reinforced concret for following grades,

machined batched & machine vibrated design mix concrete using

graded hard (black trap) stone aggregate of 20mm nominal size

obtained from quarry including mechanical mixing, mechanical

vibrating, compaction, finishing, curing Completed as approved by the

Architect and Engineer-in-charge, SLABS Up to All Floor.

13 1720.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 76.21 Kg

bending, binding and placing in position complete upto floor two level

14 9.00 Brick work using common burnt clay building bricks having crushing 4021.02 Cu.Mt

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

15 20.00 Brick work using common burnt clay building bricks having crushing 4295.99 Cu.Mt

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) for brick work in

superstructure above plinth level upto floor two level (B) Conventional

16 5.00 (i) Half brick masonry in common brunt clay building bricks having 589.32 Sq.Mt

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth for brick work in

superstructure above floor two level (B) Coventional (upto 10 ton)

17 31.00 Providing 10mm thick cement plaster in single coat on brick/concrete 115.81 Sq.Mt

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

18 74.00 Providing 15mm thick cement plaster in single coat on brick/concrete 157.17 Sq.Mt

wall for interior polastering up to floor two level and finished even and

smooth with n(ii) Cementmortar1:4 (1-cement :4-sand)

19 128.00 20 mm. Thick sand faced cement plaster {GUTKA} on walls upto All 300.66 Sq.Mt

height above ground level consisting of 12 mm. Thick backing coat of

c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of c.m. 1:1

(1 cement : 1 sand) etc.

20 28.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 1397.83 Sq.Mt

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for antiskit

21 10.00 Providing and laying Single side mirror polished Black Granite stone 1993.74 Sq.Mt

slab 18 mm (Average) thick of approved quality incl. full moulded

round front edge fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete.

22 105.00 Distempering (Two coats) with oil bound washable distemper of 117.43 Sq.Mt

approved brand and manufacture and of required shade on wall /

ceiling surface to give an even shade over and including a primer coat

with with alkali resistance primer of approved brand and after

thoroughly brushing the surfaceto give an even shade after thoroughly

brushing the surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth for

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats

of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth.Completed as approved by the Architect and Engineer-in-

23 128.00 Wall painting two coats with weather proof acralic emulsion APEX 114.53 Sq.Mt

paint of approved brand & manufacture and of required shade on

exterior wall surface to give an even shade over and including a

primery coat with alkaly resistance primer of approved brand after

throughly brushing surface to remove all dirt and remains of loose

powdered materials etc comp. for all height as approved by the

Architect and Engineer-in-charge,

24 33.00 Providing and laying broken chine mosaic flooring for terrace using 12 747.29 Sq.Mt

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

25 235.00 Providing and fixing M.S. grills required pattern of window etc. with 101.17 Kg

M.S. flats at required spacing & frame alround square or round bars

with round headed bolts & nuts and welding or by screws and

including one coat of primer and two coats of oil paintng etc. complete

as approved by the Architect and Engineer-in-charge, (A) Plain grill

26 3.00 Providing and fixing window having extruded aluminum colour 1713.70 Sq.Mt

anodized section frame main outer size 63.50X38.10X1.95mm (of

Jindal section no. 2459@ Wt. 1.094 Kg/mt), horizontal three track

member size 92mm x 31.75mm x 1.30mm (of Jindal section no.

@ Wt. 1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm

(of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section No.

8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm

th transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc.Completed as approved by the

Architect and Engineer-in-charge,

27 3.00 Provoding and fixing flush door shutters, solid core construction with 2714.14 Sq.Mt

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Providing for using bright finished M.S. piano hinges of (A) Nickel

plated piano hinges. providing vision panel not exceeding 0.1 Sq.M. in

all types of flush doors. (A) Rectangular or Square.

28 2.00 Providing and fixing FRP FRAME size 100 x 50mm and 28mm thick FRP 2377.76 Sq.Mt

depress pannel shutter having extra reinforcement on sides and edges

and in gel coat finish. The core of the shutter is to be filled up with

injected fire retardent grade polyurethane foam done in situ along

with embedded wooden places for stiffening and also for tacking

hinges and fixture. The hole FRP frame and shutter is to be water

proof, water proof, termite proof and resistance to mild acid/Alkali.

