ADDN/ALTN OF AC CORRUGATED SHEET OF BLDG NO T-11, T-63 AND T-721 OF 9 JAT AND SPECIAL REPAIR TO DRANIAGE SYSTEM FROM STB(D) TO CAWNPORE GATE AT BEG AND CENTRE ROORKEE UNDER GE ROORKEE

Amount

Dismantling asbestos cement corrugated or semi corrugated sheet in roof and removal from site complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm (AZ-150) thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm (AZ-150) thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling timber fillets, rails, posts, rafters, purling etc under 40 sq. cm in section unframed work in any position complete all as specified and directed.

S&F MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E-250 quality-A) complete all as specified and directed.

Dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site for taking into schedule of credit complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed

Taking down old cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing downwith water, etc rubbish off premises complete all as specified and directed.

M&L for Providing and fixing false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC.

M&L Rendering 15 mm thick in CM (1:4) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 12 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

Demolition of cement concrete in above ground floors and pavings not exc 15 cm thickness below or above GL complete all as specified and directed.

M&L PCC (1:2:4) type B-0 using 12.5 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

Removing excavated meterial exc 50 m and n exc 250m depositing where directed at a level n exc 1.5 m above starting point in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in surface channels foundation & mass concrete and drains complete all as specified and directed

M&L for 10mm thick cement plaster in CM (1:4) on stone/ block masonry surfaces finished even and fair without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form moulds mitred/stopped ends etc complete all as specified and directed.

M&L TMT bars 10mm and over dia cut to length bent to shape required including bending hooking binding with mild steel wire not less than 0.90mm dia complete all as specified and directed.

M&L for precast RCC slab (1:2:4) type B1 using 20mm graded aggregate set CM 1:6 as in cover slab complete all as specified and directed.

Construction of Soakage wells (3.00m Dia and 6.00m in depth) excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and as per Drg No TD/309/Sheet No 1/4 to 4/4.

M&L for RCC hume pipes 150 mm, class NP3 and jointed complete with collars complete all as specified and directed.

M&L concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete type C2 (1:3:6) (40 mm) graded aggregate complete all as specified and directed.

Dismantling and taking down carefully U/S copper/aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

M&L for point wiring with1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way non modular switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way non modular switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way non modular switch complete all specified and directed.

All as per item No 29 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz complete all as specified and directed.

S&F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F fan regulator, stepped type, electronic (socket type),100 watt compatible with BLDC fan complete all as specified and directed.

M&L ceiling rose 3 terminal/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCB SP 25 Amps all as specified and directed.

S&F MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar of suitable size, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

S&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with suitable rated busbar, minimum ingress protection of IP40 complete all as specified and directed.

S&F MCB, SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

S&F in repair LED tube light batten 20 watts 4 fts extruded polycarbonate housing, translucent diffuser with LED light source, minimum 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F in repair LED 30 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver, including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

S&F in replacement of surface/recessed mounted LED panel light 2'x2' size, 36 watts, full white/warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP/Amstrong/grid false ceiling complete with all fixing accessories including making electrical connection with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified.

S&F sub main wiring two single core 6.00 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed. Note: Three runs of 6.00 sqmm wire alongwith one run of conduit will be measured as one unit.

S&F sub main wiring two single core 4.00 sqmm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed. Note: Three runs of 4.00 sqmm wire alongwith one run of conduit will be measured as one unit.

S&F BLDC Ceiling fan complete with three blades down rod, accessories 230 V, 1200mm sweep with minimum air delivery of 210 CFM, service value more than 6.0 complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard

Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/through HDPE pipe under roads of size 25 sqmm 4 core complete all as specifed and directed.

All as above but 2 core 16sqmm

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/ foundation etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/ floors/ duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50 mm bord complete all as specified and directed.

S&F GI tubing light grade ISI marked of 50 mm bore dia complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240x200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed. Note :- On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

nautiyalandcompany (BID ID -3456690)

BHAGAT JI ENTERPRISES (BID ID -3456938)

M/S RAJESH ARORA (BID ID -3455075)

RAJENDER CONSTRUCTION CO (BID ID -3456999)