WBPWD/SE/SEC/NIT-02/2021-2022

Amount

Compound Lighting:-Supply and Erection of 7 Mtr. Long Octagonal GI pole (Make-BAJAJ/UTKARSH /BANSAL/ TRANSRAIL/ SKIPPER/Valmont/ CG,) confirming to as per IS: 2629/IS4759 with latest amendment, grade S355 of BSEN 10025, as per dimention-Top dia-70mm, Bottom dia-135mm, Section-1(Section Length-7000mm) Thick-3mm Base Plate 225mmx 225mmx 16mm, PCD-2200mm along with 1.5 mtrs long swanneck Type single arm bracketincl. making loop box inside the pole with railway type locking arrangement comprises of 1 no 16A capacity 4 way bakelite base terminal block, 1 No 6A bakelite base fuse base and bridge on insulated chair/ plate fixed in it with setbolts nuts and washers. incl. foundation of suitable size as specified below considering the safe soil bearing capacity at site as T/sqm incl. excavation of earth , providing cutting ,bending and placing in position reinforcement as per drawing providing pipe for cable entry and exit as required and providing and fixing of 4 nos foundation bolt (J Type) as specified below as per drawing on ground surface incl. back filling and cleaning extra earth -7 mtr long(Foundation size- 600mmx600mmx1000mm,j Bolt size- M 24x750) or equivalent.

S/F 250V, street light luminaire having Single Die ceramic base high power LED light source, IP66 protection ( Cat. No. BRP062 LED 84 CW SLC S1 PSU with SPD, Make Philips) or equivalent product of Crompton/ Wipro having similar specification in all respect.The luminaire shall have IS:16106 test report from a NABL accredited lab,confirm to LM-79/80 Test with 5 yrs. warranty Complete with all accessories.

S & Fixing of 250V rectangular Flood light fittings with GI supporting structure ,nuts, bolts etc. incl all accesaries. (Cat. No.BVP192 LED82 CW HO NB FG GR PSU, Make-Philips) or equivalent product of Crompton/ Wipro having similar specification in all respect. The fittings shall be 5 yrs. warranty Complete with all accessories.

Supply & Laying of 4 Core 16 Sq.mm 1.1 KV Grade XLPE/PVC insulated. PVC sheathed, steel Armoured Al. conductor Cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages & painting and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984/ 3975:1970 /8130:1984/ 3961:1967/ 10418:1982/10810:1984 as amended upto date, in respect of component materials and tests. [Nicco / Gloster/ Polycab/ Havells/RR Kable]

Supply & Laying of following sizes 1.1 KV Grade XLPE/PVC insulated. PVC sheathed, steel Armoured Al. conductor Cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984/ 3975:1970 /8130:1984/ 3961:1967/ 10418:1982/10810:1984 as amended upto date, in respect of component materials and tests. [Nicco / Gloster/Polycab/Havells/RR Kable] (a) a) 4C X 16 sqmm XLPE A/Al Cable

a) 3C X 6 sqmm XLPE A/Al Cable

S/L of 3x1.5 sqmm FR single core multi stranded copper wire for connection from loop box to fitting through 19mm dia polythene pipe.(Make: Havells/Finolex/RR Kable/Polycab)

S/F compression type cable end gland with finishing end by crimping method for the following size a) 4 core 16sqmm A/Al armoured cable

S/F compression type cable end gland with finishing end by crimping method for the following size. a) 3 core 6 sqmm A/Al armoured cable

Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Medium) protection with necessary fittings and jointing metarials as required.

S & F decorative post top light at existing gate with 1 no 50 mm dia 2 ft long GI pipe (Cat.No:LPTO-40-CDL, Make-Crompton) or equivalent product of Philips/ Wipro having similar specification inall respect. The luminariare shall have IS: 16106 test report from a NABL accredited lab. Conorm to LM-79/80 test report with 5 yrs. warranty Complete with all accessories.