Rates are to be inclusive of S.S hinges with necessary screws and

Alluminium fixture and fastening.Product should have 3 years

prefomance guarantee and company have ISO 9001-2000 certificate.

29 18.00 Providing and laying white glazed tiles 6mm thick in skrting risers of 1054.67 Sqmt

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

30 2.00 Providing and fixing PVC Cowl vent of following dia etc complete 521.55 Nos

as directed (A) 110 mm Dia

31 1.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm 571.08 Nos

diameter with jali of the following nominal diameter of self cleansing

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

32 1.00 Constructing brick masonary chamber for under ground C.I. Inspection 2932.93 Nos

chamber and bends with bricks having crushing strength not less than

35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X

mm. Internal dimensions, total weight of cover with frame to be not

less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C.

top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc. complete. (I) inside

dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line.

33 1.00 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and 3372.19 Nos

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in C.M.

1:3 with finishing curing etc. complete as directed. (upto 10 ton)

34 1.00 Providing and fixing wsh down water closet (European type, W.C. Pan) 1303.71 Each

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in

35 5.00 Providing and fixing screw down bib taps of following size.(B) Brass 186.83 Each

chromium plated screws down Bib Tap. (i) 15mm dia.

36 20.00 Providing laying and jointing in true line and level following dia. 72.65 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 15 mm.

37 15.00 Providing laying and jointing in true line and level following dia. 91.84 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 25 mm.

38 10.00 Providing laying and jointing in true line and level following dia. 195.67 Rmt

U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be fixed on the wall with

the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials. (A) 50 mm.

39 1.00 Providing and fixing S.W. gully trap with grating brick masonry 1292.19 Nos

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

40 1000.00 Providing erecting and fixing double coated ISI water tank of required 3.95 Lit

capacity each with all necessary fittings and connection etc. complete

41 1.00 Providing and fixing washbasin with single hole for pillar tap with C.I. 1414.18 Each

or M.S. brackets painted white including sutting holes and making

good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white colour

42 1.00 WATER COOLERS :- Providing and erecting water cooler having storage 54515.76 Each

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a

hour, The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with necessary inlet

& outlet connection. The body of water cooler will be made from

Stainless Steel. and ISI Certified

43 28.00 Pro. And fixing single layer water proof gypsum board 12.5mm thick 606.95 Sq.Mt

sections using water proof board of size 1220mm x 1830mm x 8.0mm

Suspended by GI suspender channel of size 25mm x 3mm with inter

mediate channel of size18mm x 40mm x 0.8mm at 1220mm center to

center ceiling section of size 40mm x 35mm x 0.55mm at 457mm c/c

and perimeter channel A of size 20mm x 27mm x 30mm x 0.5mm at

edges & drops incl. paper tap sand sofit cleat, anchor fastener, scoch

bolt connecting cleat, joining compound top coat on ceiling

incl.making necy. opening for light fitting, diffuseretc. comp.

asperdetail drawingas directed

44 4.00 HIGH BACK CHAIR 18685.00 Each

Providing and supplying Revolving High Back Chair (Featherlite

Model.No - ERGON) with head rest .Ergonomic design. Knee tilt

synchro mechanism with multi position locking arrangement and

aluminium die cast arm rest with polished veneer finishing on top of

arm rest. Specially designed anti topple aluminium die cast base, class-

3 gas lift for seat hight adjustment & glass filed nylon castors for

smooth movement,45 DC mouled cusion in seat and back for better

comfort. The chair include pneumatic seat height adjustments. The

sheet and back should be covered with approved genuine leather and

PU leather finish. The quoting price should be inclusive of all types of

taxes & duties ,packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and make.

Approved Make :- Featherlite / HOF / GODREJ .As per choice of users

department and concern officers in charge & as directed by the EIC.

