Loading…
Loading…
Tender Value
₹13.4 Cr
EMD Value
₹13.4 L
Closing Date
3 Jul 2026, 3:00 pm
Similar tender results from the same govt authority in the past 3 years.
Construction of 150 bedded Vishram Sadan at GGH Hospital in Kurnool, Andhra Pradesh under CSR initiative by Ms POWERGRID
NBCC/RBG/South/PowergridCSR/VS/Kurnool/2026/24
NBCC/RBG/South/PowergridCSR/VS/Kurnool/2026/24
Open Tender-Domestic
Civil Works General
Kurnool, Andhra Pradesh
₹11,800
₹13.4 L
19 Jun 2026
19 Jun 2026
3 Jul 2026
3 Jul 2026
BILL OF QUANTITIES (BOQ) FOR
Project - Construction of 150 bedded Vishram Sadan at GGH Hospital in Kurnool, Andhra Pradesh under CSR activity of POWERGRID
DSR AMOUNT 2023 2023 INCLUDING DSR AMOUNT NDSR AMOUNT
S.No. DSR-2023 DESCRIPTION
(in Rs) COST INDEX 2025 (in Rs) in Rs
(A) (A) CIVIL, INTERIOR AND EXTERNAL DEVELOPMENT
3 SH-5.0 REINFORCED CEMENT CONCRETE 48682153.00 52576725.24 0.00
7 SH-9.0 WOOD, UPVC AND FRP WORK 5289271.00 5712412.68 0.00
11 SH-12.0 FALSE CEILING WORK 755909.00 816381.72 0.00
13 SH-22.0 WATER PROOFING WORK 0.00 0.00 2530174.00
16 SH-15.0 DISMANTLING WORK 60337.00 65163.96 0.00
17 SH-2A HORTICULTURE WORKS 147469.00 159266.52 17500.00
19 NDSR/MR FURNITURE WORK 0.00 0.00 5653300.00
18 NDSR/MR INTERNAL & EXTERNAL SIGNAGE 0.00 0.00 167560.00
21 SH-18 EXTERNAL SEWER & DEVELOPMENT 1749313.65 1889258.75 1114339.40
Total Amount with correction factor 0.973 as per OM CPWD
Total Amount with correction factor 0.973 as per OM CPWD
dated 08.08.2024
SUB TOTAL Civil 112971717.39
Signature of Contractor 1 Signature of NBCC
Digitally signed by DEEPAK
DSR AMOUNT 2023 2023 INCLUDING DSR AMOUNT NDSR AMOUNT
S.No. DSR-2023 DESCRIPTION
(in Rs) COST INDEX 2025 (in Rs) in Rs
DSR-2025 DSR AMOUNT 2023 2023 INCLUDING DSR AMOUNT NDSR AMOUNT
S.No. DESCRIPTION
(E&M) (in Rs) COST INDEX 2025 (in Rs) in Rs
(B) E&M (DSR 2025)
2 SH-39.0 CCTV & SURVEILLIANCE SYSTEM 860625.00 1,206.82
3 SH-28.0 FIRE ALARM SYSTEM 273893.00 -
6 SH-22 EXTERNAL ELECTRICAL WORK 2875693.00 29,26,330.53
Total Amount with correction factor 0.973 as per OM CPWD
Total Amount with correction factor 0.973 as per OM CPWD
dated 08.08.2024
SUB TOTAL E&M 20710737.31
GRAND TOTAL 133682455
GRAND TOTAL 133682455
GRAND TOTAL(IN lAKHS) 1336.82
GRAND TOTAL(IN lAKHS) 1336.82
Signature of Contractor 2 Signature of NBCC
Digitally signed by DEEPAK
Detailed Estimate Based On DSR-2023 With Cost Index & Market Rate
Project - Construction of 150 bedded Vishram Sadan at GGH Hospital in Kurnool, Andhra Pradesh under CSR activity of POWERGRID
Name of Work- TENDER BOQ Civil Work
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-2 EXCAVATION WORK
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual cum 4356.26 177.50 773236.00
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
1 plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of cum 3510.55 196.00 688068.00
2 foundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 and for all lift.
1.1.2 Earthwork is disposal upto 5km By Mechanlcal Transport lncludlng cum 182.85 326.68 59733.00
3 loadlng,unloadlng and stacking
2.22.3 Open timbering over areas including strutting, shoring etc. complete. sqm 628.12 71.30 44785.00
4 (Measurements to be taken of the face area timbered): Depth exceeding 3 m but
not exceeding 4.5 m
2.27 Supplying and filling in plinth with sand under floors, including watering, cum 98.24 2123.75 208637.00
5 ramming, consolidating and dressing complete.
2.34 Supplying chemical emulsion in sealed containers including delivery as
6 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 412.35 234.75 96799.00
2.35 Diluting and injecting chemical emulsion for Pre-CONSTRUCTIONAL anti-
7 termite treatment (excluding the cost of chemical emulsion) :
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per
hole, 300 mm apart including drilling 12 mm diameter holes and plugging with
cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
Signature of Contractor 3 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 742.21 310.05 230122.00
Total Carried over to summary 2101380.00
SH-4 CONCRETE WORK
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cum 189.25 6812.00 1289171.00
cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4
8 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40
mm nominal size derived from natural sources)
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sqm 113.27 749.30 84873.00
coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over
9 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including necessary excavation,
levelling & dressing & finishing the top smooth.
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of sqm 135.52 146.15 19806.00
approved quality using 1.7kg per square metre on damp proof course after
10 cleaning the surface with brushes and finally with apiece of cloth lightly soaked
in kerosene oil.
4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any cum 15.34 9895.20 151792.00
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
11 blocks, plain window sills, fillets, sunken floor etc., up to floor five level,
excluding the cost of centering, shuttering and finishing: 1 :2:4 (1 Cement : 2
coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20
mm nominal size derived from natural sources)
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 sqm 166.92 410.85 68579.00
12 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal
Total Carried over to summary 1614221.00
Signature of Contractor 4 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-5 REINFORCED CEMENT CONCRETE
5.33 Providing and laying in position ready mixed or site batched design mix cement
concrete for reinforced cement concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to
accelerate / retard setting of concrete, to improve durability and workability
without impairing strength; including pumping of concrete to site of laying,
13 curing, carriage for all leads; but excluding the cost of centering, shuttering,
finishing and reinforcement as per direction of the engineer-in-charge; for the
following grades of concrete. Note: Extra cement up to 10% of the minimum
specified cement content in design mix shall be payable separately. In case the
cement content in design mix is more than 1.10 times of the specified minimum
cement content, the contractor shall have discretion to either re-design the mix or
bear the cost of extra cement.
5.33.1 All works upto plinth level Concrete of M25 grade with minimum cement cum 765.17 9504.75 7272750.00
content of 330 kg /cum
5.33 Providing and laying in position ready mixed or site batched design mix cement
concrete for reinforced cement concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to
accelerate / retard setting of concrete, to improve durability and workability
without impairing strength; including pumping of concrete to site of laying,
curing, carriage for all leads; but excluding the cost of centering, shuttering,
finishing and reinforcement as per direction of the engineer-in-charge; for the
following grades of concrete. Note: Extra cement up to 10% of the minimum
specified cement content in design mix shall be payable separately. In case the
cement content in design mix is more than 1.10 times of the specified minimum
cement content, the contractor shall have discretion to either re-design the mix or
bear the cost of extra cement.
5.33.2.1 All works above plinth level upto floor V level Concrete of M25 grade with cum 955.65 9860.40 9423091.00
minimum cement content of 330 kg /cum
Signature of Contractor 5 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and laying design mix cement concrete of M-30 grade, in roads/
taxi tracks/ runways, using cement content as per design mix, using coarse
sand and graded stone aggregate of 40 mm nominal size in appropriate
proportions as per approved & specified design criteria, providing dowel
bars with sleeve/ tie bars wherever required, laying at site, spreading and
compacting mechanically by using needle and surface vibrators, levelling
to required slope/ camber, finishing with required texture, including steel
form work with sturdy M.S. channel sections, curing, making provision for
contraction/ expansion, construction & longitudinal joints (10 mm wide x
50 mm deep) by groove cutting machine, providing and filling joints with
approved joint filler and sealants, complete all as per direction of Engineerin-
charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to
be paid separately).
Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cum 54.00 10529.35 568585.00
16.43.1 cement used as per design mix is payable/ recoverable separatel.y. Cement
concrete prepared with batch mixing machine
5.9 Centering and shuttering including strutting, propping etc. and removal of form
16 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 261.57 392.15 102575.00
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string sqm 1.5 842.50 1264.00
17 courses etc.
18 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 2839.11 927.25 2632565.00
19 5.9.4 Shelves (Cast in situ) sqm 51.82 927.25 48050.00
20 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 3428.00 736.40 2524379.00
21 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 2073.93 961.30 1993669.00
22 5.9.16.1 Edges of slabs and breaks in floors and walls Under 20 cm wide metre 324.65 208.55 67706.00
23 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 52.88 951.10 50294.00
5.22.A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, KG 218304.00 107.85 23544086.00
24 placing in position and binding all complete upto plinth level & above plinth
level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Signature of Contractor 6 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. metre 5779.83 78.40 453139.00
25 projections.
Total Carried over to summary 48682153.00
SH-6 BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class cum 117.65 7132.25 839109.00
26 designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class cum 608.98 9105.95 5545341.00
27 designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
6.13.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class sqm 1174.22 1123.80 1319588.00
28 designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every sqm 1164.93 104.80 122085.00
29 third course of half brick masonry.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class sqm 113.05 1150.50 130064.00
30 6.13.1 designation 7.5 in superstructure above plinth level up to floor V level. Cement
mortar 1:3 (1 cement: 3 coarse sand)
Total Carried over to summary 7956187.00
SH-7 STONE WORK
7.38.1.1 Stone tile work for wall lining upto 10 m height with special adhesive over 12 sqm 71.44 3094.55 221075.00
mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand), including
31 pointing in white cement with an admixture of pigment to match the stone shade.
8 mm thick (mirror polished and machine cut edge).Granite stone of any colour
Signature of Contractor 7 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Total Carried over to summary 221075.00
SH-8 CLADDING WORK
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 sqm 1636.59 1267.95 2075114.00
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-
32 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of
matching shade complete.
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills,
facias and similar locations of required size, approved shade, colour and texture
33 laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints
treated with white cement, mixed with matching pigment, epoxy touch ups,
including rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
Total Carried over to summary 2331929.00
SH-9 WOOD, UPVC AND FRP WORK
9.147.A Providing and fixing factory made uPVC glazed/wire mesh windows/doors
comprising of lead free uPVC multi-chambered frame, sach and mullion/coupler
(where ever required) extruded profiles having minimum wall thickness of 1.70
mm for Series R1 and R2 profiles and 2.10 mm foe series R3 and R4 profiles
conforming to EN : 12608 in any shape, colour and design duly reinforced with
galvanized mild steel section made of required shape & size as per CPWD
Specification, uPVC extruded glazing beads, interlocks and inline sash adaptor
(where ever required) of appropriate dimension, EPDm gasket , hardware, SS 304
grade fasteners of minimum 8 mm dia with countersunk head, comprising of
matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS
1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel
screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and
fusion welded/mechanically jointed duly sealed at all corners, including drilling
of holes for fixing haedware and drainage of water etc.
Signature of Contractor 8 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
After Fixing frame the gap between frame and adjacent finished wall shall be
filled with weather proof sillicon sealant over backer rod of approved size and
quality, all complete as per approved drawing conforming to CPWD specification
& direction of Engineer-in-charge. Section of steel reinforcement and cross
sections of uPVC Profiles to be as per design approved by Engineer-inCharge.
Wire mesh/Glazing of plain/toughened/ laminated /double glass unit with /
without high performance coatings as per design requirements and conforming to
IS :3548 & IS : 16231 shall be paid separately. Notes:- Structural
design proof cheacked from a Government Engineering Institute, to be provided
by the manufacturer for : (i)
Sites with basic wind speed >45 m/Sec as per IS 875 - Part 3. (ii) Sites with
structure height more than 20m for all wind speeds.
9.147.B4.1 Three track panels sliding door with Aluminium channel for roller track, wool sqm 317.70 8287.05 2632796.00
pile, zinc alloy (zamak) powder coated handle on two panels along with multi-
point locking system, adjustable nylon rollers with SS 304 body. Using R3 series
with frame (98 mm & above)x (40 mm & above) & sach (30 mm & above ) x (74
mm & above).(Height upto 2.5 metre).
9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other cum 3.60 142949.70 514619.00
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for
separately). Second class teak wood
9..53 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame Nos. 224.00 228.85 51262.00
with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement
concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size).
9.21.1 Providing and fixing ISi marked flush door shutters conforming to IS 2202 (Part SQM 124.32 2392.65 297454.00
I) non-decorative type, core of block board construction with frame of 1st class
37 hard wood and well matched commercial 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters: 35 mm thick including ISi
marked Stainless Steel butt hinges with necessary screws
9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood SQM 248.64 897.30 223105.00
grain in gloss / matt/ suede finish with high density protective surface layer and
38 reverse side of adhesive bonding quality conforming to IS : 2046 Type S,
including cost of adhesive of approved quality.
Signature of Contractor 9 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
9.23. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum SQM 124.32 462.35 57479.00
39 depth on all edges of flush door shutters (over all area of door shutter to be
9.9.1.1 Providing and fixing glazed shutters for doors, windows and clerestor windows SQM 73.96 4940.20 365377.00
40 using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessary screws.
9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised Nos. 57.00 303.25 17285.00
41 (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed
to required colour or shade, with nuts and screws etc. complete : 300x16 mm
9.97 Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic0
42 coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete :
9.100.1 Providing and fixing aluminium handles, ISi marked, anodised (anodic coating Nos. 115.00 66.25 7619.00
43 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
or shade, with necessary screws etc. complete : :125 mm.
9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, Nos. 58.00 72.35 4196.00
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent
44 or dyed to required colour and shade, with necessary screws etc. complete. Twin
9.84 Providing and fixing aluminium extruded section body tubular type universal Nos. 41.00 983.15 40309.00
hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the
45 body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000
mm), with double speed adjustment with necessary accessories and screws etc.
Signature of Contractor 10 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- meter 546.60 570.95 312081.00
section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive
shutter of 30 mm thickness. The laminate shall be moulded with fire resistant
46 grade unsaturated polyester resin and chopped mat. Door frame laminate shall be
2mm thick and shall be filled with suitable wooden block in all the three legs. The
frame shall be covered with fiber glass from all sides. M.S. stay shall be provided
at the bottom to steady the frame.
9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of sqm 202.23 3720.75 752447.00
required colour and approved brand and manufacture, made with fire - retardant
grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for
47 forming hollow rails and styles, with wooden frame and suitable blocks of
seasoned wood inside at required places for fixing of fittings, cast monolithically
with 5 mm thick FRP laminate for panels conforming to IS: 14856, including
fixing to frames
Total Carried over to summary 5289271.00
Signature of Contractor 11 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-10 STEEL WORK
10.30.2 Providing & fixing glass panes with putty and glazing clips in steel doors, SQM 320.94 1390.15 446155.00
48 windows, clerestory windows, all complete with : 5.5 mm thick glass panes
10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, KG 7440.32 172.60 1284199.00
fixing in position and applying a priming coat of approved steel primer using
49 structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
10.3 Providing and fixing in position collapsible steel shutters with vertical channels SQM 132.60 11439.60 1516891.00
20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and
50 bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles,
including applying a priming coat of approved steel primer.
9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows KG 3354.48 238.35 799540.00
etc. with M.S. flats, square or round bars etc. including priming coat with
51 approved steel primer all complete. Fixed to openings /wooden frames with rawl
plugs screws etc.
10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm sqm 4.20 5804.35 24378.00
angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary
fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces
Structural steel work in single section, fixed with or without connecting KG. 4572.00 117.35 536524.00
53 10.1 plate,including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
Signature of Contractor 12 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and fixing M.S. Tubular frames and shutters for doors, windows, KG. 71.70 195.20 13996.00
ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm
thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of
required size, including fixing of necessary butt hinges and screws and applying a
priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block
15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate
20 mm nominal size)
Total Carried over to summary 4621683.00
SH-11 FLOORING WORK
11.55.1 Providing and laying flamed finish Granite stone flooring in required design and sqm 27.75 3186.70 88431.00
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with
55 cement slurry and pointing with white cement sluny admixed with pigment of
matching shade including rubbing, curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge : Flamed finish granite stone
slab Jet Black, Cheny Red, Elite Brown, Cat Eye or equivalent.
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to 15:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing
56 with grey cement slurry @3.3 kg/sqm including grouting the joints with white
cement and matching pigments etc. The tiles must be cut with the zero chipping
diamond cutter only. Laying of tiles will be done with the notch trowel, plier,
wedge, clips of required thickness, leveling system and rubber mallet for placing
the tiles gently and easily.
