Development of Children Park and open Air Gym at MC Rajouri (Bella Colony) under Capex Budget.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6 using 20% plum of nallah split stone ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed

12 mm thick cement sand plaster in1:6 cement sand mortar

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Centering and Shuttering including strutting, propping etc and removal of form work for mass concrete

Foundations, footings, bases for columns

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand)Medium shade using 50% white cement and 50% ordinary cement.

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Exercising Bar) : Providing and designing and fixing of exercising bar in a pair of size 1800x630x1700mm fabricated with main post of 114mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated .All pipe are welded with joints calloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. base plate cover to be made from plastic withrounded edges to prevent any impact of injury and UV resistant. Bearing usedshall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixedon ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and boltswith the base plate. All complete as per direction and approval of engineer-inchargeregarding material, shape of equipment, colour on metal, seat and base over plate and fixing of equipments etc. NSI

Providing installing and commissioning (Sit-up Station) Equipment made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - 1500 X 1150 X 650 mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-002 NSI

providing installing and commissioning Outdoor GymHorse Rider Station Equipment made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - 1000 X 600 X 1100 mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life. * J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-004 NSI

Providing installing and commissioning outdoor gym Leg PressEquipment made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - 2000 X 550 X 1600 mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-006 NSI

Providing installing and commissioning Gym Equipment Pull Chair made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - 2000 X 550 X1600 * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation.* Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-007 NSI

Providing installing and commissioning Outdoor Gym Equipment Leg Press made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - 1775 mm x 1900 mm x 580 mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter.* Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation.* Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-007 NSI

Providing installing and commissioning Open Gym Equipment SeatedChess Press made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 1800 X 700 X 2000 mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter.* Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life. * J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-009 NSI

Providing installing and commissioning Open Gym Equipment Arm Wheel made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 850 x 800 x 1800 mm mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter.* Thickness of pipes varies between 3.5 mm to 7.5 mm.* Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation.* Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-010 NSI

Providing installing and commissioning Open Gym Equipment Triple Twisteris made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 1700 X 1300 X 1300 mm mm * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-013 NSI

Providing installing and commissioning Outdoor Exercise Equipment Air Swing made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 1150 X 900 X 1250 * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter.* Thickness of pipes varies between 3.5 mm to 7.5 mm.* Self lubricating German bearing for maintenance free usage.* Rain forced foot pedals for extended life.B28* J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant.* All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. Item Code: JMG-003 NSI

Providing installing and commissioning Outdoor eclliptical exerciser made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 47 X 21 X 63 in * Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm. * Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life. * J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. NSI

providing installing and commissioning Outdoor SHOULDER PRESS SERIES 60 made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 54 X 64 X 47 in * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm.* Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life. * J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. NSI

Providing installing and commissioning Outdoor Combination Fitness Equipment CHIN UPS PUSH UPS made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment.Dimensions of Equipment - Dimensions of Equipment - 1420 X 1230 X 2130 * Epoxy coating of at least 100 micron to prevent any damage from weather conditions. * Thick galvanized main post of 114 mm diameter. * Thickness of pipes varies between 3.5 mm to 7.5 mm.* Self lubricating German bearing for maintenance free usage. * Rain forced foot pedals for extended life. * J hook system with 18 mm thickness used for grouting for stability and ease of installation. * Non fading Virgin LLDPE makes all plastic components sun fade resistant. * All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety. NSI

62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Providing and fixing OK Play Funstation Economy Model Backyard Slide - Green Red for 3 Years+ childrens over the pcc foundation in m-25 , L 609 x B 475 x H 304 cm, Carrying capacity 100 Kg, easy to assemble in your backyard, designed with no sharp edges for kids complete job

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips40 mm wide and 4 mm thick

Providing and fixing high quality rubber gym floor interlocking tiles exterior quality in required colour and pattern complete job NSI

Providing & fixing at or near ground level precast cement concrete in kerbs,, edging etc as per approved patterns and setting in position with cement mortar 1:3(1 cement:3 coarse sand) including the cost of required centring, shuttering and curing complete1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)

Providing MS Strip cast iron benches with arm rest 3 seater of required colour NSI

OK Play Funstation Backyard Play Unit - Red Green 3 Years+, L 566 x B 353 x H 304 cm, Carrying capacity 100 kg, A sturdy and durable play unit with slide and swings made from weather resistant material NSI

Construction of pedestal of size 5'x7'x1' of brick masonary with required wall tiles plaster painting curtain rods and laser printed grenite with reqired matter inclusive of all carriages complete job NSI

Carriage of material from source to site of work by mechanical transport including loading/ unloading and stacking complete.

Sand for an average distance of 120 kms by M.T

Stone aggregate below 40 mm nominal size for an average distance 10 kms by M.T

Koushal Gupta

waseem ahmed

Gulzar Hussain

MOHD FAROOQ SHAWL