GENERAL RM 2025 26 RC 2 Phase 1 Running Contract Karanthoor Medical college road km 0 000 to 5230 and Varattiyakkal Peringolam CWRDM Road Ch0000 2280 and Ch 2515 3253 under Roads Section Kunnamangalam 8.248 kms

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD147598/2025-2026:Mixed Seal Surfacing & ndash; Manual means Type ABitumen VG 30 Providing , laying and rolling of close- graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type-A) aggregates using viscosity grade bitumen (VG-30 ) to the Required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 KN static roller , and finishing to required level and grade as per technical specification

OD147597/2025-2026:Dry rubble masonry including cost and conveyance of all materials and all labour charges conveyance etc completes

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.