The Works of undergrounding various HT lines under EDC(Urban),Dehradun.

Amount

Material

33 KV CABLE END TERMINATION J/KIT FOR 3Cx400 SQMM CABLE (O/D) (RAYCHEM MAKE)

33 KV STRIGHT THROUGH JOINT KIT FOR 3Cx400 SQMM CABLE (RAYCHEM MAKE)

33 KV ISOLATOR VERTICAL TYPE

PP&CLAMP FOR STP POLE WITH N&B

PG CLAMP SUITABLE FOR CABLE CONNECTION AND JUMPERING

STAY CLAMP FOR SP-55 WITH N&B

AL LUGS SUITABLE FOR PANTHER

AL LUGS OF SIZE UPTO 400 SQMM

CABLE HOLDING CLAMP WITH N&B for SP -55

MS BOLTS & NUT WITH WASHER

EARTHING STRIP 50 X 6 SQMM

CONNECTOR SUITABLE FOR PANTHER FOR FOLLOWING EQUIPMENTS

33KV ISOLATOR VERTICAL TYPE

33KV 630A 25KA/1SEC SF6 INSULATED RING MAIN UNIT WITH 3 NO VCB

33KV 3X400 SQMM PUSHON TERMIATION KIT INDOOR TYPE FOR 33KV RMU

LABOUR CHARGES

CARRIAGE OF MATERIAL

CARTAGE OF OTHER STOCK MATERIAL (OTHER THEN POLES) BY VEHICLE FROM STORE CENTER TO NEAREST CONSTRUCTION SITE STORE INCLUDING LOADING AND UNLOADING AT BOTH ENDS. (0-20KM)

CARTAGE OF ST-55 POLE POLE FROM STORE CENTRE TO CONSTRUCTION SITE WITH LOADING,UNLOADING AT BOTH POINTS AND PROPER STACKING (0-20 KM)

TRANSPORTATION OF 33 KV RMU

MANNUAL CARTAGE OF MATERIAL UNLOADING POINT TO WORK SITE ( 0 TO 0.5 KM) (A) STOCK MATERIAL

MANNUAL CARTAGE OF MATERIAL UNLOADING POINT TO WORK SITE ( 0 TO 0.5 KM) (B) STP SP-55 POLE

FABRICATION OF MS CHANNEL / ANGLE IRON AFTER CUTTING IN REQUIRED SIZES WITH DRILLING OF HOLES UPTO GOOD FINISH

EXCAVATION OF EARTH FOR POLE PIT OF SIZE 0.9X0.6X1/6 OF FULL LENGTH OF POLE FOR ERECTION OF POLE IN ALL TYPE OF SOIL INCLUDING PROPER DRESSING OF SIDES AND RAMMING OF BOTTOM INCLUDING GETTING OUT THE EXCAVATED SOIL AND DISPOSAL OF SURPLUS EXCAVATED SOIL AS DIRECTED COMPLETE WORK

ERECTION OF FOLLOWING FOUR SUPPORT POLE IN PROPER LEVEL AND ALIGNMENT ALONG WITH FIXING OF ALL ACCESSORIES,LIKE TOP CHANNEL & CLAMP AS PER RESPO CONSTRUCTION MANUAL. (A) STP POLE SP-55

ERECTION OF FOLLOWING DOUBLE SUPPORT POLE IN PROPER LEVEL AND ALIGNMENT ALONG WITH FIXING OF ALL ACCESSORIES,LIKE TOP CHANNEL & CLAMP AS PER RESPO CONSTRUCTION MANUAL. (A) STP POLE SP-55

ERECTION OF FOLLOWING SINGLE SUPPORT POLE IN PROPER LEVEL AND ALIGNMENT ALONG WITH FIXING OF ALL ACCESSORIES,LIKE TOP CHANNEL & CLAMP AS PER RESPO CONSTRUCTION MANUAL. (A) STP POLE SP-55

GROUTING OF POLE IN SIZE 0.45X0.45X1/9 OF THE SUPPORT IN CC RATIO 1:4:8(1 CEMENT:4 GRADED STONE 20MM NOMINAL SIZE : 8 COARSE SAND) BLOCK INCLUDING COSTOF CEMENT,SAND ALIGNMENT,LEVELING AS PER RESPOCONSTRUCTION MANUAL.

MUFFING OF POLES SIZE 0.45 CMX0.60 CM RADIOUS WITH CC 1:3:6 (1 CEMENT : 3 COARSE SAND : 6 GRADED STONE 10 MM NOMINAL SIZE) BLOCK SIZE 45 CM HEIGHT FROM GROUND LEVEL INCLUDING COST OF CEMENT, STONE AND SAND ETC.

PAINTING OF NEW/EXISTING POLES WITH CHANNEL INCLUDING ONE COAT PRIMER AND TWO COAT SILVER PAINT AND RED ASIAN PAINT OF SUPERIOR QUALITY ON UPPER SIDE OF POLE

FIXING AND GROUTING OF STAY SET INCLUDING DIGGING OF PIT IN SIZE OF CC 1:4:8 (0.3X0.6X0.6) MTR INCLUDING NOZZELING, FIXING, TENSIONING AND TIGHTENING COMPLETE.