11.41A.1.1 Double Charge Size of Tile 600 x 600mm sqm 1778.51 1453.65 2585331.00
11.26.1 Kata stone slab flooring over 20 mm (average) thick base laid over and jointed sqm 858.33 1948.25 1672241.00
with grey cement slurry mixed with pigment to match the shade of the slab,
57 including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement: 4 coarse sand): 25mm Thick
Signature of Contractor 13 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on sqm 156.55 2354.70 368628.00
12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed
with grey cement slurry mixed with pigment to match the shade of the slabs,
including rubbing and polishing complete.
11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be sqm 355.00 1464.85 520022.00
specified by the manufacturer) with water absorption less than 0.08% and
conforming to 15:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing
with grey cement slurry @3.3 kg/sqm including grouting the joints with white
59 cement and matching pigments etc. The tiles must be cut with the zero chipping
diamond cutter only. Laying of tiles will be done with the notch trowel, plier,
wedge, clips of required thickness, leveling system and rubber mallet for placing
the tiles gently and easily. Glazed Vitrified tiles Matt Size of Tile 600 x 600 mm
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 metre 304.80 91.75 27965.00
60 mm wide and 4 mm thick
Total Carried over to summary 5262618.00
SH-13 FINISHING WORK
61 13.4.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 6116.68 343.65 2101998.00
62 13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) sqm 224.34 357.35 80168.00
63 13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust).
13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1
64 cement: 6 coarse sand)
13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content less than 50 gram/litre, of approved manufacturer and of required shade
and colour all complete to achieve even shade and colour :
Signature of Contractor 14 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
13.41.1 New work (two or more coats) over and including water sqm 11769.19 185.65 2184949.00
65 thinnable priming coat with cement primer having VOC content less than 50
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone sqm 3153.25 171.10 539520.00
additives of required shade: New work (Two or more coats applied @
66 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @
0.90 litre/10 sqm)
13.80 Providing and applying white cement based putty of average thickness 1 mm, of sqm 14679.01 156.05 2290660.00
67 approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth Complete.
13.48.3 Finishing with Deluxe Multi surface paint system for interiors and sqm 617.55 170.70 105416.00
exteriors using Primer as per manufacturers specifications : Painting Steel
work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied
@ 0.80 ltr/10 sqm of approved brand and manufacture
Total Carried over to summary 10479300.00
Signature of Contractor 15 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-12 FALSE CEILING WORK
12.52.1 Providing and fixing tiled false ceiling of specified materials of size sqm 397.23 1902.95 755909.00
595x595 mm in true horizontal level, suspended on inter locking metal grid of hot
dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side
inclusive) consisting of main 'T runner with suitably spaced joints to get required
length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced
at 1200 mm center to center and cross ·r of size 24x25 mm made of 0.30 mm
thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to fonn a grid of 1200x600 mm and secondary cross "T" of length
600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm
and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved
texture in the grid including, required cutting/making, opening for services like
diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ~" runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm
fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI
adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm
spaced at 1200 mm center to center along main T, bottom exposed width of 24
mm of all T-sections shall be pre-painted with polyester paint, all complete for all
heights as per specifications, drawings and as directed by Engineer-in-charge. GI
Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595
mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of
100 gms/sqm (both sides inclusive) and electro statically polyester powder coated
of thickness 60 microns (minimum), including factory painted after bending.
Total Carried over to summary 755909.00
Signature of Contractor 16 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-21 ALUMINIUM WORK
21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and KG 2089.75 539.85 1128152.00
partitions with extruded built up standard tubular sections/ appropriate Z sections
and other sections of approved make conforming to IS: 733 and IS: 1285, fixing
with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/
70 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel
screws, all complete as per architectural drawings and the directions of Engineer
in-charge. Polyester powder coated aluminium (minimum thickness of polyester
powder coating 50 micron)
21.10' Providing and fixing double glazed hermetically sealed glazing in SQM 83.59 4997.70 417758.00
aluminium windows, ventilators and partition etc. with 6 mm thick clear
float glass both side, having 12 mm air gap, including providing EPDM
71 gasket, perforated aluminium spacers, desiccants, sealant (Both primary
and secondary sealant) etc. as per specifications, drawings and direction of
Engineer-in-charge complete.
Total Carried over to summary 1545910.00
Signature of Contractor 17 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
SH-22 WATER PROOFING WORK
NDSR 1.2mm Single component PU + 1 mm thick PVC Membrane, (Category
A, Type IV), complying to IS 15909 on the mother/ RCC slab) Providing and
applying waterproofing for Terrace Slab Waterproofing in two parts involving
combined protection of liquid applied membrane (polyurethane) as well as pre-
formed membrane (PVC membrane) with combined high elongation and very
high tensile properties, by following methods as per the specifications listed
below and Testing of treatment as per the requirements. Terrace Slab
waterproofing system shall comply to Bureau of Indian Standard, BIS
15909:2020 & BIS 16471:2017 & shall have BIS marking on each waterproofing
membrane roll, as per GOI Ministry Gazette/Bureau of Indian Standards BIS
standard quality order 245134 dated April’2023. The Design life of
waterproofing membranes for Terrace Slab shall be minimum 65 years, as defined
72 in GOST/PNST 6321 . Compliance to Bureau of Indian Standards, BIS
15909:2020 & Government of India /Bureau of Indian Standards, (Quality
Control Order) CG-DL-E-12042023-245134 shall be submitted by the original
manufacturer and original manufacturer shall confirm that every roll of their PVC
geomembrane shall carry BIS mark, as defined in Ministry/Bureau of Indian
Standard BIS Quality order CG-DL-E-12042023-245134. Manufacturer
Certificates of compliance attesting that waterproofing membrane for
underground structures along with independent 3rd party report for waterproofing
membrane meeting minimum 65 years’ design life for critical buildings
applications shall be submitted and shall installed by following methods. The
First part consist of all surface area should cleaned up to visible of hair cracks /
aggregate texture.
Signature of Contractor 18 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Second part shall be two coats of two components, eco-friendly, aqueous based
epoxy resin primer system having elongation >300%, on prepared concrete
absorbent surfaces such as porous concrete will require sealing to prevent
absorption of waterproof coating & shall be applied @ 200 gm/sqm in 2 coats.
Third part shall be supplying and applying high-performance, eco-friendly, no tar,
no bitumen, cold applied, single-component polyurethane waterproof coating, in
two to three coats @ minimum consumption of 1.5 kg/sqm to achieve minimum
1.2mm thickness. The single component, polyurethane system shall meet the
requirement of ASTM C 836 should have the following minimum properties: i)
Solid % (as per IS 101/IS 1964) >78%; ii) Tensile Strength (as per ASTM D412) -
>2 MPa; iii) Elongation (as per ASTM 0412) > 500%; (iv) Hardness (as per
ASTM D2240) - > 60 Shore A; (v) Drying Time - 45-75 min depending on
temperature/humidity; (vi) Recovery after 100% elongation - >85% (as per
ASTM 0412) shall be applied as per manufacturer specification.
Fourth part shall be Supplying & Installing Type A, Category IV, 1mm thick cold
applied, flexible, non-reinforced, synthetic, non-bitumen, non-tar, high flexible,
PVC waterproofing membrane comprising of a SIGNAL LAYER membrane and
is made from virgin and premium PVC-P and shall have smooth finish. Back
layer on the underside shall be highly resistant to puncture with excellent root
resistant features. The signal layer allows visual inspection of the membrane and
assists to identify any damages during its installation so as to achieve the intended
purpose to achieve roof and podium deck waterproofing, as per BIS 15909:2020
and complying with 65 years design life with independent certification from 3rd
party lab for 65 years design life for underground and buried applications for
2mm thickness is acceptable to ascertain design life. It possesses extremely high
resistance to potential attack by micro- organisms and perforation by roots. The
PVC synthetic membrane should be fully bonded to already coated liquid applied
membrane using special synthetic adhesive and shall have following minimum
properties: (i) Elongation: >250% (as per ASTM D412); (ii) Thickness: 1mm
(EN 1849); (iii) Tensile strength > 14.72 N/sqmm (as per ASTM D412); (iv)
Puncture Resistance: > 425N; (v) Tear Resistance: >75N & >65N in Machine &
Cross Direction. Synthetic PVC-P membrane for hardscape and landscape
podium waterproofing shall be root resistant and should have BIS certification
and should carry batch no/ project name/ manufacturing month on each roll for
ensuring right quality and tracking with MTC.
Signature of Contractor 19 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Fifth part includes providing separation layer of fibermesh of minimum 250 gsm;
static puncture resistance of > 250N; Dynamic puncture resistance of 40MM; and
should be laid over the entire waterproofing layer before laying screed to slope.
Sixth Part consisting of the slope-making part consists of providing and laying 75
mm average thick screed concrete of M20 in slope as per manufacturers
Seventh Part shall be providing and laying water proofing treatment on protection sqm 766.30 1721.62 1319277.00
screed laid to slope by applying 2 coats of 2 components flexible Acrylic
Cementitious Coating at minimum consumption of 1.8 kg per sqm for 2 coats so
as to achieve minimum thickness of 1mm and minimum elongation of 120%, as
per manufacturer's specifications and installed by manufacturer's approved
applicators. This waterproof coating shall be capable of bonding to both porous
and non porous substrate and shall have water pressure resistance of 7 bar as per
DIN 1048. The waterproofing layer shall be allowed to air cure for 4 hours and 2c
acrylic cementitious coating shall be applied by brush and will be allowed to air
cure for 4 hours followed with water curing for 48 hours. Eighth part (only for
landscape podium areas) consist of Providing & laying rolled matrix soil filter
cum drainage system, of minimum 7-8mm thickness having a compressive
strength of 180 KN/sqm, 8mm height with geotextile on top, complete as directed.
The minimum properties should be Compressive strength >180 KN/m2. Screed
concrete made for required slope/ drainage (Not included)
Providing and applying (silicon based water repellent) on exposed masonry sqm 2022.48 265.50 536968.00
surfaces such as cement concrete, cement plaster, brick work or stone work, using
silane / siloxane or potassium methyl siliconate based material, after thorough
cleaning of the surface to remove dust, dirt, oil, grease, efflorescence and other
foreign matter.The treatment shall be colourless, non-film forming, breathable,
and capable of penetrating into the pores of the substrate to render the surface
73 NDSR water repellent without affecting appearance. Application shall be carried out by
spray / brush / roller as per manufacturer’s specifications to achieve full saturation
of the surface, including necessary number of coats.
The work shall also include protection of adjoining surfaces, curing, and making
good, complete as per specifications, manufacturer’s recommendations and
directions of Engineer-in-Charge.
Signature of Contractor 20 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and laying single component PU + 0.3mm PVC membrane, complying sqm 399.31 1225.00 489154.00
to IS 15909 (Category A, Type 1) curing, and making good, complete as per
74 NDSR specifications, manufacturer’s recommendations and directions of Engineer-in-
Providing and applying 2-component acrylic cementitious coating + food grade sqm 136.87 1350.00 184775.00
epoxy coating. The work shall be carried out all complete as per specification and
75 NDSR the direction of the engineer-in- charge. The product performance shall carry
guarantee for 10 years against any leakage.
Total Carried over to summary 0.00 2530174.00
SH-19 DRAINAGE WORK
19.18.2 Supplying and fixing C.I. cover without frame for manholes :500 mm diameter Nos 3.00 3441.20 10324.00
76 C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement Nos 51.00 544.70 27780.00
concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) as per standard design : With 20x20 mm square bar
Total Carried over to summary 38104.00
SH-16 ROAD WORK
Preparation and consolidation of sub grade with power road roller of 8 to 12 Sqm 360.00 218.90 78804.00
16.1 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to
78 camber and consolidating with road roller including making good the undulations
etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50
16.78.2 Construction of granular sub-base by providing close graded Material conforming Cum 54.00 2924.85 3032.85
to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed
material by tippers to work site, for all leads & lifts, spreading in uniform layers
of specified thickness with motor grader on prepared surface and compacting with
vibratory power roller to achieve the desired density, complete as per
specifications and directions of Engineer-in-Charge. With material conforming to
Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
Signature of Contractor 21 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
16.45 Providing and fixing pre-moulded joint filler in expansion joints of RCC per cm 2340.00 5.30 4685.30
roads / CC pavements after making the joints dust free with high pressure depth per
air jet cleaners, all complete as per direction of the Engineer-in-Charge. cm width
80 (Pre-moulded joint fillers shall be made of bitumen hot sealing compound per m
impregnated fibre board having impregnation more than 35%, conforming length
to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound
16.46.1 Providing and filling in position rubberized bitumen hot sealing compound per cm 1170.00 8.65 10121.00
for sealing of expansion joints in roads / pavements all complete as per depth per
direction of the Engineer-in-Charge.. Providing and filling in position rubberized cm width
bitumen hot sealing compound for sealing expansion joints in roads / pavements per m
all complete as per direction of the Engineer -in - charge. length
Providing and laying factory made chamfered edge Cement Concrete paver SQM 344.87 1045.65 360613.00
blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of
required strength, thickness & size/ shape, made by table vibratory method using
PU mould, laid in required colour & pattern over 50mm thick compacted bed of
sand, compacting and proper embedding/laying of inter locking paver blocks into
82 the sand bedding layer through vibratory compaction by using plate vibrator,
16.91 filling the joints with sand and cutting of paver blocks as per required size and
pattern, finishing and sweeping extra sand. complete all as per direction of
Engineer-in-Charge.
60 mm thick C.C. paver block of M-35 grade with approved color design
Total Carried over to summary 457256.15
SH-15 DISMANTLING WORK
15.23.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking Sqm 161.00 113.35 18249.00
83 material within 50 metres lead. For thickness of tiles above 25 mm and up to 40
15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for Sqm 15.00 54.65 820.00
84 plaster including disposal of rubbish to the dumping ground within 60 metres
Signature of Contractor 22 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
15.7.4 Demolishing brick work manually/ by mechanical means including stacking of CUM 2.00 2060.20 4120.00
serviceable material and disposal of unserviceable material within 60 metres lead
as per direction of Engineer-in-charge.
In cement mortar
15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and SQM 5.00 56.35 282.00
86 false ceiling including disposal of unserviceable material and stacking of
serviceable material with in 50 meters lead as directed by Engineerin- charge.
15.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter NOS 10.00 502.75 5028.00
87 including chowkhats, architrave, holdfasts etc. complete and stacking within 50
metres lead :15.12.1 Of area 3 sq. metres and
15.18 Dismantling steel work in built up sections in angles, tees, flats and channels KG 5635.00 5.65 31838.00
88 including all gusset plates, bolts, nuts, cutting rivets, welding etc. including
dismembering and stacking within 50 metres lead.
Total Carried over to summary 60337.00
SH-2A HORTICULTURE WORK (2020)
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking Cum 20.00 78.10 1562.00
of serviceable materials and then disposing of surplus soil, by spreading and
neatly leveling within a lead of 50 m and making up the trenched area to proper
levels by filling with earth or earth mixed with sludge or/and manure before and
after flooding trench with water (excluding cost of imported earth, sludge or
Supplying and stacking of good earth at site including royalty and carriage up to 1 Cum 30.00 515.60 15468.00
90 2.2 km (earth measured in stacks will be reduced by 20% for payment).
Supplying and stacking at site dump manure from approved source, including Cum 10.00 290.70 2907.00
91 2.4.2 carriage up to 1 km (manure measured in stacks will be reduced by 8% for
payment) : Screened through sieve of I.S. designation 16 mm
92 2.7 Fine dressing of the ground Sqm 200.00 3.70 740.00
Signature of Contractor 23 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Mixing earth and sludge or manure in the required proportion specified or Cum 40.00 36.55 1462.00
93 2.9 directed by the Officer-in-charge..
Grassing with selection No. 1/ Doob grass including watering and maintenance of
the lawn for 30 days or more till the grass forms a thick lawn, free from weeds
and fit for mowing including supplying good earth, if needed (the grass and good
earth shall be paid for separately).
2.10.2 With grass Turf Sqm 200.00 13.30 2660.00
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness Cum 200.00 87.50 17500.00
of existing ground prepared with proper level and ramming with required tools
95 2.34 wooden and than rolling the surface with light roller make the surface smoothen
and light watering the same maintenance for 30 days or more till the grass
establish properly,as per direction of officer in charge
Preparation of beds for hedging and shrubbery by excavating 60 cmdeep and Cum 86.40 222.85 19254.00
trenching the excavated base to a further depth of 30 cm, refilling the excavated
earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8
parts of stacked volume of earth after reduction by 20% : one part of stacked
96 2.13 volume of sludge or manure after reduction by 8%), flooding with water, filling
with earth if necessary, watering and finally fine dressing, leveling etc. including
stacking and disposal of materials declared unserviceable and surplus earth by
spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m
complete (cost of sludge, manure or extra earth to be paid for separately).
SUPPLY OF PLANTS
Providing and Displaying Foxtail palm plant well developed with fresh & healthy Nos 10.00 1183.90 11839.00
97 5.30 foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the
officer-in-charge.
Supply and stacking of plant Thuja compacta of height 75-90 cm., conical Nos 15.00 130.00 1950.00
98 8.76 shaped, well formed with healthy foliage in earthen pots of size 30 cm as per
direction of the officer-in-charge.
Providing and Displaying Washingtonia filifera palm plant well developed 90 to Nos 5.00 538.15 2691.00
99 5.44 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as
per direction of the officer-in-charge.
