Procurement of Advanced Toolkits for Handicraft and furniture making (Package 1)

Amount

ADVANCED TOOLKIT SET FOR BAMBOO FURNITURE- Bevel / Square Chisel ½ inch &1 inch Specifiction: Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm

Wood handle hacksaw with extra blades Specification: 300 mm Wood handled hacksaw with one extra blades

Ball peen Hammer 250 Gm. With Wood Handle 12 inches Specification: Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12", weight: 9 OZ

Measuring Tape 3 meters Specification: Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size

Steel Scale 12 inches & 24 inches Specification: Stainless steel 202 grade sacle ruler 30 cm & 60 cm, with inside edges polished and grinded,Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm,Reverse side : conversion table ,Inch to mm

Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm Specification: Three sqaure 2nd Cut File with handle, Size: 150 mm

Tri-square 6 inches Specifiction: Try Square, weight : 170 gm, length: 150 mm, Stainless steel blade 202 grade

Angle finder – Arm rule Specification: The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish.

Bamboo Splitting knife ( Dau) Specification: Steel DAU ,local made with wooden Handle

Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6" x 2" x 1", High strength, smooth surface,

Cutting pliers Specification: 200 mm, Made from Cr-vd material

Screw driver set Specification: Kit Comprising of 5 pcs with neon bulb

Hand plainer (small) Specification: 125mm or 5", Hand Block Planer

Power drill Specification: 10 mm Impact Drill Machine Rated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. Drill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories. Accessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs

Hand held angle grinder 4 inch Specification: 100mm Angle Grinder Angle Grinder 100 mm having Rated Input Power-660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3). Accessories- protection guard, clamping flange, locking nut, wrench

Hot Air Gun Specification: Variable Airflow: 350, 350, 550 lt/min , corresponding temperature at nozzle outlet- 60, 350, 550 degree celcius: , Power input 1800 watt with overheat protection, Voltage 230V, weight according to EPTA Procedure 01:2014 should be <= 0.75 kg. Width-83 mm, Length-238 mm and Height- 244 mm, Sound Pressure should be less than 70 db, should have a flat surface at the back for keeping the tool on the ground in idle condition, Accessories- Reduction Nozzle

Drill bit set Specification: Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle

Gas blow torch complete set ready to use Specification: Butane Gas Blow Torch,125 gm,

Fastener drill bet set Specification:chisel head drill bit set

Bag for tools Specification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package

IMPROVED TOOLKIT SET FOR HANDICRAFTS ACCESORY PRODUCTS-- Bevel / Square Chisel 1/2 inch & 1inch Specification:Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm

Wood handle hacksaw with extra blades Specification: 300 mm Wood handled hacksaw with one extra blades

Fret saw (hack saw – small) Specification:A Flat bar Frame with dura Steel Pins, Hi Speed Steel Blade

Ball peen Hammer 250 Gm. With Wood Handle 12 inches Specification:Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12", weight: 9 OZ

Measuring Tape 3 meters Specifcation:Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size

Steel Scale 12 inches Specification:Stainless steel 202 grade sacle ruler 30 cm, with inside edges polished and grinded Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm, Reverse side : conversion table ,Inch to mm

Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm Specification:Three sqaure 2nd Cut File with handle, Size: 150 mm

Tri-square 6 inches Specification: Try Square, length: 150 mm, Stainless steel blade 202 grade

Angle finder – Arm rule Specification:The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish.

Bamboo Splitting knife ( Dau) Specification: Steel DAU ,local made with wooden Handle

Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6" x 2" x 1", High strength, smooth surface,

Cutting pliers Specification: 200 mm, Made from Cr-vd material

Screw driver set Specification: Kit Comprising of 5 pcs with neon bulb

Hand planner (small) Specification: 125mm or 5", Hand Block Planer

Hand held Power Drill Specification: 10 mm Impact Drill Machine Rated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. Drill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories. Accessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs

Hand held angle grinder 4 inch Specification: 100mm Angle Grinder Angle Grinder 100 mm having Rated Input Power 660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3). Accessories- protection guard, clamping flange, locking nut, wrench

Drill bit set Specification:Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle

Bag for the tools Specification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package

National Cooperative Consumer Federation of India Ltd.

MAVERICK TECHNOLOGIES