FIXING OF MS EARTH ROD INCLUDING EXCAVATION, INSERTING OF EARTH ROD IN SOIL AND CONNECTION OF EARTH WIRE

LAYING OF HDPE PIPE WITH TRENCHLESS TECHNOLOGY FOR 33KV UNDERGROUND CABLE WITH LAYING OF CABLE IN HDPE PIPE INCLUDING COST OF HDPE PIPE 160 MM OUTER DIA MATERIAL GRADE PE80/PN6

MAKING OPEN TRENCH IN MIXED SOIL FOR 33KV CABLE AT 1.5 MTR DEPTH BELOW GROUND LEVEL INCLUDING LAYING OF GI / HDPE PIPE (AS PER REQUIRMENT).

SUPPLY AND LAYING OF HDPE PIPE 160 MM OUTER DIA 6 MM THICKNESS

SUPPLY AND FIXING OF GI PIPE (WITH SOCKET) 6 INCH DIA AT POINTS OF ROAD CROSSING, BRIDGE CROSSING, CABLE RISING AT POLE ETC AS PER SITE REQUIREMENT

LAYING OF CABLE FOR LOOP & RISER ETC

SUPPLY AND FIXING OF SPECIAL EARTHING FOR CABLE AT DIFFERENT POLE STRUCTURE BY 450X450X10MM G.I. PLATE VERTICALLY 3M BELOW THE GROUND LEVEL WITH ALTERNATE LAYERS OF CHARCOAL & SALT ATLEAST 200MM THICK AROUND CONNECTED WITH G.I STRIP RUNNING TILL TOP OF POLE COMPLETE.

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW FOUR POLE

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW DOUBLE POLE

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW SINGLE POLE

FILLING & FIXING OF 33KV END TERMINATION CABLE J.KIT (O/D)

FILLING & FIXING OF 33KV END TERMINATION CABLE J.KIT (ST TH)

SUPPLY AND FIXING OF RCC ROUTE MARKER

SUPPLY AND FIXING OF DANGER/NUMBER/NAME PLATE

LAYING/SAGGING/JUMPERING/STRINGING OF ACSR PANTHER CONDUCTOR

MAKING JOINT PIT OF SIZE 5X2X2 MTR FOR FILLING AND FIXING OF 33KV STRAIGHT THROUGH JOINT KIT

MAKING OF BUS BAR ARRANGEMENT WITH 1CX400 SQMM CABLE FOR 33 KV CABLE END TERMINATION CONNECTION AND JUMPERING

MAKING SECTION POLE FOR EXISTING 33 KV LINE COMPLETE WITH ALL RESPECT

MAKING FOUNDATION OF RMU AND GROUTING FOR FENCING AND GRAVELLING

HIPOT TESTING AND COMMISSIONING OF CABLE AND PANEL TESTING BEFOR CHARGING

ERECTION OF 33KV LA ON DP BEFORE AT STARTING AND ENDING JUNCTION POINTS OF CABLE INCLUDING PROPER EARTHING

ERECTION, PROVIDING AND FIXING OF WIRE MESH OF SIZE 50X35 MM

FIXING AND COMMISIONING OF 33KV SF6 RING MAIN UNIT WITH 1 NOS SPECIAL EARTHING

FIXING AND COMMISSIONING OF 33KV 3X400 PUSHON TERMINATION KIT INDOOR TYPE FOR 33KV RMU

Description of Work / Item(s)

Amount

Material

33 KV CABLE END TERMINATION J/KIT FOR 3Cx400 SQMM CABLE (O/D)

33 KV STRAIGHT THROUGH JOINT KIT FOR 3Cx400 SQMM CABLE

AL LUGS SIZE 400SQMM

PP&CLAMP FOR SP-33 WITH N&B

STAY CLAMP FOR SP-33 WITH N&B

PG CLAMP SUITABLE FOR CABLE CONNECTION AND JUMPERING

CABLE HOLDING CLAMP WITH N&B

33KV ISOLATOR VERTICAL TYPE

AL LUGS SUITABLE FOR PANTHER

CONNECTOR SUITABLE FOR PANTHER FOR FOLLOWING EQUIPMENTS

33KV ISOLATOR VERTICAL TYPE

Labour Charges

CARRIAGE OF MATERIAL

STOCK MATERIAL

STP SP-33 POLE

MANNUAL CARTAGE OF MATERIAL UNLOADING POINT TO WORK SITE ( 0 TO 0.5 KM)l

STOCK MATERIAL

STP SP-33 POLE

FABRICATION OF MS CHANNEL / ANGLE IRON AFTER CUTTING IN REQUIRED SIZES WITH DRILLING OF HOLES UPTO GOOD FINISH

ERECTION OF STP SINGLE POLE SUPPORT INCLUDING EXCAVATION OF FOUNDATION OF PIT OF SIZE 0.9X0.6X1/5TH OF LENGTH OF POLE IN MIXED SOIL FOR LT/HT SUPPORTS WITH BACKFILLING OF EARTH & GROUTING OF POLE SUPPORTS WITH CEMENT CONCRETE IN SIZE 0.45x.0.45x1/5 MTR LENGTH OF SUPPORTS WITH CC RATIO 1:4:8 WITH CEMENT, CORSE SAND AND STONE BALLAST. MUFFING/PLINTHING OF POLE 300 MM ABOVE GROUND LEVEL OF SIZE 0.45X0.45 MM IN CC RATIO 1:3:6 AS PER UPCL CONSTRUCTION MANUAL