Signature of Contractor 24 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and Displaying Phoenix roebelenii palm plant well developed having Nos 5.00 538.15 2691.00
100 5.37 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per
direction of the officer-in-charge.
Providing and Displaying Bismarkia Palm plant 115 to 180 cm ht., well Nos 10.00 1937.25 19373.00
101 5.11 developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot
as per direction of the officer-in-charge.
Providing and Displaying Cycus cirsnallis plant well developed with fresh & Nos 5.00 1947.50 9738.00
102 5.13 healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the
officer-in-charge.
Providing and Displaying Topiary plant of Ficus Nuda well developed with fresh Nos 5.00 1291.50 6458.00
& healthy foliage from Top to Bottom with single piller 75 to 90 cm spread, 195
103 5.39 to 210 cm ht. in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-
Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150- 165 Nos 10.00 50.00 500.00
cm. in big poly bags of size 25 cm as per direction of the officer-incharge.
Supply and stacking of Plumeria acutifolia plant of height 150-165 cm. with 3-4 Nos 15.00 200.00 3000.00
branches in big size HDPE bag as per direction of the officer-in-charge
Supply and stacking of Chorisia speciosa plant of height 150-165 cm. in big poly Nos 5.00 80.00 400.00
bags of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Polyalthia pendula (Ashok Pendula) plant of height 180- Nos 15.00 100.00 1500.00
107 7.77 195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge.
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm Nos 15.00 65.00 975.00
in big polybag of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Polyalthia longifolia (Ashok) plant of height 180- 195 cm. Nos 15.00 100.00 1500.00
in gunny bag of size 30 cm as per direction of the officer-incharge.
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120- 150 Nos 15.00 80.00 1200.00
cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
Signature of Contractor 25 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
7.11 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 Nos 15.00 350.00 5250.00
111 cm well developed in big HDPE bags.
Providing and displaying of Areca Palm plant, having ht. 2.40 m to 2.70 m with Nos 15.00 592.45 8887.00
112 3.22 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35
cm size of Bucket type cement pots & as per direction of the officer-in-charge.
3.78 Providing and displaying of Raphis palm specimen plant, having ht. 1.50 m to Nos 15.00 530.95 7964.00
1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage
leaves in 40 cm size of Earthen Pot / Chali / Tray & as per direction of the officer-
114 NDSR Flowering & Indoor Potted Plants in 10" earthern pots Nos 50.00 350.00 17500.00
Total Carried over to summary 147469.00 17500.00
Signature of Contractor 26 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
NDSR/MR FURNITURE WORKS
SINGLE BED WITH UNDER-BED STORAGE NOS 150 17000.00 2550000.00
Providing, fabricating, supplying and placing single bed of overall size 2060 mm
long × 900 mm wide × 750 mm high, with mattress support level at 400 mm
above finished floor level, suitable for dormitories, hostel rooms, guest rooms and
institutional accommodation. The structural framework shall be fabricated from
ERW steel tubular sections conforming to IS 4923, comprising 40 mm × 40 mm
× 1.6 mm thick square hollow sections for vertical legs and 60 mm × 40 mm × 1.6
mm thick rectangular hollow sections for side rails and load-bearing members.
The mattress support platform shall consist of 1.20 mm thick CRCA steel sheet
115 NDSR conforming to IS 513, adequately stiffened and supported on secondary cross
members fabricated from 20 mm × 20 mm ERW square tubes placed at maximum
300 mm centre-to-centre spacing. The bed shall be provided with integrated under-
bed storage fabricated from minimum 0.90 mm thick CRCA steel sheet, forming
enclosed storage compartments below the mattress level. All steel components
shall undergo seven-tank anti-corrosion pre-treatment followed by epoxy
polyester powder coating of minimum 60 microns and maximum 80 microns
thickness. The completed bed shall be rigid, free from vibration and capable of
safely carrying a uniformly distributed load of not less than 250 kg.
Signature of Contractor 27 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
ALMIRAH WITHOUT PARTITION NOS 16 20000.00 320000.00
Providing, fabricating, supplying and placing full-height steel almirah of overall
dimensions 900 mm wide × 600 mm deep × 2000 mm high, manufactured from
CRCA steel conforming to IS 513. Shelves shall be fabricated from minimum
0.70 mm thick steel, doors from 0.80 mm thick high-yield steel, back panel from
0.80 mm thick steel and side, top, bottom and structural members from minimum
0.90 mm thick steel. The almirah shall be provided with double hinged doors
reinforced internally for rigidity and fitted with three-way locking arrangement
incorporating vertical shooting bolts and heavy-duty locking mechanism. Internal
arrangement shall consist of four adjustable shelves creating five storage
compartments with clear shelf spacing of approximately 350 mm to 375 mm.
Shelves shall be mounted on slotted support arrangements and designed to carry
uniformly distributed loads of not less than 40 kg per shelf. The unit shall be
provided with adjustable levellers and finished with epoxy polyester powder
coating of 50 ±10 microns thickness over phosphated steel surfaces.
ALMIRAH WITH PARTITION NOS 45 20000.00 900000.00
Providing, fabricating, supplying and placing steel almirah of overall dimensions
900 mm wide × 600 mm deep × 2000 mm high, manufactured from CRCA steel
conforming to IS 513 and constructed using material thicknesses similar to the
non-partitioned almirah. The unit shall incorporate a full-height central partition
dividing the storage space into two functional sections. One section shall contain
117 NDSR four adjustable shelves forming five storage compartments while the second
section shall be configured for hanging garments and shall include chrome-plated
hanging rod and top shelf. Doors shall be fabricated from 0.80 mm thick steel and
fitted with three-way locking arrangement, Mazak handles and shooting bolts.
The complete unit shall be mounted on adjustable levellers and shall receive
epoxy polyester powder coating of 50 ±10 microns thickness over properly pre-
treated steel surfaces.
Signature of Contractor 28 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
BEDSIDE STORAGE UNIT NOS 241 3600.00 867600.00
Providing, supplying and placing bedside storage unit of overall dimensions 450
mm long × 450 mm deep × 510 mm high, fabricated from 18 mm thick BWR
grade plywood conforming to IS 303 and finished with decorative laminate of
approved shade and texture. The unit shall consist of one lockable drawer and one
open storage compartment. The drawer shall be mounted on telescopic ball-
bearing channels and provided with handle-less finger groove profile formed
through machined reverse tapered edge treatment. All exposed edges shall be
protected with 2 mm thick PVC edge banding applied through automatic edge-
banding machine. The unit shall be provided with 50 mm high skirting base and
all internal and external surfaces shall be properly sealed, laminated and finished
to provide resistance against moisture, wear and routine cleaning.
Providing, supplying and placing study table of overall dimensions 1200 mm
long × 600 mm deep × 750 mm high. The worktop shall be manufactured from 25
mm thick BWR grade plywood conforming to IS 303 finished with decorative
laminate of approved make and shade. All exposed edges shall be protected with
2 mm thick PVC edge banding. The supporting frame shall consist of powder-
coated ERW steel tubular sections conforming to IS 4923, comprising 50 mm ×
50 mm × 1.6 mm thick vertical members, 50 mm × 25 mm × 1.6 mm thick
horizontal members and 40 mm × 20 mm × 1.6 mm thick cross beams. The frame
shall be connected through die-cast aluminium connectors and shall be provided
with adjustable levellers for floor unevenness. All steel components shall be
powder coated to a thickness of 60–80 microns.
Signature of Contractor 29 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing, supplying and placing institutional chair having overall dimensions
490 mm wide × 480 mm deep × 800 mm high. The seat and back shall be
manufactured as a single-piece shell from injection moulded polypropylene
reinforced with 20% glass fibre (PPGF). The shell shall be ergonomically
120 NDSR contoured with waterfall front edge and lumbar support profile. The supporting
structure shall comprise loop-type frame fabricated from 12 mm diameter mild
steel rods conforming to IS 7887 interconnected by MS flats of size 25 mm × 5
mm. The frame shall be treated and powder coated to a thickness of 40–60
microns. Polycarbonate leg shoes shall be provided at all floor contact points. The
chair shall be stackable, durable and capable of carrying a uniformly distributed
load of not less than 120 kg.
Providing, supplying and placing upholstered room chair having overall
dimensions 690 mm wide × 580 mm deep × 750 mm high with seat height of 460
mm. The supporting structure shall be fabricated from kiln-seasoned and
chemically treated beech wood with moisture content not exceeding 12 percent.
121 NDSR All joints shall be mortise and tenon type reinforced with adhesive and
mechanical fasteners. The seat, back and arm assembly shall be formed from
moulded polyurethane foam of density not less than 40 kg/m³ upholstered in
premium quality polyester fabric of approved shade. Exposed timber surfaces
shall be finished with melamine or polyurethane coating. The completed chair
shall be suitable for institutional accommodation and guest room applications.
Signature of Contractor 30 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
TWO-SEATER SOFA NOS 6 36000.00 216000.00
Providing, supplying and placing two-seater sofa complete with timber
framework, cushioning, upholstery and stainless steel legs suitable for waiting
areas, lounges and office spaces. The internal structure shall be manufactured
from seasoned silver wood and pine wood treated against termite and fungal
122 NDSR attack. Seat and back cushions shall consist of polyurethane foam having density
between 32 kg/m³ and 40 kg/m³. The supporting framework shall incorporate zig-
zag springs manufactured from 4 mm diameter spring steel wire to provide
resilience and comfort. Upholstery shall be premium quality leatherette resistant
to abrasion and routine cleaning. Stainless steel legs shall be fitted with non-
marking floor protectors. The sofa shall be structurally stable and suitable for
heavy institutional use.
SINGLE-SEATER SOFA NOS 11 15000.00 165000.00
Providing, supplying and placing single-seater sofa constructed using seasoned
timber framework, spring support system, polyurethane foam cushioning and
premium quality leatherette upholstery. The internal structure shall comprise
123 NDSR treated silver wood and pine wood members securely jointed to form a rigid
frame. Seat and back cushions shall consist of polyurethane foam of density
32–40 kg/m³ supported on spring system. Stainless steel legs shall be provided
with floor protectors. The completed sofa shall be free from wrinkles, sagging and
upholstery defects and shall be suitable for waiting lounges and office cabins.
CENTRE TABLE NOS 6 5300.00 31800.00
Providing, supplying and placing centre table of overall dimensions 1050 mm
long × 525 mm deep × 450 mm high. The top shall be fabricated from 18 mm
thick BWR grade plywood conforming to IS 303 and finished with decorative
laminate of approved shade. All exposed edges shall be machine finished and
protected with 2 mm thick PVC edge banding. The supporting frame shall consist
of powder-coated CRCA steel tubular legs fabricated from swaged steel tubes of
32 mm diameter tapering to 19 mm diameter with minimum wall thickness of 1.6
mm. The table shall be rigid, wobble-free and suitable for waiting lounges and
office reception areas.
Signature of Contractor 31 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
CORNER TABLE NOS 10 5300.00 53000.00
Providing, supplying and placing corner table of overall dimensions 600 mm long
× 450 mm deep × 450 mm high. The table top shall be fabricated from 18 mm
thick BWR grade plywood conforming to IS 303 and finished with decorative
125 NDSR laminate. Exposed edges shall be protected with 2 mm thick PVC edge banding.
The supporting structure shall consist of powder-coated CRCA steel tubular legs
of approved profile and thickness. The table shall be suitable for use alongside
lounge seating and waiting area furniture.
TABLE FOR REGISTRATION AREA NOS 1 5300.00 5300.00
Providing, supplying and placing registration counter of overall dimensions 1500
mm long × 750 mm deep × 750 mm high complete with side storage unit of
dimensions 1050 mm long × 450 mm deep × 750 mm high. The worktop shall be
manufactured from 25 mm thick BWR grade plywood conforming to IS 303 and
finished with decorative laminate. Modesty panel, side panels, shutters and
126 NDSR drawer fronts shall be fabricated from 18 mm thick BWR grade plywood. All
exposed edges shall be protected with 2 mm thick PVC edge banding. The
supporting frame shall comprise powder-coated steel tubular sections of sizes 50
mm. The counter shall incorporate aluminium flip-up cable management unit,
PVC cable tray, concealed wire routing provisions, lockable drawers, lockable
shutters and adjustable storage shelves. Hardware shall be heavy-duty stainless
steel or approved equivalent make.
Signature of Contractor 32 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
CHAIR FOR OFFICE ROOM NOS 5 5300.00 26500.00
Providing, supplying and placing ergonomic revolving office chair conforming to
ANSI/BIFMA standards with overall height adjustable from 870 mm to 970 mm.
The chair shall be provided with moulded polyurethane foam seat of density
approximately 55 kg/m³ conforming to IS 3400 and upholstered in polyester
fabric having abrasion resistance exceeding 50,000 cycles. The back shall
comprise moulded polymer frame with breathable mesh upholstery providing
adequate lumbar support. The chair shall incorporate centre-tilt mechanism with
locking positions, Class-4 gas lift mechanism, fixed armrests, nylon glass-filled
base and 50 mm diameter twin wheel castors. The chair shall provide height
adjustment, tilt adjustment and 360-degree swivel movement and shall be suitable
for continuous office usage.
TWO-SEATER WITH TABLE FOR CANTEEN AND READING ROOM 31 3500.00 108500.00
Providing, supplying and placing two-seater dining and reading room furniture
unit comprising one table and two chairs suitable for institutional dining halls,
canteens and reading rooms. The table shall measure 750 mm long × 450 mm
deep × 750 mm high and shall be fabricated from 25 mm thick BWR grade
plywood conforming to IS 303 finished with decorative laminate. The supporting
structure shall comprise powder-coated ERW steel tubular sections of minimum
128 NDSR 1.2 mm thickness with adjustable levellers. The accompanying chairs shall have
overall dimensions 500 mm wide × 550 mm deep × 800–850 mm high and shall
comprise powder-coated steel frames with ergonomically designed polypropylene
or upholstered seat and back assemblies. Upholstered chairs shall utilize
polyurethane foam of minimum density 32 kg/m³. All exposed steel surfaces shall
be powder coated to minimum thickness of 50 microns. The complete set shall be
robust, easy to maintain and suitable for heavy-duty institutional usage.
Total Carried over to summary 0.00 5653300.00
NDSR/MR INTERNAL & EXTERNAL SIGNAGE
Providing and fixing external building signages as per approved drawing & NOS 1 82600 82600.00
technical specifications.
Providing and fixing internal building signages as per approved drawing & NOS 1 84960 84960.00
technical specifications.
Signature of Contractor 33 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Total Carried over to summary 0.00 167560.00
SH-17 INTERNAL PLUMBING WORKS
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with
100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern
with manually controlled device (handle lever) conforming to IS:7231,
Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures
complete including cutting and making good the walls and floors wherever
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral Each 11 6767.40 74441.40
type foot rests
Providing and fixing white viterous china extended wall mounting water Each 55 14999.15 824953.25
closet(WC) of size 780x370x690mm of approved shape including providing &
132 17.78 fixing white china cistern with dual flush including fitting, of flushing capacity
3/6 ltr (adjustable to 4/8 ltrs), including seat cover and cistern fittings, nuts, bolts
and gasket, SS Flush Plate etc complete.
Providing & fixing white vitreous china Under Counter wash basin with C.I.
133 NDSR brackets painted white, with rubber plug, 32mm C.P. brass waste of standerd
pattern including cutting & making good the walls wherever required.
a)White Vitreous China Wash basin size (609x410x167)mm . Each 51 5275.65 269058.13
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.
17.28.1 Flexible Pipe
Providing and fixing bevelled edge 6mm mirror of superior glass (of approved Each 52 2500.00 130000.00
135 NDSR quality) complete with 6mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS :
136 17.1 13983 with C.I. brackets and stainless steel plug 40mm including painting of
fittings and brackets, cutting and making good the walls wherrerever required.
17.10.1.2 Kitchen sink with drain board Size 510x1040 mm bowl depth 225 mm. Each 1 7514.65 7514.65
Signature of Contractor 34 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and fixing Stainless Steel AISI 304(18/8) commercial kitchen sink as Each 1 25000.00 25000.00
per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting
of fittings and brackets, cutting and making good the walls wherrerever required.
1200 x 510 mm bowl depth 450 mm
Providing and fixing white vitreous china flat back / wall corner type lipped front
urinal basin of approved make, complete with 5 litre capacity white PVC
automatic flushing cistern, including standard flush pipe, spreaders with brass
unions, clamps, waste fitting, painting of fittings and brackets, cutting and making
good the walls and floors wherever required, as per direction of Engineer-in-
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Each 11 6258.75 68846.25
Providing and fixing stone slab table rubbed, edges rounded and polished of size
75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished
8.10.2 Granite Stone of approved shade Each 22 4051.85 89140.70
CP Brass fittings
140 18.21 Providing and fixing unplasticised PVC connection pipe with brass unions.
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore Each 68 97.75 6647.00
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long Each 66 1230.98 81245.00
141 NDSR with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and
make as approved by Engineer - in - charge.(Health Faucet).
Providing and fixing C.P. brass two way bib cock of approved quality
conforming to IS:8931 .
a) 15 mm nominal bore Each 55 1431.96 78757.91
Providing and fixing of 200 mm dia CP Shower rose with 15 mm to 20 mm inlet Each 52 8441.04 438934.05
including bath spout wall diverter with all fittings.
Signature of Contractor 35 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of
approved quality conforming to IS:8931 .
a) 15 mm nominal bore Each 88 527.56 46425.72
Central Hole waste coupling without Popup Waste System with 32mm full thread Each 51 691.70 35276.51
Providing and fixing basin diverter mixer wall mounted basin mixer upper trim Each 51 6096.31 310911.62
with concealed body.
Sink Mixer with Swinging Spout (Table Mounted Model) with 450mm Long Each 1 2664.47 2664.47
Braided Hoses .
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931:
18.52.1 15mm nominal bore Each 52 670.45 34863.40
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & Each 62 1651.97 102422.21
make and as per the direction of Engineer-in-charge. .
Providing and fixing SS liquid soap container 109 mm wide, 125 mm high and Each 33 532.89 17585.50
112 mm distance from wall of standard shape with bracket of the same materials
with snap fittings of approved quality and colour, weighing not less than 105
Providing and fixing SS towel rail complete with brackets fixed to wooden cleats
151 NDSR with CP brass screws with concealed fittings arrangement of approved quality
600 mm long towel rail with total length of 600 mm, 78 mm wide and effective Each 56 532.89 29842.06
height of 88 mm, weighing not less than 170 gms..
152 NDSR Providing and fixing SS towel ring Each 51 532.89 27177.59
153 NDSR Providing and Fixing soap dish holder. Each 56 639.47 35810.47
154 NDSR Providing and Fixing double coat hook. Each 56 532.89 29842.06
Signature of Contractor 36 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and fixing 600x12x5 mm glass shelf with edges round off supported on Each 4 1083.50 4334.00
155 17.33 anodised aluminum angle frame with C.P. brass brackets and guard rail complete
fixed with 40mm long screws, rawl plugs etc. complete.
Providing and fixing 600 x 300 mm Stain less steel Heavy duty 304 grade towel Each 4 2664.47 10657.88
rack in toilet with all fittings.
Supply and installation of corner glass shelf for toilet made of toughened Each 56 532.89 29842.06
(tempered) safety glass, 8 mm to 10 mm thick, clear / frosted / tinted as specified,
with polished and rounded edges and corner safety chamfers. Shelf size shall be
250 × 250 mm (±25 mm) triangular type suitable for corner mounting, capable of
withstanding normal bathroom load without deflection. The shelf shall be
supported on heavy-duty stainless steel Grade SS 304 brackets / clamps with
chrome or satin finish, complete with stainless steel screws, wall plugs and
concealed fittings. Installation shall include accurate alignment, drilling, fixing,
sealing with clear silicone sealant, and making good wall finishes, fixed true to
line and level, complete in all respects.
158 NDSR Providing and fixing CP Brass toothbrush/toothpaste holder. Each 56 532.89 29842.06
159 NDSR Providing and fixing modual water proof medicine/toiletry chest box. Each 4 799.34 3197.36
Providing and fixing dishwasher connection brass elbow with other necessary Each 2 799.34 1598.68
Supply and installation of grab bar for toilet made of high-quality stainless steel Each 4 1046.41 4185.64
Grade SS 304, 32 mm to 38 mm diameter, seamless pipe with minimum 1.2 mm
thickness, having satin/matt finish, corrosion-resistant and easy to clean, complete
with concealed wall mounting flanges, stainless steel screws, rawl bolts and all
necessary fittings. Grab bar shall be wall mounted / angle / straight / L-shaped / U-
shaped as specified, capable of withstanding a minimum load of 150 kg, installed
at required height as per CPWD / NBC / Accessibility guidelines, fixed firmly on
RCC or brick wall with proper backing support, including cutting, making good
the wall surface, testing and making the installation fully functional, complete in
Signature of Contractor 37 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Supply and installation of hinged support rail for toilet made of heavy-duty
stainless steel Grade SS 304 (SS 316 for coastal or high-corrosion areas), 32 mm
to 38 mm diameter seamless pipe with minimum 1.2–1.5 mm wall thickness,
finished in satin/matt anti-slip finish, complete with nylon or rubber hand grip
sleeve (where specified). Hinged rail shall be foldable (up/down movement) with
162 NDSR smooth action, equipped with locking or friction hinge mechanism to hold
position, and provided with concealed wall fixing flange using stainless steel
fasteners, anchor bolts and necessary backing plates. The rail shall be capable of
supporting a minimum load of 150 kg, installed at required height and orientation
as per NBC / CPWD / Accessibility norms, including all accessories, cutting,
making good the wall surface and testing, complete in all respects.
UPVC WASTE & VENT PIPES AND FITTINGS
Providing, supplying, installing, testing and commissioning Supreme UPVC
SWR drainage pipes and fittings made of unplasticized polyvinyl chloride
(UPVC), manufactured with two-layer construction for enhanced durability, light
163 NDSR grey colour, conforming to IS 13592:2013 and IS 14735:1999 standards, with
high ring stiffness and smooth inner bore ensuring efficient flow and minimal
deposition. Pipes are designed for soil and waste discharge in residential,
commercial and institutional buildings.
164 NDSR P TRAP
165 NDSR Providing and fixing 100x100 mm ss jali for trap. Each 166 266.45 44230.19
166 NDSR 45 Degree BEND
167 NDSR Y BEND
168 NDSR Reducer Bend
Signature of Contractor 38 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
169 NDSR Nahani Trap
170 NDSR Providing and fixing PVC vent cowl
INTERNAL RAIN WATER DRAINAGE WORK
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded
stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including
bed concrete as per standard design(embedded in the flooring / ground).( For
manhole connection rain water & soil waste pipe)
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes
172 12.41 conforming to IS: 13592 Type A including jointing with seal ring conforming to
IS: 5382 leaving 10mm gap for thermal expansion.
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A
including jointing with seal ring conforming to IS:5382 leaving 10mm gap for
thermal expansion.
12.42.1 Coupler
174 12.42.5.2 Bend 87.5 degree
175 12.42.6 SINGLE TEE WITHOUT DOOR
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm EACH 39 54.70 2133.30
diameter and weighing not less than 440 grams.
Signature of Contractor 39 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Making khurras 45x45 cm with average minimum thickness of 5 cm cement Each 9 298.25 2684.25
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
177 12.22 nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement,punning,rounding the edges and making and finishing the outlet complete.
INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the same including testiang of joints complete as
per direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes Mtr 495 537.60 266112.00
18.8.3 25mm dia nominal outer dia pipes Mtr 205 627.25 128586.25
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass
179 threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in Charge.
18.7.3 25mm dia nominal bore Mtr 583 401.55 234103.65
18.7.4 32mm dia nominal bore Mtr 233 518.75 120868.75
18.7.5 40mm dia nominal bore Mtr 82 702.95 57641.90
18.7.6 50mm dia nominal bore Mtr 38 934.15 35497.70
Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS
6911:2017 and conforming to EN-10312 standards complete with press type
fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at
1.00m spacing and also including cutting of chases and making good the walls
including testing of joints complete as per direction of Engineer -in-charge. (The
pipe length inserted in the fitting shall not be measured for payment)
Internal work - Concealed Pipe
18.86A.1 15mm dia nominal outer dia pipes Rm. 50 906.10 45305.00
181 18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1 25mm dia nominal bore each 5 622.40 3112.00
18.17.2 32mm dia nominal bore each 5 689.60 3448.00
Signature of Contractor 40 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
18.17.3 40mm dia nominal bore each 5 826.10 4130.50
18.17.4 50mm dia nominal bore each 2 1026.65 2053.30
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete :
18.18.2 20 mm nominal bore each 28 462.50 12950.00
Supply of wall hanging drinking online water cooler with bottle filler facility, Each 9 66992.38 602931.38
made by stainless steel top and heavy duty galvanized steel frame. With cooling
capacity, ADA Compliant, size 472 mm Depth X 447mm width, flexible bubbler
guard , operated between 50 to 120 PSI, Chiller unit Suitable to R134a
Refrigerant, Adjustable thermostat control, suitable for 220-230v/50-60 hz A/C
Supply Complete with all accessories which include MD-CU29, which is an EPA
registered antimicrobial copper that fights off microorganisms which include
MRSA and e-coli. The water Fountain shall possess NSF-USA, Green building,
energy star saving certification, and to be placed at different location of buidling.
As per Enginner Incharge- Make Oasis/ Filtrin/ Eureka Forbes.
Providing and fixing motorized butterfly valves the valve should be able to oprate
with hot/cold water medium between 20---120 degree working temperature, the
nominal pressure of the valve should be PN 16, leakage rate through the valve
disc should be Rate-A Bubble tight to EN1266-1 with integrated flange sealing
should ensure positive connection of the valve body seat ring and valve disc and
provide a complete isolation of the media from the body. The disc casting should
be precision machined and should give a smooth and close disc-to-seat
relationship. The stem bearing should comprise of non corrosive PTFE bushing to
completely isolate the valve seat from the body, resulting in increase control of
the valve disc, lower valve seating torque and longer valve life. The disc should
be stainless steel to offer a good corrosion resistance, superior resistance to a
broad range of chemical enviorments as well as very low co-efficient of friction
and excellent resistance to impact and ultra-violet radiation. For temperatures and
rust proof operation the valve disc should be stainless steel material.
185 NDSR Providing and fixing water meter flange end woltman water meter class A type.
Signature of Contractor 41 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
186 NDSR Providing and fixing pressure release valve with wheel of approved quality.
25mm dia nominal bore each 5 1802.15 9010.75
32mm dia nominal bore each 11 2616.02 28776.27
Total Carried over to summary 2192607.13 3126559.27
SH-18 EXTERNAL PLUMBING WORKS
Excavating trenches in all kinds of soil of required width for pipes. including
excavation for sockets and dressing of sides, ramming of bottoms, including
getting out the excavated soil & then returning the soil as required, in layers not
187 exceeding 20 cm in depth including consolidating each deposited layer by
ramming, watering, etc & disposing of surplus excavated soil as directed within a
up to 1.50 m depth
2.10.1.2 Pipes 80 mm to 300 mm diameter metre 340 352.15 119731.00
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2
(1cement : 2 fine sand ) including testing of joints etc. complete.
Providing and laying Non pressure NP 3 class (light duty) RCC pipe with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2
(1cement : 2 fine sand ) including testing of joints etc. complete.
NDSR 150 mm. dia. RCC Pipes metre 200 750.00
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded
190 stone aggregate 40mm nominal size) upto the haunches of pipes including bed
concrete as per standard design
Signature of Contractor 42 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse
sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone
aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse
sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick
with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo
neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse
sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of
neat cement complete as per standard design.
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty)
19.7.1 455x610mm internal diamensions total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15kg).
With common burnt clay FPS (non modular) bricks of class designation 75
192 19.8.1.1 Extra for depth for manholes:
Size 90x80cm with With common burnt clay FPS (non modular) bricks of class metre 2 8825.40 17650.80
designation 7.5
Inside size 90x120cms and 90cms deep including CI cover with frame
(MEDIUM duty) 455x610mm internal diamensions total weight of cover and
frame to be not less than 116 kg (weight of cover 58 kg and weight of frame
With common burnt clay FPS (non modular) bricks of class designation 75
194 19.8.2.1 Extra for depth for manholes:
Size 90x120cm with With common burnt clay FPS (non modular) bricks of class metre 2 10585.50 21171.00
designation 7.5
Providing and fixing Square- mouth SW gully trap class SP-1 Complete with CI
Grating brick masonry chamber with water tight CI Cover with frame of 300 X
300mm size (inside) the weight of cover to be not less than 4.50kg and frame to
be not less than 2.70kg as per standard design.
19.4.1 100 x 100 mm size P type
19.4.1.1 with common burnt clay F.P.S(non modular) brick of class designation 7.5 each 15 2707.65 40614.75
RAIN WATER HARVASTING
Signature of Contractor 43 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
RAIN WATER HARVESTING
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm Cum 2.24 7878.50 17641.64
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 27.66 7370.65 203877.20
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm Cum 2.99 8340.85 24955.80
Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. KG 354.92 107.85 38278.12
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm
200 19.15 cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size) as per standard design:
19.15.1 With 20x20mm square bar Nos. 10.00 544.70 5447.00
Providing and fixing in position precast RCC manhole cover and frame of
required shape and approved quality.
19.19.2.2 M.D. -10- Circular shape 500mm internal diameter No. 1.00 1172.60 1172.60
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire &
running charges of all equipments, tools, plants & machineries required for the
job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto
150 metre depth below ground level.
23.2.1.1 Drilling of 300mm dia bore hole manually. MTR 25.00 825.70 20642.50
Signature of Contractor 44 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Supplying, assembling, lowering and fixing in vertical position in bore well
unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:
12818, including hire & labour charges, fittings & accessories etc. all complete,
for all depths, as per direction of Engineer-in-charge.
23.4.2 150 mm nominal size dia MTR 15.00 807.45 12111.75
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cum 12.13 1509.80 18313.87
204 23.5 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as
per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in cum 13.11 1538.25 20166.46
205 23.6 the recharge pit, over the existing layer of boulders, in required thickness, for all
leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 cum 13.11 1538.25 20166.46
206 23.7 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all
complete as per direction of Engineer -incharge.
Gravel packing in tubewell construction in accordance with IS: 4097, including Cum 1.00 2024.50 2024.50
207 23.8 providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
requirement, all complete as per direction of Engineer-in-charge.
DESILTING CHAMBER
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm
208 19.15 cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size) as per standard design:
19.15.1 With 20x20mm square bar Nos. 12.00 544.70 6536.40
Providing and fixing in position precast RCC manhole cover and frame of
required shape and approved quality.
19.19.2.2 M.D. -10- Circular shape 500mm internal diameter No. 2.00 1172.60 2345.20
BORE WELL INSTALLATIONS
Signature of Contractor 45 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire &
running charges of all equipments, tools, plants & machineries required for the
job, all complete as per direction of Engineer -in-charge, upto 90 metre depth
below ground level.
23.1.1 All types of soil
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (RMS) pipe of required dia, conforming
to IS: 12818, including required hire and labour charges, fittings & accessories
etc. all complete, for all depths, as per direction of Engineer -in-charge.
23.4.2 150mm nominal size dia metre 40.00 807.45 32298.00
`Gravel packing in tubewell construction in accordance with IS: 4097, including cum 10.00 2024.50 20245.00
212 23.8 providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
requirement, all complete as per direction of Engineer-in-charge.
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to hour 24.00 1085.05 26041.20
establish maximum rate of usable water yield without sand content (beyond
permissible limit), with required capacity air compressor, running the compressor
for required time till well is fully developed, measuring yield of well by "V"
213 23.12 notch method or any other approved method, measuring static level & draw down
etc. by step draw down method, collecting water samples & getting tested in
approved laboratory, i/c disinfection of tubewell, all complete, including hire &
labour charges of air compressor, tools & accessories etc., all as per requirement
and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to
214 23.14 the top of bore well housing/casing pipe, removable as per requirement, all
complete for bore of:
Providing and fixing M.S. clamp of requried dia to the top of casing/housing pipe
215 23.14 of tubewell as per IS:2800 (Part I), including necessary bolts & nuts requred size
Signature of Contractor 46 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe
216 23.15 assembly of tubwell as per IS:2800 including necessary bolts & nuts of required
BORE WELL INSTALLATIONS (NON-SCHEDULED ITEMS)
Supplying & Installation of suitable Hp submersible pump B.S or K.S.B or Each 1.00 44339.40 44339.40
equivalent make with finolex cable 1x3x2.5 squmm(upto 75mtr) withflexible
conduit 25mm dia, electrical out door pannel with required electrical fitting such
217 NDSR as MCB of 0-25Amp (Havell or Indocopp or MDS make), Volt & Ampere meter
(AE make), single phase preventer (Minilac or VSP -1 make) starter (L&T or
BCH make) etc of approved make, 40mm HDPE Pipe (25 mtr) and all accessories
complete as per requirement of site.
Signature of Contractor 47 Signature
Digitally of NBCC
signed by DEEPAK
Rate (INR) Amount (INR)
S.No. DSR Item No. DESCRIPTION OF ITEM UNIT QUANTITY
DSR-2023 NDSR DSR-2023 NDSR Amount
a) Contractor shall include the rate of electrical control panels complete with all
accessories &controls, all Electrical/Mechanical items as required to operate the
system automatic/manual.
b) Contractor to select suitable HP of pumps .
c) Level Controller with sufficient nos. of low / high level alarms, contacts with
electrodes and control wiring for the automatic operation of water supply pumps,
Submersible Sump Pumps, to achieve the functional requirement shall be
provided. Control wiring between these pumps and water tanks shall be
provided.Domestic water pumps must start at low water level in overhead
domestic water tank & stop at high level in that water tank. Dry running
protection shall be provided for all the pumps.Sequencing shall be provided for
each set of pumps.
Providing, installation, testing, and commissioning of domestic water supply
218 NDSR pump for terrace tank filling, installed at pump room, complete with starter,
wiring, and necessary accessories, as per approved specifications
Set of Two Pumps (1 Working + 1 Assist)
Design, Engineering, Supply, Installation, Testing & Commissioning of 15 KLD JOB 1.00 950000.00 950000.00
Water Treatment Plant - Complete Job
Raw Water & Treated Water Tanks (including 15000 Litres Treated Water Tank)
Pressure Sand Filter + Activated Carbon Filter + Micron Filters
Water Softener / UF / RO System (as per raw water quality)
UV Disinfection + Chlorine Dosing System
Piping, Valves, Instrumentation & Control Panel
Civil Works (Foundation, Shed, Platforms etc.)
Total Carried over to summary 1749313.65 1114339.40
Signature of Contractor 48 Signature
Digitally of NBCC
signed by DEEPAK
Detailed Estimate Based On DSR-2025 With Cost Index & Market Rate
Project - Construction of 150 bedded Vishram Sadan at GGH Hospital in Kurnool, Andhra Pradesh under CSR activity of POWERGRID
Name of Work- TENDER BOQ E&M Work
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SH-1 INTERNAL ELECTRIFICATION WORK
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
1 1.10.3 recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required. Group C
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
2 1.12 alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the
3 1.14 following sizes of FRLS PVC insulated copper conductor, single core cable
in surface/ recessed medium class PVC conduit as required.
Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
4 1.18 cable in the existing surface/ recessed steel/ PVC conduit as
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
5 1.19 with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
Signature of Contractor 49 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying and fixing of following sizes of medium class PVC conduit along
6 1.21 with accessories in surface/recess including cutting the wall and making good
the same in case of recessed conduit as required.
Supplying and fixing following modular switch/ socket on the existing
7 1.24 modular plate & switch box including connections but excluding modular
plate etc. as required.
a 1.24.6 Telephone socket outlet Each 46 168.00 7,728.00
b 1.24.7 TV socket outlet Each 41 168.00 6,888.00
c NDSR RJ45 socket cat 6 with shutter Each 6 421.58 2,529.48
Supplying and fixing two module stepped type electronic fan regulator on the
8 1.25 existing modular plate switch box including connections but excluding
modular plate etc. as required.
Supplying and fixing following size/ modules, GI box alongwith modular
base & cover plate for modular switches in recess etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 3 pin 5/6 A
10 1.31 modular socket outlet and 5/6 A modular switch, connections etc. as
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 6 pin 5/6 &
11 1.32 15/16 A modular socket outlet and 15/16 A modular switch, connections etc.
as required. Each 155 659.00 1,02,145.00
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all
12 1.35 sizes and shapes containing upto two GLS/CFL/LED lamps per fitting,
complete with all accessories including connections etc. as required. Each 56 151.00 8,456.00
Supplying and fixing call bell/ buzzer suitable for single phase,
13 1.38 230 V, complete as required.
Signature of Contractor 50 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Installation of exhaust fan in the existing opening, including making good the
14 1.50 damage, connection, testing, commissioning etc. as required.
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing
15 surface/ recessed Steel/ PVC conduit as required.
a NDSR 1 run of cable Meter 270 57.00 15,390.00
Wiring for group controlled (looped) light point/fan point/exhaust fan point/
call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC
16 1.55 insulated copper conductor single core cable in surface/ recessed PVC
conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated
copper conductor single core cable etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A
modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as
required. (For light plugs to be used in non residential buildings). Each 44 757.00 33,308.00
Supplying & fixing suitable size GI box wih modular plate and cover in front
on surface or in recess including providing and fixing 25 A modular socket
18 1.57 outlet and 25 A modular SP MCB, "C" curve including connections, painting
etc. as required. Each 120 807.00 96,840.00
Supplying and fixing following way, horizontal type three pole and neutral,
sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with
19 2.4 tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,
powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the
20 2.10 existing MCB DB complete with connections, testing and commissioning etc.
Signature of Contractor 51 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
b 2.10.3 Double pole Each 5 696.00 3,480.00
c 2.10.5 Three Phase & Neutral Each 16 1301.00 20,816.00
Supplying and fixing following rating, double pole, (single phase and
neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity
current 30 mA in the existing MCB DB complete with connections, testing
and commissioning etc. as required.
Supplying and fixing 63Amp, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current 300 mA
in the existing MCB DB complete with connections, testing and
commissioning etc. as required. Each 2 5107.37 10,214.74
Supplying and fixing 40/63A rating, 415 V, 10 kA, "C" curve, miniature
23 NDSR circuit breaker suitable for inductive load of Four poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
Supplying and installing following size of perforated painted with powder
coating M.S. cable trays with perforation not more than 17.5%, in convenient
24 4.1 sections, joined with connectors, suspended from the ceiling with M.S.
suspenders including bolts & nuts, painting suspenders etc as required.
a 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 100 623.00 62,300.00
b 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 70 866.00 60,620.00
c 4.1.7 600 mm width X 50 mm depth X 1.6 mm thickness Each 70 1482.00 1,03,740.00
Signature of Contractor 52 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
LED Down lighter (SMD Type) (System lumen efficacy >135 lm/Watt)
Supplying, installation, Testing & Commissioning of LED Recessed /
surface Down lighter (Round /square/Rectangular) SMD type of following
body material with PMMA and prismatic diffuser and construction as per IS :
10322 with driver as per the requirement with Driver efficiency >85%,
Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -
15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short &
Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR
(Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life
time (LED,Driver & electrical circuitry), life time of minimum 50000
25 8.3 Burning Hours with , 70% of initial Lumen maintained till life ends as per
LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K
/ 6000°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color
Matching) <3, Maximum power consumption should not more than the
specified rating and Fixture shall be of relevant BIS standard and trade mark
certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/
Screen printing on housing. OEM must have its own in house NABL lab
setup for all testing facilities for LED fixtures. complete in all respect i/c
connections with 1.5 sq mm FRLS, PVC insulated copper conductor single
core cable and earthing etc. as required
with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt
output . LM79 & LM80 Test report from NABL lab for all testing required
for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be
as approved by Engineer-in-Charge as per requirement. (Thermal
management: heat sink of aluminum housing such that LED junction
temperature shall not rise above 90°C).
Powder coated die cast / Extruded aluminum Body including trim.
SITC of 12W Extruded aluminium batten available in 2ft run length with
26 NDSR multiple lumen packages and suitable for surface, wall & conduit mounting
(with accessories) complete in all respect. Each 54 430.34 23,238.36
Signature of Contractor 53 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire
having pressure diecast housing with driver set confirming to IP 65 and
above Protection, IK08, High purity / transmisivity UV stablized Non
NDSR yellowish diffuser/ Reflector for uniform light distribution, ditachable driver
set, suitable for 24hrs continuous operation complete in all respect.
1200 system lumen, >120lm/W, PF>0.95, CRI>70, >300V, over voltage
protection, 4KV internal surge protection with 5 year warrenty. CAT-AAA
LED Batten light (System lumen efficacy >135 lm/Watt) Supplying,
installation, Testing & Commissioning of LED surface mounted Batten light
of following body material and construction as per IS : 10322 with driver
(Replaceable) as per the requirement with Driver efficiency >85% ,Operating
voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40
deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit
protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker
free (flicker should be below 5 %), life time (LED,Driver & electrical
circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen
maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/ 6500°K
(As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3,
Maximum power consumption should not more than the specified rating and
28 Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).
Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on
housing. OEM must have its own in house NABL lab setup for all testing
facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq
mm FRLS, PVC insulated copper conductor single core cable and earthing
etc. as required with Minimum 5 year OEM warranty. System lumen efficacy
>135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all
testing required for LED fixtures as per BIS shall be submitted. Shape size
and CCT shall be as approved by Engineerin- Charge as per requirement.
(Thermal management: heat sink of aluminum housing such that LED
junction temperature shall not rise above 90°C).
Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20
Supply of 9W LED Bulb complete in all respect as per engineer-in- charge.
Signature of Contractor 54 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supply of 250mm exhuast fan having Built with a durable powder-coated
metal body, this 150 mm exhaust fan brings both style and resilience to
kitchens, bathrooms, or compact spaces. Equipped with a fast-spinning
1200 RPM motor, it swiftly eliminates steam, smoke, and odors for a fresher
indoor atmosphere. The compact 250 mm sweep ensures a perfect wall or
window installation without sacrificing airflow. Precision balanced metal
blades deliver steady, powerful airflow while keeping vibrations and noise
minimal. Designed to be energy-efficient, it uses approximately 48 W,
30 NDSR offering strong performance without raising your electricity bill. Operates
quietly around 40–45 dB, making it ideal for use near bedrooms, studies, or
any quiet area. Comes with a sturdy steel bird guard to prevent insects and
debris from entering, protecting hygiene and motor health. Featuring a
corrosion-resistant finish, it stays looking fresh and functioning well even in
humid conditions. Maintenance is hassle-free—blades and grill detach easily
for quick cleaning to ensure consistent airflow.
Signature of Contractor 55 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
LED Flood Light, powder coated pressure die cast aluminum (System
lumen efficacy ≥120 and <135 lm/Watt)
Supplying, installation, Testing & Commissioning of Flood Light, powder
coated pressure die cast aluminum body with built in or separate driver as per
the requirement with Driver efficiency >85%, Input voltage: Input voltage:
140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg
centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,
Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-
66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as
per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application
and the project requirement deg, suitable tilt able fitting, life time
(LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with
70% of initial Lumen maintained till life ends as per LM80 extrapolation IES
per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum
power consumption should not more than the specified rating and Fixture
shall be of relevant BIS standard complete in all respect i/c connections with
1.5 sq mm FRLS, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System lumen
efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from
NABL lab for all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in-Charge
as per requirement. (Thermal management: heat sink of aluminum housing
such that LED junction temperature shall not rise above 90°C). 50 watt
Signature of Contractor 56 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Brush Less Direct Current (BLDC) Fan without Remote-- Supply,
Installation, Testing and Commissioning of ceiling fan with Brush Less
Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(
Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit,
safety rope, copper winding, steel/Al body Power Factor not less than 0.9,
Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as, per IS
: 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for
32 9.2.3 operation with regulator for speed control and all remaining accessories
including safety pin, nut bolts, washers, temperature rise=75 0C (max.),
insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single
phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external
connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor
single core cable and earthing etc. as required. -- 1200mm, service value ≥
6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum
Supply and fixing hexagonal Round G.P.fan box approved make made up of
1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe
entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P.
DSR Civil Sheet made upper & lower cover duly screwed. Fixing with wiring conduit
2023 10.18 laid in the R.C.C. roof before concreting alongwith supply of all material,
labour, T&P etc. required for proper completion of the work.
Lightning Arrestor Work
Providing and fixing of lightning conductor finial, made of 25 mm dia 300
34 6.1 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick
G.I. base plate including holes etc. complete as required. Each 4 609.00 2,436.00
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or
35 6.3 any other metallic object) by riveting / nut bolting/ sweating and soldering etc
as required. Each 80 139.00 11,120.00
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
35 6.6 wall for lightning conductor complete as required.(For horizontal run) Each 300 148.00 44,400.00
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
wall for lightning conductor complete as required.(For vertical run) Each 200 238.00 47,600.00
Signature of Contractor 57 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Lightning Counter :Supply and installation of counting the number of
37 NDSR lightning strikes without any power supply.
Test Link :Supply and installation of test link in weather proof IP 65 BOX
38 NDSR complete in all respect.
Supply, installation, testing and commisioning of 2 x 25W LED Aviation
abstruction light medium bay type 62, complete with lamp, lamp holder,
Condenser necessary connecting wire, 1 X 25 AV with all necessary
hardware, accessories as required for complete installation. Rate shall include
the cost of necessary steel structures , fixing arrangements in this item. Refer
Online UPS- Input supply: Three Phase, Output supply: Three Phase--
Supplying, installation, Testing & Commissioning of of following capacity at
full load (Unity Power Factor) at operating temperature 0 to 40 deg C,
Relative humidity 0 to 95%, Online double conversion true sine wave
Uninterrupted hot swappable (allow for the replacement or addition of
battery modules without shutting down the entire system) modular Power
Supply (UPS) system with N+1 modules (N denotes total number of moduels
40 requird for rated capacity). The UPS shall include a Rectifier, inverter,
battery bank suitable for 30 minutes back up (Battery VAH capacity shall not
be less than 1600 VAH per KVA of UPS rating per Hour backup time) on
full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass
switch alongwith provision for manual bypass, suitable isolation transformer
for additional protection against neutral faults etc. UPS shall have inbuilt
phase sequence correction. The UPS systems offered are to be of the latest
technology with Digital Control Microprocessor based for reliable operation
using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier &
inverter (3 Level) with PWM (Pulse Width Modulation). The quality of
design, manufacturing and inspection process should confirm to the relevant
International standards such as IEC/EN/VDE. The operating efficiency of the
UPS systems shall be >96% while operating on battery mode and delivering
quality power to the 100% non-linear loads. Current total harmonic
effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC
Signature of Contractor 58 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
inductor (L) and a capacitor (C)) filters shall be included in UPS cost),
extreme power factor kit to be included to limit the input power factor (PF) to
0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be
kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to
0.7 leading power factor loads. UPS shall be suitable for incoming supply
AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415
Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave
output. Non condensing, noise level less than 60db at 1 meter distance,
protections: Input Under voltage over voltage, abnormal out voltage, battery
over charging, output over current, short circuit protection, battery deep
discharge protection, 10KV surge. UPS must comply with low voltage
electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part
I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type
UPS. Communication RS232/RS485/SNMP port open protocol for BMS
integration, all hardware & software for iOT Communication as per approved
by Engineering in charge. Required battery racks and interconnecting copper
conductor cables of suitable size and connectors and all required accoseries
are inclusive of the cost). This system must provide a means for logging and
alarming of all monitored points plus email notification. Forced air-cooling
with integral inbuilt fans with redundancy (if one fan fail UPS should be able
to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance.
The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and
CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC
Display / LED ) to display : a) Input: Voltage, current, Frequency. b) Bypass:
Voltage, Frequency. c) Output: Voltage, frequency, Current.
Signature of Contractor 59 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage.
f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On
LCD/LED): UPS should capture and display up to 3000 events like: Over
temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /
Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical
Data: No. of power failures / Transfers to Bypass / Total Running time, etc. i)
Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the
load /UPS Fault /Battery charging and discharging, overload, battery voltage
and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm,
UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over,
Under Voltage, Battery Over, Under Voltage, Over Load and short circuit,
Over Temperature. The UPS should have QR code which should contain
drawing, test report OEM manual,Geo- Tag of manufacturing location etc
26.2.3 30KVA (Each Power module shall be < 10 KVA) Set 1 505748.00 5,05,748.00
Total Carried over to summary 24,050.85 77,91,875.50 2,60,522.54
SH-39 CCTV Surveillance Work
Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP
LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category
6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL
verification program for compliance with
ANSI/TIA-568.2-D standard. Outer diameter should be in the range of
6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending
Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force: 11.5Kg etc.
complete as required.
Supplying Installation Testing and Commissioning of 24 port Cat6 Patch
Panel loaded. Must be of 1U height with clear label holders and white label
42 39.11 with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification Each 1 5,278.00 5,278.00
program certificate for compliance with ANSI/TIA-568.2-D etc. complete as
Signature of Contractor 60 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, Installation, Testing and commissioning of CAT6 Copper
Information Outlet (IO) with face plate of color as per site requirement,
should have ETL/UL verification program certificate for compliance with
43 39.14 ANSI/TIA-568.2-D. All copper Cable and Components should be from same Nos 18.00 212.00 3,816.00
OEM to maintain compatibility and interoperability etc. complete as required.
Supplying, installation, Testing and commissioning of following capacity 24
port Layer 2 indoor Network Switch having features and specifications etc.
as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and
additional 2 X 10G Base -T with 4
X SFP Ports with non-blocking architecture by having Switching capacity of
min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC
44 39.3 table. Console Port, USB port, Stacking support of min. 8 units per stack.
Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU
Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD
Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback
Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP.
VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN,
VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS ,
TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR,
Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP
Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP
traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying
Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV
surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access
ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be
on Trusted Telecom Portal of Department of Telecommunication,
Government of India etc. complete as required.
24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher
39.3.1 with each copper port supporting 802.3at PoE+ min. Nos 1.00 1,25,393.00 1,25,393.00
45 Hard Disk Drive
Signature of Contractor 61 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, Installation, Testing and Commissioning following capacity
Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB
Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI,
ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-
Scheme, TUV, UL Certifications.
Supplying Installation Testing Commissioning of Client PC System
comprising of PC Hardware with minimum11th Gen Intel® I7 processor
CPU E5-2640 x64 (or better), compatible with dual and quad core processors
minimum 3.1 Ghz and 8GB or higher RAM,
42.2 Hard Drive Space of 256 GB SSD or better, Video card and monitor capable Nos 1.00 90,698.00 90,698.00
of 1920 x 1080 pixel resolution or better with Ethernet adapter (10/100/1000
Mbps with RJ-45 connector) with 2 GB or higher Graphics card suitable for
BMS System complete etc. as required.