45 8.00 VISITOR CHAIR (Executive) 4646.00 Each

CHAIRS WITHOUT REVOLVING (VISITOR'S) Providing and supplying

low back chair (without revolving) featherlite Model No. ASTRO Visitor

entire frame structure made out with 25 MM Dia CRC tube with

Microns Power coated, with 4 pronged fix base as per sample with

density U-Foam seat and back covered with good upholstered seat

fabric. {The basic rate of fabric not less then Rs. 600 per Rmt. } etc.

Unless specified sample. The quoting price should be inclusive of all

types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical specifications and

make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice

of users department and concern officers in charge & as directed by

46 1.00 STORE WELL 15080.25 Each

Supplying and Placing in Position Godrej make store well. This shall

have an overall size of 916 mm(W) x 486 mm(D) x 1980 mm(H) with

construction. It should have the shelf thickness of 0.7 mm, Back

thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and

all other components shall have a thickness of 0.9mm. These

components shall be made of CRCA ‘D’ grade high yield strength as per

IS:513. The Store well should have a Mazak handle and Three way

locking mechanism with Shooting Bolts. It should have a height wise

adjustable shelf mounting which shall have a Uniformly Distributed

Load Capacity of max 40 Kg. It should also have a M10 Screw type

Leveller with Hex plastic base. The finishing shall include Epoxy powder

coated to the thickness of 50 microns (+/- 10). The quoting price

should be inclusive of all types of taxes & duties ,packing, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. {Godrej} As per choice of users department

and concern officers in charge & as directed by the EIC.

47 1.00 PUBLIC SEATING (3-SEATER MS BENCH) 9872.75 Each

Providing, supplying & placing of featherlite make 3 seater public

lounge chair, Model.No SJ-708 L , With 2 armrest , cross beam it

should be make of poweder coated rectangular tube having size

80MM x 40MM x 2MM. Leg and armrest - these are crome plated

made of cold rolled steel SS 202 grade with 2MM thickness armrest

and leg is assambled to the cross beam with 2 NOS. M10x100MM

bolts. Seat Back Shell is 1.6MM thick preforated sheet SS 202 Grade.

The side bar is made of chrome plated solid steel 30 x 12 MM with

fluting and plastic inserts. the Shell is assambled on the cross beam.

Over all Size 1800MM x 680MM x 410 MM. Height 780 MM x

adjustability at foot individual seat with 540MM, Seat height 410 MM,

Seat back angle 105* . The quoting price should be inclusive of all

types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our technical specifications and

make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice

of users department and concern officers in charge & as directed by

48 4.00 STORAGE RACK 2555.30 Each

Providing & Supplying Files Storage Racks made out by M.S. slotted

angle of 40 x 40mm (2.5Kg/pcs.) having size of 2000 X 1200 X 400 mm

Depth , with M.S. sheet (3Kg/pcs.) for partitions/shelves - 06 shelves

including Labour, material etc. The quoting price should be inclusive of

all types of taxes & duties ,packing, transportation, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical

specifications and make. As per choice of users department and

concern officers in charge & as directed by the EIC.

49 1.00 NOTICE BOARD WITH GLASS DOOR 4734.38 Each

Providing & Supplying Notice Board with Glass door for display

purpose with locking mechanism, having size of 1600 (L) X 1200 (W) X

100 (D) mm, made up of powder coated steel structure with glass in

door with locking facility, etc. The quoting price should be inclusive of

all types of taxes & duties ,packing, forwarding, loading, unloading,

installaion. (Make :- Title Display / Scholar) As per choice of users

department and concern officers in charge & as directed by the EIC.

50 4.00 PRINCIPAL TABLE 18656.72 Each

Providing & Supplying wooden table having size 1450mm X 600mm X

750mm (H). The entire structure should be made with 38/25/18 mm IS

710 ply wherever required as per drawings. Finished with 4mm thk

veneer finish & with matching wooden beading. Applying lamination

polishing on the top of the table, and modestry panel with smooth

duco paint. All internal closed surfaces to be covered with 4.0 mm thk

veneer finish. All wooden surface to be finished in monocoat polish.

