JJM - Ezhukone Grama Panchayath-Construction of 5.00L.L. O.H.S.R.Providing Balance FHTCs, at Thoppilpara, Renovation of Pochakkonam Chira, Providing and Fixing Pressure Filter, Pumping Main and Interconnections in Ezhukone for improving watersupply

Amount

CONSTRUCTION OF 5.00 LL O.H.S.R

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.2.1:Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m:All kinds of soil

2.9.1:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

OD139926/2022-2023:Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth level

5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

4.12:Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

22.4.1:Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)

OD50123/2023-2024:Providing and fixing 100 mm Dia Wall cast pipes to the tank in suitable position with leak proof including cost of labour, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD139942/2022-2023:Providing and fixing 150 mm Dia Wall cast pipes to the tank in suitable position with leak proof including cost of labour, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD72542/2023-2024:Providing and fixing 300 mm Dia Wall cast pipes to the tank in suitable position with leak proof including cost of labour, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD72047/2023-2024:Providing and fixing 350 mm Dia Wall cast pipes to the tank in suitable position with leak proof including cost of labour, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers

OD139927/2022-2023: Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level upto floor V level

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

22.23.1:Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

19.18.1:Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg

18.73.1:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :100 mm dia Ductile Iron Double Flanged

18.30.2:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:100 mm diameter pipe

18.73.2:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :150 mm dia Ductile Iron Double Flanged

18.30.4:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:150 mm diameter pipe

18.73.5:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :300 mm dia Ductile Iron Double Flanged

18.30.7:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipe

18.73.6:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :350 mm dia Ductile Iron Double Flanged

18.30.8:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:350 mm diameter pipe

OD50124/2023-2024:Providing and Fixing 100 mm D.I. Flanged Duck foot bend for inlet/ outlet lines including cost of labours, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD140024/2022-2023:Providing and Fixing 150 mm D.I. Flanged Duck foot bend for inlet/ outlet lines including cost of labours, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD140026/2022-2023:Providing and Fixing 300 mm D.I. Flanged Duck foot bend for inlet/ outlet lines including cost of labours, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD72523/2023-2024:Providing and Fixing 350 mm D.I. Flanged Duck foot bend for inlet/ outlet lines including cost of labours, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

100.98.460:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm.

100.98.463:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm.

100.98.464:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 350mm.

100.31.1.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class I.

100.31.1.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class I.

100.31.1.8:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 350mm diameter, Class I.

OD140080/2022-2023:Providing and Fixing 65 mm Dia G.I. Tee as Air vent on top of roof slabs including cost of materials, labours, consumables, other incidental charges etc complete ... as per the direction of departmental officers.

13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.71:Lettering with black Japan pint of approved brand and manufacture

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

OD140141/2022-2023:Making Water level indicator in Aluminum / A.C.P. sheet of size 200 x 3500 mm with Vinyl printing/ Lettering with painting and providing in the tank with MS angle and fixing PVC pipe, Pulley arrangements, steel rope, Float arrangements, counter weight arrangements and Indicator including all conveyance, material, labour , consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD145481/2022-2023:Providing and fixing suitable numbers of Lightning arrester over O.H.S.R including cost of Copper spike, poles, copper flats, proper earthing, all conveyance, Labours, materials, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD277515/2022-2023:Supply and Fixing of 350 mm Dia CI Double Flanged Equilibrium Ball Float Valve Conforming to IS, by providing complete with bolts, nuts, rubber insertions, including labour charge, consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD72418/2023-2024:Providing and Supplying of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.0, Size 100mm. including cost of labour, materials, Consumables and other incidental charges etc... complete as per the direction of departmental officers.

OD72101/2023-2024:Providing and Supplying of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.0, Size 350mm. including cost of labour, materials, Consumables and other incidental charges etc... complete as per the direction of departmental officers.

PROVIDING F.H.T.Cs IN EZHUKONE GRAMA PANCHAYAT.

100.60.1.1.2:Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.

100.60.1.4.2: Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.

100.60.2.1.2:Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains from 140mm to 200mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.