Supplying, Installation, Testing and Commissioning of following size LED
display (LED monitor) industrial grade with 3840x2160 resolution or better,
USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2,
HDR 10/10+, brightness: 500-nits or better, Video wall mode should be
47 42.4 available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°,
response time less than 12ms, Display control shall be on monitor screen and
programmable with remote (remote shall be supplied with system), Key
Board, Optical Mouse, etc. as required.
Supplying, installing, testing and commissioning of HDMI to HDMI Cable.
Supplying, Installation, Testing and commissioning of small form-Pluggable
49 39.6 (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc.
complete as required.
Supplying, Installation, Testing and commissioning of following CAT6 Patch
50 39.12 Cord should have ETL/UL verification program certificate for compliance
with ANSI/TIA-568.2-D etc. complete as required.
Signature of Contractor 62 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
39.12.2 Copper Patch Cords of length 3m (10ft) Each 36.00 227.00 8,172.00
Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome
Camera having following specifications and features etc :-
1)Type of Camera: Dome Camera
2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image
even at night condition
3) Signal System: PAL/NTSC
4) Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or
5) Imaging: 1/3s to 1/30000s Shutter Support, Auto Gain Control , White
Balance- Auto, Back Light Compensation, Multi zone Privacy Masking,
HLC, Digital Watermarking.
6) On Screen Display: Camera should display Camera title, Date & Time in
51 40.5 live & recorded video both.
7) Signal to Noise Ratio: > 50 dB
8) Day & Night: True Day & Night High Performance Mechanical IR cut
filter with auto switch, IR Source Inbuilt IR LED's with effective distance
upto 50 Mtrs integrated IR 30 Mtrs for colour view in night.
9) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A,
G.711Mu, G.726, AAC, G.723
10) Wide Dynamic Range: WDR (120dB or more)
11) Digital Noise Reduction: DNR (2D/3D) On/Off
12) Streaming: Triple streaming, configurable
13) Video Streaming & Frame Rates: Triple streaming, configurable Main
stream: 5/6MP @25/30 fps, Sub streams: D1@25/30 fps or better
Signature of Contractor 63 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
14) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness
adjustable through client software or web browser
15) Profile Management: User configuration import, export
16) Security: User Authentication, Water Marking
17) Onboard Storage: Camera should support built-in Micro
SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with
minimum 128GB memory Card.
18) Recording Management: Format SD, overwrite, storage management,
video to NAS device,
19) Edge Analytics : Tripwire, Intrusion, Motion Detection
20) Alarm Trigger : Motion/tampering detection; network disconnection
detection; IP conflict detection; memory card state detection; memory space
21) Alarm Support: It should have 1/1 Alarm In/ Out Port
22) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out
Port for external Mic. and Speaker (As per site requirement) with G.711U/A/
G.711Mu/AAC/ G.726 audio compression
23) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP,
HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP,
RTSPS, unicast,
24) System Capability: ONVIF
25) VMS: Camera shall support open source VMS
26) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration
encryption, trusted execution, Digest, security logs, , account lockout, video
encryption, IP/MAC filtering, HTTPS, trusted upgrade.
27) Ethernet: 1 RJ 45 10/100 Ethernet port
28) Power Input: The camera should support simultaneous dual power
input—12 VDC (via power adapter) and PoE—to ensure continuous
operation in the event of a failure in one power source.
29) Power Requirement: 12VDC/24VDC/PoE (802.3af)/ePoE
30) Enclosure: IP67 weather proof, IK10
31) Operating Condition: Ambient Temperature:- (-) 05°C to 50°C, humidity
95% (max) (non-condensing)
32) IR life: 40000 hours or higher
33) Video Bit rate: 32 KBPS - 8 MBPS or better
34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS
5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per
i. 40.5.1 site requirement) Dome Camera. Nos 2.00 12,800.00 25,600.00
Signature of Contractor 64 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better
ii. 40.5.2 Varifocal Motorized lens Dome Camera. Nos 14.00 26,993.00 3,77,902.00
Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR
Bullet Camera having following specifications, type of lens and features etc :-
1) Type of Camera: Bullet Camera
2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image
even at night condition
3) Signal System: PAL/NTSC
4) Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or
5) Imaging: 1/3s to 1/30000s, Auto Gain Control , White Balance- Auto,
Back Light Compensation, Multi zone Privacy Masking, HLC, Digital
52 40.6 6) On Screen Display: Camera should display Camera title, Date & Time in
live & recorded video both.
7) Signal to Noise Ratio: > 50 dB
8) Lens Type & Focus: as given below.
9) Day & Night: True Day & Night High Performance Mechanical IR cut
filter with auto switch, IR Source Inbuilt IR LED's with effective distance
upto 50 Mtrs integrated IR and 30 Mtrs for colour view in night.
10) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A,
G.711Mu, G.726, AAC, G.723
11) Wide Dynamic Range: WDR (120dB or more)
12) Digital Noise Reduction: DNR (2D/3D) On/Off
13) Streaming: Triple streaming, configurable
14) Video Streaming & Frame Rates: Triple streaming, configurable
Signature of Contractor 65 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Main stream: 5MP/6MP @25/30 fps, Sub streams: D1@25/30 fps or better
15) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness
adjustable through client software or web browser
16) Profile Management: User configuration import, export
17) Security: User Authentication, Digital Water Marking
18) Onboard Storage: Camera should support built-in Micro
SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with
minimum 128GB memory Card.
19) Recording Management: Format SD, overwrite, storage management,
video to NAS device,
20) Edge Analytics: Tripwire, Intrusion, Motion Detection
21) Alarm Trigger : Motion/tampering detection; network disconnection
detection; IP conflict detection; memory card state detection; memory space
22) Alarm Support: It should have 1/1 Alarm In/ Out Port
23) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out
Port for external Mic. and Speaker (As per site requirement) with G.711U/A /
G.711Mu/ AAC/ G.726 audio compreesion
24) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP,
HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP,
RTSPS, unicast,
25) System Capability: ONVIF
26) VMS: Camera shall support open source VMS
27) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration
encryption, trusted execution, Digest, security logs,
account lockout, , video encryption, IP/MAC filtering, HTTPS, trusted
28) Ethernet: 1 RJ 45 10/100 Ethernet port
29) Power Input: The camera should support simultaneous dual power
input—12 VDC (via power adapter) and PoE—to ensure continuous
operation in the event of a failure in one power source.
30) Power Requirement: 12VDC/24V DC/PoE (802.3af)/ePoE
31) Enclosure: IP67 weather proof, IK10
32) Operating Condition: Ambient Temperature:- ()05°C to 50°C, humidity
95% (max) (non-condensing)
33) IR life: 40000 hours or higher
34) Video Bit rate: 32 KBPS - 8 MBPS or better
35) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS
Signature of Contractor 66 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per
i. 40.6.1 site requirement) outdoor bullet Camera Nos 4.00 12,525.00 50,100.00
Supplying Installation Testing and Commissioning of following Channel
Network Video Recorder (NVR) with camera licenses to record for all
channels having specifications and features etc as mentioned below :
1) Network Video Recorder Embedded/ Installed OS (Linux) along with
Camera Licenses to record per NVR and to provide a live view, storage and
simultaneously Multi-channel playback of all IP camera or more and must be
ONVIF with minimum support of 384 Mbps incoming Bandwidth.
2) NVR should support video compressions : H.265 or better, H.264,
3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way
Talk with G.711U/A, G.711u, PCM, G726 audio compressions.
53 40.11 4) Intelligent auto power on when power resumes after power outage. -
5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/
Slot and RAID support of RAID 0/1/5/6/10.
6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x
RS485, 1x RS232, 1x eSATA Port
7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0,
8) Video Output Ports: 2x HDMI and 2 VGA
9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type
of external sensors and output devices like hooter/ Siren etc.
Signature of Contractor 67 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum
5 designated mobile number for power failure, HDD failure, vandalism,
tempring, network disconnection and panic
11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad,
Android Phone) for alerts and viewing.
12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS,
SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search,
Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI,
SDK and OEM Cloud for remote monitoring without any public IP need.
13) Standards: CE, FCC, RoHS, BIS Certified
14) Power Supply : Should support AC100-240V,
50/60Hz Power supply 15) Operating Condition : -5°C to 50°C, humidity
90% (max) (non-condensing)
16) The VMS application shall support all the features & functionalities of
the offered cameras.
17) VMS should consist Licenses for all channels to record Cameras with
General, motion detection, intelligent, alarm and POS recording modes. VMS
should be provided with Camera Licenses , with no dependency of VMS
licenses by binding with the MAC
address of the cameras to achieve the functionality.
18) The NVR OEM shall be responsible for providing a mobile application
compatible with both Android and iOS devices, enabling remote monitoring
and playback of cameras/NVR footage.
19) The OEM must provide its own DDNS server hosted in India,
eliminating the need for a public IP address for remote monitoring
Signature of Contractor 68 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
over the Internet.
20) Must support Continuous, Alarm, Motion, Instant, Panic Recording
21) It should support Resolution: 32MP; 24MP; 16MP;
12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF
22) When alarm recording is enabled and an event occurs, you can click the
alarm icon on monitoring page to view the alert details. The snapshot
function is supported on monitoring and playback page
23) The Network Video Recorder (NVR) shall be configured to send email
whenever a system message is created or an alarm event occurs. The email
server shall be a valid SMTP server. Each recipient email address shall be
configured to receive any combination of critical, warning, or informational
messages or alarm notifications. When an alarm occurs, the email message
includes the NVR name, time of alarm and a list of camera that is configured
to record upon alarm
24) It should have Web and GUI interface.
25) Built-In Artificial Intelligence: NVR should have built-in
AI :-- 2 Channel face detection and recognition, - Minimum 4 Channel
perimeter protection, - Minimum 8 Channel Smart Motion Detection 26)
Face Recognition Database Capacity: It should
support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or
more with Face Detection speed of 12 face images/sec and facility to add
Name, gender, birthday, address, credential type, credential No., countries &
regions and state to each face image.
27) Face & Human Attributes Search: Search Pictures/ Video by
Signature of Contractor 69 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Gender, age group, glasses, expressions, face mask, beard, Top color, top
type, hat, bag, age, gender and umbrella.
28) ANPR Capability: It should support ANPR Camera with License plate,
plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt,
vehicle registration location etc vehicle attributes.
29) Alarm Notifications based on: Motion detection, video tampering, video
loss, scene changing, PIR alarm, Camera external alarm, Face detection, face
recognition, perimeter protection (intrusion and tripwire), ANPR, people
counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage
Error, IP Conflict and abnormal behavior of fan, cybersecurity exception
30) Alarm Notification should be linked with Recording, snapshots, Camera
external alarm output, buzzer, logs, presets and email.
31) General AI Based Search: Search Pictures by channel, time, event type,
target classification (Fall Detection, People Approach Detection, People No.
Exception Detection, People Staying Detection, Violence Detection.
32) Smart playback function: Should support smart search for the selected
area in the video and smart playback to improve the playback efficiency
33) VCA (Video Content Analytic): Should support multiple video contented
analytics based on camera analytics
34) Analytics by NVR: Perimeter protection and face recognation
32 Channel Network Video Recorder (NVR) having
screen: 1/4/8/9/16
Total Carried over to summary - 8,60,625.00 1,206.82
Signature of Contractor 70 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SH-28 Fire Alarm Work
Supplying, installation, testing & commissioning of main
control and indicating panel made out of 16 SWG MS sheet
to accommodate the following items duly powder coated in
approved colour with louvers for ventilation, locking
arrangement, audio and visual indication for fire alarm and
public address system, monitoring system including
connections, interconnections etc complete as required.
54 10 Zone panel for fire alarm system
250 Watt amplifier racks suitable for operation on 230V
AC/24V DC supply conforming to IEC-268-3 complete with all
accessories as required - 2 Nos.(one to act as standby)
Talk back master station with LED PTT (press to talk) push
button for operation on 230V AC/24 V DC supply conforming
to IEC-268 for simplex mode of operation/communication
suitable for 20 Nos.talk back unit -1 set.
Annoucement control desk suitable for selection of different
zones selectively and ON ALL CALL switch with visual
indication etc. complete as required -1 set.
Amplifier change over switch for inter changing amplifier -1 No.
Monitor panel for loudspeaker complete with output
selector, ON/OFF switch, fuse, visual indications etc.
complete as required- 1 No.
Gooseneck microphone with stand and ON/OFF switch- 1 No.
Main ON/OFF switch, fuse indication lamps, DC and AC
voltmeters & ammeters, terminal blocks etc. complete as
required -1 set.
Battery charger trickle cum boost to take complete load of
fire alarm & PA system complete with all accessories
including providing & fixing of 2 nos.12 volt, 60 AH each
sealed maintenance free batteries -1 set.(Please refer to CPWD Correction
Slip No. 1 dated 27.11.2025 for updated rates.).
Supplying, installation, testing & commissioning of addressable fire control
55 28.2.10 module complete as required. NOS 3 3,156.00 9,468.00
Signature of Contractor 71 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, installation, testing & commissioning of manual call
boxes of MS construction in surface/recess with stainless steel
56 28.1.3 chain & hammer assembly complete with glass and push button NOS 4 513.00 2,052.00
etc. as required.
Supplying, installation, testing & commissioning fire alarm
sounder with facility to make announcement, mounted in M.S.
57 28.1.6 box (16 SWG) with hinged cover plate & suitable for operation NOS 4 600.00 2,400.00
with amplifier i/c line matching transformer etc. complete as
Supplying, installation, testing & commissioning of fire fighter telephone
58 28.2.17 handset complete as required. NOS 2 6,016.00 12,032.00
Supplying, installation, testing & commissioning talk back slave
station in surface/recess suitable for operation on simplex
59 28.1.8 mode complete with P.T.T. knob & speaker/microphone NOS 4 963.00 3,852.00
enclosed in a M.S.(16 SWG)/ ABS box with break glass in front
etc. complete as required.
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V
rated with annealed copper conductor having glass mica fire barrier tape
60 28.5.1 covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber Metre 250 386.00 96,500.00
(EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH
outer sheath complete as required.
Supplying and fixing of following sizes of steel conduit along with
accessories in surface/recess including painting in case of surface conduit, or
61 1.20.2 cutting the wall and making good the same in case of recessed conduit as Metre 250 289.00 72,250.00
required.-25 mm dia
Total Carried over to summary - 2,73,893.00 -
Signature of Contractor 72 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SH-27 Fire Fighting Work
(a) Supplying, installation, testing and commissioning of electric driven
terrace pump conforming to IS 12469: 2019 suitable for automatic
operation and consisting of following, complete in all respects, as required:
(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical seal as
62 27.4.2 (c)Suitable HP squirell cage induction motor TEFC type suitable for
operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of
protection for enclosure, horiziontal foot mounted type with Class
'F' insulation, conforming to IS-12615: 2018.
(d) M.S.fabricated common base plate, coupling, coupling guard, foundation
bolts etc.as required.
(e) Suitable cement concrete foundation duly plastered and with anti
vibration pads.
Supply, installation, testing, and commissioning of a Fully Automatic Star-
Delta Starter suitable for a 12.5 HP (9.3 kW) 3-phase, 415V, 50Hz motor.
63 NDSR The unit shall be enclosed in a dust and vermin-proof IP54/55 powder-coated EACH 1 16780 16,780.00
CRCA sheet steel enclosure complete in all respect.
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe
conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like
64 27.7.7 elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the
wall/ceiling with suitable clamp/support frame and painting with two or more
coats of synthetic enamel paint of required shade complete as required :
Supplying and fixing single headed internal hydrant valve with instantaneous
Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI
65 27.9 marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless
Steel cap and chain as required
27.9.1 Single headed Gunmetal EACH 4 8208 32,832.00
Signature of Contractor 73 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm
66 27.18 nominal internal diameter size nozzle conforming to IS 903 suitable for
instantaneous connection to interconnect hose pipe coupling as required:
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia
67 27.16 male and female couplings duly bound with GI wire, rivets etc. conforming to
IS 636 (type-A) as required :
Supplying and fixing first-aid Hose Reel with MS construction spray painted
in post office red, conforming to IS 884 complete with the following as
(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced)
68 27.17 type -2 as per IS:12585
(b) 20 mm nominal internal dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipmets on wall.
(d)Connections from riser with 25 mm dia stop gunmetal valve & M.S. Pipe
Supply and fixing of Fire Shaft door fabricated out of G.I. Sheet and frame,
door shall be 900mm x 1500mm min with double leaf. & fixed with 4 mm
69 NDSR thick Glass, suitable Rubber beeding and Locking arrangment. Quoted rate EACH 4 8303.08 - 33,212.32
shall be included all fasterners etc, and complete shutter shall be powder
coated of approved colour both inside and out side.
70 NDSR Providing/Fixing Fire man axe. Each 4 1,085.79 - 4,343.16
CO2 type Fire exitinguisher ISI marked confirming to IS:15683 lates. -
Capacity 4.5 kg complete with delivery hose horn, squeeze grip release valve,
locking arrangement, operating temperature -30°c to +55°c, supplied with
71 NDSR body bearing IS 7285 mark and approved valve as per IS 3224. Co2 Gas as -
per IS:15222. externally painted with PO Red Shade No. 538 of IS 5,
operation manual and floor stand or wall mount Bracket including
accessories as required as per site condition.
