Providing WSS to Khun Bandal, Dugha , Shigan, Jaban Namohag, Bakhnow , Majhadesh, Chowai, Karshaigad, Ropa Showad, Bishaladhar etc. in Anni Block Distt Kullu HP

Booster-I (Bore-I) Supply of submersible pumping set of (KSB /Kalama/Kirloskar/Johnston/Cromption/BS) or any other approved make conforming to IS latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to IS (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-)15% of the duty point head. The motor /motors cofirming to minimum IE2 norms IS-12615/2011 with up to date amendments.It should include cost of bearing nuts, bolts and pointing etc. The pump set should be capable to perform the following duties:-

Discharge (Q)pump 2.98 LPS for each

Total Dynamic head:- 112.57 meter

Length 360.00 meter

Dia 65 mm

Level at highest discharge point 1187 meter

Level pump shaft level 1088.00 meter

LWL in borewell (h) 1087.00 meter

Pumping hours 8 Hours

Suction lift 1.00 (+ve )

Discharge head 112.57 meter

Residual head 1.00 meter

Static head 100.00 meter

Altitude of installation above MSL 1087.00 meter

Temperature 20 degree centigrade.

Characterstics of water Clear water with turbidity up to 50 PPM.

Pump Specifications:-

Model

No. of stages

Material manufactures certificate to be appended

Discharge

Motor Rating (KW)

Speed

BHP absorbed

Efficiency

NPSH (K)

Providing Double flanged Leader / Pelican /Kirloskar make Cast iron Sluice Valve in delivery side conf. to Class IS 780 PN 1.0; one size higher than delivery outlet size of pump (suitable dia)

Providing Double flanged Leader / Pelican /Kirloskar make Cast iron Swing check type Reflux Valve in delivery side conf. to Class IS 5312 PN 1.0; one size higher than delivery outlet size of pump (suitable dia)

Prov. and laying PVC Insulated armoured copper conductor cable Havells/Gloster/Khaitan make of suitable size and suitable for motor offered under item No I complete with flexible pipe and couplers from HPSEB meter to Panel, switch, starter complete job, The type and size shall be subject to approval of Electrical authorities and in case of its non acceptance the same shall be replaced free of cost by the tenderer

Supply side:- …10...sqmm

Providing 100 mm dial pressure guage of Fiebig/Bourden make having range 0-7 Kg/cm^2 with copper tubing, stop cock and allied access.as per IS 3624 - 1987 latest with up to date amendments

Supply of cable for water level guard

Supply of supporting clamps

Supply of cable clips of required size

Providing and fixing DOL starter of 1.5 to 7.5 H.P.of (Mu-G 10H) L/T make as per relavent IS: specification with upto date amendments to be mounted on panel board with magnetic type overload relay ,Ampare Meter ,voltmeter, indicating lamps etc. complete in all respect.

Erection of all equipments from Sr No 1 to 9 including cost of tee's bends, tappers and any other required fitting as per site condition and directions of engineer In charge.