Rates to include all necessary hardware and accessories. The quoting

price should be inclusive of all types of taxes & duties, packing,

forwarding, loading, unloading, installaion. As per detail drawing &

choice of users department and Concern officers in charge as directed

51 4.00 Helping Borad 2.0x2.0 FT acrylic sheet in Word Decide By Nagarpalika 1515.00 Nos

Authority Person And Labour Work ETC.

52 4.00 hp Intel Core i3-1 2100T All in One 50494.95 Each

53 2.00 brother A4 and Legal Monochrome (Black)Laser C omputer Printer 21634.20 Each

brother R (HL L5000D with 2 Years Warranty)

54 200.00 POLYCAB Single mode OS2 HDPE Fibre Cable For Networking 95.95 Rmt

55 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 582.77 Pt.

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

56 6.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 809.01 Pt.

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in below type of pipe erected with 6A

Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

57 10.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 780.73 Pt.

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby (h) with oval conduit /PVC casing capping double lock

type erected concealed in wall/ceiling completeswitchboard/mcb db

58 6.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 970.61 Pt.

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.(h) with oval conduit /PVC casing capping

double lock type erected concealed in wall/ceiling completeCATIII

59 6.00 Point wiring for on board Looped Plug with 6A Modular type switch & 309.06 Pt.

5 pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

60 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (C) With oval conduit /PVC casing

capping double lock type

150.00 (a) 2 wire 1.5 sq. mm 71.71 Mtr

80.00 (b) 2 wire 2.5 sq. mm 104.03 Mtr

61 6.00 Providing & Erecting following Shockproof tissino type accessories 219.17 Each

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/ ceiling.(14) Electronic Hum free

EME Socket Type Steps Fan Regulator

62 6.00 Providing & erecting Switch board for Computer or electric apparatus 1133.22 Each

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with

necessary connections as directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type

Accessories CATII

63 6.00 FLUORESCENT TUBES Approved make fluorescent tube 120cms. 18/20 51.51 Each

watt erected, if required.CATIII

64 2.00 Providing & erecting 240 V MCB double pole switch for motor & 329.26 Each

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity (A) 6 to

65 6.00 Providing and erecting Approved make Ceiling fan with double ball 1596.81 Each

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

66 2.00 providing and erecting Miniature circuit breaker single pole 6A to 25A 123.22 Each

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

67 2.00 Providing and erecting Sheet Steel powder coated MCB distribution 702.96 Each

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing(a) single door (IP-30)

68 1.00 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 823.15 Each

'B' grade G.I. pipe with necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG erected & connected as

directed (For panel)

69 4.00 Providing and erecting out door type halogen fitting made from cast 1472.58 Each

alloys with electro- chemically polished Aluminium reflector complete

with tuffend glass, silicon gasket with Halogen tube of following size

(B) With 1000 watt Halogen Tube Cat.III

70 1.00 upply, installation, testing, and commissioning of 42" (106 cm) Smart 32825.00 Each

Full HD LED Television with A+ Grade panel, minimum 1920x1080

resolution, built-in Wi-Fi, Ethernet (RJ45), minimum 2x HDMI, 1x USB

ports, minimum 20W Dolby Audio output, Android/Google TV OS,

screen mirroring; complete with OEM remote, batteries, power cord,

heavy-duty wall-mount bracket, and standard base stand; including on-

site delivery, physical wall mounting, and a minimum 1-year

comprehensive OEM warranty.

71 1.00 Meter Fixing Charge 8997.58 Each

TOTAL NET AMOUNT

Estimated amount Estimated amount

Put to tender Rs ……............. Put to tender Rs……............

Deduct .............% below Rs………… Add............% above Rs……………

Total Rs………… Total Rs……………

(*Please strike out whichever is not applicable).

Note : 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as

GM\Wv! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0JLhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note : 2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under this signature.

GM\W o Z VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJLP

Note : 3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for

work under all conditions, site, moisture, weather etc.

GM\Wv# o 8F\S[,F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[fNZ[S ZLT[ ;FO;}OL SZJFGM\ ;DFJ[X YFI K[4 VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[

C[9/ SFD VD,DF\ ZC[X[P

Note : 4 To be continued on additional sheets, if found necessary.

GM\Wv$ o H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

Viramgam Nagarpalika