Signature of Contractor 74 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Powder Fire exitinguisher (stored Pressure Type) (Powder pressurized with -
dry nitrogen gas at 15 bar) capacity 4kg duly ISI marked conforming to
IS:15683:2006/latest, with IS 14609 ISI marked ABC powder complete with
squeeze grip release valve, discharge pipe, locking arrangment, pressure
72 NDSR gauge, operation maual, Body Hydrotested at 35 bar, operating temperature-- -
30°c to +55°c, external epoxy powder coating with PO Red shade No. 538 of
IS 5, and floor stand or wall mount Bracket including accessories as required
as per site condition.
Supplying & fixing air vessel made out of 250 mm dia,8 mm thick MS sheet,
1200 mm in height with air release valve on top and flanged connection to
73 27.20 riser, drain arrangement with 25 mm dia gun metal wheel valve with required Each 1 19,402.00 19,402.00
accessories, pressure gauge and painting with synthetic enamel paint of
approved shade as required.
Supplying and fixing of fire brigade connection of cast iron body with gun
27.19 metal male instantaneous inlet coupling complete with cap and chain as reqd. -
for suitable dia MS pipe connection conforming to IS 904 as required.
27.19.1 2 way-100 mm dia M.S. Pipe EACH 1 7262 7,262.00
Providing, installation, testing and commissioning of non-return valve of
following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,
75 27.14 nuts, 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as -
required washers etc.as required :
SProviding & fixing flow switch in following sizes M.S. pipe including
76 27.23 connection etc as required. ,
Total Carried over to summary - 6,04,017.00 1,61,636.84
Signature of Contractor 75 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SH-21 Lift Work
Supplying, Installation, Testing & Commissioning of following capacity
passenger Machine room less (NDSRL) lift with regenerative drive as per
CPWD General Specification for Electrical Works (Part-III Lift & Escalator)
2003, BIS Codes, NBC 2016 as amended upto date having provision for
barrier free access as per Harmonised Guidelines & Standards for Universal
Accessibility in India - 2021 of MoHUA,
serving different floors in the lift shaft as per detailed specifications enclosed
and as under including all other equipment and accessories complete as
(i) Speed-1 MPS
(ii) Floors-5 (G+4)
(iii) Travel -17 Meters (approx.)
77 21.1 (iv) Stops & opening- 5 stops and 5 openings
(v) Controller: A.C. variable voltage & variable
(vi) Automatic rescue device (ARD) complete with dry
maintenance free batteries as required.
vii) Operation: Microprocessor based single automatic
push button/simplex selective collective/duplex
collective selective with/without attendant
(viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires
(ix) Car Enclosure: Stainless steel scratch proof
Signature of Contractor 76 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
(Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel
decorative ceiling with fans (indirect throw) and LED fitting.
(x) The car flooring should be smooth and antiskid as approved by engineer-
(xi) Type of doors (a) Car: Power operated, centre opening horizontal
sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline
Finish). (b) Landing doors: stainless steel scratch proof .
(xii) A hand rail not less that 600mm long at 900mm above floor level to be
fixed adjacent to control panelin the lift car.
(xiii)Voice announcement system in the car to announce the position of the
elevator in the hoist way as the car passes or stops at floor served by the
(xiv) Closed loop Control System, protection against power fluctuation, self
diagnostic control, Landing doors 2 hours Fire rated, Overload detection and
protection, Overspeed Governer, Dot Matrix LED D &
P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared
curtain covering almost the entire height of the lift car door, Alarm horn, Anti
Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable
NVR and HDD for 30 days storage
backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with
battery backup for fan and light fitting for 1 hour, pit ladder.
(xv) The lift doors shall have a vision panel to enable persons with hearing
impairment to signal for help or assistance in the event of an
(xvi) An appropriate technological support be provided (Through
emergency messaging |services or alarms etc.) to respond to the emergency
requirements of person with hearing impairment or deafness.
(xvii) In case of failure of ARD or other electronic
devices, a provision of manual rescue be provided
Signature of Contractor 77 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, Installation, Testing & Commissioning of following capacity
passenger cum bed lift Machine room less (NDSRL) Bed lift with
regenerative drive as per CPWD General Specification for Electrical Works
(Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto
date having provision for barrier free access as per Harmonised Guidelines &
Standards for Universal Accessibility in India - 2021 of MoHUA, serving
different floors in the lift shaft as per detailed specifications enclosed and as
under including all other equipment and accessories complete as required :-
(i) Speed-1.0 MPS
(ii)Floors-5(G+4)
78 21.3 (iii) Travel-17 metres(approx)
(iv) Stops & opening : 5 stops and 5 openings
(v) Controller: A.C. variable voltage & variable frequency
(vi) Automatic rescue device (ARD) complete with dry maintenance free
batteries as required.
(vii) Operation: Microprocessor based single automatic push button/simplex
selective collective/ duplex collective selective with/without attendant
(viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system
(ix) Car Enclosure: Stainless steel scratch proof
Signature of Contractor 78 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
(Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel
decorative ceiling with fans (indirect throw) and LED fitting.
(x) The car flooring should be smooth and antiskid as approved by engineer-
(xi) Type of doors:- (a) Car: Power operated, centre opening horizontal
sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline
Finish). (b) Landing doors: stainless steel scratch proof .
(xii) A hand rail not less that 600mm long at 900mm above floor level to be
fixed adjacent to control panel in the lift car.
(xiii) Voice announcement system in the car to announce the position of the
elevator in the hoist way as the car passes or stops at floor served by the
(xiv) Closed loop Control System, protection against power fluctuation, self
diagnostic control, Landing doors 2 hours Fire rated, Overload detection and
protection, Overspeed Governer, Dot Matrix LED D &
P Indicators In Car &Landings, BMS Compatibility, tamper proof infrared
curtain covering almost the entire height of the lift car door, Alarm horn, Anti
Nuisance Operation, CCTV camera system with 4
MP IP camera, suitable NVR and HDD for 30 days
storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch
with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The
lift doors shall have a vision panel to enable persons with hearing impairment
to signal for help or assistance in the event of an emergency. (xvi)An
appropriate technological support be provided (Through emergency
messaging |services or alarms etc.) to respond to the emergency requirements
of person with hearing impairment or deafness. (xvii) In case of failure of
ARD or other electronic devices, a provision of manual rescue be provided.
Total Carried over to summary - 49,29,663.48 -
Signature of Contractor 79 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SH-22 External Electrical Work
A Subhead-I HT Work
79 11 KV DOUBLE POLE STRUCTURE
Supply, erection, testing and commissioning of 2 pole structure for providing
NDSR 1 No. 11KV,200A GOS in accordance with IE rules, & local authority
specification and drawings and comprising of the following.
a. 2 Nos. 11 mtr. long MS STEEL poles complete with, pole excavation, MS
STEEL foundation, and back filling complete MS steel channel/angle iron
b. 1 Set of cross arms, branching, clamps and painting complete with GI nut,
bolts & washers as required (for GO & DO), LA connection.
c .1 set 11KV Insulator complete with spindles & hardware complete as
d .1 No. 11KV 400A TP Gang operated Air break switches complete with
25mm dia GI pipe operating machanism, handle & locking arrangement.
e. 1 set of 3 nos.11KV single pole drop out fuse complete with barrel fuses,
and mounting arrangement.
f. 1 set (3 nos.) 11KV lightning arrestor and connecting to all phases.
g. 4 No. 150 mm dia 6 meter long GI pipe class 'B' (for XLPE cable
protection) as required.
h. 2 Set 50mm dia 3m long GI pipe earting with 25 x 6 mm GI earth strip
complete as required (for GO & DO & LA)
i 1 nos. 11KV HT danger boards and 2 set of anticlimbing devices.
11 KV Double Pole Structure described below
Supply of 3 core standered aluminium conductor XLPE (Cross linked
polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured
80 NDSR cables confirming to I.S. 7098 (Part-II with latest amendments) 33 KV grade
as per requirement.
Signature of Contractor 80 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
81 22.1 of 11 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc as required.
Laying of one number additional PVC insulated and PVC sheathed / XLPE
power cable of 11 KV grade of following size direct in ground in the same
trench in one tier horizontal formation including excavation, sand
cushioning, protective covering and refilling the trench etc as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
83 22.3 of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe
Supplying and making indoor cable end termination with heat shrinkable
jointing kit complete with all accessories including lugs suitable for following
84 23.3 size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required
Supplying and making outdoor cable end termination with heat shrinkable
jointing kit complete with all accessories including lugs suitable for following
85 23.5 size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber
86 NDSR matting of tested quality.
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly
87 NDSR framed with glass and supported from back with hard board or soft board
with supply of all material labour T&P for proper completion of work.
Signature of Contractor 81 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
CO2 type Fire exitinguisher ISI marked confirming to IS:15683 lates.
Capacity 4.5 kg complete with delivery hose horn, squeeze grip release valve,
locking arrangement, operating temperature -30°c to +55°c, supplied with
88 NDSR body bearing IS 7285 mark and approved valve as per IS 3224. Co2 Gas as
per IS:15222. externally painted with PO Red Shade No. 538 of IS 5,
operation manual and floor stand or wall mount Bracket including
accessories as required as per site condition.
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11
litres capacity duly painted as per fire brigade design, supported on hanging
bracket chained and locked, initially filled with fine river sand, water as per
directions of Engineer-in-charge. Each 4.00 1500.00 6000.00
Supply and laying of PVC Insulated, FRLS Round Sheathed Multi Core
Industrial Flexible Cable conforming to IS 694:2010 with Flexible Bright
90 NDSR Annealed Copper Conductor for Voltage Grade 1100 Volts as per direction
of engineer incharge.
Supply, erection, testing and commissioning of 1 panel, 630A ,11 kV, 3
Phase, 50 Hz., metal clad, dead front, 350 MVA rupturing capacity Vacuum
Circuit Breaker Incoming & Outgoings as per the detailed specifications and
drawings Outgoings as per the detailed specifications and drawings including
91 NDSR connections etc. complete with following in-comers including connections
etc. complete with following in-comers and out-goings including door
interlocking panel should be expendable type complete as per technical
specifications and as required.
A. INCOMER 1nos.:
i) 1 No. VCB having following
1 No. 630A, 11kV, 3 Phase, 50Hz., metal clad, dead front, 350 MVA
rupturing capacity, Fully Drawout type, Vacuum Circuit Breaker (VCB)
1 set of 11kV/110V Potential Transformers with MCB
1 Set of Phase indicating lamps with MCB
1 No. 0-11 kV Digital voltmeter with selector switch
1 set of indicating lamps to indicate OPEN, CLOSE, TRIP,SPRING
CHARGED, TRIP CIRCUIT HEALTHY
Push button for ON, OFF,TRIP&TRIP circuit healthy
1 set of 30/5-5A Current Transformer for metering and protection
Signature of Contractor 82 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
1 No. 0-100 digital Amps ammeter with selector switch
1 Set of CDG 31 (2 No. O/C, 1 No. E/F) relay
Digital frequency meter,Digital Tri vector meter.
I Set of undervoltage relay and Overvoltage relay
Trip circuit supervision relay,Auxiliary relays with shunt trip coil
I No. Master Trip relay
1 No. Digital Power factor meter
Total For Subhead-I HT Work 213816.00 970160.38
Signature of Contractor 83 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
B Subhead-II Transformer
Supplying, installation, testing and commissioning of following capacity
(continuous loading) BEE 5 Star rated (Corresponding Level as per BIS
amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase,
50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound
transformer (Electrolytic grade 99.9% pure copper, Core made of first grade
Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for
out door/indoor applications with Offload Tap Changer/ On Load Tap
Changer (OLTC) ( below 500 KVA offload and above 500 KVA On Load
Tap Changer) on HV side having AVR relay and Remote Tap Changer
Control (RTCC) for automatic sensing of incoming voltage, automatic
operation of OLTC and facility for remote and manual operation of OLTC
HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes
on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV grade, including
92 bus trunking arrangement on LV side including supplying and laying of
copper conductor multicore control cable from transformer to HT
breaker/panel for safety tripping, complete with all accessories and safety
provisions as per relevant IS Code including first filling of filtered
dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all
accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part
5), IS : 1180 and as per CPWD specifications complete in all respects etc as
required at site. The maximum flux density in any part of the core and yoke
at rated voltage and frequency shall be such that the flux density with + 12.5
percent combined voltage and frequency variation from rated voltage and
frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall
not exceed 35 0C for oil and 40 dg. C up to 200 KVA and 40 0C for oil and
45 0C for above 200 KVA for winding. Inside of tank shall be painted with
varnish or liquid resistant paint.
Signature of Contractor 84 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
For external surfaces one coat of thermo setting powder paint or one coat of
epoxy primer followed by two coats of polyurethane base paint shall be used.
IS: 1180 (Part 3) shall be referred to for paint thickness for normal to medium
corrosive atmosphere. For highly polluted atmosphere and special application
external paint work shall be as per direction of Engineer-in-Charge. Design
ambient condition : a) air temperature 50 0C, b) Relative Humidity 90 %
Max, c) Seismic Zone as per location of site, d) Altitude asper location/site.
Noise level Shall not exceed limits asper NEMA TR-1 with all accessories
running measured as per IEC 551 / NEMA standard. The transformer should
have QR code which should contain drawing, test report OEM manual,Geo-
Tag of manufacturing location etc. Marking Each transformer shall be
provided with rating plate made of anodized aluminium/ stainless steel
material securely fixed on the outer body, easily accessible, as per IS: 1180
Part-3. The entries on the rating plate shall be indelibly marked. Fitting and
Accessories : The following fittings shall be provided:- a) Two earthing
terminals with the earthing symbol b) Oil level gauge indicating oil level at
minimum, 30°C and maximum operating temperature; c) Air release device
(for non-sealed type transformers) d) Rating and terminal marking plates; e)
Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size thread, IS
554) preferably steel with plug for three phase transformers; g) Thermometer
pocket with cap; h) Oil filling holes having (1¼″ nominal size thread) with
cover (for sealed type transformers without conservator); i) Lifting lugs for
the complete transformer as well as for core and winding assembly; j)
Pressure relief device or explosion vent above 200 kVA; k) One filter valve
on the upper side of the tank (for transformers above 200 kVA); l)
Unidirectional flat rollers (for transformers above 200 kVA); m) Inspection
Signature of Contractor 85 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
hole (for transformers above 200 kVA); n) HV side neutral grounding strip
(where one of the HV bushing terminal is connected to earth); o) Buchholz
relay for transformers above 800 kVA. p) Arcing horns or suitable rating
lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oiltemperature
indicator and winding temperature indicators for transformers above 200
kVA with suitable tripping mechanism above permissible limit s) Jacking
pads (for transformer above 1 600 kVA); t) Additional Neutral separately
brought out on bushing for earthing. u) Magnetic oil level gauge (for
transformer above 1600 kVA) with low oil level alarm contact; v) Non return
valve (for conducting pressure test); w) Pressure relief device or explosion
vent x). Monogram Plate y) Inspection cover z). Detachable type radiators
with top and bottom shutoff valve. aa) Oil Conservator with Oil level
indicator, minimum level marking and drain plug for all transformers of
capacity 50 KVA and above. bb) Necessary hardware, clamps, lugs etc. for
termination on HV/MV etc. for all transformers
Total For Subhead-II Transformer 0.00 622287.00 0.00
C Subhead-III Distribution Panel
93 MAIN L.T PANEL
SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz
power distribution system. The panel shall be Indoor, free standing, floor
mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type
compartmentalised design fabricated out of 14 SWG CRCA sheet steel,
complete with colour coded, heat shrinkable PVC insulated, aluminium bus
bars and separate earth bus bar of adequate cross section through out the
length of the panel. The incoming and outgoing feeders shall be
NDSR accommodated in a fully segregated, modular multitier arrangement with
adequate size and distinct cable alley, bus bar alley/chamber. The panel shall
be complete with name plate, earthing, numbering, danger plate etc. as per
specifications and drawings as required. The panel shall withstand the fault
level of 50kA as per Single Line Diagram. The Panel shall also be capable to
communicate status like ON/OFF/ Trip through Modbus/Ethernet for major
component like ACB, MCCB, MCB & Multifunation meters.
Signature of Contractor 86 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
The Main LT Panel shall use all draw out type breakers suitable for 415 V
AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Panel shall have
Buscoupler switching, auto operation of incommer and bus coupler, auto start
of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and
having following incomming and outgoing Air Circuit
Breakers,microprocessor release for overload, short circuit, instantaneous &
earthfault protection with Current & Voltage metering & LCD display.
