COMPREHENSIVE MAINTS TO MD AND OTM ACCN AND WELCOME MAINTENANCE AND PERIODICAL SERVICES INCLUDING MISC REPAIR WORK AT ICGS GANDHINAGAR UNDER GE (I) CG PORBANDAR

Amount

Schedule 'A' B/R

Resecuring or easing and adjusting without taking down Shutters of any description not exceeding 1.0 Sqm each by tightening hinges/screws and nailing etc., complete all as specified and directed by Engineer-in-Charge.

All as per item No- 01 above but exceeding 1.0 Sqm and not exceeding 2.0 Sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description not exceeding 1.0 Sqm each and re-fixing in same opening after easing, adjusting, repairing/ replacing hinges/ builders hardware etc., complete all as specified and directed by Engineer-in-Charge.

All as per item No- 03 above but exceeding 1.0 Sqm and not exceeding 2.0 Sqm each, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs aluminium anodised, barrel tower bolts of extruded section and fixed of 150mm long, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Aluminium anodised, barrel tower bolts of extruded section and fixed of 200mm long, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engineer-in-Charge.

All as per item No- 7 above but fixing only, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Butt hinges 100mm long, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Continuous (piano) hinges 30mm width of flap when opened, mild steel, bright finish or electrogalvanized, complete all as specified and directed by Engineer-in-Charge. Note- Taking down of shutters of CBs to be paid in respective above items.

Supply & Fixing in repairs extruded aluminium alloy handles 150mm long, fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Casement stays, size 300mm, with hinged joint and two plates, with studs, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Hasp and staple 125mm, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Door closer of aluminium dia extruded section body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed by Engineer-in-Charge.

All as per item No- 17 but fixing only above items, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete including making good the floor surfaces after installation, complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.

All as per item No- 21 from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 4mm thick Sheet glass, ordinary quality and glazing with wooden beads/ oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel /UPVC water tubing and connections,15mm bore, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel /UPVC water tubing and connections, 20mm bore, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel /UPVC water tubing and connections, 25-32mm bore, complete all as specified and directed by Engineer-in-Charge.

Re-fixing/ fixing only old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed by Engineer-in-Charge.

Re-fixing/ fixing only old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed by Engineer-in-Charge.

Re-fixing/ fixing only old steel tubing and connections 25-32mm bore in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 15mm water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 15mm bore Un-plasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 20mm water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 25mm water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 20mm bore Un-plasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 25mm bore Un-plasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed by Engineer-in-Charge.

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc. and cutting chase for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth in brick wall, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 40mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs CP (fancy type) Stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs fancy type CP Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs fancy type CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 100mm dia Swivel shower of PTMT any colour for fixing with 15mm pipe including Shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(Minimum weight 25mm-455gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 32mm bore waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Grating doom 125mm dia with waste hole of PTMT.(Minimum weight 40gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore dia of outlet of pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs looking mirror of size 450mm x 600mm with aluminium frame mounted on 6mm ply confirming to IS, with 2 Nos of hanging hooks fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for glazed ceramic coloured tiles 300x200x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for coloured vitrified tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 in floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for coloured vitrified tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00 sqm over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 in floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 67 & 68 above, but on vertical surfaces/ skirting over and including 10mm thick backing coat in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in Cement Mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in window cill, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 20mm thick granite slab/ tiles (of any type and colour) machine cut type, laid in floor, platforms and pillars etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding/rounding on edges if required and polishing over and including 15mm thick screed bed in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (without taking off shutters from frames ) size not exceeding 1.5 Sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (without taking off shutters from frames ) size exceeding 1.5 Sqm but not exceeding 4.00 sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down of shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Framed work (angle iron 45x45x5mm thick) as in doors / gates of angle or other section etc door to be prepared for hanging or sliding on hinges or rail etc Fe-290 (Gde E-165), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 30mm thick Flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed by Engineer-in-Charge.

