Repair and white wash of pump house and staff quarter of Panjokhara Minor system

Amount

Distempering with washable oil bound distemper (of approved manufacture) one coat on old distempered work.

Finishing walls with exterior decorative cement based paints, such as snowcem Robbiacem etc on old work, one coat to give an even shade

Painting two coats excluding priming coat with synthetic enamel paints in all shades on new wood work or metallic or plastered or concrete surfaces to given an even shade. (Ist quality).

Painting two coat with ready mixed paint for metallic surface in all shade on old steel or iron work. (Ist quality)

Repainting letters and figures of any shades with synthetic enamel paint black or any other approved colour to give an even shade. (b) (i) English and Roman (Hyphons and the like not to be measured and paid for)

Scrapping, brushing to remove paint to bare metal surface

Dismantling cement concrete plain 1:3:6

Cement concrete 1:8:16 with brick ballast 40 mm nominal size in foundation and plinth.

Repair of mild steel rolling Shutter including shutter flat, shutter grease, shutter pipe & spring and shutter cover etc shutter size 8 feet x 8 feet

Repair of mild steel rolling Shutter including shutter flat, shutter grease, shutter pipe & spring and shutter cover etc shutter size 8 feet x 5 feet

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth

Providing& fixing ceramic tiles/anti-skid tiles of size 400mmx400mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment with match the shade of tiles. Note: Tile shall be of premium quality (first Quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSON & RAK AND SIMPOLO..

Tile terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles over a polythene film of 100 micron (0.1 mm) thickness with 25 mm thick layer of fine sand, above and below the ploythene film laid on top of RCC slab including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc

Dismantling of Tile Terracing in cement

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled:-doors

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled:- windows

Cup Board shutter of Commercial hard wood such as hollock, champ, chickrassy and chaplash etc., (non coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned) excluding chowkhat but with commercial plywood panels or faced on one side including iron hinges, and screws complete fixed in position (excluding the cost of handles, tower bolts, hasp with stample but including the Labour for fixing the same). (b) 25 mm thick

Cost of iron fittings, complete for Doors and windows, such as tower bolt, handles etc. and screw for these fittings (excluding sliding bolts) (a) for single leaf shutter.

12mm thick cement plaster 1:4 on wall

Scraping Cement plaster.

6mm thick Cement plaster 1:4 under side of ceiling.

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (Ist quality)

Painting two coats with ready mixed exterior paint in all shades on newly plastered or concrete surface of walls. (Ist quality)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.

Painting new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. (a) hindi (matras, commas, and the like not to be measured or paid for, half letters shall be treated as half).

Pressed steel sheet frames (chowkats) consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of Cement Concrete 1:3:6 for filling in frame, and Cement Concrete 1:3:6 for lugs complete. (b) door and window frame of size 76mm x 38mm with 35mm wide single rebate.

Pressed steel sheet frames (chowkats) consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of Cement Concrete 1:3:6 for filling in frame, and Cement Concrete 1:3:6 for lugs complete. (c) door and window frame of size 127mm x 50mm with 40mm wide double rebate.

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (iv) 40mm thick

Wire gauge of 140 G or 120 G designation fixed on steel windows of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws welded complete in all respects.

Commercial hard wood such as hillock, champ, chikrassi and chaplash etc (non coniferous timber other than teak confirming to IS specification no 1003 kiln seasoned, shutters with vertical styles and rails as specified in statement no. 1 with 2 no plywood panels of the specified thickness, mentioned below, tongued and grooved including the cost of iron hinges, screw, chowks/cleats stops etc. Complete fixed in position excluding the cost of tower bolts and handles but including the labour for fixing the same a) 35 mm thick (12 mm thick commercial plywood panel)

Applying pink primer or aluminum priming coat on wood work including preparation of surface, Knotting and stopping etc.(Ist quality)

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new steel or iron work. Ist quality)

Credit of Tile

Credit of door

Credit of window

Subhkaran Saini Contractor

MUKESH KUMAR

Satbir Singh

Vijay Kumar