NIT NO. 17 ITEM NO. 19

Providing of Non-clog sewage pump with SS Impeller, CI Body, SS Shaft &Sleeve ; RPM: 1450, Discharge: 400 m³/hr, Head:20mtr. Make: WILO M&P/KBL/JYOTI/DJB approved Supply of 45 Kw, 1450 rpm, Standard Totally Enclosed Fan Cooled (TEFC), Enclosure Conforming to protection IP55 as per IS:4691‐1968, suitable for operation on 415±10%, 3‐Phase, 50Hz±5%, AC Supply with class 'F' insulation for an ambient of 50 Deg.C Make: CG/Kirloskar/ABB/DJB approved make. Providing of coupling & guard, base frame etc. for above pump set.

Supply / fabrication of base stand / frame made out of Angle Iron of suitable size for fixing the above Panel having height of minimum 300 mm and suitable for making outgoing /incoming cable entries in the panel. It should be duly painted and ready with provisions for installing at the site.

Providing of Flat 3 Core copper conductor PVC Insulated & PVC Sheathed Industrial Cable of 35mm2, 1100 Volt, conforming to IS 694Make: Havells/DJB Approved

Providing the Sluice valve PN:1 size 150 mm Make : Kirloskar/IVC

Providing the NRV PN:1 size 150 mm Make : Kirloskar/IVC

Providing the hard ware goods for erection the suction and delivery line at site.

Fabrication/Spply of the Suction line /Bend (1Nos.) made out from B class M.S Pipe Size 150 N.B 15mtr. approx. duly flanged as per site requirement.

Providing the Delivery line gap piece,/Bend (02Nos.) made out from B class M.S Pipe Size 150 N.B. duly flanged as per site requirement.

Fixing of MS Base frame on the foundation, Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Providing the Hut type arrangement at the pump setby electric welding set, manual labour and civil work as per site requirement.

Testing commissioning the same on NO load/ Full Load. With to and Fro charges.

CHANDERA BUILDERS