Material & Labour Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturer’s instructions, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of prelam PVC sheet used instead of plain colour PVC sheet. Stiles and rails feathered at edges the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Anodised aluminium door/window/ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 150mm x 2 Nos in each door, hinges 3 Nos each and anodised aluminum snap beading screws etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Butt hinges 100mm long, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Aluminium anodised, barrel tower bolts of extruded section and fixed of 150mm long, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Extruded aluminium alloy handles 150mm long, fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing for 2nd class hardwood plain, solid, straight chowkhat of CBs and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Medium density fibre board interior grade 18mm thick solid construction type, fixed in CBs door shutters on timber frame work with screws /nails, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 0.9mm thick Decorative laminate type-1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing continuous (Piano) Hinges 30mm width of flaps, mild steel bright finish or electrogalvanized, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing butt hinges type B-12 or (overlay/ self / auto closing hinges) for cupboard / shelves shutters of size 125mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Pre-laminated particle board 9mm thickness, exterior grade pre-laminated both side with decorative choice lamination fixed to Aluminium frame work in doors/ partitions with beadings/ cleats etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair Vitreous china wash down water closet pan (pedestal pattern) white including connection to outgoing pipes and to flushing pipe, fixing of new Plastic water seat closet cover black/ white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs, vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste fittings/ coupling CP brass 32mm dia with long screwed shank, nuts, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs, vitreous china squatting pan, 'Orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & connection to CI 'P' trap, 100mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 10 ltr capacity PVC Valve less, syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and fitted to flush pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Plastic water seat closet cover black/ white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone masonry built in cement mortar including pillar etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for brick work with FLY ASH bricks straight or curved on plan exc. 6 Metre mean radius built in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

Material & Labour Brick work with Fly-ash Bricks straight or curved on plan to any radius in half brick thick walls built in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MS flat iron as in hold fasts and similar articles confirming to Fe- 310-0 and fixing in (PCC 1: 2 :4 bed block), complete all as specified and directed by Engineer-in-Charge.

Material & Labour for PCC 1:2:4 type B-1 using 20mm graded aggregate for bed block, covering on chajjas and kerbing on roof area etc., including necessary form work, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs for low density polythelyne (flexible) 32mm bore pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete as in outlet pipe for WHB etc., complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thick, including removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded aggregate as in plinth protection/ Paths etc., finished even & fair, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. finished even and rough to receiving top layers, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Rubber moulded Chequered cement concrete tiles 20 cm x 20 cm x 25mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:6 for laying floor finishes in floors, path / hard standing etc., with grey cement and pigment (Coloured Tiles), complete all as specified and directed by Engineer-in-Charge.

Material & Labour for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Glossy finished pre-polished (coloured) machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed by Engineer-in-Charge.

Providing cement concrete rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding, roof kerbing and mud stops etc. type C-1, 1:3:6 (20mm graded crushed stone aggregate), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers & waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description as in roof padding, coping, chajja etc. water tank bases on roof etc., unreinforced (other than ground floor), complete all as specified and directed by Engineer-in-Charge. Note:- Debris/demolished material to be removed out of MD land or 500 m away from the work place in low lying area.

Material & Labour for 25mm average thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof levelling course, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 10mm thick in Cement Mortar (1:3) on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. Note :- Water proofing compound to be measured & paid separately.

Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3.0 mm thick reinforced with pollster non wove fabric (wt. not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 on roof surfaced by forced application complete including taking down/removal of existing treatment, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying one coat of aluminium paint on app membrane, complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel/ FRP sheeting, any gauge, thickness etc as in roof covering/ wall cladding etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based Plain/ corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 2mm thick Fibre glass reinforced translucent corrugated with two corrugations side lap fixed with coach screw and washer in roof and / plain sheeting in wall cladding / fencing on iron frame etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 12mm thick perforated particle boards/ tiles fixed in ceiling for insulation/ acoustic purposes with water proof topping of size 600mm x 600mm of (Armstrong/ gyprocks), fixed to snap grid or aluminium frame work, complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall/partition wall and ceiling boards (Fibre, pulp insulation etc.) of any thickness including cover fillets and frame work, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 12mm thick perforated particle boards/ tiles fixed in ceiling for insulation/ acoustic purposes with water proof topping of size 600mm x 600mm of (Armstrong/ gyprocks), fixed to snap grid or aluminium frame work, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 605mm x 605mm size anodised aluminium snap grid frame work for false ceiling including hangers of 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia., 40mm long, complete all as specified and directed by Engineer-in-Charge.

All as per item No-124 above but repair/ fixing only by tightening/ fixing of binding wire or mild steel 4mm dia wire, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair of Mortice lock aluminium anodised vertical type 04 levers 100mm size with keys, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous China table top wash hand basin white size 160mm x 495mm x 365mm including waste fittings, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china extended wall hung WC white bowl size 775mm x 360mm x 660mm including dual flush fitting and cistern and including soft close seat cover, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china urinals with sensor size 710mm x 485mm x 300mm including sensor (Sensotronic sensor flushing valve for urinal with complete kit (suitable for urinal), complete all as specified and directed by Engineer-in-Charge.

Cleaning and maint of sewage system including removing all type of blockage from wash hand basins, bottle trap, kitchen sink, water closet sewage lines of any dia, manholes, by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc for sewage cleaners to attend the sewage complaint. Any complaint which is not completed within 24 hours from the time of issue of complaint, compensation will be charged @Rs. 200/- per day in addition to above every additional day delayed will be charged @Rs. 50/- per day.) No of complaints has to be paid to the contractor as each.

Excavating in trenches, not exceeding 1.5 Metre wide & not exceeding 1.5 Metre in depth; for foundation etc., not exceeding 10 Sqm on plan & not exceeding 1.5 Metre in depth & getting out in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

All as per above Item No. 132 Ditto but depth exceeding 1.50 Metre but not exceeding 3.00 Metre, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil not exceeding 50 Metre & depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required, complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes salt glazed ware 150mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D-2, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Slat-glazed stoneware drain pipes laid in trenches & jointed as specified of 150mm dia, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 35mm thick factory made plain, framed, panelled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 35mm thick factory made second class hardwood glazed and Skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25-metre-long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs CP Soap dish, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs CP Tumbler with holder, complete all as specified and directed by Engineer-in-Charge. Make - Cera, Cat part No- F5002107(Montana) or equivalent make mentioned in Appendix 'B'.

Supply & Fixing in repairs CP Overhead rain shower - ABS type Square 180x180mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Corner glass shelf 300mm x 300mm with "F" type brackets, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs Pre-laminated particle board 18/19mm thickness, exterior grade pre-laminated both side with decorative choice lamination fixed to Aluminium frame work in doors/ partitions/ CBs shelves etc with beadings/ cleats etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 25mm dia Curtain /Drapery rod, anodised aluminium alloy with ornamental brackets 02 Nos for each doors/windows etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing bright finished coloured aluminium anodised alloy ornamental finish type brackets/ knobs for 20/25mm dia curtains / drapery rod, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair of Aluminium alloy door cills having rubber strips in bottom, fit to door size, complete all as specified and directed by Engineer-in-Charge.

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 10mm thick on fair faces of brick work in Cement Mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 15mm thick on fair faces of brick work in Cement Mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 5mm thick on ceiling surfaces in Cement Mortar 1:3, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying two coats of OBD on newly plastered surfaces over a coat of primer over a coats of wall care putty 1mm thick including preparing the new wall surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of newly plastered surfaces of ceiling and and applying Two coat of oil emulsion distemper (OBD) over a coat of putty 1mm thick including preparation of new surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 1mm thick wall care putty, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD), complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Preparation of old decorated surfaces of Ceiling spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of distemper oil emulsion (OBD) on ceiling surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Complete removal of existing treatment and preparation of old decorated surfaces of walls, cornices by applying two coat of oil emulsion distemper, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 2mm thick wall care putty for smooth finishes of old plastered surfaces of wall, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 2mm thick wall care putty for smooth finishes of old plastered surfaces of ceiling, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Complete removal of existing treatment and preparation of old decorated surfaces of ceiling and applying two coat of distemper oil emulsion (OBD) on ceiling surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old surfaces of wall and applying two coat of Cement base paint, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of Synthetic enemal paint, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of Synthetic enemal paint, complete all as specified and directed by Engineer-in-Charge.

Cleaning of existing water tanks exceeding 2000 ltr but not exceeding 5000 ltr capacity including under-ground sumps, removing all loose scale, dust, dirt etc from tanks and from mouths of circulating pipes etc and spreading bleeching powders in bottom of tanks, complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks exceeding 250 Litre and not exceeding 500 Litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and directed by Engineer-in-Charge. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exceeding 500 Litre and not exceeding 1000 Litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and directed by Engineer-in-Charge. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exceeding 1000 Litre and not exceeding 3000 Litre (including UG sumps), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and directed by Engineer-in-Charge. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Material & Labour for preparation of old concrete surfaces and applying one coats of plastic emulsion paint, complete all as specified and directed by Engineer-in-Charge.

divyarsh entrprise (BID ID -3238476)

UMA CONSTRUCTION (BID ID -3233119)