Design, Manufacture, testing, supply and commissioning of Double door outdoor type Distribution Feeder Pillar box (Length 750 X Breadth 325 X hight 600 mm.) conforming to Indian Standard IS : 5039-1969 with latest amendments ,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable for short circuit fault of 31 MVA at 415 Volts, fabricated as per size, design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -54 in accordance with IS : 2147 -1962 with its latest ammendmentThe feeder pillar box will be fabricated by CPRI approved fabricator as per detail specification below. The Enclosure shall provide Degree of protection IP -54 in accordance with IS : 2147 -1962 with its latest ammendment.The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X6) & MS Flat ( 50X6 ). The Base Plate will be made by 5 mm thick MS Plate. The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have a set of water proof double hinged door at the front and back with suitable locking arrangement ( Godrej Type ) and provision for manual locking arrangement. Adequate ventilation by means of louvers with wire mesh shall be provided on both sides and at the top and bottom of both sides of LT pillars.The inside will be painted by 1 coat of Redled / zinc chromate and the outside will be painted by 2 coats of synthetic enamel paint over 1 coat of Redled / zinc chromate. A hylam sheet of 10mm thick of suitable size will be fitted for holding the switches and accessories ,that will be supplied and fixed as specified below by making necessary interconnection by required sizes CU wires & Epoxy paintings as per direction of EIC. The following 415 / 230 Volt Cubicle Type switches with fuses & accessories will be fixed in the panel.

It will be installed on a suitable size brick pillar platform with first class brick foundation 60 cm above ground level & 30 cm below ground i/c plastering as per direction of Engineer-in-charge.The following 415 / 230 Volt Cubicle Type switches with fuses & accessories will be fixed in the panel. i) S/F 415V, TPN32 SFU Main Switch (L&T/Siemens/Schneider) ii) 500, 63A, 4bar Cu-bar BBC of size 500mm X 150mm iii) S.F 16A DP MCB with encloure- 6(Legrand/ SIEMENS/Schneider/ABB) iv)S & F 6Amp SPMCB(for control circuit)-1 no. (Legrand/ SIEMENS/Schneider/ABB) v) 32Amp 3 pole power contractor (LT make cat no MNX25/230V)--1no vi) 24 Hr programmable Digital dial timer (L&T, Cat No 67DDT))--1No vii) 25A Auto-Off-Bypass DPDT toggle switch (approved make)-1No. viii) S/F of Baton Holder with 5W LED Lamp (Philips/Crompton/ Wipro) ix) Danger Board (15 cm X10 cm) x) LED indication lamp (approved make)--3no xi) Outgoing connector make ELMAX (approved make)--2Nos.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed, By ISI Medium GI Pipe incl. Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil.

LED Sign Board:-Supply,Installation,Testing and Commissioning of LED Sign Board at the top floor level to be fixed on wall having following specifications along transporation of the materials at the site. signage name- ( name Attach with this estimate) i)size of the board:20.00 ft X 7.00 ft (Approximately) ii)materials of the board-3mm thick ACP outdoor qualuity. iii)Inside:-50mm X 50mm X 3.6mm thick hollow square bar. iv)Material of the letter: 6mm thick imported best quality acrylic material with CNC cut v)Fixing structure:-By 8 nos. 4.5ft (50mm X 50mm X 6mm)square bar and for base 2nos. 19,68ft(40mm X 40mm X 3mm) square bar and 1mm thick Alluminium sheet smooth bended by CNC guided machine and fix with 4 haded screw. vi)Light:-suitable no of LED chips(Make Samsungs/OSRAM/ Cree) inside the letter with adopter. Making arrangement for fixxing of the board to be fixed on the wall from the top floor level of the Mother and Child H Hospital building by providing suitable size of MS angles,fastners,nuts and bolts or by welding method including painting the structure and also back side of the board by 2 coat synthetic enamal paint over red leas primer as instructed by the EIC for enchoring the board with own tools & tackles.Details drawing as per annexure A

ULTRA ELECTRICALS AND ELECTRONICS

MAA TARA ENTERPRISE

S D ENTERPRISE

MAHESWAR ELECTRICAL INDUSTRIES