Air Circuit Breaker with microprocessor release ge metering & LCD display ,
with ready to clsoe indicator, should have capability to communicate ON
/OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of
ACB (Icu=Ics=Icw=65 KA (1 sec). MCCB, with microprocessor release
with LSIG protection functionand should not derate upto 50 decree
Centrigrate as per testing guideline as per IEC 60947-2 and all the ACB upto
2500Amp ACB should have same frame size LCD display for fault trip
history, haivng current limiting feature, double break mechanism &
capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (65
1 Nos. 400 Amp FP MCCB 25KA
R,Y,B Phase indication Lamp with control MCB
On, Off, Trip Status Indication with control MCB
Inbuilt Zone Slelective Interlocking function
Multifunction Meter
1 Nos. 160 Amp FP MCCB 25KA
R,Y,B Phase indication Lamp with control MCB
On, Off, Trip Status Indication with control MCB
Inbuilt Zone Slelective Interlocking function
Multifunction Meter (For DG Set)
1 Nos. 100 Amp FP MCCB 25KA
R,Y,B Phase indication Lamp with control MCB
On, Off, Trip Status Indication with control MCB
Inbuilt Zone Slelective Interlocking function
Multifunction Meter (For On-Grid Solar System)
1 Nos. 160 Amp FP ATS
1 Nos. 500 Amp FP busbars of aluminium alloy as per SLD.
1 Nos. 200 Amp FP busbars of aluminium alloy as per SLD.
Signature of Contractor 87 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
7 Nos. 63 Amp FP MCCB 25 KA
On, Off, Trip Status Indication with control MCB
Multifunction Meter
External Light Feeder Pillar+UPS+FF+LIFT + Spare
20 Nos. 63 Amp FP MCB 10 KA
PDB+ACDB + Spare
12 Nos. 32 Amp FP MCB 10 KA
5 Nos. 32 Amp DP MCB 10 KA
RELAYS AS PER SLD
94 UPS OUTPUT PANEL
SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz
power distribution system. The panel shall be Indoor, free standing, floor
mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type
compartmentalised design fabricated out of 14 SWG CRCA sheet steel,
complete with colour coded, heat shrinkable PVC insulated, aluminium bus
bars and separate earth bus bar of adequate cross section through out the
length of the panel. The incoming and outgoing feeders shall be
NDSR accommodated in a fully segregated, modular multitier arrangement with
adequate size and distinct cable alley, bus bar alley/chamber. The panel shall
be complete with name plate, earthing, numbering, danger plate etc. as per
specifications and drawings as required. The panel shall withstand the fault
level of 50kA as per Single Line Diagram. The Panel shall also be capable to
communicate status like ON/OFF/ Trip through Modbus/Ethernet for major
component like ACB, MCCB, MCB & Multifunation meters. Set 1.00 85600.00 85600.00
The Main LT Panel shall use all draw out type breakers suitable for 415 V
AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Panel shall have
Buscoupler switching, auto operation of incommer and bus coupler, auto start
of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and
having following incomming and outgoing Air Circuit
Breakers,microprocessor release for overload, short circuit, instantaneous &
earthfault protection with Current & Voltage metering & LCD display.
Signature of Contractor 88 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Air Circuit Breaker with microprocessor release ge metering & LCD display ,
with ready to clsoe indicator, should have capability to communicate ON
/OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of
ACB (Icu=Ics=Icw=65 KA (1 sec). MCCB, with microprocessor release
with LSIG protection functionand should not derate upto 50 decree
Centrigrate as per testing guideline as per IEC 60947-2 and all the ACB upto
2500Amp ACB should have same frame size LCD display for fault trip
history, haivng current limiting feature, double break mechanism &
capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (65
1 Nos. 63 Amp FP EDO MCCB 16KA
R,Y,B Phase indication Lamp with control MCB
On, Off, Trip Status Indication with control MCB
Inbuilt Zone Slelective Interlocking function
Multifunction Meter
1 Nos. 100 Amp FP busbars of aluminium alloy as per SLD.
12 Nos. 32 Amp FP MCB 10 KA
RELAYS AS PER SLD
Total For Subhead-III Distribution Panel 0.00 472000.00
Signature of Contractor 89 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
D Subhead-IV LT CABLE
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
of 1.1 KV grade of following size direct in ground including excavation,
95 10.1 sand cushioning, protective covering and refilling the trench etc as required.
10.1.3 Above 95 sq.mm. and upto 185 sq.mm. Meter 220.00 497.00 109340.00
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
96 10.5 of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL
pipe as required
10.5.3 Above 95 sq.mm. and upto 185 sq.mm. Meter 30.00 97.00 2910.00
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
97 10.7 power cable of 1.1 KV grade of following size on wall surface as required
10.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle Meter 160.00 64.00 10240.00
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
98 10.8 power cable of 1.1 KV grade of following size on cable tray as required.
10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Meter 100.00 53.00 5300.00
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat
Supply of following siz of 1.1KV grade multicore aluminium conductor
NDSR XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with
up to date amendment
Signature of Contractor 90 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying and making cable end terminations with brass compression gland
and aluminium lugs for following size of PVC insulated PVC
100 11.1 sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as
Providing, laying and fixing following dia RCC pipe NP2 class (light duty)
in ground complete with RCC collars, jointing with cement mortar 1:2 (1
101 15.14 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as
Supplying and making cable route marker with cement concrete 1:2:4
(1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of
size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a
thickness of 10cm including inscription duly engraved as required. Each 10.00 683.00 6830.00
Supplying and laying of following size DWC HDPE pipe ISI marked along
with all accessories like socket, bend, couplers etc. conforming to IS 14930,
15.15 Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm
below ground level) including excavation and refilling the trench but
excluding sand cushioning and protective covering etc., complete as required.
15.15.5 200 mm dia (OD-200 mm & ID-175 mm nominal) Meter 30.00 580.00 17400.00
Total For Subhead-IV LT CABLE 373336.00 571540.00
Signature of Contractor 91 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
E Subhead-V External Lighting Work
EXTERNAL LIGHT FEEDER PILLAR
Supply installing testing & commissioning of out door type IP66 with
additional canopy street light feeder pillar (Distribution Panel)
104 NDSR compartmentalised design, dust tight & vermin proof made out of 14 gauge
M.S. sheet, stove powder coated complete as required with following
incomming & outgoing as per detail below. Each 1.00 65800.00 65800.00
63 Amp. 10 KA FP MCCB 1 No.
Suitable digital contractor and timer for down & dusk
100 Amp. TPN Alu. Bus bar
32 Amp. 10KA FP MCB - 2 No.
32 Amp. 10KA DP MCB - 4 No.
Supply and fixing of 16 mtr. High Mast shaft approved make with rising
system hot dip glavanized inside & out side dip, having pole sheet thickness
4mm, Top dia minimum 150 mm bottom dia minimum 540 mm base plate
32mm thick, suitable for wind velocity as per IS 875 part 3 & having no
circuimferential weld, with accessories for high mast such as head frame
105 NDSR suitable for 8 to 12 luminaries & its control gear boxex 1.5HP power tool
motor, 3 point suspension system with steel wire rope 8mm dia, double drum
winch including making suitable foundation as per manufacture drawing/site
reuiment along with foundation bolts, nuts, washers, anchor plates etc.
complete in all respect.
Signature of Contractor 92 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, Installation, Testing & Commissioning of Flood Light, powder
coated pressure die cast aluminium body with built in or separate driver as
per the requirement with Driver efficiency >85%,
Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz,
Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV
L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10%
as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and
over voltage protectionEMI-EMC as per CISPR-15, lenses for beam angle 30
deg-120deg as per the application and the project requirement., suitable tilt
able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000
Burning Hours with 70% of initial Lumen
maintained till life ends as per LM80 extrapolation IES TM-21-11 report,
SDCM(Standard Deviation Colour Matching) <5, Maximum power
consumption should not more than the specified rating and Fixture shall be of
relevant BIS standard complete in all respect i/c external connections with
1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable
and earthing etc. as required with Minimum 5 year OEM warranty. System
lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all
testing required for LED fixtures as per BIS shall be submitted. Shape size
and CCT shall be as approved by Engineer-in-Charge as per requirement.
(Thermal management: heat sink of aluminium housing such that LED
temperature shall not rise above 90°C).
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia
70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness
107 NDSR with single arm bracket (1 Mtr length) on RCC foundation including the cost
of foundation, foundation bolts, excavation & back filling and Required T&P
completee in all respect. Each 8.00 12500.00 100000.00
Signature of Contractor 93 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
LED Street light fixture, powder coated pressure die cast aluminium body
(System lumen efficacy ≥120 <135 lm/Watt)
Supplying, installation, Testing & Commissioning of Street light LED fixture
powder coated pressure die cast aluminium body with driver as
per the requirement with Driver efficiency >85%, Input voltage: 140-270
Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal
surge protection of 5 KV L,N,E as per IEC 61000-4-5,
Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-
66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As
per CISPR 15 , lenses for beam angle as
per IESNA type I/II/III as per the width of the road and the project
requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver &
electrical circuitry) of minimum 50000 Burning Hours with
108 8.13 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES
TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI
Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power
consumption should not more than the specified rating and Fixture shall be of
relevant BIS standard complete
in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC
insulated copper conductor single core cable and earthing etc. as
required with Minimum 5 year OEM warranty.\ System lumen efficacy ≥120
<135 lm/Watt output . LM79 & LM80 Test report and all testing required for
LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as
approved by Engineer-in-Charge as per requirement. (Thermal management:
heat sink of aluminium housing such that LED junction temperature shall
not rise above 90°C).
Signature of Contractor 94 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying, installation, Testing & Commissioning of the integrated type
solar PV lighting system on the existing pole structure, comprising of 35
watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel
(minimum efficiency 21%),, Pulse with modulation (PWM)/Maximum
Power point tracking (MPPT) Charge Controller in the box with a sleek
appearance and a sturdy structure, is weather-proof, and is simple to install,
with Lithium-Iron Phosphate Battery (LiFePO4), charging time 8-10 hours,
Battery backup time 12 hours (minimum), LED fixture watt 35 watt, Input
voltage: 12V DC , Operating temp range -5 0C to 50 0C, internal surge
protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, IP-
66,IK-08, CRI >70 , under voltage and over voltage protection, Electro
Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per
CISPR 15 , lenses for beam angle as per Illuminating Engineering Society
109 8.21.3 of North America (IESNA) type I/II/III as per the width of the road and the
project requirement, Correlated Colour Temperature (CCT) 5700°K (As
per American National Standard Institute (ANSI Bin)), life time (LED,
Driver & electrical circuitry) of 50K hours lamp buring hours till the 70 % of
initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report,
automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene
(ABS body), can be installed on a pole or wall. System lumen efficacy >120
lm/Watt output. LM79 & LM80 Test report and all testing required for LED
fixtures as per BIS shall be submitted.. All as per pre approved by Engineer
in-charge complete in all respect i/c external connections with 1.5 sq.mm
FRLS/HFFR, PVC insulated copper conductor single core cable and earthing
etc. as required, complete with mounting structure for the battery and
accessories suitable for withstand wind storm
speed as per the site location. (Thermal management: heat sink of aluminium
housing such that LED junction temperature shall not rise
8.21.3 35 Watt (System lumen efficacy >120 lm/Watt) Each 2.00 29329.00 58658.00
Total For Subhead- V External Lighting Work 121258.00 412930.15
Signature of Contractor 95 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
F Subhead-VI Earthing Work
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for
earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre
from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in
G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire
and pipe will be extra) upto switch board, 30cm square C.I. box with hinged
cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and
salt at least 150mm thick alround etc. as per directions of Engineer-in-charge
complete in all respects as per drawing. Each 2.00 7658.00 15316.00
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for
earthing with its top at least 3 metres below ground level complete with
20mm dia G.I. pipe and funnel for watering and one earthing lead of two no.
8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron
to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square
5.4 C.I. frame with hinged cover masonry housing alternate layers of
charcoal/coke and salt at least 150mm thick alround etc. as per directions of
Engineer-in-charge complete in all respect.
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for
earthing with its top at least 3 metres below ground level complete with
20mm dia G.I. pipe and funnel for watering and two earthing lead of two no.
8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron
112 to switch board the cost of G.I. pipe and copper wire will be extra) 30cm
5.6 square C.I. frame with hinged cover masonry housing alternate layers of
charcoal/coke and salt at least 150mm thick alround etc. complete in all
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below
ground as strip earth electrode, including connection/ terminating with nut,
113 5.8 bolt, spring, washer etc. as required. (Jointing shall be done by overlapping
and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
Signature of Contractor 96 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground
as strip earth electrode, including connection/ terminating with G.I. nut, bolt,
114 5.9 spring, washer etc. as required. (Jointing shall be done by overlapping and
with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe
115 5.10 from earth electrode including connection with brass nut, bolt, spring,
washer excavation and re-filling etc. as required. Meter 20.00 1638.00 32760.00
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from
116 5.11 earth electrode including connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required. Meter 100.00 755.00 75500.00
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
117 5.15 recess for connections etc. as required.
Supply and fixing of 1 no. 8SWG GI wire in 15mm dia GI pipe for earthing,
laid in ground or in wall duly concealed including the cost of cement, sand,
118 5.18 labour, T&P other material required for proper completion of the work as
directed at site.
Total For Subhead-VI Earthing Work 459396.00 0.00
G Subhead-VII Panel Protection System
2kg capacity seamless Alluminium cylinder Paso approved stored pressure
type clean agent fire extinguisher alongwith all necessary fitting filled with
119 NDSR clean agent FK-5-1-12 complete having operating pressure between 15 bar
etc. as required UL & FM listed gas.
5kg capacity seamless Alluminium cylinder Paso approved stored pressure
type clean agent fire extinguisher alongwith all necessary fitting filled with
120 NDSR clean agent FK-5-1-12 complete having operating pressure between 15 bar
etc. as required UL & FM listed gas. Each 1.0 76180.00 76180.00
Signature of Contractor 97 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
SITC of Pneumatic Heat detection tube red color made by special modified
polyamide (PA), UL and LPCB standard, having burst temperature 100°C to
121 NDSR 120°C, inner diameter 4 mm, outer diameter 6 mm, pressurized with nitrogen
at 15 bar pressure for automatic detection and suppression system
SITC of End of line adapter along with pressure gauge working pressure 25
122 NDSR bar. UL approved.
SITC of End of Line Plug for automatic fire suppression System used for
123 NDSR fitting at tube end to terminate the point. Fitting made by brass nickel plated
material. UL approved.
124 NDSR SITC of Pressure Switch at 15 bars. UL approved. Each 3 9880.00 29640.00
SITC of T connection suitable for 4 / 6 mm. diameter pressurized tubes, brass
125 NDSR nickel plated material with maximum working pressure 25 bar. UL
approved. Each 6 4095.00 24570.00
SITC of Master Control Unit micro processor based 4 zone inbuilt GSM
dialer audio visual alarm control panel, 2NO/NC potential free relay contacts
126 NDSR discharge LED indicator, battery LED indicator, system status indicator and
AC power ON LED indicator with inbuilt battery backup 24h .
Total For Subhead-VII Clean Agent Suppression System 0.00 499700.00
Signature of Contractor 98 Signature
Digitally signed of NBCC
DESCRIPTION OF ITEM Rate (INR) Amount (INR)
S.No. UNIT QUANTITY
No. DSR-2023 DSR-2025 NDSR DSR-2023 DSR-2025 NDSR
H Subhead- VIII On Grid Solar Power Backup System
On Grid Solar System Work
Supply, Installation, Testing and Commissioning of ongrid Solar
Photovoltaic Power Plant conformington MNRE specifications as amended,
consisting of Mono Crystalline silicon solar cells, netmetering facility,
necessary protections, earthing, mounted on Aluminium/GI structure of
suitable strength with following components complete as required:-a)Solar
127 17.1 Photovoltaic Module of capacity 330Wp or above, manufactured in India,
conforming to IS14286/IEC61215, IS/IEC61730-Part-1, IS/IEC61730-Part-
2. Solar Photovoltaic Module conversion efficiency shall not be less than
16.5%. PV modules used in solar power plants/systems must be warranted
for their output peak watt capacity, which should not be less than 90% at the
end of 10years and 80% at the end of 25 years KWp 20.00 54280.00 1085600.00
b)Power Conditioning Unit (PCU) of 350-800VDC Input voltage range and
400VAC, three phase, 4wire, 50Hz+/-2.5Hz, out put voltage suitable to
generate AC Power with efficiency not less than 97%, total harmonic
distortion less than 3% and suitable for ambient temperature from
0to50degree C. The PCU shall adjust the voltage and frequency level to suit
the Grid Voltage Frequency.c) Data Monitoring System complete with
d) Fixing of Array junction box & Main junction box with IP65 protection
and termination arrangement for in coming and outgoing cable alongwith
glands, lugs and other accessories etc. as required.
e) Lightning and surge voltage protection.f)Connections & Interconnections
by supplying & fixing required size XLPE insulated copper conductor 1.1kV
grade armoured power and control cables between solar modules, main
power cable to grid supply PCU unit alongwith supplying & fixing of
necessary channel/conduit lugs and other accessories etc.asrequired.
Subhead-VIII On Grid Solar Power Backup System 1085600.00 0.00
Total Carried over to summary 2875693.00 2926330.53
Signature of Contractor 99 Signature
Digitally signed of NBCC
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT Powergrid.pdf
Tender Document
GCC Contracting for Construction works 2026.pdf
Tender Document
SCC Powergrid.pdf
Tender Document
TENDER BOQ.pdf
Tender Document
Tender Drawings.pdf
Tender Document
Integrity Pact.pdf
Tender Document
Technical Specifications.pdf
Tender Document
Physical Milestones.pdf
Tender Document
Approved Makes List.pdf
Tender Document
Soil Investigation Report.pdf
Tender Document
Download all tender documents and submit your bid