100.60.3.1.1:Providing additional length of house connection pipe using 20mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers

100.60.10.4.1:Providing 20mm (1/2 inch) PVC Air Valve in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire for tools and labour charges etc. complete and as per the directions of the department officers.

100.60.12.3.1:Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers.

RENOVARION OF POCHAKKONAM CHIRA AND PROVIDING LEADING PIPE FROM K.I.P. CANAL TO POCHAKKONAM CHIRA.

100.7.2:Bailing out water with engine and pump set above 5HP up to 10HP including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

OD38399/2023-2024:Cleaning the Pond/ Chira/ Other Small Water source by removing mud, oranic and non organic waste materials, including safety, cost of labours, materials, tools etc complete as per the direction of departmental officers.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

100.98.119:Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia.

100.98.487:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm.

100.31.1.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class I.

100.38.1.3:Supply of spindle of suitable for 300mm Sluice valve from monolithic gun metal rod including turning, square cut deburring etc., complete.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

PROVIDING AND FIXING OF PRESSURE FILTER AND PROTECTION ROOF NEAR INTAKE WELL AT POCHAKKONAM CHIRA..

OD58864/2023-2024:Supply and erection of posts for roofing arrangements including cost of materials, Labour, consumables, and other incidental charges etc... complete as per the direction of departmental officers.

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

OD39069/2023-2024:Design, Fabrication, Supply, Installation & commissioning of a Duel media Pressure Filter:-Automatic MOC (Pressure Vessel) – MSEP, Type of Pressure Vessel - Vertical, Cylindrical with top and side manhole Shell Thickness - 10 mm, Dish Thickness - 10 mm, Frontal Piping - 6”; MS, Type of Valve - 6” Pneumatic Activated Butterfly Valves, Control Panel - PLC controlled Electrical panel with Touch screen Air Compressor - 1 No , Pressure Gauge - SS Liquid filled, providing suitable NRV, Filter Media - Anthracite with Minimum 90% Carbon Content, Graded Quartz Sand (8-16 & 16-30 Mesh) Depth of Filter Media - 800 mm, Supporting Under bed media - Graded Pebbles & Silex Depth of under bed media - 700 mm, Capacity - 25 m3/Hr (max), Specific flow rate - 20000 lit/Sq.m. hr. Automatic rinsing and back wash arrangement, The scope of work includes all related Civil work likes solid staging (PCC/RCC/RR Masonry as per requirement), mechanical and plumbing works and interconnection of the system at inlet and outlet with the pumping main, by pass arrangement. 2) GRAVITY FEED GAS CHLORINATOR- 1 NO Capacity - 2 Kg/Hr., Type - Wall Mounted, Filled Chlorine cylinders - 2 Nos (100 kg capacity each) (With Test certificate) Gravity Feed Gas Chlorinator is with all standard accessories such as Primary Filter, Chlorine control Valve, Diaphragm Chlorine pressure gauge, Mixing Chamber Assembly with Borosilicate Glass for Gas and water mixing, Secondary Filter, Solutionizer, Gas Bend, NRV Bend, Water bend, Diaphragm inlet and out let valves with Hylum board mounted on wall with complete inlet, outlet connections, Copper Tube with brass connectors for connecting the Gas Cylinder to the Chlorinator.

PROVIDING INTERCONNECTION OF INLET BETWEEN NEW OHSR AND OLD GLSR

OD50145/2023-2024:Interconnection of newly laid 100 mm/110 mm/ 150 mm/160 mm Dia M.S /G.I / D.I / PVC pipe with existing M.S/ G.I/AC/PVC pipe including cost of specials complete as per direction of Dept. officers.

OD58939/2023-2024:Interconnection of newly laid 350 mm Dia M.S /G.I / D.I pipe with existing M.S/ G.I/D.I/ A.C pipe including cost of specials complete as per direction of Dept. officers.

PROVIDING STAND BY PUMP SET.

RENOVATION AND PAINTING AND WINDIWS OF INTAKE WELL AT POCHAKKONAM.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

OD59040/2023-2024:Supply and Fixing of Aluminum Glazed shutters to Windows of Pochakkonam Intake Well

50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood

Bidder Name

sirajudeen