ERECTION OF STP DOUBLE POLE SUPPORT INCLUDING EXCAVATION OF FOUNDATION OF PIT OF SIZE 0.9X0.6X1/5TH OF LENGTH OF POLE IN MIXED SOIL FOR LT/HT SUPPORTS WITH BACKFILLING OF EARTH & GROUTING OF POLE SUPPORTS WITH CEMENT CONCRETE IN SIZE 0.45x.0.45x1/5 MTR LENGTH OF SUPPORTS WITH CC RATIO 1:4:8 WITH CEMENT, CORSE SAND AND STONE BALLAST. MUFFING/PLINTHING OF POLE 300 MM ABOVE GROUND LEVEL OF SIZE 0.45X0.45 MM IN CC RATIO 1:3:6 AS PER UPCL CONSTRUCTION MANUAL

FIXING OF MS EARTH ROD INCLUDING EXCAVATION, INSERTING OF EARTH ROD IN SOIL AND CONNECTION OF EARTH WIRE

FIXING AND GROUTING OF STAY SET INCLUDING DIGGING OF PIT IN SIZE OF CC 1:4:8 (0.3X0.6X0.6) MTR INCLUDING NOZZELING, FIXING, TENSIONING AND TIGHTENING COMPLETE.

PAINTING OF NEW/EXISTING POLES WITH CHANNEL INCLUDING ONE COAT PRIMER AND TWO COAT SILVER PAINT AND RED ASIAN PAINT OF SUPERIOR QUALITY ON UPPER SIDE OF POLE

LAYING OF 33 KV UNDERGROUND CABLE WITH TRENCHLESS TECHNOLOGY FOR 33KV WITH LAYING OF CABLE IN HDPE PIPE INCLUDING COST OF HDPE PIPE(160 MM DIA PN4 PE80, 6.1 to 7.3 MM THICKNESS) AT 2 MTR DEPTH

LAYING OF CABLE AT OPEN TRENCH IN GI PIPE / HDPE PIPE

LAYING OF 33 KV CABLE IN LOOP AND RISER

SUPPLY AND LAYING OF HDPE PIPE 160 MM OUTER DIA 6 MM THICKNESS

SUPPLY AND FIXING OF GI PIPE (WITH SOCKET) 6 INCH DIA AT POINTS OF ROAD CROSSING, CABLE RISING AT POLE ETC ( B CLASS JINDAL MAKE)

SUPPLY AND FIXING OF SPECIAL EARTHING FOR CABLE AT DIFFERENT POLE STRUCTURE BY 450X450X10MM G.I. PLATE VERTICALLY 3M BELOW THE GROUND LEVEL WITH ALTERNATE LAYERS OF CHARCOAL & SALT ATLEAST 200MM THICK AROUND CONNECTED WITH G.I STRIP RUNNING TILL TOP OF POLE COMPLETE.

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW SINGLE POLE

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW DOUBLE POLE

MAKING OF BUS BAR ARRANGEMENT WITH 1CX400 SQMM CABLE FOR 33 KV CABLE END TERMINATION CONNECTION AND JUMPERING

FILLING & FIXING OF 33KV END TERMINATION CABLE J.KIT (O/D)

FILLING & FIXING OF 33KV STRAIGHT THROUGH J.KIT

FIXING OF ACCESSORIES

MAKING JOINT PIT OF SIZE 5X2X2 MTR FOR FILLING AND FIXING OF 33KV STRAIGHT THROUGH JOINT KIT

SUPPLY AND FIXING OF RCC ROUTE MARKER

SUPPLY AND FIXING OF DANGER/NUMBER/NAME PLATE

LAYING/SAGGING/JUMPERING/STRINGING OF ACSR PANTHER CONDUCTOR

ERECTION AND FABRICATION OF 33KV ISOLATOR VERTICAL TYPE IN PROPER ALIGNMENT FOR SMOOTH OPERATION

PROVIDING LA EARTHING

HIPOT TESTING AND COMMISSIONING OF CABLE AND PANEL TESTING BEFOR CHARGING

MOUNTING & FIXING OF LIGHTNING ARRESTOR SET(3 NOS) ON DOUBLE POLE STRUCTURE INCLUDING MAKING ALL CONNECTION BY G.I STRIP SIZE 35X6 MM TO EARTH POINT COMPLETE WORK (INCLUDING COST OF G.I STRIP)

P M ELECTRICAL COMPANY

Hi Tech Power Solution

Hi Tech Power Solution

P M ELECTRICAL COMPANY

P M ELECTRICAL COMPANY

Hi Tech Power Solution