Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC | L1 | Accepted-AOC L1 ACCEPTED and approved by committee.Agreement executed | |
| 2 | L2₹5.9 L+₹31,304.90 (5.58%)Rejected-Finance | L2 | Rejected-Finance L1 ACCEPTED and approved by committee. | |
| 3 | L3₹6.2 L+₹55,657.83 (9.92%)Rejected-Finance | L3 | Rejected-Finance L1 ACCEPTED and approved by committee. |
Tender Value
₹6.8 L
EMD Value
₹16,939
Closing Date
13 Jan 2023, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER, LIDEW SECTION, KODAKARA- 680684
Annual PlanKODAKARA GP202223PR NO181Pazhampilly GramaMandhiram Renovation Ward9
2023_LSGD_546381_4
4-ET/AE/LIDEW/KDA/2022-23
Open Tender
Civil Works - Buildings
Item Rate
180 days
KODAKARA GRAMA PANCHAYATH
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,495
₹16,939
Yes
23 Feb 2023
5 Jan 2023
16 Jan 2023
5 Jan 2023
13 Jan 2023
5 Jan 2023
Amount
Building renovation
OD303516/2022-2023: MANCOOLIES
OD305000/2022-2023:Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer -in -charge)0.35 mm (+0.05%),total coated thickness with zinc coating 120grams per sqm as per IS:277 ,IN 240 mpa steel grade ,5-7 microns epoxy primer on both side.of the sheet and polyester top coat 15-18 microns.sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer - in -charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlind,rafters and trusses and including cutting to size and shape wherever required.
OD303529/2022-2023:SUPPLYING AND FIXING 150 mm SQUARE PVC HALF CUT SECTIONS WITH BRACKETS AT THE END OF THE SHEET OR TILED ROOF FOR RAINWATER COLLECTION INCLUDING ALL COST OF MATERIAL, LABOUR, CONVEYANCE CHARGE ETC COMPLETE
OD306219/2022-2023:Ridge caping with pre painted galvanised steel sheets .5mm thick 60 cm wide including all cost and materials, conveyance, labour charges etc
11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
OD304781/2022-2023:RCC Door frame 1.80mx0.75m including hold fast etc. and fitting charges.
15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below
2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
OD307134/2022-2023:(From DAR 10.6.3) Repairing and refixing existing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover
50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend
Anjana K S
M J JOSEPH
Bidder Name
Laiju V.P.
M J JOSEPH
Anjana K S
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_799306.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .