Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.9 L+₹92,851.44 (2.26%)Rejected-Finance A 91 DEFENCE COLONY AGRA CANTT AGRA UP PIN 282001 | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹42.3 L+₹1.3 L (3.14%)Rejected-Finance C 27 MODERN NURSERY GARDEN BARRIER NO 02 DHAURERA MAFI IZZATNAGAR BAREILLY 243122 UP | BAREILLY | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹42.8 L+₹1.8 L (4.32%)Rejected-Finance 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
5 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) BAREILLY
HQ Commander Works Engineers AF Military Engineer Services Bareilly 243002
PROVISION OF RECHARGING PITS IN AIRFIELD AREA AT AF STATION BAREILLY
2024_MES_638166_2
81422/E8
Open Tender
Civil Works - Others
Item Rate
180 days
BAREILLY
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (AF) BAREILLY
₹94,000
17 May 2024
14 Mar 2024
8 Apr 2024
14 Mar 2024
5 Apr 2024
22 Mar 2024
15 Mar 2024 - 21 Mar 2024
Amount
Excavation over areas (Manual Excavation) n.exc.1.50 mtr deep and getting out, in soft/loose soil, complete all as specified & directed.
Excavation by mechanical means (Hydrolic Excavation) over areas (exceeding 30 cm in depth upto 1.5 mtr , 1.5 mtr in width as well as n,exc 10 Sqm on plan) including getting out, in any type of soil and disposal of excavated earth upto lead 50 mtr and lift upto 3.0 mtr, complete all as specified & directed.
All as per item No 2 here-in-above but exc 3.0 mtr and n.exc 4.5 mtr deep.
All as per item No 2 here-in-above but exc 4.5 mtr and n.exc 6.0 mtr deep.
All as per item No 2 here-in-above but exc 6.0 mtr and n.exc 7.5 mtr deep.
All as per item No 2 here-in-above but exc 7.5 mtr and n.exc 9.0 mtr deep.
Excavating in trenches (Manual Excavation), n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out, in soft/loose soil, complete all as specified & directed.
Removing excavated soil to a distance exc 1.5 KM but n.exc. 5 KM and depositing where directed at a level nexc. 1.5 M above the starting point complete all as specified & directed.
Removing excavated soil to a distance n.exc. 50 Mtr and depositing where directed at a level nexc. 1.5 M above the starting point complete all as specified & directed.
Returning, filling in spreading watering and well ramming in layer nexc. 25 cm in any type of soil complete all as specified & directed.
M&L for cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in filling, foundation and mass concrete etc., complete as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) as in filling, foundation and mass concrete, complete as specified and directed.
M&L for cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains including necessary form work, moulds etc., complete as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete as specified and directed.
Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete as specified and directed.
M&L for brick work with kiln burnt clay sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in cement mortor 1:4 complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as n lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
S&F TMT mild steel reinforcement bar 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed.
M&L for RCC M-25 design mix (using (20 mm graded stone agg) in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pillaster and buttresses etc, complete all as specified and directed.
M&L for RCC M-25 design mix (using (20 mm graded stone agg) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Use & waste of formwork to sides and soffits of slabs lintels, cantilevers, shelves including supports for rough finished flat surfaces of concrete all as specified and directed.
Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, fair finish surfaces all as specified and directed.
Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished flat surfaces of concrete all as specified and directed.
M&L for precast cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set & fixed in cement mortar 1:4, complete all as specified and directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde-E-165, complete all as specified and directed.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentcomplete conforming to Fe-290 Gde-E-165, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) bed to drain pipes 200 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.
M&L for Reinforced concrete pipes 200 mm bore, class NP2, laid and jointed complete with collars; complete all as specified and directed.
M&L for loose filling with aggregates of broken stone gauge 50 to 200 mm in soakage pits, soakage wells all as specified and directed.
M&L for loose filling with bazri/gravel of size gauge 5 to 10 mm in layers n.exc 15 cm thick each, spread, leveled and rammed including watering, all as specified and directed.
M&L coarse sand (1.5 to 2 mm) filling under floors or in foundations, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4, finished fair and even surface, complete all as specified and directed.
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Provision of bore hole / well of 250 mm dia size pilot bore through any type of soil, strata including hard dense stone/boulder by means of direct rotary method below ground complete all as specified (Note- Pipe and accessories shall be measured & paid separately).
Supplying, lowering & jointing 150 mm bore UPVC casing pipes, class CS conforming to IS:12818-2010 with UPVC in bore well etc. complete all as specified & directed.
Supplying, lowering, assembly & jointing 150 mm bore UPVC casing slotted pipes, class CS conforming to IS:12818-2010 with UPVC fittings, having slots of 3 mm size in bore well etc. including filling of gap with 3 to 6 mm gravel around casing pipe, complete all as specified.
S&F PVC well cap suitable for 150 mm dia CPVC casing pipe at top with locking arrangement, complete all as specified & directed.
S&F PVC bail plug suitable for 150 mm dia CPVC casing pipe at bottom with locking arrangement, complete all as specified & directed.
Supplying, lowering & jointing 150 mm bore UPVC casing slotted pipes, class CS conforming to IS:12818-2010 with UPVC fittings, (having slots of 1.58 mm size) in bore well etc. including filling of gap with 3 to 6 mm gravel around casing pipe, complete all as specified.
S R BUILDERS
AJAY BUILDCON ENGINEERS AND CONTRACTORS
Shikhar ji Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .